+=== release 1.11.1 ===
+
+2017-01-12 Sebastian Dröge <slomo@coaxion.net>
+
+ * configure.ac:
+ releasing 1.11.1
+
+2017-01-12 14:35:09 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/da.po:
+ * po/de.po:
+ * po/fr.po:
+ * po/hr.po:
+ * po/id.po:
+ * po/nb.po:
+ * po/pl.po:
+ * po/ru.po:
+ * po/sr.po:
+ * po/uk.po:
+ * po/vi.po:
+ * po/zh_CN.po:
+ po: Update translations
+
+2017-01-12 22:28:50 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Preserve seqnum on EOS events
+ When converting EOS to/from our custom fake EOS event,
+ preserve any seqnum on the original event.
+
+2017-01-12 10:51:34 +0100 Edward Hervey <edward@centricular.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Avoid races when setting up typefind
+ The state of urisourcebin (and all elements contained within) can
+ change at any point in time, including when setting up the typefind
+ element.
+ In order to avoid ending up with typefind starting without being fully
+ connected, lock the state and connect to the 'have-type' signal.
+
+2017-01-11 18:24:38 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/video/video-converter.c:
+ video-converter: Fix crashes in fast-paths when converting interlaced formats with different vertical subsampling
+ E.g. the following pipelines fail because chroma values after the last
+ line are read (note: 486 % 4 == 2):
+ gst-launch-1.0 videotestsrc ! "video/x-raw,interlace-mode=interleaved,width=720,height=486,format=UYVY" ! videoconvert ! "video/x-raw,format=I420" ! fakesink
+ gst-launch-1.0 videotestsrc ! "video/x-raw,interlace-mode=interleaved,width=720,height=486,format=I420" ! videoconvert ! "video/x-raw,format=UYVY" ! fakesink
+ gst-launch-1.0 videotestsrc ! "video/x-raw,interlace-mode=interleaved,width=720,height=486,format=I420" ! videoconvert ! "video/x-raw,format=AYUV" ! fakesink
+
+2017-01-11 22:48:02 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Drop fake EOS if the pad got relinked
+ If our pad got relinked in since the fake-EOS was sent to the
+ pad, then drop the fake-EOS event.
+ CID: 1398546
+
+2017-01-11 17:26:01 +0530 Arun Raghavan <arun@arunraghavan.net>
+
+ * common:
+ common: Revert unintentional change in previous commit
+
+2017-01-11 17:14:46 +0530 Arun Raghavan <arun@arunraghavan.net>
+
+ * common:
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Drop some dead code
+ The ret == GST_STATE_CHANGE_FAILURE is handled in the previous for loop
+ already.
+ CID: 1398544
+
+2017-01-11 12:35:40 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Clear pad from pending list if it was linked
+ If not, the other slots might try to link the pad again.
+ This can happen when the demuxer has multiple src pads
+ and their caps are identical
+ https://bugzilla.gnome.org/show_bug.cgi?id=777121
+
+2017-01-11 08:22:21 +0100 Edward Hervey <edward@centricular.com>
+
+ * win32/common/libgstvideo.def:
+ win32: update def file
+
+2017-01-10 16:36:08 +0200 Vivia Nikolaidou <vivia@ahiru.eu>
+
+ * tests/check/libs/videotimecode.c:
+ videotimecode: Added unit test for GstVideoTimeCodeInterval
+ https://bugzilla.gnome.org/show_bug.cgi?id=776447
+
+2016-12-29 14:42:52 +0200 Vivia Nikolaidou <vivia@toolsonair.com>
+
+ * gst-libs/gst/video/gstvideotimecode.c:
+ * gst-libs/gst/video/gstvideotimecode.h:
+ videotimecode: New GstVideoTimeCodeInterval type, ability to add to a GstVideoTimeCode
+ Sometimes there is a human-oriented timecode that represents an
+ interval between two other timecodes. It corresponds to the human
+ perception of "add X hours" or "add X seconds" to a specific timecode,
+ taking drop-frame oddities into account. This interval-representing
+ timecode is now a GstVideoTimeCodeInterval. Also added function to add it to
+ a GstVideoTimeCode.
+ https://bugzilla.gnome.org/show_bug.cgi?id=776447
+
+2017-01-10 21:52:34 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Configure typefind element for non-streaming uri
+ To ensure configuring adaptivedemux if needed,
+ setup typefind element even if uri is not matched to streaming protocol.
+ https://bugzilla.gnome.org/show_bug.cgi?id=776458
+
+2016-12-24 16:44:26 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Use GList for typefind elements
+ We need typefind elements per source element's srcpad
+ https://bugzilla.gnome.org/show_bug.cgi?id=776458
+
+2016-12-24 16:15:45 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Remove unused signal handler variable
+ Remove never used handler id
+ https://bugzilla.gnome.org/show_bug.cgi?id=776458
+
+2017-01-10 08:57:51 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/pbutils/encoding-profile.c:
+ pbutils: Fix annotation in gst_encoding_profile_set_preset
+
+2017-01-09 19:45:25 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * win32/common/libgstvideo.def:
+ win32: update .def file for new video API
+
+2017-01-09 19:10:10 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * tests/check/libs/audiodecoder.c:
+ tests: audiodecoder: fix another c99-ism
+ Missed one.
+
+2017-01-09 19:02:57 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * sys/ximage/ximagesink.c:
+ * tests/check/libs/audiodecoder.c:
+ * tests/check/libs/sdp.c:
+ * tests/check/libs/videodecoder.c:
+ Fix indentation
+
+2017-01-09 18:58:42 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * tests/check/libs/audiodecoder.c:
+ tests: audiodecoder: fix compiler warnings due to c99-ism
+ audiodecoder.c:160:5: error: ‘for’ loop initial declarations are only allowed in C99 mode
+
+2016-12-30 20:27:48 +0200 Vivia Nikolaidou <vivia@ahiru.eu>
+
+ * tests/check/libs/videotimecode.c:
+ videotimecode: Add GstValue functions unit test
+ https://bugzilla.gnome.org/show_bug.cgi?id=772764
+
+2016-12-30 19:08:16 +0200 Vivia Nikolaidou <vivia@toolsonair.com>
+
+ * gst-libs/gst/video/gstvideotimecode.c:
+ * gst-libs/gst/video/gstvideotimecode.h:
+ videotimecode: Add GstValue functions
+ Add compare, serialization and deserialization functions
+ https://bugzilla.gnome.org/show_bug.cgi?id=772764
+
+2017-01-08 21:53:27 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Clear EOS state with stream-start/flush-stop event
+ The EOS state marker should cleared on stream-start or flush-stop
+ https://bugzilla.gnome.org/show_bug.cgi?id=777009
+
+2017-01-08 21:36:04 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Never push actual EOS event to slot
+ Due to the special nature of adaptivedemux, reconfigure happens
+ frequently with seek/track-change.
+ In very exceptional cases, the following sequence is possible:
+ * EOS event is pushed to queue element and still buffers are queued
+ * During draining remaining buffers, reconfiguration downstream
+ happens due to track switch.
+ * The queue gets a not-linked flow return from downstream
+ * Because the sinkpad is EOS, the queue registers an
+ error on the bus, causing the pipeline to fail.
+ Avoid the sinkpad getting marked EOS in the first place, by using a
+ custom event in place of EOS.
+ https://bugzilla.gnome.org/show_bug.cgi?id=777009
+
+2017-01-09 21:31:37 +1100 Jan Schmidt <jan@centricular.com>
+
+ * tests/check/libs/video.c:
+ testsuite: Add some test checks for gst_video_guess_framerate()
+
+2017-01-09 21:25:26 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst-libs/gst/video/video.c:
+ gst_video_guess_framerate: Don't throw away all precision
+ When operating on framerates near 10000fps, at least keep 1
+ digit of precision for calculations
+
+2017-01-06 12:56:00 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * win32/common/libgstpbutils.def:
+ Update win32 def files
+
+2017-01-06 11:39:27 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/pbutils/encoding-target.c:
+ encoding-target: Properly free temporary list
+
+2017-01-04 14:27:40 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * docs/libs/gst-plugins-base-libs-sections.txt:
+ * gst-libs/gst/pbutils/encoding-profile.c:
+ * gst-libs/gst/pbutils/encoding-profile.h:
+ encoding-profile: Add a way to copy an encoding profile
+ It is often usefull to make sure that you get a full copy of a profile.
+ For example you want to let the user modify it in the user interface
+ but still keep an unchanged version for later use.
+ API:
+ gst_encoding_profile_copy
+
+2017-01-04 14:56:36 +0100 Guillaume Desmottes <guillaume.desmottes@collabora.co.uk>
+
+ * pkgconfig/Makefile.am:
+ * pkgconfig/gstreamer-allocators-uninstalled.pc.in:
+ * pkgconfig/gstreamer-app-uninstalled.pc.in:
+ * pkgconfig/gstreamer-audio-uninstalled.pc.in:
+ * pkgconfig/gstreamer-fft-uninstalled.pc.in:
+ * pkgconfig/gstreamer-pbutils-uninstalled.pc.in:
+ * pkgconfig/gstreamer-plugins-base-uninstalled.pc.in:
+ * pkgconfig/gstreamer-riff-uninstalled.pc.in:
+ * pkgconfig/gstreamer-rtp-uninstalled.pc.in:
+ * pkgconfig/gstreamer-rtsp-uninstalled.pc.in:
+ * pkgconfig/gstreamer-sdp-uninstalled.pc.in:
+ * pkgconfig/gstreamer-tag-uninstalled.pc.in:
+ * pkgconfig/gstreamer-video-uninstalled.pc.in:
+ * pkgconfig/meson.build:
+ meson: generate pkg-config -uninstalled pc files
+ Generating those files is useful for users building the GStreamer stack
+ using meson and having to link it to another project which is still
+ using the autotools.
+ https://bugzilla.gnome.org/show_bug.cgi?id=776810
+
+2017-01-04 11:21:51 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst/encoding/gstencodebin.c:
+ encodebin: Fix stream_group_free when creating it went bad
+ Avoiding trying to use NULL pointers
+
+2016-12-30 17:55:18 +0100 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * gst/playback/gstplaysink.c:
+ playsink: do not link to audio or video filter using padname
+ ... as a sinkpad need not be called "sink", and it is not the case
+ for e.g. timeoverlay (and friends).
+ Fixes https://bugzilla.gnome.org/show_bug.cgi?id=776623
+
+2017-01-04 13:44:53 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/tcp/gstmultihandlesink.c:
+ multihandlesink: fix some property descriptions
+
+2017-01-03 02:23:43 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst/playback/gstdecodebin2.c:
+ * gst/playback/gstparsebin.c:
+ playback: Fix a small race on decodebin/parsebin shutdown.
+ When shutting down decodebin2 and parsebin, they set their
+ output pads to flushing, and there is a very small window
+ where elements might send a sticky event such as a tag event
+ (which silently fails due to flushing) and then sends a buffer,
+ and the buffer will return GST_FLOW_ERROR because it can't
+ forward sticky events. The element will then send an error
+ message on the bus. This can also happen when elements send EOS
+ just as shutdown is happening. Since we're about to destroy all
+ the elements inside parsebin and decodebin anyway, just discard
+ error messages from them.
+ A nicer but more difficult fix for GStreamer 2.0 is to make
+ all event pushing / handling in core return a GstFlowReturn
+ like buffers do, so we can report a FLUSHING state cleanly.
+
+2017-01-02 12:54:32 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/encoding/gstencodebin.c:
+ encodebin: fix queue property types when setting
+
+2015-03-13 18:04:31 +0800 Song Bing <b06498@freescale.com>
+
+ * gst/encoding/gstencodebin.c:
+ encodebin: allow more buffers in output queue for better performance
+ https://bugzilla.gnome.org/show_bug.cgi?id=744191
+
+2017-01-02 17:56:36 +0530 Arun Raghavan <arun@arunraghavan.net>
+
+ * gst/audioconvert/gstaudioconvert.c:
+ audioconvert: Relocate a NULL check before accessing converter
+ CID 1396745
+
+2015-07-02 07:23:23 +0200 Tobias Mueller <muelli@cryptobitch.de>
+
+ * gst-libs/gst/app/gstappsrc.c:
+ appsrc: fix compiler warning
+ Initialize min and max _get_property() to gets rid of these
+ compiler warnings:
+ gstappsrc.c:741:7: error: 'max' may be used uninitialized in this function
+ g_value_set_int64 (value, max);
+ ^
+ gstappsrc.c:733:7: error: 'min' may be used uninitialized in this function
+ g_value_set_int64 (value, min);
+ ^
+ Which happens because gcc doesn't know that GST_IS_APP_SRC will never
+ fail here.
+ https://bugzilla.gnome.org/show_bug.cgi?id=752052
+
+2015-11-25 11:30:42 +0000 Stuart Weaver <stuart.weaver@datapath.co.uk>
+
+ * gst-libs/gst/rtsp/gstrtspurl.c:
+ rtsp-url: unescape special chars in user/pass part of URL
+ This way special characters such as '@' can be used in
+ usernames or passwords, e.g.
+ rtsp://view:%40dm%4An@<IP-ADDR>/media/camera1
+ will now parse username and password into:
+ User: view
+ Pass: @dm:n
+ https://bugzilla.gnome.org/show_bug.cgi?id=758389
+
+2015-11-18 13:59:30 +0900 Vineeth TM <vineeth.tm@samsung.com>
+
+ * gst-libs/gst/pbutils/gstdiscoverer.c:
+ discoverer: Add support to dump dot files
+ Dump graphs during error/warning messages and discover is done
+ https://bugzilla.gnome.org/show_bug.cgi?id=758259
+
+2016-12-24 10:15:24 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * tests/check/libs/tag.c:
+ tests: tag: add unit test for ID3v2 UTF-16 string list parsing
+ https://bugzilla.gnome.org/show_bug.cgi?id=770355
+
+2016-12-24 14:32:34 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * tests/check/libs/tag.c:
+ tests: tag: add test for ID3v2 extended header parsing
+ https://bugzilla.gnome.org/show_bug.cgi?id=770355
+
+2016-08-24 11:39:39 -0600 Thomas Bluemel <tbluemel@control4.com>
+
+ * gst-libs/gst/tag/id3v2frames.c:
+ id3v2: fix splitting strings in ISO-8859-1 and UTF-16 formats
+ When parsing NUL-terminated strings, do not include the terminating
+ NUL byte(s). Depending on the encoding used, either g_utf8_validate()
+ failed due to this, or worse the call to g_utf16_to_utf8() would
+ return 0 items read on an empty string, causing it to fail parsing
+ certain frames.
+ https://bugzilla.gnome.org/show_bug.cgi?id=770355
+
+2016-08-24 10:33:14 -0600 Thomas Bluemel <tbluemel@control4.com>
+
+ * gst-libs/gst/tag/id3v2.c:
+ id3v2: fix handling of tags with extended headers
+ The extended header size value does not include itself.
+ https://bugzilla.gnome.org/show_bug.cgi?id=770355
+
+2016-12-23 18:08:43 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/pbutils/encoding-profile.c:
+ encoding-profile: Initialize variables to avoid build failures
+ encoding-profile.c: In function ‘get_profile_format_from_possible_factory_name’:
+ encoding-profile.c:1532:6: error: ‘fact’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
+ if (fact)
+ ^
+ encoding-profile.c: In function ‘profile_from_string’:
+ encoding-profile.c:1720:6: error: ‘res’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
+ if (profile)
+ ^
+ cc1: all warnings being treated as errors
+
+2016-12-23 14:23:48 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/pbutils/encoding-profile.c:
+ encoding-profile: Allow using factory names in serialization format
+ Instead of enforcing the user to know and understand caps to describe
+ the encoding format, let him use element factory names directly.
+ This also makes it possible to ensure that a specific encodore/muxer
+ is used instead of letting the ranking system do it.
+ It is now possible to describe an encoding format simply specifying:
+ matroskamux:x264enc:vobisenc
+ Factor out functions in the parsing, cleaning up the whole thing.
+ Update documentation.
+
+2016-12-21 19:32:41 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/pbutils/encoding-profile.c:
+ encoding-profile: Also take into account preset name when comparing profiles
+
+2016-12-21 13:24:37 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/pbutils/encoding-profile.c:
+ * gst-libs/gst/pbutils/encoding-target.c:
+ encoding-profile: Handle path to serialized target when deserializing a profile
+ The synthax is path/to/encoding/profile.gep:profilename
+
+2016-12-21 12:13:38 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/pbutils/encoding-target.h:
+ encoding-target: Add 'file-extension' as a known category
+
+2016-12-21 11:05:30 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/pbutils/encoding-target.c:
+ encoding-target: Allow using name and targets from serialized file
+ We used to only care about the name of the files even if the name
+ is defined in the encoding target serialized file.
