;;
powerpc*-*-*)
cpu_type=rs6000
- extra_objs="rs6000-string.o rs6000-p8swap.o rs6000-logue.o rs6000-call.o"
+ extra_objs="rs6000-string.o rs6000-p8swap.o rs6000-logue.o"
+ extra_objs="${extra_objs} rs6000-call.o rs6000-pcrel-opt.o"
extra_headers="ppc-asm.h altivec.h htmintrin.h htmxlintrin.h"
extra_headers="${extra_headers} bmi2intrin.h bmiintrin.h"
extra_headers="${extra_headers} xmmintrin.h mm_malloc.h emmintrin.h"
esac
extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-logue.c \$(srcdir)/config/rs6000/rs6000-call.c"
+ target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-pcrel-opt.c"
;;
pru-*-*)
cpu_type=pru
;;
rs6000*-*-*)
extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
- extra_objs="rs6000-string.o rs6000-p8swap.o rs6000-logue.o rs6000-call.o"
+ extra_objs="rs6000-string.o rs6000-p8swap.o rs6000-logue.o"
+ extra_objs="${extra_objs} rs6000-call.o rs6000-pcrel-opt.o"
target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-logue.c \$(srcdir)/config/rs6000/rs6000-call.c"
+ target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-pcrel-opt.c"
;;
sparc*-*-*)
cpu_type=sparc
--- /dev/null
+;; Machine description for the PCREL_OPT optimization.
+;; Copyright (C) 2020-2021 Free Software Foundation, Inc.
+;; Contributed by Michael Meissner (meissner@linux.ibm.com)
+
+;; This file is part of GCC.
+
+;; GCC is free software; you can redistribute it and/or modify it
+;; under the terms of the GNU General Public License as published
+;; by the Free Software Foundation; either version 3, or (at your
+;; option) any later version.
+
+;; GCC is distributed in the hope that it will be useful, but WITHOUT
+;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+;; or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+;; License for more details.
+
+;; You should have received a copy of the GNU General Public License
+;; along with GCC; see the file COPYING3. If not see
+;; <http://www.gnu.org/licenses/>.
+
+;; Support for the PCREL_OPT optimization. PCREL_OPT looks for instances where
+;; an external variable is used only once, either for reading or for writing.
+;;
+;; If we are optimizing a single read, normally the code would look like:
+;;
+;; (set (reg:DI <ptr>)
+;; (symbol_ref:DI "<extern_addr>")) # <data> is currently dead
+;;
+;; ... # insns do not need to be adjacent
+;;
+;; (set (reg:SI <data>)
+;; (mem:SI (reg:DI <xxx>))) # <ptr> dies with this insn
+;;
+;; We transform this into:
+;;
+;; (parallel [(set (reg:DI <ptr>)
+;; (unspec:SI [(symbol_ref:DI <extern_addr>)
+;; (const_int <marker>)]
+;; UNSPEC_PCREL_OPT_LD_ADDR))
+;; (set (reg:DI <data>)
+;; (unspec:DI [(const_int 0)]
+;; UNSPEC_PCREL_OPT_LD_DATA))])
+;;
+;; ...
+;;
+;; (parallel [(set (reg:SI <data>)
+;; (unspec:SI [(mem:SI (reg:DI <ptr>))
+;; (reg:DI <data>)
+;; (const_int <marker>)]
+;; UNSPEC_PCREL_OPT_LD_RELOC))
+;; (clobber (reg:DI <ptr>))])
+;;
+;; The marker is an integer constant that links the load of the external
+;; address to the load of the actual variable.
+;;
+;; In the first insn, we set both the address of the external variable, and
+;; mark that the variable being loaded both are created in that insn, and are
+;; consumed in the second insn. It doesn't matter what mode the register that
+;; we will ultimately do the load into, so we use DImode. We just need to mark
+;; that both registers may be set in the first insn, and will be used in the
+;; second insn.
+;;
+;; Since we use UNSPEC's and link both the the register holding the external
+;; address and the value being loaded, it should prevent other passes from
+;; modifying it.
+;;
+;; If the register being loaded is the same as the base register, we use an
+;; alternate form of the insns.
+;;
+;; (set (reg:DI <data_ptr>)
+;; (unspec:DI [(symbol_ref:DI <extern_addr>)
+;; (const_int <marker>)]
+;; UNSPEC_PCREL_OPT_LD_SAME_REG))
+;;
+;; ...
+;;
+;; (parallel [(set (reg:SI <data>)
+;; (unspec:SI [(mem:SI (reg:DI <ptr>))
+;; (reg:DI <data>)
+;; (const_int <marker>)]
+;; UNSPEC_PCREL_OPT_LD_RELOC))
+;; (clobber (reg:DI <ptr>))])
+
+(define_c_enum "unspec"
+ [UNSPEC_PCREL_OPT_LD_ADDR
+ UNSPEC_PCREL_OPT_LD_DATA
+ UNSPEC_PCREL_OPT_LD_SAME_REG
+ UNSPEC_PCREL_OPT_LD_RELOC
+ UNSPEC_PCREL_OPT_ST_ADDR
+ UNSPEC_PCREL_OPT_ST_RELOC])
+
+;; Modes that are supported for PCREL_OPT
+(define_mode_iterator PCRELOPT [QI HI SI DI TI SF DF KF
+ V1TI V2DI V4SI V8HI V16QI V2DF V4SF
+ (TF "TARGET_FLOAT128_TYPE && TARGET_IEEEQUAD")])
+
+;; Vector modes for PCREL_OPT
+(define_mode_iterator PCRELOPT_VECT [TI KF V1TI V2DI V4SI V8HI V16QI V2DF V4SF
+ (TF "TARGET_FLOAT128_TYPE && TARGET_IEEEQUAD")])
+
+;; Insn for loading the external address, where the register being loaded is not
+;; the same as the register being loaded with the data.
+(define_insn "pcrel_opt_ld_addr"
+ [(set (match_operand:DI 0 "base_reg_operand" "=&b,&b")
+ (unspec:DI [(match_operand:DI 1 "pcrel_external_address")
+ (match_operand 2 "const_int_operand" "n,n")]
+ UNSPEC_PCREL_OPT_LD_ADDR))
+ (set (match_operand:DI 3 "gpc_reg_operand" "=r,wa")
+ (unspec:DI [(const_int 0)]
+ UNSPEC_PCREL_OPT_LD_DATA))]
+ "TARGET_PCREL_OPT
+ && reg_or_subregno (operands[0]) != reg_or_subregno (operands[3])"
+ "ld %0,%a1\n.Lpcrel%2:"
+ [(set_attr "prefixed" "yes")
+ (set_attr "type" "load")
+ (set_attr "loads_external_address" "yes")])
+
+;; Alternate form of loading up the external address that is the same register
+;; as the final load.
+(define_insn "pcrel_opt_ld_addr_same_reg"
+ [(set (match_operand:DI 0 "base_reg_operand" "=b")
+ (unspec:DI [(match_operand:DI 1 "pcrel_external_address")
+ (match_operand 2 "const_int_operand" "n")]
+ UNSPEC_PCREL_OPT_LD_SAME_REG))]
+ "TARGET_PCREL_OPT"
+ "ld %0,%a1\n.Lpcrel%2:"
+ [(set_attr "prefixed" "yes")
+ (set_attr "type" "load")
+ (set_attr "loads_external_address" "yes")])
+
+;; PCREL_OPT modes that are optimized for loading or storing GPRs.
+(define_mode_iterator PCRELOPT_GPR [QI HI SI DI SF DF])
+
+(define_mode_attr PCRELOPT_GPR_LD [(QI "lbz")
+ (HI "lhz")
+ (SI "lwz")
+ (SF "lwz")
+ (DI "ld")
+ (DF "ld")])
+
+;; PCREL_OPT load operation of GPRs. Operand 4 (the register used to hold the
+;; address of the external symbol) is SCRATCH if the same register is used for
+;; the normal load.
+(define_insn "*pcrel_opt_ld<mode>_gpr"
+ [(parallel [(set (match_operand:PCRELOPT_GPR 0 "int_reg_operand" "+r")
+ (unspec:PCRELOPT_GPR [
+ (match_operand:PCRELOPT_GPR 1 "d_form_memory" "m")
+ (match_operand:DI 2 "int_reg_operand" "0")
+ (match_operand 3 "const_int_operand" "n")]
+ UNSPEC_PCREL_OPT_LD_RELOC))
+ (clobber (match_scratch:DI 4 "=bX"))])]
+ "TARGET_PCREL_OPT
+ && (GET_CODE (operands[4]) == SCRATCH
+ || reg_mentioned_p (operands[4], operands[1]))"
+{
+ output_pcrel_opt_reloc (operands[3]);
+ return "<PCRELOPT_GPR_LD> %0,%1";
+}
+ [(set_attr "type" "load")])
+
+;; PCREL_OPT load with sign/zero extension
+(define_insn "*pcrel_opt_ldsi_<u><mode>_gpr"
+ [(set (match_operand:EXTSI 0 "int_reg_operand" "+r")
+ (any_extend:EXTSI
+ (unspec:SI [(match_operand:SI 1 "d_form_memory" "m")
+ (match_operand:DI 2 "int_reg_operand" "0")
+ (match_operand 3 "const_int_operand" "n")]
+ UNSPEC_PCREL_OPT_LD_RELOC)))
+ (clobber (match_scratch:DI 4 "=bX"))]
+ "TARGET_PCREL_OPT"
+{
+ output_pcrel_opt_reloc (operands[3]);
+ return "lw<az> %0,%1";
+}
+ [(set_attr "type" "load")])
+
+(define_insn "*pcrel_opt_ldhi_<u><mode>_gpr"
+ [(set (match_operand:EXTHI 0 "int_reg_operand" "+r")
+ (any_extend:EXTHI
+ (unspec:HI [(match_operand:HI 1 "d_form_memory" "m")
+ (match_operand:DI 2 "int_reg_operand" "0")
+ (match_operand 3 "const_int_operand" "n")]
+ UNSPEC_PCREL_OPT_LD_RELOC)))
+ (clobber (match_scratch:DI 4 "=bX"))]
+ "TARGET_PCREL_OPT"
+{
+ output_pcrel_opt_reloc (operands[3]);
+ return "lh<az> %0,%1";
+}
+ [(set_attr "type" "load")])
+
+(define_insn "*pcrel_opt_ldqi_u<mode>_gpr"
+ [(set (match_operand:EXTQI 0 "int_reg_operand" "+r")
+ (zero_extend:EXTQI
+ (unspec:QI [(match_operand:QI 1 "d_form_memory" "m")
+ (match_operand:DI 2 "int_reg_operand" "0")
+ (match_operand 3 "const_int_operand" "n")]
+ UNSPEC_PCREL_OPT_LD_RELOC)))
+ (clobber (match_scratch:DI 4 "=bX"))]
+ "TARGET_PCREL_OPT"
+{
+ output_pcrel_opt_reloc (operands[3]);
+ return "lbz %0,%1";
+}
+ [(set_attr "type" "load")])
+
+;; Scalar types that can be optimized by loading them into floating point
+;; or Altivec registers.
