#else
#include <varargs.h>
#endif
-
+#include <ctype.h>
#include <fcntl.h>
#include "symfile.h"
#include "remote-utils.h"
+#include "gdb_string.h"
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
extern struct target_ops remote_rdp_ops;
static serial_t io;
static host_callback *callback = &default_callback;
struct
-{
- int step_info;
- int break_info;
- int model_info;
- int target_info;
- int can_step;
- char command_line[10];
- int rdi_level;
- int rdi_stopped_status;
-} ds;
+ {
+ int step_info;
+ int break_info;
+ int model_info;
+ int target_info;
+ int can_step;
+ char command_line[10];
+ int rdi_level;
+ int rdi_stopped_status;
+ }
+ds;
#define RDP_FPU_READWRITE_MASK_FPS (1<<8)
#define RDP_SET_BREAK 0xa
-#define RDP_SET_BREAK_TYPE_PC_EQUAL 0
-#define RDP_SET_BREAK_TYPE_GET_HANDLE (0x10)
+#define RDP_SET_BREAK_TYPE_PC_EQUAL 0
+#define RDP_SET_BREAK_TYPE_GET_HANDLE (0x10)
#define RDP_CLEAR_BREAK 0xb
static int
remote_rdp_xfer_inferior_memory PARAMS ((CORE_ADDR memaddr,
- char *myaddr,
- int len,
- int write,
- struct target_ops * target));
+ char *myaddr,
+ int len,
+ int write,
+ struct target_ops * target));
/* Stuff for talking to the serial layer. */
int c = SERIAL_READCHAR (io, timeout);
if (remote_debug)
- printf ("[%02x]", c);
+ printf ("[%02x]\n", c);
if (c == SERIAL_TIMEOUT)
{
char val;
{
if (remote_debug)
- printf("(%02x)", val);
+ printf ("(%02x)\n", val);
SERIAL_WRITE (io, &val, 1);
}
static void
put_word (val)
- long val;
+ int val;
{
/* We always send in little endian */
unsigned char b[4];
b[3] = val >> 24;
if (remote_debug)
- printf("(%04x)", val);
+ printf ("(%04x)", val);
SERIAL_WRITE (io, b, 4);
}
/* Stuff for talking to the RDP layer. */
-/* This is a bit more fancy that need be so that it syncs even in nasty cases. */
+/* This is a bit more fancy that need be so that it syncs even in nasty cases.
+
+ I'be been unable to make it reliably sync up with the change
+ baudrate open command. It likes to sit and say it's been reset,
+ with no more action. So I took all that code out. I'd rather sync
+ reliably at 9600 than wait forever for a possible 19200 connection.
+ */
static void
-rdp_init (int cold)
+rdp_init (cold, tty)
+ int cold;
+ int tty;
{
- int oloop;
int sync = 0;
int type = cold ? RDP_OPEN_TYPE_COLD : RDP_OPEN_TYPE_WARM;
- int try;
- int rcount = 0;
- int bi;
+ int baudtry = 9600;
- for (try = 0; !sync && try < 10 ; try++)
+ time_t now = time (0);
+ time_t stop_time = now + 10; /* Try and sync for 10 seconds, then give up */
+
+
+ while (time (0) < stop_time && !sync)
{
int restype;
QUIT;
- SERIAL_FLUSH_INPUT (io);
- put_byte (RDP_OPEN);
- if (baud_rate == 19200)
- {
- put_byte (type | RDP_OPEN_TYPE_RETURN_SEX | RDP_OPEN_TYPE_BAUDRATE);
- put_word (0);
- put_word (RDP_OPEN_BAUDRATE_19200);
- }
- else
- {
- put_byte (type | RDP_OPEN_TYPE_RETURN_SEX);
- put_word (0);
- }
+ SERIAL_FLUSH_INPUT (io);
+ SERIAL_FLUSH_OUTPUT (io);
- restype = SERIAL_READCHAR (io, 1);
+ if (tty)
+ printf_unfiltered ("Trying to connect at %d baud.\n", baudtry);
+ put_byte (RDP_OPEN);
- if (remote_debug)
- printf_unfiltered ("[%02x]\n", restype);
+ put_byte (type | RDP_OPEN_TYPE_RETURN_SEX);
+ put_word (0);
- if (restype == RDP_RESET)
+ while (!sync && (restype = SERIAL_READCHAR (io, 1)) > 0)
{
- put_byte (RDP_RESET);
- while ((restype = SERIAL_READCHAR (io, 1)) == RDP_RESET)
- ;
- while ((restype = SERIAL_READCHAR (io, 1)) > 0)
+ if (remote_debug)
+ printf_unfiltered ("[%02x]\n", restype);
+
+ switch (restype)
{
- printf_unfiltered ("%c", isgraph(restype) ? restype : ' ');
- }
- while ((restype = SERIAL_READCHAR (io, 1)) > 0)
- ;
- printf_unfiltered("\n");
- error("board reset, try again.\n");
- continue;
- }
-
- switch (restype)
- {
- case SERIAL_TIMEOUT:
- break;
- case RDP_RESET:
- /* Ignore a load of these */
- break;
- default:
- break;