+ That commit also allows user to define several names for a single
+ target file (using a ';' between the names) which allows us to have
+ a target for youtube that is called 'youtube;yt' or a target for
+ 'ogg;ogv;oga' file extension.
+
+2016-12-21 11:01:27 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/pbutils/encoding-target.c:
+ encoding-target: Auto convert loading target name to lowercase
+ We *only* support lowercase encoding target names so we can just
+ handle user to use uper case ones converting them.
+
+2016-12-21 10:02:31 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/pbutils/encoding-profile.c:
+ * gst-libs/gst/pbutils/encoding-target.c:
+ pbutils: Add documentation about encoding targets
+
+2016-12-10 11:43:47 +0900 hoonhee.lee <hoonhee.lee@lge.com>
+
+ * tests/examples/decodebin_next/playbin-test.c:
+ playbin-test: Don't use removed playbin3 'auto-select-streams' property
+ https://bugzilla.gnome.org/show_bug.cgi?id=775917
+
+2016-09-02 15:23:18 +0200 Carlos Rafael Giani <dv@pseudoterminal.org>
+
+ * gst/audiotestsrc/gstaudiotestsrc.c:
+ audiotestsrc: Fix incorrect start of tick waveform
+ Make sure ticks start with an accumulator value of 0 by incrementing it
+ after filling in samples instead of before and by resetting the accumulator
+ every time a tick begins. This prevents it from being discontinuous at the
+ beginning of the tick.
+ https://bugzilla.gnome.org/show_bug.cgi?id=774050
+
+2016-12-22 18:47:19 +0100 Nicolas Dechesne <nicolas.dechesne@linaro.org>
+
+ * tools/gst-play.c:
+ tools: gst-play: set GST_GL_XINITHREADS
+ This ensure that XInitThreads is called and so gl contexts are properly
+ initialized.
+ https://bugzilla.gnome.org/show_bug.cgi?id=776403
+
+2014-06-26 18:01:06 -0700 Evan Nemerson <evan@nemerson.com>
+
+ * docs/libs/gst-plugins-base-libs-sections.txt:
+ * gst-libs/gst/audio/gstaudioringbuffer.c:
+ * gst-libs/gst/audio/gstaudioringbuffer.h:
+ * win32/common/libgstaudio.def:
+ audioringbuffer: add set_callback_full() for g-i
+ https://bugzilla.gnome.org/show_bug.cgi?id=678301
+
+2016-12-20 12:33:12 +0100 Nicola Murino <nicola.murino@gmail.com>
+
+ * gst/tcp/gsttcpclientsrc.c:
+ * gst/tcp/gsttcpclientsrc.h:
+ tcpclientsrc: add timeout property
+ https://bugzilla.gnome.org/show_bug.cgi?id=749567
+
+2016-12-21 00:11:06 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst/playback/gstparsebin.c:
+ parsebin: Ignore failure to send sticky events
+ When plugging and then exposing a parser, don't fail
+ if it fails to send sticky events. The most likely
+ reason is that things were flushed due to the app
+ immediately doing a seek, but we can't detect flushing
+ separately to other error conditions without a
+ gst_pad_send_event_full() core function that returns
+ a GstFlowReturn.
+
+2016-12-20 13:00:59 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/riff/riff-media.c:
+ riff-media: Fix up last commit
+
+2015-03-28 18:16:16 +0100 Nicola Murino <nicola.murino@gmail.com>
+
+ * gst-libs/gst/riff/riff-ids.h:
+ * gst-libs/gst/riff/riff-media.c:
+ riff: add ADPCM_G722 support
+ https://bugzilla.gnome.org/show_bug.cgi?id=746574
+
+2016-12-19 15:20:35 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * tests/check/elements/encodebin.c:
+ tests: Fix build
+
+2016-12-19 15:08:12 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst/encoding/gstencodebin.c:
+ encodebin: Fix build initializing sprof
+
+2016-12-16 22:11:41 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst/encoding/gstencodebin.c:
+ * tests/check/elements/encodebin.c:
+ encodebin: Fallback to other profile if we fail with one
+ In some case we might have EncodingProfile that will be defined
+ in a way that, for example if a Preset is not present, another
+ profile for that stream should be used.
+ A test is added showing the feature.
+ https://bugzilla.gnome.org/show_bug.cgi?id=776188
+
+2016-12-16 16:27:04 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst/encoding/gstencodebin.c:
+ encodebin: Enhance error debug when failing to create an encoder
+
+2016-12-18 12:29:42 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst-libs/gst/tag/id3v2.c:
+ tag: id3v2: turn redundant check into an assert
+ We checked this already earlier, so this is dead code.
+ Leave an assert in place for consistency with the other
+ branch and in case the rest of the code changes.
+ CID 1397350.
+
+2016-12-17 21:58:29 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/pbutils/gstdiscoverer.c:
+ discoverer: Get caps from the element's srcpad if possible
+ The caps put into the stream topology by decodebin are the caps at the
+ moment the pads are exposed on it. This is usually before decoders
+ received any buffers.
+ In discoverer we however wait for pre-roll, which ensures that each
+ decoder handled buffers already. At this point, there might be more
+ information known about the caps already that we could make use of.
+ One example here is extra information stored in the SEI of H264, like
+ the multiview-mode. This will be known if there is a SEI before the
+ first keyframe, but decodebin won't put this into the topology as it
+ only waits for the initial caps of h264parse (which come directly after
+ SPS/PPS).
+ With this change, the multiview-mode is in the caps reported by
+ discoverer in many cases.
+
+2016-12-17 21:35:24 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/playback/gstdecodebin2.c:
+ decodebin2: Put the correct element srcpad into the topology for the very last element of a chain
+ We were putting the decode pad there, which is the ghostpad linked to
+ the last element. The decode pad is already in the pad field.
+
+2016-12-17 21:34:40 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/playback/gstdecodebin2.c:
+ decodebin2: Put the correct pad into the stream-topology if a parser/converter is used
+ We have to take the capsfilter into account then as the elements are not
+ linked directly. Previously this caused NULL be set in these cases.
+
+2016-12-16 17:39:59 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst-plugins-base.spec.in:
+ Actually delete .spec.in file as well
+ Only removed it from build description.
+
+2016-12-16 11:11:57 -0300 Thibault Saunier <tsaunier@gnome.org>
+
+ * gst-libs/gst/pbutils/encoding-profile.c:
+ * gst/encoding/gstencodebin.c:
+ * gst/typefind/gsttypefindfunctions.c:
+ encoding-profile: Fix documentation and port to gtk markdown
+ And remove some trailling whitepsaces
+
+2016-12-16 09:59:25 -0300 Thibault Saunier <tsaunier@gnome.org>
+
+ * docs/libs/meson.build:
+ * docs/meson.build:
+ * meson.build:
+ * meson_options.txt:
+ meson:doc: Build libraries documentations
+
+2016-12-16 09:58:15 -0300 Thibault Saunier <tsaunier@gnome.org>
+
+ * gst-libs/gst/pbutils/encoding-profile.c:
+ base: Actually support using the default encoding target
+
+2016-12-15 16:12:02 -0300 Thibault Saunier <tsaunier@gnome.org>
+
+ * gst-libs/gst/pbutils/encoding-target.c:
+ encoding-target: Remove useless check for local presence
+
+2016-12-15 16:10:55 -0300 Thibault Saunier <tsaunier@gnome.org>
+
+ * gst-libs/gst/pbutils/encoding-profile.c:
+ pbutils: Add safe guard too encoding profile API
+
+2016-12-15 10:57:14 -0300 Thibault Saunier <tsaunier@gnome.org>
+
+ * gst-libs/gst/audio/audio-channels.c:
+ * gst-libs/gst/pbutils/encoding-profile.c:
+ audio: Fix introspection annotation
+ In gst_audio_check_valid_channel_positions the mask
+ is an out parameter.
+ And minor conversion from a print to a GST_ERROR.
+
+2016-12-14 18:06:09 -0300 Thibault Saunier <tsaunier@gnome.org>
+
+ * gst-libs/gst/pbutils/encoding-target.c:
+ encoding-target: Handle GST_ENCODING_TARGET_PATH in list_all
+ And fix the compare_target function
+
+2016-12-15 16:29:02 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/playback/gstdecodebin2.c:
+ decodebin: For adaptive streaming, ensure to put the buffering multiqueue after a parser or demuxer
+ There are cases when there is no demuxer involved that could do the
+ buffering, e.g. HLS with raw MP3 or AAC. In this case we want to place
+ the buffering multiqueue after the parser.
+ Before this change, we've considered the first element after the
+ adaptive streaming demuxer as a parser. This is not always true, e.g.
+ id3demux. Instead we now wait until we actually have a parser (or
+ decoder).
+ Fixes playback on such HLS streams.
+
+2016-12-14 09:48:02 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * .gitignore:
+ * Makefile.am:
+ * configure.ac:
+ Remove generated .spec file
+ Likely extremely bitrotten, and we should not ship this anyway.
+
+2016-12-13 22:45:02 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst-libs/gst/rtsp/gstrtspmessage.c:
+ * gst-libs/gst/rtsp/gstrtspmessage.h:
+ * tests/check/libs/rtsp.c:
+ * win32/common/libgstrtsp.def:
+ rtsp: add boxed types for new authentication credential API
+ To make the structs usable in bindings, and fix
+ gstrtspmessage.c:1188: Warning: GstRtsp:
+ gst_rtsp_message_parse_auth_credentials: return value: Invalid
+ non-constant return of bare structure or union; register as
+ boxed type or (skip)
+ https://bugzilla.gnome.org/show_bug.cgi?id=774416
+
+2016-12-13 22:26:08 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/pango/gstbasetextoverlay.c:
+ * tests/check/elements/videotestsrc.c:
+ gst: Don't declare variables inside the for loop header
+ This is a C99 feature.
+
+2016-12-13 09:44:09 +0000 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * gst-libs/gst/audio/gstaudioringbuffer.c:
+ audioringbuffer: do not require 4 byte multiple for encoded MPEG
+ Bytes per frame doesn't make sense for encoded audio.
+ https://bugzilla.gnome.org/show_bug.cgi?id=776038
+
+2016-12-12 14:50:11 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gstrawcaps.h:
+ playback: Add ANY caps features to default text raw caps
+ Raw text caps with any caps features should be also default raw caps
+ https://bugzilla.gnome.org/show_bug.cgi?id=775967
+
+2016-12-09 17:08:20 -0300 Thibault Saunier <tsaunier@gnome.org>
+
+ * meson.build:
+ meson: Support building without Gst debug
+
+2016-12-09 17:36:47 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/tag/gstxmptag.c:
+ xmptag: Don't leak the namespace string if there are multiple
+ https://bugzilla.gnome.org/show_bug.cgi?id=775887
+
+2016-12-09 17:59:09 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst-libs/gst/tag/id3v2.c:
+ id3v2: Clarify id3v2_add_id3v2_frame_blob_to_taglist()
+ Pass the frame data and size explicitly to
+ id3v2_add_id3v2_frame_blob_to_taglist() and add a
+ comment that it's being deliberately / manually
+ passed the full ID3v2 frame including header.
+
+2016-12-09 17:57:52 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst-libs/gst/tag/id3v2.c:
+ id3v2: Add missing overrun check for frame sizes
+ When frames claim to have a footer, ensure they
+ are large enough to contain one to avoid an invalid
+ read overrun.
+ Spotted by Joshua Yabut
+
+2016-11-22 23:08:09 +1100 Jan Schmidt <jan@centricular.com>
+
+ * ext/ogg/gstogmparse.c:
+ ogg: Fix element factory klass for OGM parsers
+ They're parsers, not decoders, so fix the klass info
+ accordingly.
+
+2016-12-08 23:01:28 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * Makefile.am:
+ * configure.ac:
+ * docs/Makefile.am:
+ * docs/design/Makefile.am:
+ * docs/design/draft-hw-acceleration.txt:
+ * docs/design/draft-va.txt:
+ docs: design: remove outdated draft docs (hw-acceleration, va)
+
+2016-12-08 22:59:58 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * docs/design/Makefile.am:
+ * docs/design/design-audiosinks.txt:
+ * docs/design/design-decodebin.txt:
+ * docs/design/design-encoding.txt:
+ * docs/design/design-orc-integration.txt:
+ * docs/design/draft-keyframe-force.txt:
+ * docs/design/draft-subtitle-overlays.txt:
+ * docs/design/part-interlaced-video.txt:
+ * docs/design/part-mediatype-audio-raw.txt:
+ * docs/design/part-mediatype-text-raw.txt:
+ * docs/design/part-mediatype-video-raw.txt:
+ * docs/design/part-playbin.txt:
+ * docs/design/part-stereo-multiview-video.markdown:
+ docs: design: move most design docs to gst-docs module
+
+2016-12-03 23:01:53 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gstdecodebin3-parse.c:
+ * gst/playback/gstdecodebin3.c:
+ decodebin3: Remove unused variable
+ https://bugzilla.gnome.org/show_bug.cgi?id=773341
+
+2016-12-03 22:46:20 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gstdecodebin3-parse.c:
+ decodebin3: More cleanup DecodebinOutputStream and MultiQueueSlot
+ When removing DecodebinInputStream, cleanup DecodebinOutputStream and
+ MultiQueueSlot also if they were drained.
+ https://bugzilla.gnome.org/show_bug.cgi?id=773341
+
+2016-12-03 22:37:55 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gstdecodebin3.c:
+ decodebin3: Drop duration query during _input_pad_unlink ()
+ Playbin3 takes lock when querying duration and handling
+ stream-collection message. So,to post stream-collection message,
+ duration query should be dropped when input pad is being unlinked.
+ https://bugzilla.gnome.org/show_bug.cgi?id=773341
+
+2016-12-03 22:12:21 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gstdecodebin3.c:
+ decodebin3: Update stream-collection with _input_pad_unlink()
+ Since parsebin does not post new stream-collection message when
+ it was being removed, decodebin3 should update it itself.
+ https://bugzilla.gnome.org/show_bug.cgi?id=773341
+
+2016-12-03 22:28:28 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gstdecodebin3.c:
+ decodebin3: Cleanup no more used DecodebinInput
+ Remove DecodebinInput using gst_element_call_async() API.
+ https://bugzilla.gnome.org/show_bug.cgi?id=773341
+
+2016-12-03 21:50:47 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gstdecodebin3.c:
+ decodebin3: Cleanup no more used MultiQueueSlot
+ Since MultiQueueSlot cannot be removed inside of streaming thread,
+ use gst_element_call_async() API.
+ https://bugzilla.gnome.org/show_bug.cgi?id=773341
+
+2016-12-03 21:42:30 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gstdecodebin3-parse.c:
+ * gst/playback/gstdecodebin3.c:
+ decodebin3: Send custom-eos event to notify drained state
+ Likewise how urisourcebin is doing, use custom event if other streams
+ are still alive.
+ https://bugzilla.gnome.org/show_bug.cgi?id=773341
+
+2016-12-03 20:44:21 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gstplaybin3.c:
+ playbin3: Reconfigure playsink again with pad-removed
+ If selected streams and actived streams are matched,
+ do reconfigure of playsink again with pad-removed signal
+ https://bugzilla.gnome.org/show_bug.cgi?id=773341
+
+2016-10-25 21:06:40 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gstdecodebin3.c:
+ * gst/playback/gstplaybin3.c:
+ playback: Remove trailing whitespace
+ https://bugzilla.gnome.org/show_bug.cgi?id=773341
+
+2016-10-23 22:10:39 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Try to link output slot before cleanup
+ Before cleaning up output slot, check pending pads first, if available.
+ Then, cleanup it only if linking was failed.
+ https://bugzilla.gnome.org/show_bug.cgi?id=773341
+
+2016-10-22 18:53:17 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Cleanup unused output slot
+ Since urisourcebin cannot cleanup unused output slot
+ in streaming thread, it will be handled in thread pool
+ with gst_element_call_async ().
+ https://bugzilla.gnome.org/show_bug.cgi?id=773341
+
+2016-12-06 16:29:23 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/tag/gsttagdemux.c:
+ tagdemux: Fix crash when shutting down element during getrange()
+ Ensure that nothing is in any of the streaming thread functions
+ anymore when going from PAUSED to READY. While the parent's state change
+ function has deactivated all pads, there is nothing preventing
+ downstream from activating our srcpad again and calling the getrange()
+ function. Although we're in READY!
+ https://bugzilla.gnome.org/show_bug.cgi?id=775687
+
+2016-12-03 08:19:15 +0100 Edward Hervey <bilboed@bilboed.com>
+
+ * README:
+ * common:
+ Automatic update of common submodule
+ From f980fd9 to 39ac2f5
+
+2016-12-02 15:12:12 -0800 Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
+
+ * gst/typefind/gsttypefindfunctions.c:
+ typefind: add another test to itc typefinder
+ Report certainty after every test passes.