+(define_mode_iterator PCRELOPT_FP [DI DF SF])
+
+;; Load instructions to load up scalar floating point or 64-bit integer values
+;; into floating point registers or Altivec registers.
+(define_mode_attr PCRELOPT_FPR_LD [(DI "lfd") (DF "lfd") (SF "lfs")])
+(define_mode_attr PCRELOPT_VMX_LD [(DI "lxsd") (DF "lxsd") (SF "lxssp")])
+
+;; PCREL_OPT load operation of scalar DF/DI/SF into vector registers.
+(define_insn "*pcrel_opt_ld<mode>_vsx"
+ [(set (match_operand:PCRELOPT_FP 0 "vsx_register_operand" "+d,v")
+ (unspec:PCRELOPT_FP [(match_operand:PCRELOPT_FP 1 "d_form_memory" "m,m")
+ (match_operand:DI 2 "vsx_register_operand" "0,0")
+ (match_operand 3 "const_int_operand" "n,n")]
+ UNSPEC_PCREL_OPT_LD_RELOC))
+ (clobber (match_operand:DI 4 "base_reg_operand" "=b,b"))]
+ "TARGET_PCREL_OPT"
+{
+ output_pcrel_opt_reloc (operands[3]);
+ return which_alternative ? "<PCRELOPT_VMX_LD> %0,%1"
+ : "<PCRELOPT_FPR_LD> %0,%1";
+}
+ [(set_attr "type" "fpload")])
+
+;; PCREL_OPT optimization extending SFmode to DFmode via a load.
+(define_insn "*pcrel_opt_ldsf_df"
+ [(set (match_operand:DF 0 "vsx_register_operand" "+d,v")
+ (float_extend:DF
+ (unspec:SF [(match_operand:SF 1 "d_form_memory" "m,m")
+ (match_operand:DI 2 "vsx_register_operand" "0,0")
+ (match_operand 3 "const_int_operand" "n,n")]
+ UNSPEC_PCREL_OPT_LD_RELOC)))
+ (clobber (match_operand:DI 4 "base_reg_operand" "=b,b"))]
+ "TARGET_PCREL_OPT"
+{
+ output_pcrel_opt_reloc (operands[3]);
+ return which_alternative ? "lxssp %0,%1" : "lfs %0,%1";
+}
+ [(set_attr "type" "fpload")])
+
+;; PCREL_OPT load operation of vector/float128 types into vector registers.
+(define_insn "*pcrel_opt_ld<mode>"
+ [(set (match_operand:PCRELOPT_VECT 0 "vsx_register_operand" "+wa")
+ (unspec:PCRELOPT_VECT [(match_operand:PCRELOPT_VECT 1 "d_form_memory" "m")
+ (match_operand:DI 2 "vsx_register_operand" "0")
+ (match_operand 3 "const_int_operand" "n")]
+ UNSPEC_PCREL_OPT_LD_RELOC))
+ (clobber (match_operand:DI 4 "base_reg_operand" "=b"))]
+ "TARGET_PCREL_OPT"
+{
+ output_pcrel_opt_reloc (operands[3]);
+ return "lxv %x0,%1";
+}
+ [(set_attr "type" "vecload")])
+
+\f
+;; PCREL_OPT optimization for stores. We need to put the label after the PLD
+;; instruction, because the assembler might insert a NOP before the PLD for
+;; alignment.
+;;
+;; If we are optimizing a single write, normally the code would look like:
+;;
+;; (set (reg:DI <ptr>)
+;; (symbol_ref:DI "<extern_addr>")) # <data> must be live here
+;;
+;; ... # insns do not need to be adjacent
+;;
+;; (set (mem:SI (reg:DI <xxx>))
+;; (reg:SI <data>)) # <ptr> dies with this insn
+;;
+;; We optimize this to be:
+;;
+;; (parallel [(set (reg:DI <ptr>)
+;; (unspec:DI [(symbol_ref:DI "<extern_addr>")
+;; (const_int <marker>)]
+;; UNSPEC_PCREL_OPT_ST_ADDR))
+;; (use (reg:<MODE> <data>))])
+;;
+;; ... # insns do not need to be adjacent
+;;
+;; (parallel [(set (mem:<MODE> (reg:DI <ptr>))
+;; (unspec:<MODE> [(reg:<MODE> <data>)
+;; (const_int <marker>)]
+;; UNSPEC_PCREL_OPT_ST_RELOC))
+;; (clobber (reg:DI <ptr>))])
+
+(define_insn "*pcrel_opt_st_addr<mode>"
+ [(set (match_operand:DI 0 "gpc_reg_operand" "=b")
+ (unspec:DI [(match_operand:DI 1 "pcrel_external_address")
+ (match_operand 2 "const_int_operand" "n")]
+ UNSPEC_PCREL_OPT_ST_ADDR))
+ (use (match_operand:PCRELOPT 3 "gpc_reg_operand" "rwa"))]
+ "TARGET_PCREL_OPT"
+ "ld %0,%a1\n.Lpcrel%2:"
+ [(set_attr "prefixed" "yes")
+ (set_attr "type" "load")
+ (set_attr "loads_external_address" "yes")])
+
+;; PCREL_OPT stores.
+(define_insn "*pcrel_opt_st<mode>"
+ [(set (match_operand:QHSI 0 "d_form_memory" "=m")
+ (unspec:QHSI [(match_operand:QHSI 1 "gpc_reg_operand" "r")
+ (match_operand 2 "const_int_operand" "n")]
+ UNSPEC_PCREL_OPT_ST_RELOC))
+ (clobber (match_operand:DI 3 "base_reg_operand" "=b"))]
+ "TARGET_PCREL_OPT"
+{
+ output_pcrel_opt_reloc (operands[2]);
+ return "st<wd> %1,%0";
+}
+ [(set_attr "type" "store")])
+
+(define_insn "*pcrel_opt_stdi"
+ [(set (match_operand:DI 0 "d_form_memory" "=m,m,m")
+ (unspec:DI [(match_operand:DI 1 "gpc_reg_operand" "r,d,v")
+ (match_operand 2 "const_int_operand" "n,n,n")]
+ UNSPEC_PCREL_OPT_ST_RELOC))
+ (clobber (match_operand:DI 3 "base_reg_operand" "=b,b,b"))]
+ "TARGET_PCREL_OPT && TARGET_POWERPC64"
+{
+ output_pcrel_opt_reloc (operands[2]);
+ switch (which_alternative)
+ {
+ case 0:
+ return "std %1,%0";
+ case 1:
+ return "stfd %1,%0";
+ case 2:
+ return "stxsd %1,%0";
+ default:
+ gcc_unreachable ();
+ }
+}
+ [(set_attr "type" "store,fpstore,fpstore")])
+
+(define_insn "*pcrel_opt_stsf"
+ [(set (match_operand:SF 0 "d_form_memory" "=m,m,m")
+ (unspec:SF [(match_operand:SF 1 "gpc_reg_operand" "d,v,r")
+ (match_operand 2 "const_int_operand" "n,n,n")]
+ UNSPEC_PCREL_OPT_ST_RELOC))
+ (clobber (match_operand:DI 3 "base_reg_operand" "=b,b,b"))]
+ "TARGET_PCREL_OPT"
+{
+ output_pcrel_opt_reloc (operands[2]);
+ switch (which_alternative)
+ {
+ case 0:
+ return "stfs %1,%0";
+ case 1:
+ return "stxssp %1,%0";
+ case 2:
+ return "stw %1,%0";
+ default:
+ gcc_unreachable ();
+ }
+}
+ [(set_attr "type" "fpstore,fpstore,store")])
+
+(define_insn "*pcrel_opt_stdf"
+ [(set (match_operand:DF 0 "d_form_memory" "=m,m,m")
+ (unspec:DF [(match_operand:DF 1 "gpc_reg_operand" "d,v,r")
+ (match_operand 2 "const_int_operand" "n,n,n")]
+ UNSPEC_PCREL_OPT_ST_RELOC))
+ (clobber (match_operand:DI 3 "base_reg_operand" "=b,b,b"))]
+ "TARGET_PCREL_OPT
+ && (TARGET_POWERPC64 || vsx_register_operand (operands[1], DFmode))"
+{
+ output_pcrel_opt_reloc (operands[2]);
+ switch (which_alternative)
+ {
+ case 0:
+ return "stfd %1,%0";
+ case 1:
+ return "stxsd %1,%0";
+ case 2:
+ return "std %1,%0";
+ default:
+ gcc_unreachable ();
+ }
+}
+ [(set_attr "type" "fpstore,fpstore,store")])
+
+(define_insn "*pcrel_opt_st<mode>"
+ [(set (match_operand:PCRELOPT_VECT 0 "d_form_memory" "=m")
+ (unspec:PCRELOPT_VECT [(match_operand:PCRELOPT_VECT 1 "gpc_reg_operand" "wa")
+ (match_operand 2 "const_int_operand" "n")]
+ UNSPEC_PCREL_OPT_ST_RELOC))
+ (clobber (match_operand:DI 3 "base_reg_operand" "=b"))]
+ "TARGET_PCREL_OPT"
+{
+ output_pcrel_opt_reloc (operands[2]);
+ return "stxv %x1,%0";
+}
+ [(set_attr "type" "vecstore")])
{
return address_is_prefixed (XEXP (op, 0), mode, NON_PREFIXED_DEFAULT);
})
+
+;; Return true if the operand is a valid memory operand with a D-form
+;; address that could be merged with the load of a PC-relative external address
+;; with the PCREL_OPT optimization. We don't check here whether or not the
+;; offset needs to be used in a DS-FORM (bottom 2 bits 0) or DQ-FORM (bottom 4
+;; bits 0) instruction.
