pcmcia pcnet_cs: try setting io_lines to 16 if card setup fails

Some pcnet_cs compatible cards require an exact 16-lines match
of the ioport areas specified in CIS, but set the "iolines"
value in the CIS incorrectly. We can easily work around this
issue -- same as we do in serial_cs -- by first trying setting
iolines to the CIS-specified value, and then trying a 16-line
match.

Reported-and-tested-by: Wolfram Sang <w.sang@pengutronix.de>
Hardware-supplied-by: Jochen Frieling <j.frieling@pengutronix.de>
CC: netdev@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 49279b0..f9b509a 100644 (file)
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -508,7 +508,8 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev,
                           unsigned int vcc,
                           void *priv_data)
 {
-       int *has_shmem = priv_data;
+       int *priv = priv_data;
+       int try = (*priv & 0x1);
        int i;
        cistpl_io_t *io = &cfg->io;
 
@@ -525,77 +526,103 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev,
                i = p_dev->resource[1]->end = 0;
        }
 
-       *has_shmem = ((cfg->mem.nwin == 1) &&
-                     (cfg->mem.win[0].len >= 0x4000));
+       *priv &= ((cfg->mem.nwin == 1) &&
+                 (cfg->mem.win[0].len >= 0x4000)) ? 0x10 : ~0x10;
+
        p_dev->resource[0]->start = io->win[i].base;
        p_dev->resource[0]->end = io->win[i].len;
-       p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+       if (!try)
+               p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+       else
+               p_dev->io_lines = 16;
        if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
                return try_io_port(p_dev);
 
-       return 0;
+       return -EINVAL;
+}
+
+static hw_info_t *pcnet_try_config(struct pcmcia_device *link,
+                                  int *has_shmem, int try)
+{
+       struct net_device *dev = link->priv;
+       hw_info_t *local_hw_info;
+       pcnet_dev_t *info = PRIV(dev);
+       int priv = try;
+       int ret;
+
+       ret = pcmcia_loop_config(link, pcnet_confcheck, &priv);
+       if (ret) {
+               dev_warn(&link->dev, "no useable port range found\n");
+               return NULL;
+       }
+       *has_shmem = (priv & 0x10);
+
+       if (!link->irq)
+               return NULL;
+
+       if (resource_size(link->resource[1]) == 8) {
+               link->conf.Attributes |= CONF_ENABLE_SPKR;
+               link->conf.Status = CCSR_AUDIO_ENA;
+       }
+       if ((link->manf_id == MANFID_IBM) &&
+           (link->card_id == PRODID_IBM_HOME_AND_AWAY))
+               link->conf.ConfigIndex |= 0x10;
+
+       ret = pcmcia_request_configuration(link, &link->conf);
+       if (ret)
+               return NULL;
+
+       dev->irq = link->irq;
+       dev->base_addr = link->resource[0]->start;
+
+       if (info->flags & HAS_MISC_REG) {
+               if ((if_port == 1) || (if_port == 2))
+                       dev->if_port = if_port;
+               else
+                       dev_notice(&link->dev, "invalid if_port requested\n");
+       } else
+               dev->if_port = 0;
+
+       if ((link->conf.ConfigBase == 0x03c0) &&
+           (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
+               dev_info(&link->dev,
+                       "this is an AX88190 card - use axnet_cs instead.\n");
+               return NULL;
+       }
+
+       local_hw_info = get_hwinfo(link);
+       if (!local_hw_info)
+               local_hw_info = get_prom(link);
+       if (!local_hw_info)
+               local_hw_info = get_dl10019(link);
+       if (!local_hw_info)
+               local_hw_info = get_ax88190(link);
+       if (!local_hw_info)
+               local_hw_info = get_hwired(link);
+
+       return local_hw_info;
 }
 
 static int pcnet_config(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
     pcnet_dev_t *info = PRIV(dev);
-    int ret, start_pg, stop_pg, cm_offset;
+    int start_pg, stop_pg, cm_offset;
     int has_shmem = 0;
     hw_info_t *local_hw_info;
 
     dev_dbg(&link->dev, "pcnet_config\n");
 
-    ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem);
-    if (ret)
-       goto failed;
-
-    if (!link->irq)
-           goto failed;
-
-    if (resource_size(link->resource[1]) == 8) {
-       link->conf.Attributes |= CONF_ENABLE_SPKR;
-       link->conf.Status = CCSR_AUDIO_ENA;
-    }
-    if ((link->manf_id == MANFID_IBM) &&
-       (link->card_id == PRODID_IBM_HOME_AND_AWAY))
-       link->conf.ConfigIndex |= 0x10;
-
-    ret = pcmcia_request_configuration(link, &link->conf);
-    if (ret)
-           goto failed;
-    dev->irq = link->irq;
-    dev->base_addr = link->resource[0]->start;
-    if (info->flags & HAS_MISC_REG) {
-       if ((if_port == 1) || (if_port == 2))
-           dev->if_port = if_port;
-       else
-           printk(KERN_NOTICE "pcnet_cs: invalid if_port requested\n");
-    } else {
-       dev->if_port = 0;
-    }
-
-    if ((link->conf.ConfigBase == 0x03c0) &&
-       (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
-       printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n");
-       printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n");
-       goto failed;
-    }
-
-    local_hw_info = get_hwinfo(link);
-    if (local_hw_info == NULL)
-       local_hw_info = get_prom(link);
-    if (local_hw_info == NULL)
-       local_hw_info = get_dl10019(link);
-    if (local_hw_info == NULL)
-       local_hw_info = get_ax88190(link);
-    if (local_hw_info == NULL)
-       local_hw_info = get_hwired(link);
-
-    if (local_hw_info == NULL) {
-       printk(KERN_NOTICE "pcnet_cs: unable to read hardware net"
-              " address for io base %#3lx\n", dev->base_addr);
-       goto failed;
+    local_hw_info = pcnet_try_config(link, &has_shmem, 0);
+    if (!local_hw_info) {
+           /* check whether forcing io_lines to 16 helps... */
+           pcmcia_disable_device(link);
+           local_hw_info = pcnet_try_config(link, &has_shmem, 1);
+           if (local_hw_info == NULL) {
+                   dev_notice(&link->dev, "unable to read hardware net"
+                           " address for io base %#3lx\n", dev->base_addr);
+                   goto failed;
+           }
     }
 
     info->flags = local_hw_info->flags;