+ Additionally:
+ - Remove self-explanatory comment.
+
+2016-12-01 19:57:47 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/subparse/gstssaparse.c:
+ ssaparse: Free initialization section before storing the next one
+ If getting multiple caps events.
+ https://bugzilla.gnome.org/show_bug.cgi?id=775480
+
+2016-12-01 15:12:59 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/ogg/gstoggdemux.c:
+ oggdemux: Don't end up ignoring caps just because there are no headers for this stream
+ https://bugzilla.gnome.org/show_bug.cgi?id=775459
+
+2016-11-30 10:55:16 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/audioconvert/gstaudioconvert.c:
+ audioconvert: Error out if mapping input/output buffer failed
+
+2016-11-30 10:48:40 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/audioconvert/gstaudioconvert.c:
+ audioconvert: Don't map the input buffer in in-place mode
+ Input and output buffer are the same, let's not do unnecessary work.
+ https://bugzilla.gnome.org/show_bug.cgi?id=775369
+
+2016-11-30 10:43:50 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/audio/audio-converter.c:
+ audio-converter: In passthrough, also don't copy if in and out block are the same
+ In and out array are usually different, they are stack allocated arrays.
+ However the blocks inside them still can be the same.
+ https://bugzilla.gnome.org/show_bug.cgi?id=775369
+
+2016-11-30 10:36:14 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/audioconvert/gstaudioconvert.c:
+ audioconvert: Don't call transform_ip() in passthrough mode
+ https://bugzilla.gnome.org/show_bug.cgi?id=775369
+
+2016-11-29 15:30:43 +0100 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
+
+ * gst/tcp/gstmultihandlesink.c:
+ multihandlesink: Fix buffers-queued being off by one
+ max_buffer_usage is the index of the oldest buffer in the queue,
+ starting at zero, not the number of buffers queued.
+ find_limits returns the index of the oldest buffer that satisfies the
+ limits in its min_idx parameter, not the number of buffers needed. Fix
+ this use too in order to keep passing the tests that read
+ buffers-queued.
+ https://bugzilla.gnome.org/show_bug.cgi?id=775351
+
+2016-11-29 16:26:22 +0100 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
+
+ * tests/check/elements/multifdsink.c:
+ multifdsink: Add a test involving a slow client
+ https://bugzilla.gnome.org/show_bug.cgi?id=774908
+
+2016-11-23 14:35:04 +0100 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
+
+ * gst/tcp/gstmultihandlesink.c:
+ multihandlesink: Update bufpos in a separate pass
+ If a client gets dropped and the iteration gets restarted, bufpos is
+ incremented again for all clients that preceded the dropped one, causing
+ havoc.
+ Adjust the bufpos for all clients first before trying to drop any.
+ https://bugzilla.gnome.org/show_bug.cgi?id=774908
+
+2016-11-29 16:37:50 +0530 Garima Gaur <garima.g@samsung.com>
+
+ * gst/playback/gstplaybin2.c:
+ playbin: Fix caps memory leak in usage of gst_static_caps_get() API
+ https://bugzilla.gnome.org/show_bug.cgi?id=775310
+
+2016-11-28 20:25:35 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * win32/common/libgstaudio.def:
+ win32: update .def file for new audioconverter API
+ Fixes distcheck.
+
+2016-11-28 18:28:24 -0800 Scott D Phillips <scott.d.phillips@intel.com>
+
+ * meson.build:
+ meson: Add headers and libm to has_function checks
+ The functions from math.h may be implemented in libm.
+ https://bugzilla.gnome.org/show_bug.cgi?id=774876
+
+2016-11-28 19:45:46 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/pbutils/gstdiscoverer.c:
+ discoverer: Handle NULL/ANY/EMPTY caps without crashing
+
+2016-11-28 16:54:55 +0100 Edward Hervey <bilboed@bilboed.com>
+
+ * tests/check/elements/videorate.c:
+ check/videorate: Avoid leaking extra buffers
+
+2016-11-28 16:53:10 +0100 Edward Hervey <edward@centricular.com>
+
+ * gst-libs/gst/video/video-info.c:
+ video-info: Properly initialize/set extra fields
+ The flags and field order weren't properly initialized in the
+ gst_video_info_init().
+ Furthermore in gst_video_info_from_caps() we might set unitiliazed
+ values previously, this only sets them if valid.
+
+2016-11-28 16:51:43 +0100 Edward Hervey <edward@centricular.com>
+
+ * gst-libs/gst/sdp/gstsdpmessage.c:
+ sdp: Fix attribute leak
+ We need to free the strdup'd string (to_free) in all cases
+
+2016-11-28 16:51:23 +0100 Edward Hervey <edward@centricular.com>
+
+ * gst-libs/gst/rtsp/gstrtspmessage.c:
+ rtsp: Don't leak authorization string
+
+2016-10-19 12:21:37 +0200 Petr Kulhavy <brain@jikos.cz>
+
+ * gst-libs/gst/audio/audio-converter.c:
+ * gst-libs/gst/audio/audio-converter.h:
+ * gst/audioconvert/gstaudioconvert.c:
+ audio-converter: optimize endian conversion
+ Optimize LE<->BE conversion by adding a dedicated fast path instead of
+ using the generic converter. Implement transform_ip function in order to do the
+ endian swap in place.
+ This saves buffer allocation for the intermediate format, can be done in place
+ and also performs the conversion in one step instead of unpack-convert-pack.
+ For all bit widths the naive algorithm is implemented, which provides the best
+ performance when compiled with -O3. ORC was considered but eventually removed
+ as it requires a dedicated function for in-place conversion (due to the
+ "restrict" parameters).
+ A more complex algorithm for the 24-bit conversion with unrolled loop and
+ 32-bit processing is implemented in the #if 0 section. It performs better if
+ compiled with -O2. With -O3 however the naive algorithm performs better.
+ https://bugzilla.gnome.org/show_bug.cgi?id=773073
+
+2016-10-21 14:30:31 +0200 Petr Kulhavy <brain@jikos.cz>
+
+ * gst-libs/gst/audio/audio-converter.c:
+ audio-convert: simplify the chain free process
+ It is not needed to store a pointer to every single chain element to free it.
+ Instead walk the channel list backwards and free the chain elements one by one.
+ Rename GstAudioConverter->chain_pack to chain_end.
+ https://bugzilla.gnome.org/show_bug.cgi?id=773073
+
+2016-11-28 17:12:26 +0530 Garima Gaur <garima.g@samsung.com>
+
+ * gst/playback/gstsubtitleoverlay.c:
+ subtitleoverlay: Fix caps memory leak when failing to get sinkpad from subtitle renderer
+ https://bugzilla.gnome.org/show_bug.cgi?id=775224
+
+2016-11-28 10:12:49 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/pbutils/gstdiscoverer.c:
+ discoverer: Extract video information from caps manually without GstVideoInfo
+ The caps might not be fixated (which is required by GstVideoInfo) and we
+ would assert otherwise. However the caps often contain useful
+ information in the already-fixed parts that we can use here.
+
+2016-11-28 10:04:38 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/pbutils/gstdiscoverer.c:
+ discoverer: Also stop waiting for subtitles if we get EOS
+ We're not going to get a buffer or GAP event anymore after EOS and would
+ wait forever otherwise.
+
+2016-11-26 13:53:49 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/riff/riff-media.c:
+ riff-media: Check if caps are NULL before using them for the first time, not afterwards
+ Otherwise we'll get a g_critical() before erroring out cleanly on
+ https://samples.mplayerhq.hu/A-codecs/ATRAC3/SND0.AT3
+
+2016-11-26 11:20:51 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * .gitmodules:
+ common: use https protocol for common submodule
+ https://bugzilla.gnome.org/show_bug.cgi?id=775110
+
+2016-11-25 10:48:06 +0100 Miguel Paris <mparisparis@gmail.com>
+
+ * gst-libs/gst/rtp/gstrtpbuffer.c:
+ rtpbuffer: Fix ensure_buffers() if whole packet is in one GstMemory
+ When gst_rtp_buffer_add_extension_onebyte_header() is used over a
+ GstRtpBuffer that only contains a memory for the whole packet,
+ ensure_buffers function crashes at the next point:
+ mem = gst_memory_copy (rtp->map[i].memory, offset, rtp->size[i]);
+ when i==2 because the payload is not mapped.
+ In addition the offset is calculated subtracting in the wrong direction.
+ https://bugzilla.gnome.org/show_bug.cgi?id=774959
+
+2016-11-24 15:40:22 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/video/video-info.c:
+ * tests/check/libs/video.c:
+ video-info: Add unit test for overflow checks
+ And also prevent overflows caused by allowing uint width/height in
+ gst_video_info_set_format() but storing them as (signed!) ints.
+
+2016-11-24 15:12:40 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/video/video-info.c:
+ video-info: And change the overflow check to not actually overflow itself
+
+2016-11-23 20:10:34 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/video/gstvideodecoder.c:
+ * gst-libs/gst/video/gstvideoencoder.c:
+ * gst-libs/gst/video/gstvideometa.c:
+ * gst-libs/gst/video/gstvideopool.c:
+ * gst-libs/gst/video/video-blend.c:
+ * gst-libs/gst/video/video-overlay-composition.c:
+ video: Handle errors in gst_video_info_set_format() / gst_video_info_align()
+ https://bugzilla.gnome.org/show_bug.cgi?id=774588
+
+2016-11-23 20:00:19 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/video/video-info.c:
+ * gst-libs/gst/video/video-info.h:
+ video-info: Sanity check the frame size to prevent overflows
+ https://bugzilla.gnome.org/show_bug.cgi?id=774588
+
+2016-11-23 13:48:06 +0100 Ulf Olsson <ulfo@axis.com>
+
+ * gst-libs/gst/sdp/gstmikey.c:
+ mikey: Generate the correct SRTP policy
+ https://bugzilla.gnome.org/show_bug.cgi?id=774911
+
+2016-11-23 18:26:29 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/rtsp/gstrtspdefs.c:
+ rtspdefs: Assert on the excepted MD5 digest string length
+ CID 1394494.
+
+2016-11-23 21:27:55 +1100 Matthew Waters <matthew@centricular.com>
+
+ * gst/typefind/gsttypefindfunctions.c:
+ typefind: bounds check windows ico detection
+ Fixes out of bounds read
+ https://bugzilla.gnome.org/show_bug.cgi?id=774902
+
+2016-11-22 21:12:23 -0800 Scott D Phillips <scott.d.phillips@intel.com>
+
+ * gst-libs/gst/tag/mklicensestables.c:
+ tag: fix some warnings in mklicensestables
+ https://bugzilla.gnome.org/show_bug.cgi?id=774878
+
+2016-10-07 15:08:37 +0100 Julien Isorce <j.isorce@samsung.com>
+
+ * gst-libs/gst/allocators/gstfdmemory.c:
+ gstfdmemory: log with GST_INFO instead of GST_ERROR on permission denied
+ For example mmap can fail with EACCES if the the fd has been open
+ with read only mode. And mapping the memory might be the only way
+ to check that. So no need to print out an error.
+ Ex: ioctl(dev, DRM_IOCTL_PRIME_HANDLE_TO_FD, flags & ~DRM_RDWR)
+ https://bugzilla.gnome.org/show_bug.cgi?id=765600
+
+2016-10-18 16:18:19 -0700 Reynaldo H. Verdejo Pinochet <reynaldo@osg.samsung.com>
+
+ * gst/typefind/gsttypefindfunctions.c:
+ typefind: add typefinder for Apple/iTunes itc artwork files
+ Avoids audio/mpeg false-positive described at:
+ https://bugzilla.gnome.org/show_bug.cgi?id=773172
+
+2016-11-18 16:51:26 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * docs/libs/gst-plugins-base-libs-sections.txt:
+ * gst-libs/gst/rtsp/gstrtspmessage.c:
+ * gst-libs/gst/rtsp/gstrtspmessage.h:
+ * tests/check/libs/rtsp.c:
+ * win32/common/libgstrtsp.def:
+ rtsp: Add gst_rtsp_message_parse_auth_credentials() to parse authentication credentials
+ https://bugzilla.gnome.org/show_bug.cgi?id=774416
+
+2016-11-18 13:20:55 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * docs/libs/gst-plugins-base-libs-sections.txt:
+ * gst-libs/gst/rtsp/gstrtspconnection.c:
+ * gst-libs/gst/rtsp/gstrtspdefs.c:
+ * gst-libs/gst/rtsp/gstrtspdefs.h:
+ * win32/common/libgstrtsp.def:
+ rtsp: Add gst_rtsp_generate_digest_auth_response() to calculate digest auth response
+ https://bugzilla.gnome.org/show_bug.cgi?id=774416
+
+2016-11-20 15:43:42 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * .gitignore:
+ * Makefile.am:
+ * configure.ac:
+ * win32/MANIFEST:
+ * win32/common/_stdint.h:
+ * win32/common/audio-enumtypes.c:
+ * win32/common/audio-enumtypes.h:
+ * win32/common/config.h:
+ * win32/common/gstrtsp-enumtypes.c:
+ * win32/common/gstrtsp-enumtypes.h:
+ * win32/common/multichannel-enumtypes.c:
+ * win32/common/multichannel-enumtypes.h:
+ * win32/common/pbutils-enumtypes.c:
+ * win32/common/pbutils-enumtypes.h:
+ * win32/common/video-enumtypes.c:
+ * win32/common/video-enumtypes.h:
+ win32: remove copies of generated headers
+
+2016-11-18 14:51:29 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * gst-libs/gst/allocators/gstdmabuf.h:
+ dmabuf-allocator: Add missing padding in the class
+ This class was made subclassable, though for future growth of the code,
+ it's better if we have some room for add class members. Using the small
+ padding since this is unlikely.
+
+2016-11-17 20:18:55 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/pango/gstbasetextoverlay.c:
+ textoverlay: Mark pad as needing reconfiguration again if it failed
+ And return FLUSHING instead of NOT_NEGOTIATED on flushing pads.
+ https://bugzilla.gnome.org/show_bug.cgi?id=774623
+
+2016-11-17 19:46:54 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/rtp/gstrtpbasepayload.c:
+ rtpbasepayload: Ensure to set the RECONFIGURE flag again if reconfiguration failed
+ https://bugzilla.gnome.org/show_bug.cgi?id=774623
+
+2016-11-17 16:45:32 -0800 Scott D Phillips <scott.d.phillips@intel.com>
+
+ * meson.build:
+ meson: add_global_arguments -> add_project_arguments
+ https://bugzilla.gnome.org/show_bug.cgi?id=774656
+
+2016-11-17 10:16:43 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * tests/check/libs/videotimecode.c:
+ videotimecode: Add test for the calculations of distance from the daily jam
+ https://bugzilla.gnome.org/show_bug.cgi?id=774585
+
+2016-11-16 19:13:14 +0200 Vivia Nikolaidou <vivia@ahiru.eu>
+
+ * gst-libs/gst/video/gstvideotimecode.c:
+ videotimecode: Fix incorrect nsec_since_daily_jam calculation
+ For drop-frame timecodes, the nsec_since_daily_jam doesn't necessarily
+ directly correspond to this many hours/minutes/seconds/frames. We have
+ to get the frame count as per frames_since_daily_jam and then convert.
+ https://bugzilla.gnome.org/show_bug.cgi?id=774585
+
+2016-11-16 20:48:28 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/riff/riff-media.c:
+ riff: Extract bpp from the strf for vnmc
+ Needed for avdec_vnmc to work.
+
+2016-11-17 00:40:43 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst/playback/gstplaysink.c:
+ playsink: warn if a custom sink is set that has no 'sink' pad
+
+2016-11-15 09:32:24 -0800 Scott D Phillips <scott.d.phillips@intel.com>
+
+ * gst-libs/gst/audio/gstaudiodecoder.c:
+ * gst-libs/gst/video/gstvideodecoder.c:
+ videodecoder, audiodecoder: parse format before checking in src_query_default
+ The logic change in these commits misordered the parsing and checking of
+ format in position queries:
+ 2b06e54 videodecoder: Don't answer BYTES queries
+ 1840b02 audio: Don't answer BYTES queries
+ https://bugzilla.gnome.org/show_bug.cgi?id=774484
+
+2016-11-15 18:32:50 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst-libs/gst/app/gstappsink.c:
+ * gst-libs/gst/app/gstappsink.h:
+ appsink: fix g-i warnings and add since markers
+ Rename function parameter and make sure the name in the
+ declaration matches the name in the implementation, to
+ avoid g-i warnings. Also add Since markers for gtk-doc.