+(define_predicate "d_form_memory"
+ (match_code "mem")
+{
+ if (!memory_operand (op, mode))
+ return false;
+
+ rtx addr = XEXP (op, 0);
+
+ if (REG_P (addr))
+ return true;
+ if (SUBREG_P (addr) && REG_P (SUBREG_REG (addr)))
+ return true;
+
+ return !indexed_address (addr, mode);
+})
/* Flags that need to be turned off if -mno-power10. */
#define OTHER_POWER10_MASKS (OPTION_MASK_MMA \
| OPTION_MASK_PCREL \
+ | OPTION_MASK_PCREL_OPT \
| OPTION_MASK_PREFIXED)
#define ISA_3_1_MASKS_SERVER (ISA_3_0_MASKS_SERVER \
| OPTION_MASK_P9_MISC \
| OPTION_MASK_P9_VECTOR \
| OPTION_MASK_PCREL \
+ | OPTION_MASK_PCREL_OPT \
| OPTION_MASK_POPCNTB \
| OPTION_MASK_POPCNTD \
| OPTION_MASK_POWERPC64 \
REPLACE_PASS (PASS, INSTANCE, TGT_PASS)
*/
+ /* Pass to add the appropriate vector swaps on power8 little endian systems.
+ The power8 does not have instructions that automaticaly do the byte swaps
+ for loads and stores. */
INSERT_PASS_BEFORE (pass_cse, 1, pass_analyze_swaps);
+
+ /* Pass to do the PCREL_OPT optimization that combines the load of an
+ external symbol's address along with a single load or store using that
+ address as a base register. */
+ INSERT_PASS_BEFORE (pass_sched2, 1, pass_pcrel_opt);
--- /dev/null
+/* Subroutines used support the pc-relative linker optimization.
+ Copyright (C) 2020-2021 Free Software Foundation, Inc.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published
+ by the Free Software Foundation; either version 3, or (at your
+ option) any later version.
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING3. If not see
+ <http://www.gnu.org/licenses/>. */
+
+/* This file implements a RTL pass that looks for pc-relative loads of the
+ address of an external variable using the PCREL_GOT relocation and a single
+ load that uses that external address. If that is found we create the
+ PCREL_OPT relocation to possibly convert:
+
+ pld addr_reg,var@pcrel@got
+
+ <possibly other insns that do not use 'addr_reg' or 'data_reg'>
+
+ lwz data_reg,0(addr_reg)
+
+ into:
+
+ plwz data_reg,var@pcrel
+
+ <possibly other insns that do not use 'addr_reg' or 'data_reg'>
+
+ nop
+
+ Of course it would be nice to be able to put the plwz in this example in
+ place of the lwz but the linker cannot easily replace a 4-byte instruction
+ with an 8-byte one.
+
+ If the variable is not defined in the main program or the code using it is
+ not in the main program, the linker puts the address in the .got section and
+ generates:
+
+ .section .got
+ .Lvar_got:
+ .dword var
+
+ At the point where it is referenced, we have:
+
+ .section .text
+ pld addr_reg,.Lvar_got@pcrel
+
+ <possibly other insns that do not use 'addr_reg' or 'data_reg'>
+
+ lwz data_reg,0(addr_reg)
+
+ We look for a single usage in the basic block where this external
+ address is loaded, and convert it to a PCREL_OPT relocation so the
+ linker can convert it to a single plwz in this case. Multiple uses
+ or references in another basic block will force us to not use the
+ PCREL_OPT relocation.
+
+ We also optimize stores to the address of an external variable using the
+ PCREL_GOT relocation and a single store that uses that external address. If
+ that is found we create the PCREL_OPT relocation to possibly convert:
+
+ pld addr_reg,var@pcrel@got
+
+ <possibly other insns that do not use 'addr_reg' or 'data_reg'>
+
+ stw data_reg,0(addr_reg)
+
+ into:
+
+ pstw data_reg,var@pcrel
+
+ <possibly other insns that do not use 'addr_reg' or 'data_reg'>
+
+ nop
+
+ If the variable is not defined in the main program or the code using it is
+ not in the main program, the linker puts the address in the .got section and
+ generates:
+
+ .section .got
+ .Lvar_got:
+ .dword var
+
+ And at our point of reference we have:
+
+ .section .text
+ pld addr_reg,.Lvar_got@pcrel
+
+ <possibly other insns that do not use 'addr_reg' or 'data_reg'>
+
+ stw data_reg,0(addr_reg)
+
+ We only look for a single usage in the basic block where the external
+ address is loaded. Multiple uses or references in another basic block will
+ force us to not use the PCREL_OPT relocation. */
+
+#define IN_TARGET_CODE 1
+
+#include "config.h"
+#include "system.h"
+#include "coretypes.h"
+#include "backend.h"
+#include "rtl.h"
+#include "tree.h"
+#include "memmodel.h"
+#include "expmed.h"
+#include "optabs.h"
+#include "recog.h"
+#include "df.h"
+#include "tm_p.h"
+#include "ira.h"
+#include "print-tree.h"
+#include "varasm.h"
+#include "explow.h"
+#include "expr.h"
+#include "output.h"
+#include "tree-pass.h"
+#include "rtx-vector-builder.h"
+#include "print-rtl.h"
+#include "insn-attr.h"
+#include "insn-codes.h"
+
+/* Various counters. */
+static struct {
+ unsigned long extern_addrs;
+ unsigned long loads;
+ unsigned long adjacent_loads;
+ unsigned long failed_loads;
+ unsigned long stores;
+ unsigned long adjacent_stores;
+ unsigned long failed_stores;
+} counters;
+
+/* Unique integer that is appended to .Lpcrel to make a pcrel_opt label. */
+static unsigned int pcrel_opt_next_num;
+
+\f
+/* Optimize a PC-relative load address to be used in a load. Before it calls
+ this function, pcrel_opt_address () uses DF to make sure that it is safe
+ to do the PCREL_OPT optimization on these insns.
+
+ Convert insns of the form:
+
+ (set (reg:DI addr)
+ (symbol_ref:DI "ext_symbol"))
+
+ ...
+
+ (set (reg:<MODE> value)
+ (mem:<MODE> (reg:DI addr)))
+
+ into:
+
+ (parallel [(set (reg:DI addr)
+ (unspec:<MODE> [(symbol_ref:DI "ext_symbol")
+ (const_int label_num)]
+ UNSPEC_PCREL_OPT_LD_ADDR))
+ (set (reg:DI data)
+ (unspec:DI [(const_int 0)]
+ UNSPEC_PCREL_OPT_LD_DATA))])
+
+ ...
+
+ (parallel [(set (reg:<MODE>)
+ (unspec:<MODE> [(mem:<MODE> (reg:DI addr))
+ (reg:DI data)
+ (const_int label_num)]
+ UNSPEC_PCREL_OPT_LD_RELOC))
+ (clobber (reg:DI addr))])
+
+ Because PCREL_OPT will move the actual location of the load from the second
+ insn to the first, we need to have the register for the load data be live
+ starting at the first insn.
+
+ If the destination register for the data being loaded is the same register
+ used to hold the extern address, we generate this insn instead:
+
+ (set (reg:DI data)
+ (unspec:DI [(symbol_ref:DI "ext_symbol")
+ (const_int label_num)]
+ UNSPEC_PCREL_OPT_LD_SAME_REG))
+
+ In the first insn, we set both the address of the external variable, and mark
+ that the variable being loaded both are created in that insn, and are
+ consumed in the second insn. The mode used in the first insn for the data
+ register that will be loaded in the second insn doesn't matter in the end so
+ we use DImode. We just need to mark that both registers may be set in the
+ first insn, and will be used in the second insn.
+
+ The UNSPEC_PCREL_OPT_LD_ADDR insn will generate the load address plus
+ a definition of a label (.Lpcrel<n>), while the UNSPEC_PCREL_OPT_LD_RELOC
+ insn will generate the .reloc to tell the linker to tie the load address and
+ load using that address together.
+
+ pld b,ext_symbol@got@pcrel
+ .Lpcrel1:
+
+ ...
+
+ .reloc .Lpcrel1-8,R_PPC64_PCREL_OPT,.-(.Lpcrel1-8)
+ lwz r,0(b)
+
+ If ext_symbol is defined in another object file in the main program and we
+ are linking the main program, the linker will convert the above instructions
+ to:
+
+ plwz r,ext_symbol@got@pcrel
+
+ ...
+
+ nop
+
+ ADDR_INSN is the insn that is loading the address.
