ARM: dts: imx7d-sdb: Adjust the regulator nodes

It is not recommended to place the regulator nodes inside 'simple-bus',
so adjust them accordingly.

The motivation for rearranging this is to make it easier to add new
regulator nodes in the future.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 4a4b522..291f556 100644 (file)
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -73,47 +73,37 @@
                };
        };
 
-       regulators {
-               compatible = "simple-bus";
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               reg_usb_otg1_vbus: regulator@0 {
-                       compatible = "regulator-fixed";
-                       reg = <0>;
-                       regulator-name = "usb_otg1_vbus";
-                       regulator-min-microvolt = <5000000>;
-                       regulator-max-microvolt = <5000000>;
-                       gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-                       enable-active-high;
-               };
+       reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+               compatible = "regulator-fixed";
+               regulator-name = "usb_otg1_vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
 
-               reg_usb_otg2_vbus: regulator@1 {
-                       compatible = "regulator-fixed";
-                       reg = <1>;
-                       regulator-name = "usb_otg2_vbus";
-                       regulator-min-microvolt = <5000000>;
-                       regulator-max-microvolt = <5000000>;
-                       gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
-                       enable-active-high;
-               };
+       reg_usb_otg2_vbus: regulator-usb-otg1-vbus {
+               compatible = "regulator-fixed";
+               regulator-name = "usb_otg2_vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
 
-               reg_can2_3v3: regulator@2 {
-                       compatible = "regulator-fixed";
-                       reg = <2>;
-                       regulator-name = "can2-3v3";
-                       regulator-min-microvolt = <3300000>;
-                       regulator-max-microvolt = <3300000>;
-                       gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
-               };
+       reg_can2_3v3: regulator-can2-3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "can2-3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+       };
 
-               reg_vref_1v8: regulator@3 {
-                       compatible = "regulator-fixed";
-                       reg = <3>;
-                       regulator-name = "vref-1v8";
-                       regulator-min-microvolt = <1800000>;
-                       regulator-max-microvolt = <1800000>;
-               };
+       reg_vref_1v8: regulator-vref-1v8 {
+               compatible = "regulator-fixed";
+               regulator-name = "vref-1v8";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
        };
 };