- case RDP_RES_VALUE:
- {
- int resval = SERIAL_READCHAR (io, 1);
- switch (resval)
+ case SERIAL_TIMEOUT:
+ break;
+ case RDP_RESET:
+ while ((restype = SERIAL_READCHAR (io, 1)) == RDP_RESET)
+ ;
+ while ((restype = SERIAL_READCHAR (io, 1)) > 0)
+ {
+ printf_unfiltered ("%c", isgraph (restype) ? restype : ' ');
+ }
+ while ((restype = SERIAL_READCHAR (io, 1)) > 0)
+ ;
+ if (tty)
+ {
+ printf_unfiltered ("\nThe board has sent notification that it was reset.\n");
+ printf_unfiltered ("Waiting for it to settle down...\n");
+ }
+ sleep (3);
+ if (tty)
+ printf_unfiltered ("\nTrying again.\n");
+ break;
+ default:
+ break;
+ case RDP_RES_VALUE:
{
- case SERIAL_TIMEOUT:
- break;
- case RDP_RES_VALUE_LITTLE_ENDIAN:
- target_byte_order = LITTLE_ENDIAN;
- sync =1 ;
- break;
- case RDP_RES_VALUE_BIG_ENDIAN:
- target_byte_order = BIG_ENDIAN;
- sync =1 ;
- break;
- default:
- break;
+ int resval = SERIAL_READCHAR (io, 1);
+ switch (resval)
+ {
+ case SERIAL_TIMEOUT:
+ break;
+ case RDP_RES_VALUE_LITTLE_ENDIAN:
+ target_byte_order = LITTLE_ENDIAN;
+ sync = 1;
+ break;
+ case RDP_RES_VALUE_BIG_ENDIAN:
+ target_byte_order = BIG_ENDIAN;
+ sync = 1;
+ break;
+ default:
+ break;
+ }
}
- }
+ }
}
}
- if (sync)
- {
- SERIAL_FLUSH_INPUT (io);
- SERIAL_SETBAUDRATE (io, baud_rate);
- SERIAL_FLUSH_INPUT (io);
- }
- else
+ if (!sync)
{
error ("Couldn't reset the board, try pressing the reset button");
}
{
/* There are 12 bytes long
!! fixme about endianness
- */
+ */
int dummy; /* I've seen these come back as four words !! */
send_rdp ("bbw-SWWWWZ", RDP_COPRO_READ, FPU_COPRO_NUMBER, mask, buf + 0, buf + 4, buf + 8, &dummy);
}
}
#endif
}
-
\f
+
/* Convert between GDB requests and the RDP layer. */
static void
}
-static void
+static void
handle_swi ()
{
argsin args[3];
res = SERIAL_READCHAR (io, 1);
while (res == SERIAL_TIMEOUT)
{
- QUIT ;
+ QUIT;
printf_filtered ("Waiting for target..\n");
res = SERIAL_READCHAR (io, 1);
}
if (!args)
error_no_arg ("serial port device name");
- if (baud_rate != 19200)
- baud_rate = 9600;
-
+ baud_rate = 9600;
+
target_preopen (from_tty);
io = SERIAL_OPEN (args);
SERIAL_RAW (io);
- rdp_init (0);
+ rdp_init (1, from_tty);
if (from_tty)
io = 0;
}
-/* Terminate the open connection to the remote debugger. */
-
-static void
-remote_rdp_detach (args, from_tty)
- char *args;
- int from_tty;
-{
- pop_target ();
-}
/* Resume execution of the target process. STEP says whether to single-step
or to run free; SIGGNAL is the signal value (e.g. SIGINT) to be given
{"watchpoints for half-word writes supported", RDP_INFO_ABOUT_BREAK_HALFWORD_WRITE},
{"watchpoints for word writes supported", RDP_INFO_ABOUT_BREAK_WORD_WRITE},
{"mask break/watch-points supported", RDP_INFO_ABOUT_BREAK_MASK},
- {"thread-specific breakpoints supported", RDP_INFO_ABOUT_BREAK_THREAD_BREAK},
- {"thread-specific watchpoints supported", RDP_INFO_ABOUT_BREAK_THREAD_WATCH},
+{"thread-specific breakpoints supported", RDP_INFO_ABOUT_BREAK_THREAD_BREAK},
+{"thread-specific watchpoints supported", RDP_INFO_ABOUT_BREAK_THREAD_WATCH},
{"conditional breakpoints supported", RDP_INFO_ABOUT_BREAK_COND},
{0}
};
{
"rdp", /* to_shortname */
/* to_longname */
- "Remote Target using the RDProtocol",
+ "Remote Target using the RDProtocol",
/* to_doc */
"Use a remote ARM system which uses the ARM Remote Debugging Protocol",
remote_rdp_open, /* to_open */
remote_rdp_fetch_register, /* to_fetch_registers */
remote_rdp_store_register, /* to_store_registers */
remote_rdp_prepare_to_store, /* to_prepare_to_store */
- remote_rdp_xfer_inferior_memory, /* to_xfer_memory */
+ remote_rdp_xfer_inferior_memory, /* to_xfer_memory */
remote_rdp_files_info, /* to_files_info */
remote_rdp_insert_breakpoint, /* to_insert_breakpoint */
remote_rdp_remove_breakpoint, /* to_remove_breakpoint */
projects / external / binutils.git / commitdiff