+ LOAD_INSN is the insn that uses the address to load the actual data. */
+
+static void
+pcrel_opt_load (rtx_insn *addr_insn, rtx_insn *load_insn)
+{
+ rtx addr_set = PATTERN (addr_insn);
+ gcc_assert (GET_CODE (addr_set) == SET);
+
+ rtx addr_reg = SET_DEST (addr_set);
+ gcc_assert (base_reg_operand (addr_reg, Pmode));
+
+ rtx addr_symbol = SET_SRC (addr_set);
+ gcc_assert (pcrel_external_address (addr_symbol, Pmode));
+
+ rtx load_set = PATTERN (load_insn);
+ gcc_assert (GET_CODE (load_set) == SET);
+
+ /* Make sure there are no references to the register being loaded
+ between the two insns. */
+ rtx reg = SET_DEST (load_set);
+ if (reg_used_between_p (reg, addr_insn, load_insn)
+ || reg_set_between_p (reg, addr_insn, load_insn))
+ return;
+
+ rtx mem = SET_SRC (load_set);
+ machine_mode reg_mode = GET_MODE (reg);
+ machine_mode mem_mode = GET_MODE (mem);
+ rtx mem_inner = mem;
+ unsigned int reg_regno = reg_or_subregno (reg);
+
+ /* Handle the fact that LWA is a DS format instruction, but LWZ is a D format
+ instruction. If the mem load is a signed SImode (i.e. LWA would be used)
+ we set mem_mode to DImode so that pcrel_opt_valid_mem_p() will check that
+ the address will work for a DS-form instruction. If it won't work, we skip
+ the optimization. The float loads are all indexed so there are no problems
+ there. */
+
+ if (GET_CODE (mem) == SIGN_EXTEND && GET_MODE (XEXP (mem, 0)) == SImode)
+ {
+ if (!INT_REGNO_P (reg_regno))
+ return;
+
+ mem_inner = XEXP (mem, 0);
+ mem_mode = DImode;
+ }
+
+ else if (GET_CODE (mem) == SIGN_EXTEND
+ || GET_CODE (mem) == ZERO_EXTEND
+ || GET_CODE (mem) == FLOAT_EXTEND)
+ {
+ mem_inner = XEXP (mem, 0);
+ mem_mode = GET_MODE (mem_inner);
+ }
+
+ if (!MEM_P (mem_inner))
+ return;
+
+ /* Can we do PCREL_OPT for this reference? */
+ if (!pcrel_opt_valid_mem_p (reg, mem_mode, mem_inner))
+ return;
+
+ /* Allocate a new PC-relative label, and update the load external address
+ insn.
+
+ If the register being loaded is different from the address register, we
+ need to indicate both registers are set at the load of the address.
+
+ (parallel [(set (reg load)
+ (unspec [(symbol_ref addr_symbol)
+ (const_int label_num)]
+ UNSPEC_PCREL_OPT_LD_ADDR))
+ (set (reg addr)
+ (unspec [(const_int 0)]
+ UNSPEC_PCREL_OPT_LD_DATA))])
+
+ If the register being loaded is the same as the address register, we use
+ an alternate form:
+
+ (set (reg load)
+ (unspec [(symbol_ref addr_symbol)
+ (const_int label_num)]
+ UNSPEC_PCREL_OPT_LD_SAME_REG)) */
+ unsigned int addr_regno = reg_or_subregno (addr_reg);
+ rtx label_num = GEN_INT (++pcrel_opt_next_num);
+ rtx reg_di = gen_rtx_REG (DImode, reg_regno);
+ rtx addr_pattern;
+
+ /* Create the load address, either using the pattern with an explicit clobber
+ if the address register is not the same as the register being loaded, or
+ using the pattern that requires the address register to be the address
+ loaded. */
+ if (addr_regno != reg_regno)
+ addr_pattern = gen_pcrel_opt_ld_addr (addr_reg, addr_symbol, label_num,
+ reg_di);
+ else
+ addr_pattern = gen_pcrel_opt_ld_addr_same_reg (addr_reg, addr_symbol,
+ label_num);
+
+ validate_change (addr_insn, &PATTERN (addr_insn), addr_pattern, false);
+
+ /* Update the load insn. If the mem had a sign/zero/float extend, add that
+ also after doing the UNSPEC. Add an explicit clobber of the external
+ address register just to make it clear that the address register dies.
+
+ (parallel [(set (reg:<MODE> data)
+ (unspec:<MODE> [(mem (addr_reg)
+ (reg:DI data)
+ (const_int label_num)]
+ UNSPEC_PCREL_OPT_LD_RELOC))
+ (clobber (reg:DI addr_reg))]) */
+ rtvec v_load = gen_rtvec (3, mem_inner, reg_di, label_num);
+ rtx new_load = gen_rtx_UNSPEC (GET_MODE (mem_inner), v_load,
+ UNSPEC_PCREL_OPT_LD_RELOC);
+
+ if (GET_CODE (mem) != GET_CODE (mem_inner))
+ new_load = gen_rtx_fmt_e (GET_CODE (mem), reg_mode, new_load);
+
+ rtx new_load_set = gen_rtx_SET (reg, new_load);
+ rtx load_clobber = gen_rtx_CLOBBER (VOIDmode,
+ (addr_regno == reg_regno
+ ? gen_rtx_SCRATCH (Pmode)
+ : addr_reg));
+ rtx new_load_pattern
+ = gen_rtx_PARALLEL (VOIDmode, gen_rtvec (2, new_load_set, load_clobber));
+
+ validate_change (load_insn, &PATTERN (load_insn), new_load_pattern, false);
+
+ /* Attempt to apply the changes: */
+ if (!apply_change_group ())
+ {
+ /* PCREL_OPT load optimization did not succeed. */
+ counters.failed_loads++;
+ if (dump_file)
+ fprintf (dump_file,
+ "PCREL_OPT load failed (addr insn = %d, use insn = %d).\n",
+ INSN_UID (addr_insn),
+ INSN_UID (load_insn));
+ return;
+ }
+
+ /* PCREL_OPT load optimization succeeded. */
+ counters.loads++;
+ if (next_nonnote_insn (addr_insn) == load_insn)
+ counters.adjacent_loads++;
+
+ if (dump_file)
+ fprintf (dump_file,
+ "PCREL_OPT load (addr insn = %d, use insn = %d).\n",
+ INSN_UID (addr_insn),
+ INSN_UID (load_insn));
+
+ /* Because we have set DF_DEFER_INSN_RESCAN, we have to explicitly do it
+ after we have made changes to the insns. */
+ df_analyze ();
+
+}
+\f
+/* Optimize a PC-relative load address to be used in a store. Before calling
+ this function, pcrel_opt_address () uses DF to make sure it is safe to do
+ the PCREL_OPT optimization.
+
+ Convert insns of the form:
+
+ (set (reg:DI addr)
+ (symbol_ref:DI "ext_symbol"))
+
+ ...
+
+ (set (mem:<MODE> (reg:DI addr))
+ (reg:<MODE> value))
+
+ into:
+
+ (parallel [(set (reg:DI addr)
+ (unspec:DI [(symbol_ref:DI "ext_symbol")
+ (const_int label_num)]
+ UNSPEC_PCREL_OPT_ST_ADDR))
+ (use (reg:<MODE> value))])
+
+ ...
+
+ (parallel [(set (mem:<MODE> (reg:DI addr))
+ (unspec:<MODE> [(reg:<MODE>)
+ (const_int label_num)]
+ UNSPEC_PCREL_OPT_ST_RELOC))
+ (clobber (reg:DI addr))])
+
+ The UNSPEC_PCREL_OPT_ST_ADDR insn will generate the load address plus a
+ definition of a label (.Lpcrel<n>), while the UNSPEC_PCREL_OPT_ST_RELOC insn
+ will generate the .reloc to tell the linker to tie the load address and load
+ using that address together.
+
+ pld b,ext_symbol@got@pcrel
+ .Lpcrel1:
+
+ ...
+
+ .reloc .Lpcrel1-8,R_PPC64_PCREL_OPT,.-(.Lpcrel1-8)
+ stw r,0(b)
+
+ If ext_symbol is defined in another object file in the main program and we
+ are linking the main program, the linker will convert the above instructions
+ to:
+
+ pstwz r,ext_symbol@got@pcrel
+
+ ...
+
+ nop */
+
+static void
+pcrel_opt_store (rtx_insn *addr_insn, /* insn loading address. */
+ rtx_insn *store_insn) /* insn using address. */
+{
+ rtx addr_old_set = PATTERN (addr_insn);
+ gcc_assert (GET_CODE (addr_old_set) == SET);
+
+ rtx addr_reg = SET_DEST (addr_old_set);
+ gcc_assert (base_reg_operand (addr_reg, Pmode));
+
+ rtx addr_symbol = SET_SRC (addr_old_set);
+ gcc_assert (pcrel_external_address (addr_symbol, Pmode));
+
+ rtx store_set = PATTERN (store_insn);
+ gcc_assert (GET_CODE (store_set) == SET);
+
+ rtx mem = SET_DEST (store_set);
+ if (!MEM_P (mem))
+ return;
+
+ machine_mode mem_mode = GET_MODE (mem);
+ rtx reg = SET_SRC (store_set);
+
+ /* Don't allow storing the address of the external variable. */
+ if (reg_or_subregno (reg) == reg_or_subregno (addr_reg))
+ return;
+
+ /* Can we do PCREL_OPT for this reference? */
+ if (!pcrel_opt_valid_mem_p (reg, mem_mode, mem))
+ return;
+
+ /* Allocate a new PC-relative label, and update the load address insn.
+
+ (parallel [(set (reg addr)
+ (unspec [(symbol_ref symbol)
+ (const_int label_num)]
+ UNSPEC_PCREL_OPT_ST_ADDR))
+ (use (reg store))])
+ */
+ rtx label_num = GEN_INT (++pcrel_opt_next_num);
+ rtvec v_addr = gen_rtvec (2, addr_symbol, label_num);
+ rtx addr_unspec = gen_rtx_UNSPEC (Pmode, v_addr,
+ UNSPEC_PCREL_OPT_ST_ADDR);
+ rtx addr_new_set = gen_rtx_SET (addr_reg, addr_unspec);
+ rtx addr_use = gen_rtx_USE (VOIDmode, reg);
+ rtx addr_new_pattern
+ = gen_rtx_PARALLEL (VOIDmode, gen_rtvec (2, addr_new_set, addr_use));
+
+ validate_change (addr_insn, &PATTERN (addr_insn), addr_new_pattern, false);
+
+ /* Update the store insn. Add an explicit clobber of the external address
+ register just to be sure there are no additional uses of the address
+ register.
