Don't overwrite pci header type.
Otherwise, multi function bit which pci_init_header_type() sets
appropriately is lost.
Anyway PCI_HEADER_TYPE_NORMAL is zero, so it is unnecessary to zero
which is already zero cleared.
how to test:
run qemu and issue info pci to see whether a device in question is
normal device, not pci-to-pci bridge.
This is handy because guest os isn't required.
tested changes:
The following files are covered by using following commands.
sparc64-softmmu
apb_pci.c, vga-pci.c, cmd646.c, ne2k_pci.c, sun4u.c
ppc-softmmu
grackle_pci.c, cmd646.c, ne2k_pci.c, vga-pci.c, macio.c
ppc-softmmu -M mac99
unin_pci.c(uni-north, uni-north-agp)
ppc64-softmmu
pci-ohci, ne2k_pci, vga-pci, unin_pci.c(u3-agp)
x86_64-softmmu
acpi_piix4.c, ide/piix.c, piix_pci.c
-vga vmware vmware_vga.c
-watchdog i6300esb wdt_i6300esb.c
-usb usb-uhci.c
-sound ac97 ac97.c
-nic model=rtl8139 rtl8139.c
-nic model=pcnet pcnet.c
-balloon virtio virtio-pci.c:
untested changes:
The following changes aren't tested.
prep_pci.c: ppc-softmmu -M prep should cover, but core dumped.
unin_pci.c(uni-north-pci): the caller is commented out.
openpic.c: the caller is commented out in ppc_prep.c
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
c[PCI_REVISION_ID] = 0x01; /* rid revision ro */
c[PCI_CLASS_PROG] = 0x00; /* pi programming interface ro */
pci_config_set_class (c, PCI_CLASS_MULTIMEDIA_AUDIO); /* ro */
- c[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; /* headtyp header type ro */
/* TODO set when bar is registered. no need to override. */
/* nabmar native audio mixer base address rw */
pci_conf[0x08] = 0x03; // revision number
pci_conf[0x09] = 0x00;
pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_OTHER);
- pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
pci_conf[0x3d] = 0x01; // interrupt pin 1
pci_conf[0x40] = 0x01; /* PM io base read only bit */
PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ |
PCI_STATUS_DEVSEL_MEDIUM);
pci_config_set_class(d->config, PCI_CLASS_BRIDGE_HOST);
- pci_set_byte(d->config + PCI_HEADER_TYPE,
- PCI_HEADER_TYPE_NORMAL);
return 0;
}
d->config[0x08] = 0x00; // revision
d->config[0x09] = 0x01;
pci_config_set_class(d->config, PCI_CLASS_BRIDGE_HOST);
- d->config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
return 0;
}
pci_conf[PCI_CLASS_PROG] = 0x8f;
pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_IDE);
- pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
pci_conf[0x51] = 0x04; // enable IDE0
if (d->secondary) {
pci_conf[PCI_CLASS_PROG] = 0x80; // legacy ATA mode
pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_IDE);
- pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
qemu_register_reset(piix3_reset, d);
pci_config_set_vendor_id(d->config, PCI_VENDOR_ID_APPLE);
pci_config_set_device_id(d->config, device_id);
pci_config_set_class(d->config, PCI_CLASS_OTHERS << 8);
- d->config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
d->config[0x3d] = 0x01; // interrupt on pin 1
pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_REALTEK);
pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_REALTEK_8029);
pci_config_set_class(pci_conf, PCI_CLASS_NETWORK_ETHERNET);
- pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
/* TODO: RST# value should be 0. PCI spec 6.2.4 */
pci_conf[PCI_INTERRUPT_PIN] = 1; // interrupt pin 0
pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_IBM);
pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_IBM_OPENPIC2);
pci_config_set_class(pci_conf, PCI_CLASS_SYSTEM_OTHER); // FIXME?
- pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
pci_conf[0x3d] = 0x00; // no interrupt pin
/* Register I/O spaces */
/* TODO: 0 is the default anyway, no need to set it. */
pci_conf[PCI_CLASS_PROG] = 0x00;
pci_config_set_class(pci_conf, PCI_CLASS_NETWORK_ETHERNET);
- pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
/* TODO: not necessary, is set when BAR is registered. */
pci_set_long(pci_conf + PCI_BASE_ADDRESS_0, PCI_BASE_ADDRESS_SPACE_IO);
pci_config_set_device_id(d->dev.config, PCI_DEVICE_ID_INTEL_82441);
d->dev.config[0x08] = 0x02; // revision
pci_config_set_class(d->dev.config, PCI_CLASS_BRIDGE_HOST);
- d->dev.config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
d->dev.config[I440FX_SMRAM] = 0x02;
pci_config_set_class(d->config, PCI_CLASS_BRIDGE_HOST);
d->config[0x0C] = 0x08; // cache_line_size
d->config[0x0D] = 0x10; // latency_timer
- d->config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
d->config[0x34] = 0x00; // capabilities_pointer
return s->bus;
pci_conf[PCI_COMMAND] = PCI_COMMAND_IO | PCI_COMMAND_MASTER;
pci_conf[PCI_REVISION_ID] = RTL8139_PCI_REVID; /* >=0x20 is for 8139C+ */
pci_config_set_class(pci_conf, PCI_CLASS_NETWORK_ETHERNET);
- pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL;
/* TODO: value should be 0 at RST# */
pci_conf[PCI_INTERRUPT_PIN] = 1; /* interrupt pin 0 */
/* TODO: start of capability list, but no capability
s->config[0x09] = 0x00; // programming i/f
pci_config_set_class(s->config, PCI_CLASS_BRIDGE_OTHER);
s->config[0x0D] = 0x0a; // latency_timer
- s->config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
pci_register_bar(s, 0, 0x1000000, PCI_BASE_ADDRESS_SPACE_MEMORY,
ebus_mmio_mapfunc);
pci_config_set_class(d->config, PCI_CLASS_BRIDGE_HOST);
d->config[0x0C] = 0x08; // cache_line_size
d->config[0x0D] = 0x10; // latency_timer
- d->config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
d->config[0x34] = 0x00; // capabilities_pointer
return 0;
}
pci_config_set_class(d->config, PCI_CLASS_BRIDGE_HOST);
d->config[0x0C] = 0x08; // cache_line_size
d->config[0x0D] = 0x10; // latency_timer
- d->config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
// d->config[0x34] = 0x80; // capabilities_pointer
return 0;
}
d->config[0x0C] = 0x08;
/* latency timer */
d->config[0x0D] = 0x10;
- d->config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL;
return 0;
}
pci_config_set_class(d->config, PCI_CLASS_BRIDGE_HOST);
d->config[0x0C] = 0x08; // cache_line_size
d->config[0x0D] = 0x10; // latency_timer
- d->config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
d->config[0x34] = 0x00; // capabilities_pointer
return 0;
}
pci_conf[PCI_REVISION_ID] = 0x01; // revision number
pci_conf[PCI_CLASS_PROG] = 0x00;
pci_config_set_class(pci_conf, PCI_CLASS_SERIAL_USB);
- pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
/* TODO: reset value should be 0. */
pci_conf[PCI_INTERRUPT_PIN] = 4; // interrupt pin 3
pci_conf[0x60] = 0x10; // release number
pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_QEMU);
pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_QEMU_VGA);
pci_config_set_class(pci_conf, PCI_CLASS_DISPLAY_VGA);
- pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
/* XXX: VGA_RAM_SIZE must be a power of two */
pci_register_bar(&d->dev, 0, VGA_RAM_SIZE,
config[0x09] = pif;
pci_config_set_class(config, class_code);
- config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL;
config[0x2c] = vendor & 0xFF;
config[0x2d] = (vendor >> 8) & 0xFF;
pci_config_set_class(s->card.config, PCI_CLASS_DISPLAY_VGA);
s->card.config[PCI_CACHE_LINE_SIZE] = 0x08; /* Cache line size */
s->card.config[PCI_LATENCY_TIMER] = 0x40; /* Latency timer */
- s->card.config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL;
s->card.config[PCI_SUBSYSTEM_VENDOR_ID] = PCI_VENDOR_ID_VMWARE & 0xff;
s->card.config[PCI_SUBSYSTEM_VENDOR_ID + 1] = PCI_VENDOR_ID_VMWARE >> 8;
s->card.config[PCI_SUBSYSTEM_ID] = SVGA_PCI_DEVICE_ID & 0xff;
pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_ESB_9);
pci_config_set_class(pci_conf, PCI_CLASS_SYSTEM_OTHER);
- pci_conf[PCI_HEADER_TYPE] = 0x00;
pci_register_bar(&d->dev, 0, 0x10,
PCI_BASE_ADDRESS_SPACE_MEMORY, i6300esb_map);