+ gstappsink.c:1248: Warning: GstApp: gst_app_sink_set_buffer_list_support:
+ unknown parameter 'buffer_list' in documentation comment, should be 'drop'
+
+2016-11-15 15:12:12 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/pbutils/gstdiscoverer.c:
+ discoverer: Do not try to unref the bus if it has not been set yet
+ It might happen if creation of the discoverer failed
+
+2016-07-04 09:32:28 +0200 Patricia Muscalu <patricia@axis.com>
+
+ * gst-libs/gst/app/gstappsink.c:
+ * gst-libs/gst/app/gstappsink.h:
+ * tests/check/elements/appsink.c:
+ * win32/common/libgstapp.def:
+ appsink: add support for buffer lists
+ https://bugzilla.gnome.org/show_bug.cgi?id=752363
+
+2016-11-15 15:23:20 +0900 Wonchul Lee <wonchul.lee@collabora.com>
+
+ * gst/playback/gstplaybin3.c:
+ playbin3: remove dead code
+ It never reach into this code path, custom_combiner always not null
+ here.
+ https://bugzilla.gnome.org/show_bug.cgi?id=774454
+
+2016-11-15 23:36:41 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst-libs/gst/video/gstvideodecoder.c:
+ videodecoder: Don't answer BYTES queries
+ Refuse to answer BYTES queries ourselves. The only
+ time they make sense is on raw elementary streams,
+ in which case upstream would already have answered.
+ https://bugzilla.gnome.org/show_bug.cgi?id=757631
+
+2016-11-15 23:27:17 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst-libs/gst/audio/gstaudiodecoder.c:
+ * gst-libs/gst/audio/gstaudioencoder.c:
+ audio: Don't answer BYTES queries
+ Refuse to answer BYTES queries ourselves. The only
+ time they make sense is on raw elementary streams,
+ in which case upstream would already have answered.
+ They especially don't make sense for encoders to answer
+ based on upstream values - although perhaps later
+ we could make it do TIME->BYTES conversion on the source
+ pad based on bitrate.
+ https://bugzilla.gnome.org/show_bug.cgi?id=757631
+
+2016-11-14 16:55:36 -0800 Scott D Phillips <scott.d.phillips@intel.com>
+
+ * gst-libs/gst/sdp/gstsdpmessage.c:
+ sdp: cast away const in call to g_free
+ MSVC warns about the const here. It's safe to cast away.
+ https://bugzilla.gnome.org/show_bug.cgi?id=774293
+
+2016-11-14 16:48:16 -0800 Scott D Phillips <scott.d.phillips@intel.com>
+
+ * gst-libs/gst/audio/gstaudiometa.c:
+ * gst-libs/gst/video/gstvideoaffinetransformationmeta.c:
+ * gst-libs/gst/video/gstvideometa.c:
+ * gst-libs/gst/video/video-overlay-composition.c:
+ Cast away const from GstMetaInfo in *_get_meta_info() functions
+ MSVC warns about the const in the implicit argument conversion in the
+ calls to g_once_init_{enter,leave}. It's OK so explicitly cast it.
+ https://bugzilla.gnome.org/show_bug.cgi?id=774293
+
+2016-11-13 13:15:38 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gstdecodebin3-parse.c:
+ decodebin3: Clear saw_eos flag of DecodebinInputStream by FLUSH event
+ Likewise how GstPad is doing, saw_eos flag of DecodebinInputStream
+ must be cleared by FLUSH event.
+ https://bugzilla.gnome.org/show_bug.cgi?id=774343
+
+2016-10-17 15:38:37 +0900 Wonchul Lee <wonchul.lee@collabora.com>
+
+ * gst/playback/gstplaybin3.c:
+ playbin3: Fix deadlock when adding multiple parsebin
+ https://bugzilla.gnome.org/show_bug.cgi?id=773131
+
+2016-11-14 11:39:33 -0800 Scott D Phillips <scott.d.phillips@intel.com>
+
+ * ext/vorbis/meson.build:
+ meson: vorbis: Add -DTREMOR to flags for gstivorbisdec
+ Matching the flags set by Makefile.am
+ https://bugzilla.gnome.org/show_bug.cgi?id=774445
+
+2016-11-14 16:28:42 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/audio/meson.build:
+ * gst-libs/gst/video/meson.build:
+ * gst/adder/meson.build:
+ * gst/videotestsrc/meson.build:
+ * gst/volume/meson.build:
+ meson: Fix build when orc is disabled
+ Making sure not to use the orc_dep variable in case
+ orc has been explicitely disabled.
+
+2016-11-11 10:38:58 -0800 Scott D Phillips <scott.d.phillips@intel.com>
+
+ * gst-libs/gst/video/video-info.c:
+ * gst/playback/gstplaybin2.c:
+ * gst/playback/gstplaybin3.c:
+ Use intermediate guint when handling GstVideoMultiviewFlags
+ The underlying integer type of the enum GstVideoMultiviewFlags is
+ implementation defined and may not have the same size as guint.
+ https://bugzilla.gnome.org/show_bug.cgi?id=774293
+
+2016-11-11 10:35:00 -0800 Scott D Phillips <scott.d.phillips@intel.com>
+
+ * ext/ogg/gstoggstream.c:
+ * gst-libs/gst/video/gstvideotimecode.c:
+ Remove 'return' from `void` functions
+ https://bugzilla.gnome.org/show_bug.cgi?id=774293
+
+2016-10-26 22:37:19 -0700 Scott D Phillips <scott.d.phillips@intel.com>
+
+ * meson.build:
+ meson: don't add_global_arguments when being built as a subproject
+ https://bugzilla.gnome.org/show_bug.cgi?id=773568
+
+2016-11-10 17:05:19 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/meson.build:
+ * gst-libs/gst/rtsp/Makefile.am:
+ * gst-libs/gst/rtsp/meson.build:
+ rtsp: Include GstSdp-1.0.gir when generating the gir
+ It is actually needed as we need some symbols. We do not link
+ to libgstsdp as the user of the lib should do it (same with
+ autotools build).
+ This reverts previous commit
+
+2016-11-10 16:36:49 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/rtsp/Makefile.am:
+ libs:rtsp: Remove wrong dependency on Sdp for the gir file
+
+2016-11-10 16:36:49 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/rtsp/Makefile.am:
+ * gst-libs/gst/rtsp/meson.build:
+ libs:rtsp: Remove wrong dependency on Sdp for the gir file
+
+2016-10-20 17:17:27 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * gst-libs/gst/allocators/meson.build:
+ * gst-libs/gst/app/meson.build:
+ * gst-libs/gst/audio/meson.build:
+ * gst-libs/gst/fft/meson.build:
+ * gst-libs/gst/pbutils/meson.build:
+ * gst-libs/gst/riff/meson.build:
+ * gst-libs/gst/rtp/meson.build:
+ * gst-libs/gst/rtsp/meson.build:
+ * gst-libs/gst/sdp/meson.build:
+ * gst-libs/gst/tag/meson.build:
+ * gst-libs/gst/video/meson.build:
+ * meson.build:
+ * meson_options.txt:
+ meson: Generate girs
+ https://bugzilla.gnome.org/show_bug.cgi?id=773944
+
+2016-11-07 12:01:16 +0100 Petr Kulhavy <brain@jikos.cz>
+
+ * gst-libs/gst/audio/audio-channels.c:
+ audio-channels: map buffer read-write only if channels differ
+ gst_audio_buffer_reorder_channels() was always mapping the buffer read-write
+ regardless whether any reordering was needed. If the from and to channel order
+ is identical return immediately without remapping the buffer.
+ Add a small helper function gst_audio_channel_positions_equal() which is used
+ in both gst_audio_reorder_channels() and gst_audio_buffer_reorder_channels().
+ https://bugzilla.gnome.org/show_bug.cgi?id=773833
+
+2013-09-17 17:42:05 +0200 Joris Valette <joris.valette@gmail.com>
+
+ * gst/videorate/gstvideorate.c:
+ * gst/videorate/gstvideorate.h:
+ * tests/check/elements/videorate.c:
+ videorate: Add fixed rate property
+ https://bugzilla.gnome.org/show_bug.cgi?id=699077
+
+2016-11-04 16:41:05 +0000 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * ext/opus/gstopusdec.c:
+ opusdec: fix 120 ms buffers being wrongly emitted
+ Using the max 120 ms buffer size to ensure we have enough space
+ for decoded data meant that Opus could actually return 120 ms'
+ worth of data.
+ https://bugzilla.gnome.org/show_bug.cgi?id=771723
+
+2016-11-04 18:55:44 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * win32/common/libgstvideo.def:
+ win32: Update exports for new API
+
+2016-10-14 15:14:14 +0100 Julien Isorce <j.isorce@samsung.com>
+
+ * docs/libs/gst-plugins-base-libs-sections.txt:
+ * gst-libs/gst/video/gstvideodecoder.c:
+ * gst-libs/gst/video/gstvideodecoder.h:
+ video: add gst_video_decoder_allocate_output_frame_with_params
+ It adds a third argument to pass GstBufferPoolAcquireParams
+ to gst_buffer_pool_acquire_buffer.
+ If a user subclasses GstBufferPoolAcquireParams, this allows to
+ pass an updated param to the underlying buffer pool at each
+ gst_video_decoder_allocate_output_frame_with_params call.
+ https://bugzilla.gnome.org/show_bug.cgi?id=773165
+
+2016-11-04 16:25:55 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/video/video-info.h:
+ video-info: Fix the docs to say interlace-mode, not interlaced-mode
+
+2016-11-03 21:34:45 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * win32/common/libgstallocators.def:
+ win32: add new API to .def file
+ Fixes make check and make distcheck
+
+2015-12-11 17:05:14 +0000 Julien Isorce <j.isorce@samsung.com>
+
+ * docs/libs/gst-plugins-base-libs-sections.txt:
+ * gst-libs/gst/allocators/gstdmabuf.h:
+ allocators: define GST_CAPS_FEATURE_MEMORY_DMABUF
+ Adds "memory:DMABuf" caps feature. Since 1.11 tag.
+ Useful when the the dma-buf buffer cannot be mapped to CPU for r/w requests.
+ Example: protected content or platform constraints.
+ https://bugzilla.gnome.org/show_bug.cgi?id=759358
+
+2016-10-24 11:00:07 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * docs/libs/gst-plugins-base-libs-sections.txt:
+ * gst-libs/gst/allocators/gstdmabuf.c:
+ * gst-libs/gst/allocators/gstdmabuf.h:
+ dmabuf: Make the allocator sub-classable
+ This should allos for cleaner code when implement such allocator.
+ https://bugzilla.gnome.org/show_bug.cgi?id=768794
+
+2014-11-27 13:52:52 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * gst-libs/gst/audio/gstaudiosrc.c:
+ audiosrc: Leave read loop if no longer running
+ In the case a src stops providing data (read calls returns 0). The audio
+ src thread will never leave. Instead, check the condition and leave the
+ loop.
+
+2016-11-03 17:18:05 +0100 Edward Hervey <edward@centricular.com>
+
+ * tests/check/elements/videoscale.c:
+ check: Fix corrupted xml check files
+ By making sure each different videoscale check instance gets logged
+ into different output file
+
+2016-11-02 11:04:32 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/video/video-orc-dist.c:
+ * gst-libs/gst/video/video-orc-dist.h:
+ video: Update orc generated files
+
+2016-11-02 11:03:42 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/meson.build:
+ * gst/pbtypes/meson.build:
+ meson: Add pbtypes plugin
+
+2015-05-28 22:50:05 +1000 Jan Schmidt <jan@centricular.com>
+
+ * configure.ac:
+ * gst/Makefile.am:
+ * gst/pbtypes/Makefile.am:
+ * gst/pbtypes/gstpbtypes.c:
+ pbtypes: Add a stub plugin that owns the plugins-base dynamic types
+ https://bugzilla.gnome.org/show_bug.cgi?id=750079
+
+2016-10-07 16:20:24 +0900 Changbok Chea <changbok.chea@gmail.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Fix adaptive demuxer's property checking and buffering setting
+ - Add adaptive demuxer's 'connection-speed' property checking
+ - Set adaptive demuxer q2 buffering property via urisrc use_buffering value
+ https://bugzilla.gnome.org/show_bug.cgi?id=772550
+
+2016-11-01 23:51:47 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/video/video-color.c:
+ * gst-libs/gst/video/video-color.h:
+ * gst-libs/gst/video/video-info.c:
+ Revert "video-color: Allow converting incomplete colorimetry to a string"
+ This reverts commit 158eae7e7e3da3545712dd7d6121492c53085fd9.
+ It already *always* allowed to convert incomplete colorimetry to a
+ string.
+
+2016-05-02 09:48:09 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/rtp/gstrtpbasedepayload.c:
+ rtpbasedepayload: Reject non-TIME segments
+ https://bugzilla.gnome.org/show_bug.cgi?id=765796
+
+2016-11-01 21:09:04 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/rtp/gstrtpbasedepayload.c:
+ Revert "basertpdepayload: create valid segment when given non-time segment"
+ This reverts commit 0f609bc6c67fea294f4556627228fed72a74d0fb.
+
+2016-09-30 15:03:52 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/video/video-color.c:
+ * gst-libs/gst/video/video-color.h:
+ * gst-libs/gst/video/video-info.c:
+ video-color: Allow converting incomplete colorimetry to a string
+ This is only a good idea for non-raw caps.
+ https://bugzilla.gnome.org/show_bug.cgi?id=771376
+
+2016-09-29 14:57:02 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/video/gstvideoencoder.c:
+ videoencoder: Proxy colorimetry and chroma-site from input to output caps
+ https://bugzilla.gnome.org/show_bug.cgi?id=771376
+
+2016-09-29 14:48:29 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/video/gstvideodecoder.c:
+ videodecoder: Proxy field order to the output caps
+ https://bugzilla.gnome.org/show_bug.cgi?id=771376
+
+2016-09-29 14:48:00 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/gst/video/gstvideoencoder.c:
+ videoencoder: Proxy interlace-mode and field-order fields from the input to the output caps
+ https://bugzilla.gnome.org/show_bug.cgi?id=771376
+
+2016-09-29 14:36:42 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * docs/libs/gst-plugins-base-libs-sections.txt:
+ * gst-libs/gst/video/video-info.c:
+ * gst-libs/gst/video/video-info.h:
+ * gst-libs/gst/video/videoorientation.c:
+ * win32/common/libgstvideo.def:
+ video-info: Add optional field-order caps field for interlaced-mode=interleaved
+ Usually this information is static for the whole stream, and various
+ container formats store this information inside the headers for the
+ whole stream.
+ Having it inside the caps for these cases simplifies code and makes it
+ possible to express these requirements more explicitly with the caps.
+ https://bugzilla.gnome.org/show_bug.cgi?id=771376
+
+2016-11-01 18:08:45 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * meson.build:
+ meson: update version
+
+2016-10-22 11:08:18 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Remove trailing whitespace
+ https://bugzilla.gnome.org/show_bug.cgi?id=773341
+
+2016-10-14 15:18:28 +0200 Stian Selnes <stian@pexip.com>
+
+ * gst/videotestsrc/gstvideotestsrc.c:
+ * gst/videotestsrc/gstvideotestsrc.h:
+ * gst/videotestsrc/videotestsrc.c:
+ * tests/check/elements/videotestsrc.c:
+ videotestsrc: Make snow deterministic
+ Deterministic generation of snow and smpte is important for tests so
+ that it's not affected by other videotestsrc elements in current or
+ possibly previous tests.
+ https://bugzilla.gnome.org/show_bug.cgi?id=773102
+
+2016-10-14 22:31:41 +0200 Petr Kulhavy <brain@jikos.cz>
+
+ * gst/audioconvert/gstaudioconvert.c:
+ audioconvert: optimize mask calculation
+ find_suitable_mask() had complexity O(n^2) on the number of bits.
+ For common case like 2-channel audio the mask was calculated in about 4k loop
+ cycles.
+ Optimize both n_bits_set() and find_suitable_mask() to O(n) where n is the
+ number of bits set in the mask.