+
+ (parallel [(set (mem (addr_reg)
+ (unspec:<MODE> [(reg)
+ (const_int label_num)]
+ UNSPEC_PCREL_OPT_ST_RELOC))
+ (clobber (reg:DI addr_reg))]) */
+ rtvec v_store = gen_rtvec (2, reg, label_num);
+ rtx new_store = gen_rtx_UNSPEC (mem_mode, v_store,
+ UNSPEC_PCREL_OPT_ST_RELOC);
+
+ rtx new_store_set = gen_rtx_SET (mem, new_store);
+ rtx store_clobber = gen_rtx_CLOBBER (VOIDmode, addr_reg);
+ rtx new_store_pattern
+ = gen_rtx_PARALLEL (VOIDmode, gen_rtvec (2, new_store_set, store_clobber));
+
+ validate_change (store_insn, &PATTERN (store_insn), new_store_pattern, false);
+
+ /* Attempt to apply the changes: */
+ if (!apply_change_group ())
+ {
+ /* PCREL_OPT store failed. */
+ counters.failed_stores++;
+ if (dump_file)
+ fprintf (dump_file,
+ "PCREL_OPT store failed (addr insn = %d, use insn = %d).\n",
+ INSN_UID (addr_insn),
+ INSN_UID (store_insn));
+ return;
+ }
+
+ /* PCREL_OPT store succeeded. */
+ counters.stores++;
+ if (next_nonnote_insn (addr_insn) == store_insn)
+ counters.adjacent_stores++;
+
+ if (dump_file)
+ fprintf (dump_file,
+ "PCREL_OPT store (addr insn = %d, use insn = %d).\n",
+ INSN_UID (addr_insn),
+ INSN_UID (store_insn));
+
+ /* Because we have set DF_DEFER_INSN_RESCAN, we have to explicitly do it
+ after we have made changes to the insns. */
+ df_analyze();
+
+}
+
+/* Return the register used as the base register of MEM, if the instruction has
+ a pc-relative form. We look for BSWAP to rule out LFIWAX/LFIWZX/STFIWX, and
+ ROTATE/VEC_SELECT are RTX_EXTRA not RTX_UNARY which rules out lxvd2x. This
+ excludes instructions that do not have a pc-relative form. */
+
+static rtx
+get_mem_base_reg (rtx mem)
+{
+ const char * fmt;
+
+ while (!MEM_P (mem))
+ {
+ if (GET_RTX_CLASS (GET_CODE (mem)) != RTX_UNARY
+ || GET_CODE (mem) == BSWAP)
+ return NULL_RTX;
+ fmt = GET_RTX_FORMAT (GET_CODE (mem));
+ if (fmt[0] != 'e')
+ return NULL_RTX;
+ mem = XEXP (mem, 0);
+ if (mem == NULL_RTX )
+ return NULL_RTX;
+ }
+
+ if (!MEM_SIZE_KNOWN_P (mem))
+ return NULL_RTX;
+
+ rtx addr_rtx = (XEXP (mem, 0));
+ if (GET_CODE (addr_rtx) == PRE_MODIFY)
+ addr_rtx = XEXP (addr_rtx, 1);
+
+ while (GET_CODE (addr_rtx) == PLUS
+ && CONST_INT_P (XEXP (addr_rtx, 1)))
+ addr_rtx = XEXP (addr_rtx, 0);
+
+ if (!REG_P (addr_rtx))
+ return NULL_RTX;
+
+ return addr_rtx;
+}
+
+/* Check whether INSN contains a reference to REGNO that will inhibit the
+ PCREL_OPT optimization. If TYPE is a load or store instruction, return true
+ if there is a definition of REGNO. If TYPE is a load instruction, then
+ return true of there is a use of REGNO. */
+
+static bool
+insn_references_regno_p (rtx_insn *insn, unsigned int regno,
+ enum attr_type type)
+{
+ struct df_insn_info *insn_info = DF_INSN_INFO_GET (insn);
+ df_ref ref;
+
+ /* Return true if there is a definition of REGNO. */
+ for (ref = DF_INSN_INFO_DEFS (insn_info); ref; ref = DF_REF_NEXT_LOC (ref))
+ if (DF_REF_REGNO (ref) == regno)
+ return true;
+
+ /* If type is a load, return true if there is a use of REGNO. */
+ if (type == TYPE_LOAD
+ || type == TYPE_FPLOAD
+ || type == TYPE_VECLOAD)
+ for (ref = DF_INSN_INFO_USES (insn_info); ref; ref = DF_REF_NEXT_LOC (ref))
+ if (DF_REF_REGNO (ref) == regno)
+ return true;
+
+ return false;
+}
+
+/* Given an insn that loads up a base register with the address of an
+ external symbol, see if we can optimize it with the PCREL_OPT
+ optimization.
+
+ DF is used to make sure that there is exactly one definition and one
+ non-debug use of the address register defined by the insn. The use insn must
+ be a non-prefix insn, and must also be in the same basic block as the address
+ insn.
+
+ ADDR_INSN is the insn that loads the external symbol address. */
+
+static void
+pcrel_opt_address (rtx_insn *addr_insn)
+{
+ counters.extern_addrs++;
+
+ /* Do some basic validation. */
+ rtx addr_set = PATTERN (addr_insn);
+ if (GET_CODE (addr_set) != SET)
+ return;
+
+ rtx addr_reg = SET_DEST (addr_set);
+ rtx addr_symbol = SET_SRC (addr_set);
+
+ if (!base_reg_operand (addr_reg, Pmode)
+ || !pcrel_external_address (addr_symbol, Pmode))
+ return;
+
+ /* The address register must have exactly one definition. */
+ struct df_insn_info *insn_info = DF_INSN_INFO_GET (addr_insn);
+ if (!insn_info)
+ return;
+
+ df_ref def = df_single_def (insn_info);
+ if (!def)
+ return;
+
+ /* Make sure there is at least one use. */
+ df_link *chain = DF_REF_CHAIN (def);
+ if (!chain || !chain->ref)
+ return;
+
+ /* Get the insn of the possible load or store. */
+ rtx_insn *use_insn = DF_REF_INSN (chain->ref);
+
+ /* Ensure there are no other uses. */
+ for (chain = chain->next; chain; chain = chain->next)
+ if (chain->ref && DF_REF_INSN_INFO (chain->ref))
+ {
+ gcc_assert (DF_REF_INSN (chain->ref));
+ if (NONDEBUG_INSN_P (DF_REF_INSN (chain->ref)))
+ return;
+ }
+
+ /* The use instruction must be a single non-prefixed instruction. */
+ if (get_attr_length (use_insn) != 4)
+ return;
+
+ /* The address and the memory operation must be in the same basic block. */
+ if (BLOCK_FOR_INSN (use_insn) != BLOCK_FOR_INSN (addr_insn))
+ return;
+
+ /* If this isn't a simple SET, skip doing the optimization. */
+ if (GET_CODE (PATTERN (use_insn)) != SET)
+ return;
+
+ enum attr_type use_insn_type = get_attr_type (use_insn);
+ unsigned int use_regno;
+
+ /* Make sure the use_insn is using addr_reg as its base register
+ for the load or store, and determine the regno for the register
+ used in the use_insn. */
+ rtx use_dest, use_src;
+ switch (use_insn_type)
+ {
+ case TYPE_LOAD:
+ case TYPE_FPLOAD:
+ case TYPE_VECLOAD:
+ /* Make sure our address register is the same register used in the
+ base address of the load. */
+ if (addr_reg != get_mem_base_reg (SET_SRC (PATTERN (use_insn))))
+ return;
+ /* Make sure we are setting a register before we look at REGNO. */
+ use_dest = SET_DEST (PATTERN (use_insn));
+ if (!register_operand (use_dest, GET_MODE (use_dest)))
+ return;
+ use_regno = REGNO (use_dest);
+ break;
+ case TYPE_STORE:
+ case TYPE_FPSTORE:
+ case TYPE_VECSTORE:
+ /* Make sure our address register is the same register used in the
+ base address of the store. */
+ if (addr_reg != get_mem_base_reg (SET_DEST (PATTERN (use_insn))))
+ return;
+ /* Make sure this is a register before we look at REGNO. */
+ use_src = SET_SRC (PATTERN (use_insn));
+ if (!register_operand (use_src, GET_MODE (use_src)))
+ return;
+ use_regno = REGNO (use_src);
+ break;
+ default:
+ /* We can only optimize loads and stores. Ignore everything else. */
+ return;
+ }
+
+ rtx_insn *insn;
+ for (insn = NEXT_INSN (addr_insn);
+ insn != use_insn;
+ insn = NEXT_INSN (insn))
+ {
+ /* If we see a call, do not do the PCREL_OPT optimization. */
+ if (CALL_P (insn))
+ return;
+
+ /* Skip debug insns. */
+ if (!NONDEBUG_INSN_P (insn))
+ continue;
+
+ /* See if it is a load or store. */
+ if (GET_CODE (PATTERN (insn)) != USE
+ && GET_CODE (PATTERN (insn)) != CLOBBER)
+ {
+ switch (get_attr_type (insn))
+ {
+ case TYPE_LOAD:
+ /* While load of the external address is a 'load' for scheduling
+ purposes, it should be safe to allow loading other external
+ addresses between the load of the external address we are
