rpi: tizen-boot: rpi3: set console in cmdline as u-boot environment

The console in cmdline will be used by kernel as printk console
and tizen-boot script always sets console with UART device. Set
console in cmdline as u-boot environment value console and set
default uart if nothing is set.

Change-Id: I0d2743d445de8c8cf4bd43600fbc8c28a07cd0ea
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

diff --git a/board/raspberrypi/rpi/tizen-boot-rpi3-32b.scr b/board/raspberrypi/rpi/tizen-boot-rpi3-32b.scr
index 9210217..21bea1f 100644 (file)
--- a/board/raspberrypi/rpi/tizen-boot-rpi3-32b.scr
+++ b/board/raspberrypi/rpi/tizen-boot-rpi3-32b.scr
@@ -59,13 +59,19 @@ rootdev=mmcblk${mmcrootdev}p${mmcrootpart}
 bootmode=normal
 fi
 
+# setting console device if noting is set
+if test -z "${console}"; then;
+       setenv console "console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x3f215040"
+fi
+echo "console: ${console}"
+
 # Kernel image
 kernel=zImage
 setenv fdtfile \"bcm2710-rpi-3-b.dtb\"
 setenv boot_prefixes \"/\"
 
 # To use comdline for using serial console. /* Normal mode */
-setenv bootargs \"8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2709.serial=0xed6687d3 bcm2709.uart_clock=48000000 smsc95xx.macaddr=${ethaddr} root=/dev/${rootdev} rw bootmode=${bootmode} bcm2709.boardrev=0xa02082 rootwait console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x3f215040 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 ${opts}\"
+setenv bootargs \"8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2709.serial=0xed6687d3 bcm2709.uart_clock=48000000 smsc95xx.macaddr=${ethaddr} root=/dev/${rootdev} rw bootmode=${bootmode} bcm2709.boardrev=0xa02082 rootwait ${console} vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 ${opts}\"
 
 # Find the ramdisk offset and block count
 part start $bootdev $mmcrootdev $ramdiskpart ramdisk_start

diff --git a/board/raspberrypi/rpi/tizen-boot-rpi3.scr b/board/raspberrypi/rpi/tizen-boot-rpi3.scr
index e9f8dee..da8669c 100644 (file)
--- a/board/raspberrypi/rpi/tizen-boot-rpi3.scr
+++ b/board/raspberrypi/rpi/tizen-boot-rpi3.scr
@@ -59,13 +59,19 @@ rootdev=mmcblk${mmcrootdev}p${mmcrootpart}
 bootmode=normal
 fi
 
+# setting console device if noting is set
+if test -z "${console}"; then;
+       setenv console "console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x3f215040"
+fi
+echo "console: ${console}"
+
 # Kernel image
 kernel=Image
 setenv fdtfile \"bcm2710-rpi-3-b.dtb\"
 setenv boot_prefixes \"/\"
 
 # To use comdline for using serial console. /* Normal mode */
-setenv bootargs \"8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2709.serial=0xed6687d3 bcm2709.uart_clock=48000000 smsc95xx.macaddr=${ethaddr} root=/dev/${rootdev} rw bootmode=${bootmode} bcm2709.boardrev=0xa02082 rootwait console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x3f215040 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 ${opts}\"
+setenv bootargs \"8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2709.serial=0xed6687d3 bcm2709.uart_clock=48000000 smsc95xx.macaddr=${ethaddr} root=/dev/${rootdev} rw bootmode=${bootmode} bcm2709.boardrev=0xa02082 rootwait ${console} vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 ${opts}\"
 
 # Find the ramdisk offset and block count
 part start $bootdev $mmcrootdev $ramdiskpart ramdisk_start