+ https://bugzilla.gnome.org/show_bug.cgi?id=772864
+
+2016-10-13 10:12:10 +0900 hoonhee.lee <hoonhee.lee@lge.com>
+
+ * gst/playback/gstparsebin.c:
+ parsebin: Rename variables include 'decode' to 'parse'
+ https://bugzilla.gnome.org/show_bug.cgi?id=772832
+
+2016-10-31 16:33:41 +0900 Wonchul Lee <wonchul.lee@collabora.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Fix GST_TYPE_URI_SOURCE_BIN macro typo
+ https://bugzilla.gnome.org/show_bug.cgi?id=772445
+
+2016-10-03 17:12:29 +0900 Wonchul Lee <wonchul.lee@collabora.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: fix to log event pointer
+ https://bugzilla.gnome.org/show_bug.cgi?id=772445
+
+2016-09-28 16:13:46 +0900 Wonchul Lee <wonchul.lee@collabora.com>
+
+ * gst/playback/gsturisourcebin.c:
+ urisourcebin: Make use of adaptive demuxer variable
+ https://bugzilla.gnome.org/show_bug.cgi?id=772445
+
+2016-10-06 11:44:11 +0100 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * ext/opus/gstopusdec.c:
+ opusdec: interpret zero duration as unknown
+ This fixes missing audio when we get buffers with zero
+ duration, denoting unknown duration. When several such
+ buffers are received in a row, they're all at the same
+ timestamp, with zero duration.
+ https://bugzilla.gnome.org/show_bug.cgi?id=771723
+
+2016-09-26 10:50:52 +0100 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * ext/opus/gstopusdec.c:
+ opusdec: fix "buffer too small" error
+ Always supply a buffer with max size to the decoder, as we
+ can't really decide how many samples will be in the lost packet
+ based on the timestamps we get.
+ https://bugzilla.gnome.org/show_bug.cgi?id=771723
+
+2016-10-28 08:47:40 +0200 Tomasz Zajac <tomasz.zajac@motorolasolutions.com>
+
+ * tests/check/libs/sdp.c:
+ sdp: Add tests for rtcp-fb parsing
+ https://bugzilla.gnome.org/show_bug.cgi?id=769698
+
+2016-10-28 08:47:01 +0200 Tomasz Zajac <tomasz.zajac@motorolasolutions.com>
+
+ * gst-libs/gst/sdp/gstsdpmessage.c:
+ sdp: Parse rtcp-fb media attributes
+ https://bugzilla.gnome.org/show_bug.cgi?id=769698
+
+2016-08-10 11:38:58 +0200 Tomasz Zajac <tomasz.zajac@motorolasolutions.com>
+
+ * gst-libs/gst/sdp/gstsdpmessage.c:
+ sdp: Add rtcp-fb media attributes based on caps
+ https://bugzilla.gnome.org/show_bug.cgi?id=769698
+
+2016-09-07 15:01:13 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * ext/pango/gstbasetextoverlay.c:
+ * gst-libs/gst/video/video-converter.c:
+ * gst-libs/gst/video/video-format.c:
+ * gst-libs/gst/video/video-format.h:
+ * gst-libs/gst/video/video-info.c:
+ * gst-libs/gst/video/video-orc.orc:
+ * tests/check/libs/video.c:
+ video: Add VYUY pixel format
+ This format is sometimes the output of JPEG decoders. It is the same as
+ YUY2 and UYVY but with a different component order.
+ https://bugzilla.gnome.org/show_bug.cgi?id=767450
+
+2015-10-15 12:52:27 +0200 Marcin Kolny <marcin.kolny@gmail.com>
+
+ * gst-libs/gst/audio/gstaudiobasesink.c:
+ * gst-libs/gst/audio/gstaudiobasesrc.c:
+ * gst-libs/gst/audio/gstaudioclock.c:
+ * gst-libs/gst/audio/gstaudioclock.h:
+ audioclock: use GstAudioClock* as first argument in GstAudioClock methods
+ All the GstAudioClock method declarations required object of GstClock type
+ as a first argument, but in fact, required GstAudioClock object (runtime
+ check in function body). Instead of checking type in run-time, we can
+ change functions declaration, to accept only GstAudioClock methods. Then,
+ runtime check is not necessary anymore, since always GstAudioClock object
+ is passed to a function.
+ https://bugzilla.gnome.org/show_bug.cgi?id=756628
+
+=== release 1.11.0 ===
+
+2016-11-01 18:53:15 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * configure.ac:
+ Back to development
+
=== release 1.10.0 ===
-2016-11-01 Sebastian Dröge <slomo@coaxion.net>
+2016-11-01 17:53:24 +0200 Sebastian Dröge <sebastian@centricular.com>
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
* configure.ac:
- releasing 1.10.0
+ * docs/plugins/inspect/plugin-adder.xml:
+ * docs/plugins/inspect/plugin-alsa.xml:
+ * docs/plugins/inspect/plugin-app.xml:
+ * docs/plugins/inspect/plugin-audioconvert.xml:
+ * docs/plugins/inspect/plugin-audiorate.xml:
+ * docs/plugins/inspect/plugin-audioresample.xml:
+ * docs/plugins/inspect/plugin-audiotestsrc.xml:
+ * docs/plugins/inspect/plugin-cdparanoia.xml:
+ * docs/plugins/inspect/plugin-encoding.xml:
+ * docs/plugins/inspect/plugin-gio.xml:
+ * docs/plugins/inspect/plugin-libvisual.xml:
+ * docs/plugins/inspect/plugin-ogg.xml:
+ * docs/plugins/inspect/plugin-opus.xml:
+ * docs/plugins/inspect/plugin-pango.xml:
+ * docs/plugins/inspect/plugin-playback.xml:
+ * docs/plugins/inspect/plugin-subparse.xml:
+ * docs/plugins/inspect/plugin-tcp.xml:
+ * docs/plugins/inspect/plugin-theora.xml:
+ * docs/plugins/inspect/plugin-typefindfunctions.xml:
+ * docs/plugins/inspect/plugin-videoconvert.xml:
+ * docs/plugins/inspect/plugin-videorate.xml:
+ * docs/plugins/inspect/plugin-videoscale.xml:
+ * docs/plugins/inspect/plugin-videotestsrc.xml:
+ * docs/plugins/inspect/plugin-volume.xml:
+ * docs/plugins/inspect/plugin-vorbis.xml:
+ * docs/plugins/inspect/plugin-ximagesink.xml:
+ * docs/plugins/inspect/plugin-xvimagesink.xml:
+ * gst-plugins-base.doap:
+ * win32/common/_stdint.h:
+ * win32/common/config.h:
+ Release 1.10.0
+
+2016-11-01 17:43:45 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/af.po:
+ * po/az.po:
+ * po/bg.po:
+ * po/ca.po:
+ * po/cs.po:
+ * po/da.po:
+ * po/de.po:
+ * po/el.po:
+ * po/en_GB.po:
+ * po/eo.po:
+ * po/es.po:
+ * po/eu.po:
+ * po/fi.po:
+ * po/fr.po:
+ * po/gl.po:
+ * po/hr.po:
+ * po/hu.po:
+ * po/id.po:
+ * po/it.po:
+ * po/ja.po:
+ * po/lt.po:
+ * po/lv.po:
+ * po/nb.po:
+ * po/nl.po:
+ * po/or.po:
+ * po/pl.po:
+ * po/pt_BR.po:
+ * po/ro.po:
+ * po/ru.po:
+ * po/sk.po:
+ * po/sl.po:
+ * po/sq.po:
+ * po/sr.po:
+ * po/sv.po:
+ * po/tr.po:
+ * po/uk.po:
+ * po/vi.po:
+ * po/zh_CN.po:
+ Update .po files
2016-10-25 08:52:52 -0700 Scott D Phillips <scott.d.phillips@intel.com>
-# GStreamer 1.10 Release Notes
-
-**GStreamer 1.10.0 was released on 1st November 2016.**
-
-The GStreamer team is proud to announce a new major feature release in the
-stable 1.x API series of your favourite cross-platform multimedia framework!
-
-As always, this release is again packed with new features, bug fixes and other
-improvements.
-
-See [https://gstreamer.freedesktop.org/releases/1.10/][latest] for the latest
-version of this document.
-
-*Last updated: Tuesday 1 Nov 2016, 15:00 UTC [(log)][gitlog]*
-
-[latest]: https://gstreamer.freedesktop.org/releases/1.10/
-[gitlog]: https://cgit.freedesktop.org/gstreamer/www/log/src/htdocs/releases/1.10/release-notes-1.10.md
-
-## Introduction
-
-The GStreamer team is proud to announce a new major feature release in the
-stable 1.x API series of your favourite cross-platform multimedia framework!
-
-As always, this release is again packed with new features, bug fixes and other
-improvements.
-
-## Highlights
-
-- Several convenience APIs have been added to make developers' lives easier
-- A new `GstStream` API provides applications a more meaningful view of the
- structure of streams, simplifying the process of dealing with media in
- complex container formats
-- Experimental `decodebin3` and `playbin3` elements which bring a number of
- improvements which were hard to implement within `decodebin` and `playbin`
-- A new `parsebin` element to automatically unpack and parse a stream, stopping
- just short of decoding
-- Experimental new `meson`-based build system, bringing faster build and much
- better Windows support (including for building with Visual Studio)
-- A new `gst-docs` module has been created, and we are in the process of moving
- our documentation to a markdown-based format for easier maintenance and
- updates
-- A new `gst-examples` module has been create, which contains example
- GStreamer applications and is expected to grow with many more examples in
- the future
-- Various OpenGL and OpenGL|ES-related fixes and improvements for greater
- efficiency on desktop and mobile platforms, and Vulkan support on Wayland was
- also added
-- Extensive improvements to the VAAPI plugins for improved robustness and
- efficiency
-- Lots of fixes and improvements across the board, spanning RTP/RTSP, V4L2,
- Bluetooth, audio conversion, echo cancellation, and more!
-
-## Major new features and changes
-
-### Noteworthy new API, features and other changes
-
-#### Core API additions
-
-##### Receive property change notifications via bus messages
-
-New API was added to receive element property change notifications via
-bus messages. So far, applications had to connect a callback to an element's
-`notify::property-name` signal via the GObject API, which was inconvenient for
-at least two reasons: one had to implement a signal callback function, and that
-callback function would usually be called from one of the streaming threads, so
-one had to marshal (send) any information gathered or pending requests to the
-main application thread which was tedious and error-prone.
-
-Enter [`gst_element_add_property_notify_watch()`][notify-watch] and
-[`gst_element_add_property_deep_notify_watch()`][deep-notify-watch] which will
-watch for changes of a property on the specified element, either only for this
-element or recursively for a whole bin or pipeline. Whenever such a
-property change happens, a `GST_MESSAGE_PROPERTY_NOTIFY` message will be posted
-on the pipeline bus with details of the element, the property and the new
-property value, all of which can be retrieved later from the message in the
-application via [`gst_message_parse_property_notify()`][parse-notify]. Unlike
-the GstBus watch functions, this API does not rely on a running GLib main loop.
-
-The above can be used to be notified asynchronously of caps changes in the
-pipeline, or volume changes on an audio sink element, for example.
-
-[notify-watch]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstElement.html#gst-element-add-property-notify-watch
-[deep-notify-watch]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstElement.html#gst-element-add-property-deep-notify-watch
-[parse-notify]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstMessage.html#gst-message-parse-property-notify
-
-##### GstBin "deep" element-added and element-removed signals
-
-GstBin has gained `"deep-element-added"` and `"deep-element-removed"` signals
-which makes it easier for applications and higher-level plugins to track when
-elements are added or removed from a complex pipeline with multiple sub-bins.
-
-`playbin` makes use of this to implement the new `"element-setup"` signal which
-can be used to configure elements as they are added to `playbin`, just like the
-existing `"source-setup"` signal which can be used to configure the source
-element created.
-
-##### Error messages can contain additional structured details
-
-It is often useful to provide additional, structured information in error,
-warning or info messages for applications (or higher-level elements) to make
-intelligent decisions based on them. To allow this, error, warning and info
-messages now have API for adding arbitrary additional information to them
-using a `GstStructure`:
-[`GST_ELEMENT_ERROR_WITH_DETAILS`][element-error-with-details] and
-corresponding API for the other message types.
-
-This is now used e.g. by the new [`GST_ELEMENT_FLOW_ERROR`][element-flow-error]
-API to include the actual flow error in the error message, and the
-[souphttpsrc element][souphttpsrc-detailed-errors] to provide the HTTP
-status code, and the URL (if any) to which a redirection has happened.
-
-[element-error-with-details]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstElement.html#GST-ELEMENT-ERROR-WITH-DETAILS:CAPS
-[element-flow-error]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstElement.html#GST-ELEMENT-FLOW-ERROR:CAPS
-[souphttpsrc-detailed-errors]: https://cgit.freedesktop.org/gstreamer/gst-plugins-good/tree/ext/soup/gstsouphttpsrc.c?id=60d30db912a1aedd743e66b9dcd2e21d71fbb24f#n1318
-
-##### Redirect messages have official API now
-
-Sometimes, elements need to redirect the current stream URL and tell the
-application to proceed with this new URL, possibly using a different
-protocol too (thus changing the pipeline configuration). Until now, this was
-informally implemented using `ELEMENT` messages on the bus.
-
-Now this has been formalized in the form of a new `GST_MESSAGE_REDIRECT` message.
-A new redirect message can be created using [`gst_message_new_redirect()`][new-redirect].
-If needed, multiple redirect locations can be specified by calling
-[`gst_message_add_redirect_entry()`][add-redirect] to add further redirect
-entries, all with metadata, so the application can decide which is
-most suitable (e.g. depending on the bitrate tags).
-
-[new-redirect]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstMessage.html#gst-message-new-redirect
-[add-redirect]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstMessage.html#gst-message-add-redirect-entry
-
-##### New pad linking convenience functions that automatically create ghost pads
-
-New pad linking convenience functions were added:
-[`gst_pad_link_maybe_ghosting()`][pad-maybe-ghost] and
-[`gst_pad_link_maybe_ghosting_full()`][pad-maybe-ghost-full] which were
-previously internal to GStreamer have now been exposed for general use.
-
-The existing pad link functions will refuse to link pads or elements at
-different levels in the pipeline hierarchy, requiring the developer to
-create ghost pads where necessary. These new utility functions will
-automatically create ghostpads as needed when linking pads at different
-levels of the hierarchy (e.g. from an element inside a bin to one that's at
-the same level in the hierarchy as the bin, or in another bin).
-
-[pad-maybe-ghost]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstPad.html#gst-pad-link-maybe-ghosting
-[pad-maybe-ghost-full]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstPad.html#gst-pad-link-maybe-ghosting-full
-
-##### Miscellaneous
-
-Pad probes: IDLE and BLOCK probes now work slightly differently in pull mode,
-so that push and pull mode have opposite scenarios for idle and blocking probes.
-In push mode, it will block with some data type and IDLE won't have any data.
-In pull mode, it will block _before_ getting a buffer and will be IDLE once some
-data has been obtained. ([commit][commit-pad-probes], [bug][bug-pad-probes])
-
-[commit-pad-probes]: https://cgit.freedesktop.org/gstreamer/gstreamer/commit/gst/gstpad.c?id=368ee8a336d0c868d81fdace54b24431a8b48cbf
-[bug-pad-probes]: https://bugzilla.gnome.org/show_bug.cgi?id=761211
-
-[`gst_parse_launch_full()`][parse-launch-full] can now be made to return a
-`GstBin` instead of a top-level pipeline by passing the new
-`GST_PARSE_FLAG_PLACE_IN_BIN` flag.
-
-[parse-launch-full]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/gstreamer-GstParse.html#gst-parse-launch-full
-
-The default GStreamer debug log handler can now be removed before
-calling `gst_init()`, so that it will never get installed and won't be active
-during initialization.
-
-A new [`STREAM_GROUP_DONE` event][stream-group-done-event] was added. In some
-ways it works similar to the `EOS` event in that it can be used to unblock
-downstream elements which may be waiting for further data, such as for example
-`input-selector`. Unlike `EOS`, further data flow may happen after the
-`STREAM_GROUP_DONE` event though (and without the need to flush the pipeline).
-This is used to unblock input-selector when switching between streams in
-adaptive streaming scenarios (e.g. HLS).
-
-[stream-group-done-event]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstEvent.html#gst-event-new-stream-group-done
-
-The `gst-launch-1.0` command line tool will now print unescaped caps in verbose
-mode (enabled by the -v switch).
-
-[`gst_element_call_async()`][call-async] has been added as convenience API for
-plugin developers. It is useful for one-shot operations that need to be done
-from a thread other than the current streaming thread. It is backed by a
-thread-pool that is shared by all elements.
-
-[call-async]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstElement.html#gst-element-call-async
-
-Various race conditions have been fixed around the `GstPoll` API used by e.g.
-`GstBus` and `GstBufferPool`. Some of these manifested themselves primarily
-on Windows.
-
-`GstAdapter` can now keep track of discontinuities signalled via the `DISCONT`
-buffer flag, and has gained [new API][new-adapter-api] to track PTS, DTS and
-offset at the last discont. This is useful for plugins implementing advanced
-trick mode scenarios.
-
-[new-adapter-api]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer-libs/html/GstAdapter.html#gst-adapter-pts-at-discont
-
-`GstTestClock` gained a new [`"clock-type"` property][clock-type-prop].