+ currently looking at and the load or store using that
+ address. */
+ if (get_attr_loads_external_address (insn)
+ == LOADS_EXTERNAL_ADDRESS_YES)
+ break;
+ /* fall through */
+
+ case TYPE_FPLOAD:
+ case TYPE_VECLOAD:
+ /* Don't do the PCREL_OPT store optimization if there is a load
+ operation. For example, the load might be trying to load the
+ value being stored in between getting the address and doing
+ the store. */
+ if (use_insn_type == TYPE_STORE
+ || use_insn_type == TYPE_FPSTORE
+ || use_insn_type == TYPE_VECSTORE)
+ return;
+ break;
+
+ case TYPE_STORE:
+ case TYPE_FPSTORE:
+ case TYPE_VECSTORE:
+ /* Don't do the PCREL_OPT load optimization if there is a store
+ operation. Perhaps the store might be to the global variable
+ through a pointer. */
+ return;
+
+ case TYPE_LOAD_L:
+ case TYPE_STORE_C:
+ case TYPE_HTM:
+ case TYPE_HTMSIMPLE:
+ /* Don't do the optimization through atomic operations. */
+ return;
+
+ default:
+ break;
+ }
+ }
+
+ /* Check for invalid references of the non-address register that is
+ used in the load or store instruction. */
+ if (insn_references_regno_p (insn, use_regno, use_insn_type))
+ return;
+ }
+
+ /* Is this a load or a store? */
+ switch (use_insn_type)
+ {
+ case TYPE_LOAD:
+ case TYPE_FPLOAD:
+ case TYPE_VECLOAD:
+ pcrel_opt_load (addr_insn, use_insn);
+ break;
+
+ case TYPE_STORE:
+ case TYPE_FPSTORE:
+ case TYPE_VECSTORE:
+ pcrel_opt_store (addr_insn, use_insn);
+ break;
+
+ default:
+ gcc_unreachable ();
+ }
+}
+
+/* Optimize pcrel external variable references. */
+
+static unsigned int
+pcrel_opt_pass (function *fun)
+{
+ basic_block bb;
+ rtx_insn *insn, *curr_insn = 0;
+
+ memset (&counters, 0, sizeof (counters));
+
+ /* Dataflow analysis for use-def chains. However we have to specify both UD
+ and DU as otherwise when we make changes to insns for the PCREL_OPT there
+ will be dangling references. */
+ df_set_flags (DF_RD_PRUNE_DEAD_DEFS);
+ df_chain_add_problem (DF_DU_CHAIN + DF_UD_CHAIN);
+ df_note_add_problem ();
+ df_analyze ();
+
+ /* Set the defer flag as our pattern of operation will be to modify two insns,
+ then call df_analyze (). */
+ df_set_flags (DF_DEFER_INSN_RESCAN | DF_LR_RUN_DCE);
+
+ if (dump_file)
+ fprintf (dump_file, "\n");
+
+ /* Look at each basic block to see if there is a load of an external
+ variable's external address, and a single load/store using that external
+ address. */
+ FOR_ALL_BB_FN (bb, fun)
+ {
+ FOR_BB_INSNS_SAFE (bb, insn, curr_insn)
+ {
+ if (NONJUMP_INSN_P (insn)
+ && single_set (insn)
+ && get_attr_loads_external_address (insn)
+ == LOADS_EXTERNAL_ADDRESS_YES)
+ pcrel_opt_address (insn);
+ }
+ }
+
+ if (dump_file)
+ {
+ fprintf (dump_file,
+ "\n# of loads of an address of an external symbol = %lu\n",
+ counters.extern_addrs);
+
+ fprintf (dump_file, "# of PCREL_OPT loads = %lu (adjacent %lu)\n",
+ counters.loads, counters.adjacent_loads);
+
+ if (counters.failed_loads)
+ fprintf (dump_file, "# of failed PCREL_OPT loads = %lu\n",
+ counters.failed_loads);
+
+ fprintf (dump_file, "# of PCREL_OPT stores = %lu (adjacent %lu)\n",
+ counters.stores, counters.adjacent_stores);
+
+ if (counters.failed_stores)
+ fprintf (dump_file, "# of failed PCREL_OPT stores = %lu\n",
+ counters.failed_stores);
+
+ fprintf (dump_file, "\n");
+ }
+
+ df_remove_problem (df_chain);
+ df_process_deferred_rescans ();
+ df_set_flags (DF_RD_PRUNE_DEAD_DEFS | DF_LR_RUN_DCE);
+ df_analyze ();
+ return 0;
+}
+\f
+/* Optimize pc-relative references for the new PCREL_OPT pass. */
+const pass_data pass_data_pcrel_opt =
+{
+ RTL_PASS, /* type. */
+ "pcrel_opt", /* name. */
+ OPTGROUP_NONE, /* optinfo_flags. */
+ TV_NONE, /* tv_id. */
+ 0, /* properties_required. */
+ 0, /* properties_provided. */
+ 0, /* properties_destroyed. */
+ 0, /* todo_flags_start. */
+ TODO_df_finish, /* todo_flags_finish. */
+};
+
+/* Pass data structures. */
+class pcrel_opt : public rtl_opt_pass
+{
+public:
+ pcrel_opt (gcc::context *ctxt)
+ : rtl_opt_pass (pass_data_pcrel_opt, ctxt)
+ {}
+
+ ~pcrel_opt (void)
+ {}
+
+ /* opt_pass methods: */
+ virtual bool gate (function *)
+ {
+ return (TARGET_PCREL && TARGET_PCREL_OPT && optimize);
+ }
+
+ virtual unsigned int execute (function *fun)
+ {
+ return pcrel_opt_pass (fun);
+ }
+
+ opt_pass *clone ()
+ {
+ return new pcrel_opt (m_ctxt);
+ }
+};
+
+rtl_opt_pass *
+make_pass_pcrel_opt (gcc::context *ctxt)
+{
+ return new pcrel_opt (ctxt);
+}
enum non_prefixed_form);
extern bool address_is_non_pfx_d_or_x (rtx addr, machine_mode mode,
enum non_prefixed_form non_prefix_format);
+extern bool pcrel_opt_valid_mem_p (rtx, machine_mode, rtx);
+enum non_prefixed_form reg_to_non_prefixed (rtx reg, machine_mode mode);
extern bool prefixed_load_p (rtx_insn *);
extern bool prefixed_store_p (rtx_insn *);
extern bool prefixed_paddi_p (rtx_insn *);
extern void rs6000_asm_output_opcode (FILE *);
+extern void output_pcrel_opt_reloc (rtx);
extern void rs6000_final_prescan_insn (rtx_insn *, rtx [], int);
extern int rs6000_adjust_insn_length (rtx_insn *, int);
class rtl_opt_pass;
extern rtl_opt_pass *make_pass_analyze_swaps (gcc::context *);
+extern rtl_opt_pass *make_pass_pcrel_opt (gcc::context *);
extern bool rs6000_sum_of_two_registers_p (const_rtx expr);
extern bool rs6000_quadword_masked_address_p (const_rtx exp);
extern rtx rs6000_gen_lvx (enum machine_mode, rtx, rtx);
machine_mode,
secondary_reload_info *,
bool);
-static enum non_prefixed_form reg_to_non_prefixed (rtx reg, machine_mode mode);
rtl_opt_pass *make_pass_analyze_swaps (gcc::context*);
/* Hash table stuff for keeping track of TOC entries. */
rs6000_isa_flags &= ~OPTION_MASK_MMA;
}
+ if (!TARGET_PCREL && TARGET_PCREL_OPT)
+ rs6000_isa_flags &= ~OPTION_MASK_PCREL_OPT;
+
if (TARGET_DEBUG_REG || TARGET_DEBUG_TARGET)
rs6000_print_isa_options (stderr, 0, "after subtarget", rs6000_isa_flags);
{
rtx x, y, offset;
- if (GET_CODE (orig_x) == UNSPEC && XINT (orig_x, 1) == UNSPEC_FUSION_GPR)
- orig_x = XVECEXP (orig_x, 0, 0);
+ /* UNSPEC_FUSION_GPR is created by the peephole2 for power8 fusion. It
+ encodes loading up the high part of the address of a TOC reference along
+ with a load of a GPR using the same base register used for the load. We
+ return the original SYMBOL_REF.
+
+ (set (reg:INT1 <reg>
+ (unspec:INT1 [<combined-address>] UNSPEC_FUSION_GPR)))
+
+ UNSPEC_PCREL_OPT_LD_ADDR is used by the power10 PCREL_OPT pass. These
+ UNSPECs include the external SYMBOL_REF along with the value being loaded.
+ We return the original SYMBOL_REF.
+
+ (parallel [(set (reg:DI <base-reg>)
+ (unspec:DI [(symbol_ref <symbol>)
+ (const_int <marker>)]
+ UNSPEC_PCREL_OPT_LD_ADDR))
+ (set (reg:DI <load-reg>)
+ (unspec:DI [(const_int 0)]
+ UNSPEC_PCREL_OPT_LD_DATA))])
+
+ UNSPEC_PCREL_OPT_LD_SAME_REG is an alternative that is used if the
+ GPR being loaded is the same as the GPR used to hold the external address.
+
+ (set (reg:DI <base-reg>)
+ (unspec:DI [(symbol_ref <symbol>)
+ (const_int <marker>)]
+ UNSPEC_PCREL_OPT_LD_SAME_REG))
+
+ UNSPEC_PCREL_OPT_ST_ADDR is used by the power10 PCREL_OPT pass. This
+ UNSPEC include the external SYMBOL_REF along with the value being loaded.
+ We return the original SYMBOL_REF.