-
-[clock-type-prop]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer-libs/html/GstTestClock.html#GstTestClock--clock-type
-
-#### GstStream API for stream announcement and stream selection
-
-New stream listing and stream selection API: new API has been added to
-provide high-level abstractions for streams ([`GstStream`][stream-api])
-and collections of streams ([`GstStreamCollections`][stream-collection-api]).
-
-##### Stream listing
-
-A [`GstStream`][stream-api] contains all the information pertinent to a stream,
-such as stream id, caps, tags, flags and stream type(s); it can represent a
-single elementary stream (e.g. audio, video, subtitles, etc.) or a container
-stream. This will depend on the context. In a decodebin3/playbin3 one
-it will typically be elementary streams that can be selected and unselected.
-
-A [`GstStreamCollection`][stream-collection-api] represents a group of streams
-and is used to announce or publish all available streams. A GstStreamCollection
-is immutable - once created it won't change. If the available streams change,
-e.g. because a new stream appeared or some streams disappeared, a new stream
-collection will be published. This new stream collection may contain streams
-from the previous collection if those streams persist, or completely new ones.
-Stream collections do not yet list all theoretically available streams,
-e.g. other available DVD angles or alternative resolutions/bitrate of the same
-stream in case of adaptive streaming.
-
-New events and messages have been added to notify or update other elements and
-the application about which streams are currently available and/or selected.
-This way, we can easily and seamlessly let the application know whenever the
-available streams change, as happens frequently with digital television streams
-for example. The new system is also more flexible. For example, it is now also
-possible for the application to select multiple streams of the same type
-(e.g. in a transcoding/transmuxing scenario).
-
-A [`STREAM_COLLECTION` message][stream-collection-msg] is posted on the bus
-to inform the parent bin (e.g. `playbin3`, `decodebin3`) and/or the application
-about what streams are available, so you no longer have to hunt for this
-information at different places. The available information includes number of
-streams of each type, caps, tags etc. Bins and/or the application can intercept
-the message synchronously to select and deselect streams before any data is
-produced - for the case where elements such as the demuxers support the new
-stream API, not necessarily in the parsebin compatibility fallback case.
-
-Similarly, there is also a [`STREAM_COLLECTION` event][stream-collection-event]
-to inform downstream elements of the available streams. This event can be used
-by elements to aggregate streams from multiple inputs into one single collection.
-
-The `STREAM_START` event was extended so that it can also contain a GstStream
-object with all information about the current stream, see
-[`gst_event_set_stream()`][event-set-stream] and
-[`gst_event_parse_stream()`][event-parse-stream].
-[`gst_pad_get_stream()`][pad-get-stream] is a new utility function that can be
-used to look up the GstStream from the `STREAM_START` sticky event on a pad.
-
-[stream-api]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/gstreamer-GstStream.html
-[stream-collection-api]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/gstreamer-GstStreamCollection.html
-[stream-collection-msg]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstMessage.html#gst-message-new-stream-collection
-[stream-collection-event]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstEvent.html#gst-event-new-stream-collection
-[event-set-stream]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstEvent.html#gst-event-set-stream
-[event-parse-stream]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstEvent.html#gst-event-parse-stream
-[pad-get-stream]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstPad.html#gst-pad-get-stream
-
-##### Stream selection
-
-Once the available streams have been published, streams can be selected via
-their stream ID using the new `SELECT_STREAMS` event, which can be created
-with [`gst_event_new_select_streams()`][event-select-streams]. The new API
-supports selecting multiple streams per stream type. In the future, we may also
-implement explicit deselection of streams that will never be used, so
-elements can skip these and never expose them or output data for them in the
-first place.
-
-The application is then notified of the currently selected streams via the
-new `STREAMS_SELECTED` message on the pipeline bus, containing both the current
-stream collection as well as the selected streams. This might be posted in
-response to the application sending a `SELECT_STREAMS` event or when
-`decodebin3` or `playbin3` decide on the streams to be initially selected without
-application input.
-
-[event-select-streams]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gstreamer/html/GstEvent.html#gst-event-new-select-streams
-
-##### Further reading
-
-See further below for some notes on the new elements supporting this new
-stream API, namely: `decodebin3`, `playbin3` and `parsebin`.
-
-More information about the new API and the new elements can also be found here:
-
-- GStreamer [stream selection design docs][streams-design]
-- Edward Hervey's talk ["The new streams API: Design and usage"][streams-talk] ([slides][streams-slides])
-- Edward Hervey's talk ["Decodebin3: Dealing with modern playback use cases"][db3-talk] ([slides][db3-slides])
-
-[streams-design]: https://cgit.freedesktop.org/gstreamer/gstreamer/tree/docs/design/part-stream-selection.txt
-[streams-talk]: https://gstconf.ubicast.tv/videos/the-new-gststream-api-design-and-usage/
-[streams-slides]: https://gstreamer.freedesktop.org/data/events/gstreamer-conference/2016/Edward%20Hervey%20-%20The%20New%20Streams%20API%20Design%20and%20Usage.pdf
-[db3-talk]: https://gstconf.ubicast.tv/videos/decodebin3-or-dealing-with-modern-playback-use-cases/
-[db3-slides]: https://gstreamer.freedesktop.org/data/events/gstreamer-conference/2015/Edward%20Hervey%20-%20decodebin3.pdf
-
-#### Audio conversion and resampling API
-
-The audio conversion library received a completely new and rewritten audio
-resampler, complementing the audio conversion routines moved into the audio
-library in the [previous release][release-notes-1.8]. Integrating the resampler
-with the other audio conversion library allows us to implement generic
-conversion much more efficiently, as format conversion and resampling can now
-be done in the same processing loop instead of having to do it in separate
-steps (our element implementations do not make use of this yet though).
-
-The new audio resampler library is a combination of some of the best features
-of other samplers such as ffmpeg, speex and SRC. It natively supports S16, S32,
-F32 and F64 formats and uses optimized x86 and neon assembly for most of its
-processing. It also has support for dynamically changing sample rates by incrementally
-updating the filter tables using linear or cubic interpolation. According to
-some benchmarks, it's one of the fastest and most accurate resamplers around.
-
-The `audioresample` plugin has been ported to the new audio library functions
-to make use of the new resampler.
-
-[release-notes-1.8]: https://gstreamer.freedesktop.org/releases/1.8/
-
-#### Support for SMPTE timecodes
-
-Support for SMPTE timecodes was added to the GStreamer video library. This
-comes with an abstraction for timecodes, [`GstVideoTimeCode`][video-timecode]
-and a [`GstMeta`][video-timecode-meta] that can be placed on video buffers for
-carrying the timecode information for each frame. Additionally there is
-various API for making handling of timecodes easy and to do various
-calculations with them.
-
-A new plugin called [`timecode`][timecode-plugin] was added, that contains an
-element called `timecodestamper` for putting the timecode meta on video frames
-based on counting the frames and another element called `timecodewait` that
-drops all video (and audio) until a specific timecode is reached.
-
-Additionally support was added to the Decklink plugin for including the
-timecode information when sending video out or capturing it via SDI, the
-`qtmux` element is able to write timecode information into the MOV container,
-and the `timeoverlay` element can overlay timecodes on top of the video.
-
-More information can be found in the [talk about timecodes][timecode-talk] at
-the GStreamer Conference 2016.
-
-[video-timecode]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-base-libs/html/gst-plugins-base-libs-gstvideo.html#GstVideoTimeCode
-[video-timecode-meta]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-base-libs/html/gst-plugins-base-libs-gstvideometa.html#gst-buffer-add-video-time-code-meta
-[timecode-plugin]: https://cgit.freedesktop.org/gstreamer/gst-plugins-bad/tree/gst/timecode
-[timecode-talk]: https://gstconf.ubicast.tv/videos/smpte-timecodes-in-gstreamer/
-
-#### GStreamer OpenMAX IL plugin
-
-The last gst-omx release, 1.2.0, was in July 2014. It was about time to get
-a new one out with all the improvements that have happened in the meantime.
-From now on, we will try to release gst-omx together with all other modules.
-
-This release features a lot of bugfixes, improved support for the Raspberry Pi
-and in general improved support for zerocopy rendering via EGL and a few minor
-new features.
-
-At this point, gst-omx is known to work best on the Raspberry Pi platform but
-it is also known to work on various other platforms. Unfortunately, we are
-not including configurations for any other platforms, so if you happen to use
-gst-omx: please send us patches with your configuration and code changes!
-
-### New Elements
-
-#### decodebin3, playbin3, parsebin (experimental)
-
-This release features new decoding and playback elements as experimental
-technology previews: `decodebin3` and `playbin3` will soon supersede the
-existing `decodebin` and `playbin` elements. We skipped the number 2 because
-it was already used back in the 0.10 days, which might cause confusion.
-Experimental technology preview means that everything should work fine already,
-but we can't guarantee there won't be minor behavioural changes in the
-next cycle. In any case, please test and report any problems back.
-
-Before we go into detail about what these new elements improve, let's look at
-the new [`parsebin`][parsebin] element. It works similarly to `decodebin` and
-`decodebin3`, only that it stops one step short and does not plug any actual
-decoder elements. It will only plug parsers, tag readers, demuxers and
-depayloaders. Also note that parsebin does not contain any queueing element.
-
-[`decodebin3`'s][decodebin3] internal architecture is slightly different from
-the existing `decodebin` element and fixes many long-standing issues with our
-decoding engine. For one, data is now fed into the internal `multiqueue` element
-*after* it has been parsed and timestamped, which means that the `multiqueue`
-element now has more knowledge and is able to calculate the interleaving of the
-various streams, thus minimizing memory requirements and doing away with magic
-values for buffering limits that were conceived when videos were 240p or 360p.
-Anyone who has tried to play back 4k video streams with decodebin2
-will have noticed the limitations of that approach. The improved timestamp
-tracking also enables `multiqueue` to keep streams of the same type (audio,
-video) aligned better, making sure switching between streams of the same type
-is very fast.
-
-Another major improvement in `decodebin3` is that it will no longer decode
-streams that are not being used. With the old `decodebin` and `playbin`, when
-there were 8 audio streams we would always decode all 8 streams even
-if 7 were not actually used. This caused a lot of CPU overhead, which was
-particularly problematic on embedded devices. When switching between streams
-`decodebin3` will try hard to re-use existing decoders. This is useful when
-switching between multiple streams of the same type if they are encoded in the
-same format.
-
-Re-using decoders is also useful when the available streams change on the fly,
-as might happen with radio streams (chained Oggs), digital television
-broadcasts, when adaptive streaming streams change bitrate, or when switching
-gaplessly to the next title. In order to guarantee a seamless transition, the
-old `decodebin2` would plug a second decoder for the new stream while finishing
-up the old stream. With `decodebin3`, this is no longer needed - at least not
-when the new and old format are the same. This will be particularly useful
-on embedded systems where it is often not possible to run multiple decoders
-at the same time, or when tearing down and setting up decoders is fairly
-expensive.
-
-`decodebin3` also allows for multiple input streams, not just a single one.
-This will be useful, in the future, for gapless playback, or for feeding
-multiple external subtitle streams to decodebin/playbin.
-
-`playbin3` uses `decodebin3` internally, and will supercede `playbin`.
-It was decided that it would be too risky to make the old `playbin` use the
-new `decodebin3` in a backwards-compatible way. The new architecture
-makes it awkward, if not impossible, to maintain perfect backwards compatibility
-in some aspects, hence `playbin3` was born, and developers can migrate to the
-new element and new API at their own pace.
-
-All of these new elements make use of the new `GstStream` API for listing and
-selecting streams, as described above. `parsebin` provides backwards
-compatibility for demuxers and parsers which do not advertise their streams
-using the new API yet (which is most).
-
-The new elements are not entirely feature-complete yet: `playbin3` does not
-support so-called decodersinks yet where the data is not decoded inside
-GStreamer but passed directly for decoding to the sink. `decodebin3` is missing
-the various `autoplug-*` signals to influence which decoders get autoplugged
-in which order. We're looking to add back this functionality, but it will probably
-be in a different way, with a single unified signal and using GstStream perhaps.
-
-For more information on these new elements, check out Edward Hervey's talk
-[*decodebin3 - dealing with modern playback use cases*][db3-talk]
-
-[parsebin]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-base-plugins/html/gst-plugins-base-plugins-parsebin.html
-[decodebin3]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-base-plugins/html/gst-plugins-base-plugins-decodebin3.html
-[db3-talk]: https://gstconf.ubicast.tv/videos/decodebin3-or-dealing-with-modern-playback-use-cases/
-
-#### LV2 ported from 0.10 and switched from slv2 to lilv2
-
-The LV2 wrapper plugin has been ported to 1.0 and moved from using the
-deprecated slv2 library to its replacement liblv2. We support sources and
-filter elements. lv2 is short for *Linux Audio Developer's Simple Plugin API
-(LADSPA) version 2* and is an open standard for audio plugins which includes
-support for audio synthesis (generation), digital signal processing of digital
-audio, and MIDI. The new lv2 plugin supersedes the existing LADSPA plugin.
-
-#### WebRTC DSP Plugin for echo-cancellation, gain control and noise suppression
-
-A set of new elements ([webrtcdsp][webrtcdsp], [webrtcechoprobe][webrtcechoprobe])
-based on the WebRTC DSP software stack can now be used to improve your audio
-voice communication pipelines. They support echo cancellation, gain control,
-noise suppression and more. For more details you may read
-[Nicolas' blog post][webrtc-blog-post].
-
-[webrtcdsp]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-bad-plugins/html/gst-plugins-bad-plugins-webrtcdsp.html
-[webrtcechoprobe]: https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-bad-plugins/html/gst-plugins-bad-plugins-webrtcechoprobe.html
-[webrtc-blog-post]: https://ndufresne.ca/2016/06/gstreamer-echo-canceller/
-
-#### Fraunhofer FDK AAC encoder and decoder
-
-New encoder and decoder elements wrapping the Fraunhofer FDK AAC library have
-been added (`fdkaacdec`, `fdkaacdec`). The Fraunhofer FDK AAC encoder is
-generally considered to be a very high-quality AAC encoder, but unfortunately
-it comes under a non-free license with the option to obtain a paid, commercial
-license.
-
-### Noteworthy element features and additions
-
-#### Major RTP and RTSP improvements
-
-- The RTSP server and source element, as well as the RTP jitterbuffer now support
- remote clock synchronization according to [RFC7273][https://tools.ietf.org/html/rfc7273].
-- Support for application and profile specific RTCP packets was added.
-- The H265/HEVC payloader/depayloader is again in sync with the final RFC.
-- Seeking stability of the RTSP source and server was improved a lot and
- runs stably now, even when doing scrub-seeking.
-- The RTSP server received various major bugfixes, including for regressions that
- caused the IP/port address pool to not be considered, or NAT hole punching
- to not work anymore. [Bugzilla #766612][https://bugzilla.gnome.org/show_bug.cgi?id=766612]
-- Various other bugfixes that improve the stability of RTP and RTSP, including
- many new unit / integration tests.
-
-#### Improvements to splitmuxsrc and splitmuxsink
-
-- The splitmux element received reliability and error handling improvements,
- removing at least one deadlock case. `splitmuxsrc` now stops cleanly at the end
- of the segment when handling seeks with a stop time. We fixed a bug with large
- amounts of downstream buffering causing incorrect out-of-sequence playback.
-
-- `splitmuxsrc` now has a `"format-location"` signal to directly specify the list
- of files to play from.
-
-- `splitmuxsink` can now optionally send force-keyunit events to upstream
- elements to allow splitting files more accurately instead of having to wait
- for upstream to provide a new keyframe by itself.
-
-#### OpenGL/GLES improvements
-
-##### iOS and macOS (OS/X)
-
-- We now create OpenGL|ES 3.x contexts on iOS by default with a fallback to
- OpenGL|ES 2.x if that fails.
-- Various zerocopy decoding fixes and enhancements with the
- encoding/decoding/capturing elements.
-- libdispatch is now used on all Apple platforms instead of GMainLoop, removing
- the expensive poll()/pthread_*() overhead.
-
-##### New API
-
-- `GstGLFramebuffer` - for wrapping OpenGL frame buffer objects. It provides
- facilities for attaching `GstGLMemory` objects to the necessary attachment
- points, binding and unbinding and running a user-supplied function with the
- framebuffer bound.
-- `GstGLRenderbuffer` (a `GstGLBaseMemory` subclass) - for wrapping OpenGL
- render buffer objects that are typically used for depth/stencil buffers or
- for color buffers where we don't care about the output.