+
+ (parallel [(set (reg:DI <base-reg>)
+ (unspec:DI [(symbol_ref <symbol>)
+ (const_int <marker>)]
+ UNSPEC_PCREL_OPT_ST_ADDR))
+ (use (reg <store-reg>))]) */
+
+ if (GET_CODE (orig_x) == UNSPEC)
+ switch (XINT (orig_x, 1))
+ {
+ case UNSPEC_FUSION_GPR:
+ case UNSPEC_PCREL_OPT_LD_ADDR:
+ case UNSPEC_PCREL_OPT_LD_SAME_REG:
+ case UNSPEC_PCREL_OPT_ST_ADDR:
+ orig_x = XVECEXP (orig_x, 0, 0);
+ break;
+
+ default:
+ break;
+ }
orig_x = delegitimize_mem_from_attrs (orig_x);
{ "mulhw", OPTION_MASK_MULHW, false, true },
{ "multiple", OPTION_MASK_MULTIPLE, false, true },
{ "pcrel", OPTION_MASK_PCREL, false, true },
+ { "pcrel-opt", OPTION_MASK_PCREL_OPT, false, true },
{ "popcntb", OPTION_MASK_POPCNTB, false, true },
{ "popcntd", OPTION_MASK_POPCNTD, false, true },
{ "power8-fusion", OPTION_MASK_P8_FUSION, false, true },
return false;
}
+/* Return true if an REG with a given MODE is loaded from or stored into a MEM
+ location uses a non-prefixed D/DS/DQ-form address. This is used to validate
+ the load or store with the PCREL_OPT optimization to make sure it is an
+ instruction that can be optimized.
+
+ We need to specify the MODE separately from the REG to allow for loads that
+ include zero/sign/float extension. */
+
+bool
+pcrel_opt_valid_mem_p (rtx reg, machine_mode mode, rtx mem)
+{
+ /* If the instruction is indexed only like LFIWAX/LXSIWAX we cannot do the
+ PCREL_OPT optimization. */
+ enum non_prefixed_form non_prefixed = reg_to_non_prefixed (reg, mode);
+ if (non_prefixed == NON_PREFIXED_X)
+ return false;
+
+ /* Check if this is a non-prefixed D/DS/DQ-form instruction. */
+ rtx addr = XEXP (mem, 0);
+ enum insn_form iform = address_to_insn_form (addr, mode, non_prefixed);
+ return (iform == INSN_FORM_BASE_REG
+ || iform == INSN_FORM_D
+ || iform == INSN_FORM_DS
+ || iform == INSN_FORM_DQ);
+}
+
/* Helper function to see if we're potentially looking at lfs/stfs.
- PARALLEL containing a SET and a CLOBBER
- stfs:
/* Helper function to take a REG and a MODE and turn it into the non-prefixed
instruction format (D/DS/DQ) used for offset memory. */
-static enum non_prefixed_form
+enum non_prefixed_form
reg_to_non_prefixed (rtx reg, machine_mode mode)
{
/* If it isn't a register, use the defaults. */
rs6000_asm_output_opcode (FILE *stream)
{
if (prepend_p_to_next_insn)
- fprintf (stream, "p");
+ {
+ fprintf (stream, "p");
+
+ /* Reset the flag in the case where there are separate insn lines in the
+ sequence, so the 'p' is only emitted for the first line. This shows up
+ when we are doing the PCREL_OPT optimization, in that the label created
+ with %r<n> would have a leading 'p' printed. */
+ prepend_p_to_next_insn = false;
+ }
return;
}
+/* Emit the relocation to tie the next instruction to a previous instruction
+ that loads up an external address. This is used to do the PCREL_OPT
+ optimization. Note, the label is generated after the PLD of the got
+ pc-relative address to allow for the assembler to insert NOPs before the PLD
+ instruction. The operand is a constant integer that is the label
+ number. */
+
+void
+output_pcrel_opt_reloc (rtx label_num)
+{
+ rtx operands[1] = { label_num };
+ output_asm_insn (".reloc .Lpcrel%0-8,R_PPC64_PCREL_OPT,.-(.Lpcrel%0-8)",
+ operands);
+}
+
/* Adjust the length of an INSN. LENGTH is the currently-computed length and
should be adjusted to reflect any required changes. This macro is used when
there is some systematic length adjustment required that would be difficult
(const_string "no")))
+;; Whether an insn loads an external address for the PCREL_OPT optimizaton.
+(define_attr "loads_external_address" "no,yes"
+ (const_string "no"))
+
;; Return the number of real hardware instructions in a combined insn. If it
;; is 0, just use the length / 4.
(define_attr "num_insns" "" (const_int 0))
"TARGET_PCREL"
"ld %0,%a1"
[(set_attr "prefixed" "yes")
- (set_attr "type" "load")])
+ (set_attr "type" "load")
+ (set_attr "loads_external_address" "yes")])
;; TOC register handling.
(include "crypto.md")
(include "htm.md")
(include "fusion.md")
+(include "pcrel-opt.md")
Target Mask(PCREL) Var(rs6000_isa_flags)
Generate (do not generate) pc-relative memory addressing.
+mpcrel-opt
+Target Undocumented Mask(PCREL_OPT) Var(rs6000_isa_flags)
+Generate (do not generate) pc-relative memory optimizations for externals.
+
mmma
Target Mask(MMA) Var(rs6000_isa_flags)
Generate (do not generate) MMA instructions.
TM_H += $(srcdir)/config/rs6000/rs6000-modes.h
PASSES_EXTRA += $(srcdir)/config/rs6000/rs6000-passes.def
+rs6000-pcrel-opt.o: $(srcdir)/config/rs6000/rs6000-pcrel-opt.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
+
rs6000-c.o: $(srcdir)/config/rs6000/rs6000-c.c
$(COMPILE) $<
$(POSTCOMPILE)
$(srcdir)/config/rs6000/crypto.md \
$(srcdir)/config/rs6000/htm.md \
$(srcdir)/config/rs6000/dfp.md \
- $(srcdir)/config/rs6000/fusion.md
+ $(srcdir)/config/rs6000/fusion.md \
+ $(srcdir)/config/rs6000/pcrel-opt.md
--- /dev/null
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_pcrel } */
+/* { dg-options "-O2 -mdejagnu-cpu=power10" } */
+
+#define TYPE unsigned int
+
+/* Test whether using an external variable twice (doing an increment) prevents
+ the PCREL_OPT optimization. */
+extern TYPE ext;
+
+void
+inc (void)
+{
+ ext++; /* No PCREL_OPT (uses address twice). */
+}
+
+/* { dg-final { scan-assembler-not "R_PPC64_PCREL_OPT" } } */
--- /dev/null
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_pcrel } */
+/* { dg-options "-O2 -mdejagnu-cpu=power10" } */
+
+#define TYPE double
+#define LARGE 0x20000
+
+/* Test whether we get the right number of PCREL_OPT optimizations for
+ double. */
+extern TYPE ext[];
+
+TYPE
+get (void)
+{
+ return ext[0]; /* PCREL_OPT relocation. */
+}
+
+TYPE
+get2 (void)
+{
+ return ext[2]; /* PCREL_OPT relocation. */
+}
+
+TYPE
+get_large (void)
+{
+ return ext[LARGE]; /* No PCREL_OPT (load is prefixed). */
+}
+
+TYPE
+get_variable (unsigned long n)
+{
+ return ext[n]; /* No PCREL_OPT (load is indexed). */
+}
+
+/* { dg-final { scan-assembler-times "R_PPC64_PCREL_OPT" 2 } } */
--- /dev/null
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_pcrel } */
+/* { dg-options "-O2 -mdejagnu-cpu=power10" } */
+
+#define TYPE long long
+#define LARGE 0x20000
+
+/* Test whether we get the right number of PCREL_OPT optimizations for long
+ long. */
+extern TYPE ext[];
+
+TYPE
+get (void)
+{
+ return ext[0]; /* PCREL_OPT relocation. */
+}
+
+TYPE
+get2 (void)
+{
+ return ext[2]; /* PCREL_OPT relocation. */
+}
+
+TYPE
+get_large (void)
+{
+ return ext[LARGE]; /* No PCREL_OPT (load is prefixed). */
+}
+
+TYPE
+get_variable (unsigned long n)
+{
+ return ext[n]; /* No PCREL_OPT (load is indexed). */
+}
+
+double
+get_double (void)
+{
+ return (double) ext[0]; /* PCREL_OPT relocation. */
+}
+
+/* { dg-final { scan-assembler-times "R_PPC64_PCREL_OPT" 3 } } */
--- /dev/null
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_pcrel } */
+/* { dg-options "-O2 -mdejagnu-cpu=power10" } */
+
+#define TYPE unsigned short
+#define LARGE 0x20000
+
+/* Test whether we get the right number of PCREL_OPT optimizations for unsigned
+ short. */
+extern TYPE ext[];
+
+TYPE
+get (void)
+{
+ return ext[0]; /* PCREL_OPT relocation. */
+}
+
+TYPE
+get2 (void)
+{
+ return ext[2]; /* PCREL_OPT relocation. */
+}
+
+TYPE
+get_large (void)
+{
+ return ext[LARGE]; /* No PCREL_OPT (load is prefixed). */
+}
+
+TYPE
+get_variable (unsigned long n)
+{
+ return ext[n]; /* No PCREL_OPT (load is indexed). */
+}
+
+double
+get_double (void)
+{
+ return (double) ext[0]; /* No PCREL_OPT (LXSIHZX is indexed). */
+}
+
+/* { dg-final { scan-assembler-times "R_PPC64_PCREL_OPT" 2 } } */
--- /dev/null
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_pcrel } */
+/* { dg-options "-O2 -mdejagnu-cpu=power10" } */
+
+#define TYPE unsigned char
+#define LARGE 0x20000
+
+/* Test whether we get the right number of PCREL_OPT optimizations for unsigned
+ char. */
+extern TYPE ext[];
+
+TYPE
+get (void)
+{