-- `GstGLMemoryEGL` (a `GstGLMemory` subclass) - for combining `EGLImage`s with a GL
- texture that replaces `GstEGLImageMemory` bringing the improvements made to the
- other `GstGLMemory` implementations. This fixes a performance regression in
- zerocopy decoding on the Raspberry Pi when used with an updated gst-omx.
-
-##### Miscellaneous improvements
-
-- `gltestsrc` is now usable on devices/platforms with OpenGL 3.x and OpenGL|ES
- and has completed or gained support for new patterns in line with the
- existing ones in `videotestsrc`.
-- `gldeinterlace` is now available on devices/platforms with OpenGL|ES
- implementations.
-- The dispmanx backend (used on the Raspberry Pi) now supports the
- `gst_video_overlay_set_window_handle()` and
- `gst_video_overlay_set_render_rectangle()` functions.
-- The `gltransformation` element now correctly transforms mouse coordinates (in
- window space) to stream coordinates for both perspective and orthographic
- projections.
-- The `gltransformation` element now detects if the
- `GstVideoAffineTransformationMeta` is supported downstream and will efficiently
- pass its transformation downstream. This is a performance improvement as it
- results in less processing being required.
-- The wayland implementation now uses the multi-threaded safe event-loop API
- allowing correct usage in applications that call wayland functions from
- multiple threads.
-- Support for native 90 degree rotations and horizontal/vertical flips
- in `glimagesink`.
-
-#### Vulkan
-
-- The Vulkan elements now work under Wayland and have received numerous
- bugfixes.
-
-#### QML elements
-
-- `qmlglsink` video sink now works on more platforms, notably, Windows, Wayland,
- and Qt's eglfs (for embedded devices with an OpenGL implementation) including
- the Raspberry Pi.
-- New element `qmlglsrc` to record a QML scene into a GStreamer pipeline.
-
-#### KMS video sink
-
-- New element `kmssink` to render video using Direct Rendering Manager
- (DRM) and Kernel Mode Setting (KMS) subsystems in the Linux
- kernel. It is oriented to be used mostly in embedded systems.
-
-#### Wayland video sink
-
-- `waylandsink` now supports the wl_viewporter extension allowing
- video scaling and cropping to be delegated to the Wayland
- compositor. This extension is also been made optional, so that it can
- also work on current compositors that don't support it. It also now has
- support for the video meta, allowing zero-copy operations in more
- cases.
-
-#### DVB improvements
-
-- `dvbsrc` now has better delivery-system autodetection and several
- new parameter sanity-checks to improve its resilience to configuration
- omissions and errors. Superfluous polling continues to be trimmed down,
- and the debugging output has been made more consistent and precise.
- Additionally, the channel-configuration parser now supports the new dvbv5
- format, enabling `dvbbasebin` to automatically playback content transmitted
- on delivery systems that previously required manual description, like ISDB-T.
-
-#### DASH, HLS and adaptivedemux
-
-- HLS now has support for Alternate Rendition audio and video tracks. Full
- support for Alternate Rendition subtitle tracks will be in an upcoming release.
-- DASH received support for keyframe-only trick modes if the
- `GST_SEEK_FLAG_TRICKMODE_KEY_UNITS` flag is given when seeking. It will
- only download keyframes then, which should help with high-speed playback.
- Changes to skip over multiple frames based on bandwidth and other metrics
- will be added in the near future.
-- Lots of reliability fixes around seek handling and bitrate switching.
-
-#### Bluetooth improvements
-
-- The `avdtpsrc` element now supports metadata such as track title, artist
- name, and more, which devices can send via AVRCP. These are published as
- tags on the pipeline.
-- The `a2dpsink` element received some love and was cleaned up so that it
- actually works after the initial GStreamer 1.0 port.
-
-#### GStreamer VAAPI
-
-- All the decoders have been split, one plugin feature per codec. So
- far, the available ones, depending on the driver, are:
- `vaapimpeg2dec`, `vaapih264dec`, `vaapih265dec`, `vaapivc1dec`, `vaapivp8dec`,
- `vaapivp9dec` and `vaapijpegdec` (which already was split).
-- Improvements when mapping VA surfaces into memory. It now differentiates
- between negotiation caps and allocations caps, since the allocation
- memory for surfaces may be bigger than one that is going to be
- mapped.
-- `vaapih265enc` now supports constant bitrate mode (CBR).
-- Since several VA drivers are unmaintained, we decide to keep a whitelist
- with the va drivers we actually test, which is mostly the i915 and to a lesser
- degree gallium from the mesa project. Exporting the environment variable
- `GST_VAAPI_ALL_DRIVERS` disables the whitelist.
-- Plugin features are registered at run-time, according to their support by
- the loaded VA driver. So only the decoders and encoder supported by the
- system are registered. Since the driver can change, some dependencies are
- tracked to invalidate the GStreamer registry and reload the plugin.
-- `dmabuf` importation from upstream has been improved, gaining performance.
-- `vaapipostproc` now can negotiate buffer transformations via caps.
-- Decoders now can do I-frame only reverse playback. This decodes I-frames
- only because the surface pool is smaller than the required by the GOP to show all the
- frames.
-- The upload of frames onto native GL textures has been optimized too, keeping
- a cache of the internal structures for the offered textures by the sink.
-
-#### V4L2 changes
-
-- More pixels formats are now supported
-- Decoder is now using `G_SELECTION` instead of the deprecated `G_CROP`
-- Decoder now uses the `STOP` command to handle EOS
-- Transform element can now scale the pixel aspect ratio
-- Colorimetry support has been improved even more
-- We now support the `OUTPUT_OVERLAY` type of video node in v4l2sink
-
-#### Miscellaneous
-
-- `multiqueue`'s input pads gained a new `"group-id"` property which
- can be used to group input streams. Typically one will assign
- different id numbers to audio, video and subtitle streams for
- example. This way `multiqueue` can make sure streams of the same
- type advance in lockstep if some of the streams are unlinked and the
- `"sync-by-running-time"` property is set. This is used in
- decodebin3/playbin3 to implement almost-instantaneous stream
- switching. The grouping is required because different downstream
- paths (audio, video, etc.) may have different buffering/latency
- etc. so might be consuming data from multiqueue with a slightly
- different phase, and if we track different stream groups separately
- we minimize stream switching delays and buffering inside the
- `multiqueue`.
-- `alsasrc` now supports ALSA drivers without a position for each
- channel, this is common in some professional or industrial hardware.
-- `libvpx` based decoders (`vp8dec` and `vp9dec`) now create multiple threads on
- computers with multiple CPUs automatically.
-- `rfbsrc` - used for capturing from a VNC server - has seen a lot of
- debugging. It now supports the latest version of the RFB
- protocol and uses GIO everywhere.
-- `tsdemux` can now read ATSC E-AC-3 streams.
-- New `GstVideoDirection` video orientation interface for rotating, flipping
- and mirroring video in 90° steps. It is implemented by the `videoflip` and
- `glvideoflip` elements currently.
-- It is now possible to give `appsrc` a duration in time, and there is now a
- non-blocking try-pull API for `appsink` that returns NULL if nothing is
- available right now.
-- `x264enc` has support now for chroma-site and colorimetry settings
-- A new JPEG2000 parser element was added, and the JPEG2000 caps were cleaned
- up and gained more information needed in combination with RTP and various
- container formats.
-- Reverse playback support for `videorate` and `deinterlace` was implemented
-- Various improvements everywhere for reverse playback and `KEY_UNITS` trick mode
-- New cleaned up `rawaudioparse` and `rawvideoparse` elements that replace the
- old `audioparse` and `videoparse` elements. There are compatibility element
- factories registered with the old names to allow existing code to continue
- to work.
-- The Decklink plugin gained support for 10 bit video SMPTE timecodes, and
- generally got many bugfixes for various issues.
-- New API in `GstPlayer` for setting the multiview mode for stereoscopic
- video, setting an HTTP/RTSP user agent and a time offset between audio and
- video. In addition to that, there were various bugfixes and the new
- gst-examples module contains Android, iOS, GTK+ and Qt example applications.
-- `GstBin` has new API for suppressing various `GstElement` or `GstObject`
- flags that would otherwise be affected by added/removed child elements. This
- new API allows `GstBin` subclasses to handle for themselves if they
- should be considered a sink or source element, for example.
-- The `subparse` element can handle WebVTT streams now.
-- A new `sdpsrc` element was added that can read an SDP from a file, or get it
- as a string as property and then sets up an RTP pipeline accordingly.
-
-### Plugin moves
-
-No plugins were moved this cycle. We'll make up for it next cycle, promise!
-
-### Rewritten memory leak tracer
-
-GStreamer has had basic functionality to trace allocation and freeing of
-both mini-objects (buffers, events, caps, etc.) and objects in the form of the
-internal `GstAllocTrace` tracing system. This API was never exposed in the
-1.x API series though. When requested, this would dump a list of objects and
-mini-objects at exit time which had still not been freed at that point,
-enabled with an environment variable. This subsystem has now been removed
-in favour of a new implementation based on the recently-added tracing framework.
-
-Tracing hooks have been added to trace the creation and destruction of
-GstObjects and mini-objects, and a new tracer plugin has been written using
-those new hooks to track which objects are still live and which are not. If
-GStreamer has been compiled against the libunwind library, the new leaks tracer
-will remember where objects were allocated from as well. By default the leaks
-tracer will simply output a warning if leaks have been detected on `gst_deinit()`.
-
-If the `GST_LEAKS_TRACER_SIG` environment variable is set, the leaks tracer
-will also handle the following UNIX signals:
-
- - `SIGUSR1`: log alive objects
- - `SIGUSR2`: create a checkpoint and print a list of objects created and
- destroyed since the previous checkpoint.
-
-Unfortunately this will not work on Windows due to no signals, however.
-
-If the `GST_LEAKS_TRACER_STACK_TRACE` environment variable is set, the leaks
-tracer will also log the creation stack trace of leaked objects. This may
-significantly increase memory consumption however.
-
-New `MAY_BE_LEAKED` flags have been added to GstObject and GstMiniObject, so
-that objects and mini-objects that are likely to stay around forever can be
-flagged and blacklisted from the leak output.
-
-To give the new leak tracer a spin, simply call any GStreamer application such
-as `gst-launch-1.0` or `gst-play-1.0` like this:
-
- GST_TRACERS=leaks gst-launch-1.0 videotestsrc num-buffers=10 ! fakesink
-
-If there are any leaks, a warning will be raised at the end.
-
-It is also possible to trace only certain types of objects or mini-objects:
-
- GST_TRACERS="leaks(GstEvent,GstMessage)" gst-launch-1.0 videotestsrc num-buffers=10 ! fakesink
-
-This dedicated leaks tracer is much much faster than valgrind since all code is
-executed natively instead of being instrumented. This makes it very suitable
-for use on slow machines or embedded devices. It is however limited to certain
-types of leaks and won't catch memory leaks when the allocation has been made
-via plain old `malloc()` or `g_malloc()` or other means. It will also not trace
-non-GstObject GObjects.
-
-The goal is to enable leak tracing on GStreamer's Continuous-Integration and
-testing system, both for the regular unit tests (make check) and media tests
-(gst-validate), so that accidental leaks in common code paths can be detected
-and fixed quickly.
-
-For more information about the new tracer, check out Guillaume Desmottes's
-["Tracking Memory Leaks"][leaks-talk] talk or his [blog post][leaks-blog] about
-the topic.
-
-[leaks-talk]: https://gstconf.ubicast.tv/videos/tracking-memory-leaks/
-[leaks-blog]: https://blog.desmottes.be/?post/2016/06/20/GStreamer-leaks-tracer
-
-### GES and NLE changes
-
-- Clip priorities are now handled by the layers, and the GESTimelineElement
- priority property is now deprecated and unused
-- Enhanced (de)interlacing support to always use the `deinterlace` element
- and expose needed properties to users
-- Allow reusing clips children after removing the clip from a layer
-- We are now testing many more rendering formats in the gst-validate
- test suite, and failures have been fixed.
-- Also many bugs have been fixed in this cycle!
-
-### GStreamer validate changes
-
-This cycle has been focused on making GstValidate more than just a validating
-tool, but also a tool to help developers debug their GStreamer issues. When
-reporting issues, we try to gather as much information as possible and expose
-it to end users in a useful way. For an example of such enhancements, check out
-Thibault Saunier's [blog post](improving-debugging-gstreamer-validate) about
-the new Not Negotiated Error reporting mechanism.
-
-Playbin3 support has been added so we can run validate tests with `playbin3`
-instead of playbin.
-
-We are now able to properly communicate between `gst-validate-launcher` and
-launched subprocesses with actual IPC between them. That has enabled the test
-launcher to handle failing tests specifying the exact expected issue(s).
-
-[improving-debugging-gstreamer-validate]: https://blogs.s-osg.org/improving-debugging-gstreamer-validate/
-
-### gst-libav changes
-
-gst-libav uses the recently released ffmpeg 3.2 now, which brings a lot of
-improvements and bugfixes from the ffmpeg team in addition to various new
-codec mappings on the GStreamer side and quite a few bugfixes to the GStreamer
-integration to make it more robust.
-
-## Build and Dependencies
-
-### Experimental support for Meson as build system
-
-#### Overview
-
-We have have added support for building GStreamer using the
-[Meson build system][meson]. This is currently experimental, but should work
-fine at least on Linux using the gcc or clang toolchains and on Windows using
-the MingW or MSVC toolchains.
-
-Autotools remains the primary build system for the time being, but we hope to
-someday replace it and will steadily work towards that goal.
-
-More information about the background and implications of all this and where
-we're hoping to go in future with this can be found in [Tim's mail][meson-mail]
-to the gstreamer-devel mailing list.
-
-For more information on Meson check out [these videos][meson-videos] and also
-the [Meson talk][meson-gstconf] at the GStreamer Conference.
-
-Immediate benefits for Linux users are faster builds and rebuilds. At the time
-of writing the Meson build of GStreamer is used by default in GNOME's jhbuild
-system.
-
-The Meson build currently still lacks many of the fine-grained configuration
-options to enable/disable specific plugins. These will be added back in due
-course.
-
-Note: The meson build files are not distributed in the source tarballs, you will
-need to get GStreamer from git if you want try it out.
-
-[meson]: http://mesonbuild.com/
-[meson-mail]: https://lists.freedesktop.org/archives/gstreamer-devel/2016-September/060231.html
-[meson-videos]: http://mesonbuild.com/videos.html
-[meson-gstconf]: https://gstconf.ubicast.tv/videos/gstreamer-development-on-windows-ans-faster-builds-everywhere-with-meson/
-
-#### Windows Visual Studio toolchain support
-
-Windows users might appreciate being able to build GStreamer using the MSVC
-toolchain, which is not possible using autotools. This means that it will be
-possible to debug GStreamer and applications in Visual Studio, for example.
-We require VS2015 or newer for this at the moment.
-
-There are two ways to build GStreamer using the MSVC toolchain:
-
-1. Using the MSVC command-line tools (`cl.exe` etc.) via Meson's "ninja" backend.
-2. Letting Meson's "vs2015" backend generate Visual Studio project files that
- can be opened in Visual Studio and compiled from there.
-
-This is currently only for adventurous souls though. All the bits are in place,
-but support for all of this has not been merged into GStreamer's cerbero build
-tool yet at the time of writing. This will hopefully happen in the next cycle,
-but for now this means that those wishing to compile GStreamer with MSVC will
-have to get their hands dirty.
-
-There are also no binary SDK builds using the MSVC toolchain yet.
-
-For more information on GStreamer builds using Meson and the Windows toolchain
-check out Nirbheek Chauhan's blog post ["Building and developing GStreamer using Visual Studio"][msvc-blog].
-
-[msvc-blog]: http://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html
-
-### Dependencies
-
-#### gstreamer
-
-libunwind was added as an optional dependency. It is used only for debugging
-and tracing purposes.
-
-The `opencv` plugin in gst-plugins-bad can now be built against OpenCV
-version 3.1, previously only 2.3-2.5 were supported.
-
-#### gst-plugins-ugly
-
-- `mpeg2dec` now requires at least libmpeg2 0.5.1 (from 2008).
-
-#### gst-plugins-bad
-
-- `gltransformation` now requires at least graphene 1.4.0.
-
-- `lv2` now plugin requires at least lilv 0.16 instead of slv2.
-
-### Packaging notes
-
-Packagers please note that the `gst/gstconfig.h` public header file in the
-GStreamer core library moved back from being an architecture dependent include
-to being architecture independent, and thus it is no longer installed into
-`$(libdir)/gstreamer-1.0/include/gst` but into the normal include directory
-where it lives happily ever after with all the other public header files. The
-reason for this is that we now check whether the target supports unaligned
-memory access based on predefined compiler macros at compile time instead of
-checking it at configure time.