+ return ext[0]; /* PCREL_OPT relocation. */
+}
+
+TYPE
+get2 (void)
+{
+ return ext[2]; /* PCREL_OPT relocation. */
+}
+
+TYPE
+get_large (void)
+{
+ return ext[LARGE]; /* No PCREL_OPT (load is prefixed). */
+}
+
+TYPE
+get_variable (unsigned long n)
+{
+ return ext[n]; /* No PCREL_OPT (load is indexed). */
+}
+
+double
+get_double (void)
+{
+ return (double) ext[0]; /* No PCREL_OPT (LXSIBZX is indexed). */
+}
+
+/* { dg-final { scan-assembler-times "R_PPC64_PCREL_OPT" 2 } } */
--- /dev/null
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_pcrel } */
+/* { dg-options "-O2 -mdejagnu-cpu=power10" } */
+
+#define TYPE float
+#define LARGE 0x20000
+
+/* Test whether we get the right number of PCREL_OPT optimizations for
+ float. */
+extern TYPE ext[];
+
+TYPE
+get (void)
+{
+ return ext[0]; /* PCREL_OPT relocation. */
+}
+
+TYPE
+get2 (void)
+{
+ return ext[2]; /* PCREL_OPT relocation. */
+}
+
+TYPE
+get_large (void)
+{
+ return ext[LARGE]; /* No PCREL_OPT (load is prefixed). */
+}
+
+TYPE
+get_variable (unsigned long n)
+{
+ return ext[n]; /* No PCREL_OPT (load is indexed). */
+}
+
+double
+get_double (void)
+{
+ return (double) ext[0]; /* PCREL_OPT relocation. */
+}
+
+/* { dg-final { scan-assembler-times "R_PPC64_PCREL_OPT" 3 } } */
--- /dev/null
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_pcrel } */
+/* { dg-options "-O2 -mdejagnu-cpu=power10" } */
+
+#define TYPE int
+#define LARGE 0x20000
+
+/* Test whether we get the right number of PCREL_OPT optimizations for int. */
+extern TYPE ext[];
+
+TYPE
+get (void)
+{
+ return ext[0]; /* PCREL_OPT relocation. */
+}
+
+TYPE
+get2 (void)
+{
+ return ext[2]; /* PCREL_OPT relocation. */
+}
+
+TYPE
+get_large (void)
+{
+ return ext[LARGE]; /* No PCREL_OPT (load is prefixed). */
+}
+
+TYPE
+get_variable (unsigned long n)
+{
+ return ext[n]; /* No PCREL_OPT (load is indexed). */
+}
+
+double
+get_double (void)
+{
+ return (double) ext[0]; /* No PCREL_OPT (LFIWAX is indexed). */
+}
+
+/* { dg-final { scan-assembler-times "R_PPC64_PCREL_OPT" 2 } } */
--- /dev/null
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_pcrel } */
+/* { dg-options "-O2 -mdejagnu-cpu=power10" } */
+
+#define TYPE vector double
+#define LARGE 0x20000
+
+/* Test whether we get the right number of PCREL_OPT optimizations for
+ vector double. */
+extern TYPE ext[];
+
+TYPE
+get (void)
+{
+ return ext[0]; /* PCREL_OPT relocation. */
+}
+
+TYPE
+get2 (void)
+{
+ return ext[2]; /* PCREL_OPT relocation. */
+}
+
+TYPE
+get_large (void)
+{
+ return ext[LARGE]; /* No PCREL_OPT (load is prefixed). */
+}
+
+TYPE
+get_variable (unsigned long n)
+{
+ return ext[n]; /* No PCREL_OPT (load is indexed). */
+}
+
+/* { dg-final { scan-assembler-times "R_PPC64_PCREL_OPT" 2 } } */
--- /dev/null
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_pcrel } */
+/* { dg-options "-O2 -mdejagnu-cpu=power10" } */
+
+#define TYPE double
+#define LARGE 0x20000
+
+/* Test whether we get the right number of PCREL_OPT optimizations for
+ double. */
+extern TYPE ext[];
+
+void
+store (TYPE a)
+{
+ ext[0] = a; /* PCREL_OPT relocation. */
+}
+
+void
+store2 (TYPE a)
+{
+ ext[2] = a; /* PCREL_OPT relocation. */
+}
+
+void
+store_large (TYPE a)
+{
+ ext[LARGE] = a; /* No PCREL_OPT (store is prefixed). */
+}
+
+void
+store_variable (TYPE a, unsigned long n)
+{
+ ext[n] = a; /* No PCREL_OPT (store is indexed). */
+}
+
+/* { dg-final { scan-assembler-times "R_PPC64_PCREL_OPT" 2 } } */
--- /dev/null
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_pcrel } */
+/* { dg-options "-O2 -mdejagnu-cpu=power10" } */
+
+#define TYPE long long
+#define LARGE 0x20000
+
+/* Test whether we get the right number of PCREL_OPT optimizations for long
+ long. */
+extern TYPE ext[];
+
+void
+store (TYPE a)
+{
+ ext[0] = a; /* PCREL_OPT relocation. */
+}
+
+void
+store2 (TYPE a)
+{
+ ext[2] = a; /* PCREL_OPT relocation. */
+}
+
+void
+store_large (TYPE a)
+{
+ ext[LARGE] = a; /* No PCREL_OPT (store is prefixed). */
+}
+
+void
+store_variable (TYPE a, unsigned long n)
+{
+ ext[n] = a; /* No PCREL_OPT (store is indexed). */
+}
+
+/* { dg-final { scan-assembler-times "R_PPC64_PCREL_OPT" 2 } } */
--- /dev/null
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_pcrel } */
+/* { dg-options "-O2 -mdejagnu-cpu=power10" } */
+
+#define TYPE unsigned short
+#define LARGE 0x20000
+
+/* Test whether we get the right number of PCREL_OPT optimizations for unsigned
+ short. */
+extern TYPE ext[];
+
+void
+store (TYPE a)
+{
+ ext[0] = a; /* PCREL_OPT relocation. */
+}
+
+void
+store2 (TYPE a)
+{
+ ext[2] = a; /* PCREL_OPT relocation. */
+}
+
+void
+store_large (TYPE a)
+{
+ ext[LARGE] = a; /* No PCREL_OPT (store is prefixed). */
+}
+
+void
+store_variable (TYPE a, unsigned long n)
+{
+ ext[n] = a; /* No PCREL_OPT (store is indexed). */
+}
+
+void
+store_double (double a)
+{
+ ext[0] = (TYPE) a; /* No PCREL_OPT (STXIHZX is indexed). */
+}
+
+/* { dg-final { scan-assembler-times "R_PPC64_PCREL_OPT" 2 } } */
--- /dev/null
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_pcrel } */
+/* { dg-options "-O2 -mdejagnu-cpu=power10" } */
+
+#define TYPE unsigned char
+#define LARGE 0x20000
+
+/* Test whether we get the right number of PCREL_OPT optimizations for unsigned
+ char. */
+extern TYPE ext[];
+
+void
+store (TYPE a)
+{
+ ext[0] = a; /* PCREL_OPT relocation. */
+}
+
+void
+store2 (TYPE a)
+{
+ ext[2] = a; /* PCREL_OPT relocation. */
+}
+
+void
+store_large (TYPE a)
+{
+ ext[LARGE] = a; /* No PCREL_OPT (store is prefixed). */
+}
+
+void
+store_variable (TYPE a, unsigned long n)
+{
+ ext[n] = a; /* No PCREL_OPT (store is indexed). */
+}
+
+void
+store_double (double a)
+{
+ ext[0] = (TYPE) a; /* No PCREL_OPT (STXIBZX is indexed). */
+}
+
+/* { dg-final { scan-assembler-times "R_PPC64_PCREL_OPT" 2 } } */
--- /dev/null
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_pcrel } */
+/* { dg-options "-O2 -mdejagnu-cpu=power10" } */
+
+#define TYPE float
+#define LARGE 0x20000
+
+/* Test whether we get the right number of PCREL_OPT optimizations for
+ float. */
+extern TYPE ext[];
+
+void
+store (TYPE a)
+{
+ ext[0] = a; /* PCREL_OPT relocation. */
+}
+
+void
+store2 (TYPE a)
+{
+ ext[2] = a; /* PCREL_OPT relocation. */
+}
+
+void
+store_large (TYPE a)
+{
+ ext[LARGE] = a; /* No PCREL_OPT (store is prefixed). */
+}
+
+void
+store_variable (TYPE a, unsigned long n)
+{
+ ext[n] = a; /* No PCREL_OPT (store is indexed). */
+}
+
+/* { dg-final { scan-assembler-times "R_PPC64_PCREL_OPT" 2 } } */
--- /dev/null
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_pcrel } */
+/* { dg-options "-O2 -mdejagnu-cpu=power10" } */
+
+#define TYPE int
+#define LARGE 0x20000
+
+/* Test whether we get the right number of PCREL_OPT optimizations for int. */
+extern TYPE ext[];
+
+void
+store (TYPE a)
+{
+ ext[0] = a; /* PCREL_OPT relocation. */
+}
+
+void
+store2 (TYPE a)
+{
+ ext[2] = a; /* PCREL_OPT relocation. */
+}
+
+void
+store_large (TYPE a)
+{
+ ext[LARGE] = a; /* No PCREL_OPT (store is prefixed). */
+}
+
+void
+store_variable (TYPE a, unsigned long n)
+{
+ ext[n] = a; /* No PCREL_OPT (store is indexed). */
+}
+
+void
+store_double (double a)
+{
+ ext[0] = (TYPE) a; /* No PCREL_OPT (STFIWX is indexed). */
+}
+
+/* { dg-final { scan-assembler-times "R_PPC64_PCREL_OPT" 2 } } */
--- /dev/null
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_pcrel } */
+/* { dg-options "-O2 -mdejagnu-cpu=power10" } */
+
+#define TYPE vector double
+#define LARGE 0x20000
+
+/* Test whether we get the right number of PCREL_OPT optimizations for
+ vector double. */
+extern TYPE ext[];
+
+void
+store (TYPE a)
+{
+ ext[0] = a; /* PCREL_OPT relocation. */
+}
+
+void
+store2 (TYPE a)
+{
+ ext[2] = a; /* PCREL_OPT relocation. */
+}
+
+void
+store_large (TYPE a)
+{
+ ext[LARGE] = a; /* No PCREL_OPT (store is prefixed). */
+}
+
+void
+store_variable (TYPE a, unsigned long n)
+{
+ ext[n] = a; /* No PCREL_OPT (store is indexed). */
+}
+
+/* { dg-final { scan-assembler-times "R_PPC64_PCREL_OPT" 2 } } */