-
-## Platform-specific improvements
-
-### Android
-
-#### New universal binaries for all supported ABIs
-
-We now provide a "universal" tarball to allow building apps against all the
-architectures currently supported (x86, x86-64, armeabi, armeabi-v7a,
-armeabi-v8a). This is needed for building with recent versions of the Android
-NDK which defaults to building against all supported ABIs. Use [the Android
-player example][android-player-example-build] as a reference for the required
-changes.
-
-[android-player-example-build]: https://cgit.freedesktop.org/gstreamer/gst-examples/commit/playback/player/android?id=a5cdde9119f038a1eb365aca20faa9741a38e788
-
-#### Miscellaneous
-
-- New `ahssrc` element that allows reading the hardware sensors, e.g. compass
- or accelerometer.
-
-### macOS (OS/X) and iOS
-
-- Support for querying available devices on OS/X via the GstDeviceProvider
- API was added.
-- It is now possible to create OpenGL|ES 3.x contexts on iOS and use them in
- combination with the VideoToolbox based decoder element.
-- many OpenGL/GLES improvements, see OpenGL section above
-
-### Windows
-
-- gstconfig.h: Always use dllexport/import on Windows with MSVC
-- Miscellaneous fixes to make libs and plugins compile with the MVSC toolchain
-- MSVC toolchain support (see Meson section above for more details)
-
-## New Modules for Documentation, Examples, Meson Build
-
-Three new git modules have been added recently:
-
-### gst-docs
-
-This is a new module where we will maintain documentation in the markdown
-format.
-
-It contains the former gstreamer.com SDK tutorials which have kindly been made
-available by Fluendo under a Creative Commons license. The tutorials have been
-reviewed and updated for GStreamer 1.x and will be available as part of the
-[official GStreamer documentation][doc] going forward. The old gstreamer.com
-site will then be shut down with redirects pointing to the updated tutorials.
-
-Some of the existing docbook XML-formatted documentation from the GStreamer
-core module such as the *Application Development Manual* and the *Plugin
-Writer's Guide* have been converted to markdown as well and will be maintained
-in the gst-docs module in future. They will be removed from the GStreamer core
-module in the next cycle.
-
-This is just the beginning. Our goal is to provide a more cohesive documentation
-experience for our users going forward, and easier to create and maintain
-documentation for developers. There is a lot more work to do, get in touch if
-you want to help out.
-
-If you encounter any problems or spot any omissions or outdated content in the
-new documentation, please [file a bug in bugzilla][doc-bug] to let us know.
-
-We will probably release gst-docs as a separate tarball for distributions to
-package in the next cycle.
-
-[doc]: http://gstreamer.freedesktop.org/documentation/
-[doc-bug]: https://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer&component=documentation
-
-### gst-examples
-
-A new [module][examples-git] has been added for examples. It does not contain
-much yet, currently it only contains a small [http-launch][http-launch] utility
-that serves a pipeline over http as well as various [GstPlayer playback frontends][puis]
-for Android, iOS, Gtk+ and Qt.
-
-More examples will be added over time. The examples in this repository should
-be more useful and more substantial than most of the examples we ship as part
-of our other modules, and also written in a way that makes them good example
-code. If you have ideas for examples, let us know.
-
-No decision has been made yet if this module will be released and/or packaged.
-It probably makes sense to do so though.
-
-[examples-git]: https://cgit.freedesktop.org/gstreamer/gst-examples/tree/
-[http-launch]: https://cgit.freedesktop.org/gstreamer/gst-examples/tree/network/http-launch/
-[puis]: https://cgit.freedesktop.org/gstreamer/gst-examples/tree/playback/player
-
-### gst-build
-
-[gst-build][gst-build-git] is a new meta module to build GStreamer using the
-new Meson build system. This module is not required to build GStreamer with
-Meson, it is merely for convenience and aims to provide a development setup
-similar to the existing `gst-uninstalled` setup.
-
-gst-build makes use of Meson's [subproject feature][meson-subprojects] and sets
-up the various GStreamer modules as subprojects, so they can all be updated and
-built in parallel.
-
-This module is still very new and highly experimental. It should work at least
-on Linux and Windows (OS/X needs some build fixes). Let us know of any issues
-you encounter by popping into the `#gstreamer` IRC channel or by
-[filing a bug][gst-build-bug].
-
-This module will probably not be released or packaged (does not really make sense).
-
-[gst-build-git]: https://cgit.freedesktop.org/gstreamer/gst-build/tree/
-[gst-build-bug]: https://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer&component=gst-build
-[meson-subprojects]: https://github.com/mesonbuild/meson/wiki/Subprojects
-
-## Contributors
-
-Aaron Boxer, Aleix Conchillo Flaqué, Alessandro Decina, Alexandru Băluț, Alex
-Ashley, Alex-P. Natsios, Alistair Buxton, Allen Zhang, Andreas Naumann, Andrew
-Eikum, Andy Devar, Anthony G. Basile, Arjen Veenhuizen, Arnaud Vrac, Artem
-Martynovich, Arun Raghavan, Aurélien Zanelli, Barun Kumar Singh, Bernhard
-Miller, Brad Lackey, Branko Subasic, Carlos Garcia Campos, Carlos Rafael
-Giani, Christoffer Stengren, Daiki Ueno, Damian Ziobro, Danilo Cesar Lemes de
-Paula, David Buchmann, Dimitrios Katsaros, Duncan Palmer, Edward Hervey,
-Emmanuel Poitier, Enrico Jorns, Enrique Ocaña González, Fabrice Bellet,
-Florian Zwoch, Florin Apostol, Francisco Velazquez, Frédéric Bertolus, Fredrik
-Fornwall, Gaurav Gupta, George Kiagiadakis, Georg Lippitsch, Göran Jönsson,
-Graham Leggett, Gregoire Gentil, Guillaume Desmottes, Gwang Yoon Hwang, Haakon
-Sporsheim, Haihua Hu, Havard Graff, Heinrich Fink, Hoonhee Lee, Hyunjun Ko,
-Iain Lane, Ian, Ian Jamison, Jagyum Koo, Jake Foytik, Jakub Adam, Jan
-Alexander Steffens (heftig), Jan Schmidt, Javier Martinez Canillas, Jerome
-Laheurte, Jesper Larsen, Jie Jiang, Jihae Yi, Jimmy Ohn, Jinwoo Ahn, Joakim
-Johansson, Joan Pau Beltran, Jonas Holmberg, Jonathan Matthew, Jonathan Roy,
-Josep Torra, Julien Isorce, Jun Ji, Jürgen Slowack, Justin Kim, Kazunori
-Kobayashi, Kieran Bingham, Kipp Cannon, Koop Mast, Kouhei Sutou, Kseniia, Kyle
-Schwarz, Kyungyong Kim, Linus Svensson, Luis de Bethencourt, Marcin Kolny,
-Marcin Lewandowski, Marianna Smidth Buschle, Mario Sanchez Prada, Mark
-Combellack, Mark Nauwelaerts, Martin Kelly, Matej Knopp, Mathieu Duponchelle,
-Mats Lindestam, Matthew Gruenke, Matthew Waters, Michael Olbrich, Michal Lazo,
-Miguel París Díaz, Mikhail Fludkov, Minjae Kim, Mohan R, Munez, Nicola Murino,
-Nicolas Dufresne, Nicolas Huet, Nikita Bobkov, Nirbheek Chauhan, Olivier
-Crête, Paolo Pettinato, Patricia Muscalu, Paulo Neves, Peng Liu, Peter
-Seiderer, Philippe Normand, Philippe Renon, Philipp Zabel, Pierre Lamot, Piotr
-Drąg, Prashant Gotarne, Raffaele Rossi, Ray Strode, Reynaldo H. Verdejo
-Pinochet, Santiago Carot-Nemesio, Scott D Phillips, Sebastian Dröge, Sebastian
-Rasmussen, Sergei Saveliev, Sergey Borovkov, Sergey Mamonov, Sergio Torres
-Soldado, Seungha Yang, sezero, Song Bing, Sreerenj Balachandran, Stefan Sauer,
-Stephen, Steven Hoving, Stian Selnes, Thiago Santos, Thibault Saunier, Thijs
-Vermeir, Thomas Bluemel, Thomas Jones, Thomas Klausner, Thomas Scheuermann,
-Tim-Philipp Müller, Ting-Wei Lan, Tom Schoonjans, Ursula Maplehurst, Vanessa
-Chipirras Navalon, Víctor Manuel Jáquez Leal, Vincent Penquerc'h, Vineeth TM,
-Vivia Nikolaidou, Vootele Vesterblom, Wang Xin-yu (王昕宇), William Manley,
-Wim Taymans, Wonchul Lee, Xabier Rodriguez Calvar, Xavier Claessens, xlazom00,
-Yann Jouanin, Zaheer Abbas Merali
-
-... and many others who have contributed bug reports, translations, sent
-suggestions or helped testing.
-
-## Bugs fixed in 1.10
-
-More than [750 bugs][bugs-fixed-in-1.10] have been fixed during
-the development of 1.10.
-
-This list does not include issues that have been cherry-picked into the
-stable 1.8 branch and fixed there as well, all fixes that ended up in the
-1.8 branch are also included in 1.10.
-
-This list also does not include issues that have been fixed without a bug
-report in bugzilla, so the actual number of fixes is much higher.
-
-[bugs-fixed-in-1.10]: https://bugzilla.gnome.org/buglist.cgi?bug_status=RESOLVED&bug_status=VERIFIED&classification=Platform&limit=0&list_id=164074&order=bug_id&product=GStreamer&query_format=advanced&resolution=FIXED&target_milestone=1.8.1&target_milestone=1.8.2&target_milestone=1.8.3&target_milestone=1.8.4&target_milestone=1.9.1&target_milestone=1.9.2&target_milestone=1.9.90&target_milestone=1.10.0
-
-## Stable 1.10 branch
-
-After the 1.10.0 release there will be several 1.10.x bug-fix releases which
-will contain bug fixes which have been deemed suitable for a stable branch,
-but no new features or intrusive changes will be added to a bug-fix release
-usually. The 1.10.x bug-fix releases will be made from the git 1.10 branch,
-which is a stable branch.
-
-### 1.10.0
-
-1.10.0 was released on 1st November 2016.
-
-## Known Issues
-
-- iOS builds with iOS 6 SDK and old C++ STL. You need to select iOS 6 instead
- of 7 or 8 in your projects settings to be able to link applications.
- [Bug #766366](https://bugzilla.gnome.org/show_bug.cgi?id=766366)
-- Code signing for Apple platforms has some problems currently, requiring
- manual work to get your application signed. [Bug #771860](https://bugzilla.gnome.org/show_bug.cgi?id=771860)
-- Building applications with Android NDK r13 on Windows does not work. Other
- platforms and earlier/later versions of the NDK are not affected.
- [Bug #772842](https://bugzilla.gnome.org/show_bug.cgi?id=772842)
-- The new leaks tracer may deadlock the application (or exhibit other undefined
- behaviour) when `SIGUSR` handling is enabled via the `GST_LEAKS_TRACER_SIG`
- environment variable. [Bug #770373](https://bugzilla.gnome.org/show_bug.cgi?id=770373)
-- vp8enc crashes on 32 bit Windows, but was working fine in 1.6. 64 bit Windows is unaffected.
- [Bug #763663](https://bugzilla.gnome.org/show_bug.cgi?id=763663)
-
-## Schedule for 1.12
-
-Our next major feature release will be 1.12, and 1.11 will be the unstable
-development version leading up to the stable 1.12 release. The development
-of 1.11/1.12 will happen in the git master branch.
-
-The plan for the 1.12 development cycle is yet to be confirmed, but it is
-expected that feature freeze will be around early/mid-January,
-followed by several 1.11 pre-releases and the new 1.12 stable release
-in March.
-
-1.12 will be backwards-compatible to the stable 1.10, 1.8, 1.6, 1.4, 1.2 and
-1.0 release series.
-
-- - -
-
-*These release notes have been prepared by Olivier Crête, Sebastian Dröge,
-Nicolas Dufresne, Edward Hervey, Víctor Manuel Jáquez Leal, Tim-Philipp
-Müller, Reynaldo H. Verdejo Pinochet, Arun Raghavan, Thibault Saunier,
-Jan Schmidt, Wim Taymans, Matthew Waters*
-
-*License: [CC BY-SA 4.0](http://creativecommons.org/licenses/by-sa/4.0/)*
-
+This is GStreamer 1.11.1.
-Release notes for GStreamer Base Plugins 1.10.0
+Release notes for GStreamer Base Plugins 1.11.1
-The GStreamer team is pleased to announce the first release of the new stable
-1.10 release series. The 1.10 release series is adding new features on top of
-the 1.0, 1.2, 1.4, 1.6 and 1.8 series and is part of the API and ABI-stable 1.x
-release series of the GStreamer multimedia framework.
+The GStreamer team is pleased to announce the first release of the unstable
+1.11 release series. The 1.11 release series is adding new features on top of
+the 1.0, 1.2, 1.4, 1.6, 1.8 and 1.10 series and is part of the API and ABI-stable 1.x release
+series of the GStreamer multimedia framework. The unstable 1.11 release series
+will lead to the stable 1.12 release series in the next weeks. Any newly added
+API can still change until that point.
-Binaries for Android, iOS, Mac OS X and Windows will be provided shortly after
-the source release by the GStreamer project during the stable 1.10 release
-series.
+Full release notes will be provided at some point during the 1.11 release
+cycle, highlighting all the new features, bugfixes, performance optimizations
+and other important changes.
+
+
+Binaries for Android, iOS, Mac OS X and Windows will be provided in the next days.
This module contains a set of reference plugins, base classes for other
Bugs fixed in this release
- * 768763 : vorbisenc, opusenc reconfiguration broken
- * 772500 : opusdec: Fix memory leak in test code
- * 772501 : videorate: Fix memory leak in test code
- * 772676 : parsebin: Use gst_playback_utils_compare_factories_func
- * 772855 : decodebin3: Implement lock for multiqueue slot
- * 773103 : videodecoder: Default caps sets format I420
- * 773105 : audioencoder: Error-handling for pushing headers
- * 773107 : audioencoder: Plug buffer-leak
- * 773181 : x264enc refuses to negotiate I420 or baseline profiles!
- * 773441 : decodebin3: GStreamer-CRITICAL **: gst_mini_object_unref: assertion 'mini_object != NULL' failed
+ * 678301 : audioringbuffer: introspection fixes and API clean up for bindings
+ * 699077 : videorate: add " rate " property to modify clip speed
+ * 744191 : encodebin: Need more buffers in output queue for better performance
+ * 749567 : tcpclientsrc: add timeout property
+ * 752052 : appsrc: Initialize min and max vars in get_property() for fix compiler warnings
+ * 756628 : audioclock: Add run time type check safety
+ * 758259 : discoverer: Add support to dump dot files
+ * 759358 : Add GST_CAPS_FEATURE_MEMORY_DMABUF " memory:DMABuf "
+ * 765796 : rtp depayloaders output bad segment events when input stream is a non time segment
+ * 767450 : video-format: Add VYUY a packed 4:2:2 format
+ * 769698 : sdp: add support for rtcp-fb attributes
+ * 770355 : id3v2: Fix parsing extended header and string lists in UTF-16
+ * 771376 : video: Add top-field-first / bottom-field-first information to raw video caps if interlaced-mode=interleaved & proxy colorimetry in compressed caps too
+ * 772445 : urisourcebin: minor enhancements
+ * 772550 : urisourcebin: Fix minor typo and some FIXME list
+ * 772832 : parsebin: Rename variables include 'decode' to 'parse'
+ * 772864 : audioconvert: mask calculation optimization
+ * 773073 : audioconvert: endian conversion optimization
+ * 773102 : videotestsrc: Make snow deterministic
+ * 773165 : videodecoder: add _allocate_output_frame_with_params() to pass custom GstBufferPoolAcquireParams [API]
+ * 773341 : urisourcebin: Cleanup unused output slot
+ * 773944 : meson: Generate girs
+ * 774445 : meson: vorbis: Add -DTREMOR to flags for gstivorbisdec
+ * 774454 : playbin3: remove dead code
+ * 774484 : videodecoder, audiodecoder: parse format before checking in src_query_default
+ * 774588 : video-info: Catch overflows in the video frame size calculation
+ * 774728 : Subtitle showing as rectangular box in android platform
+ * 774878 : tag: fix some warnings in mklicensestables
+ * 774959 : rtpbuffer: fix ensure_buffers
+ * 775310 : playbin: Fix caps memory leak in usage of gst_static_caps_get() API
+ * 775369 : Audio distortion since commit 010b954 (regression)
+ * 775917 : tests: Do not use 'auto-select-streams' property in playbin3 test app
+ * 776038 : audioringbuffer: do not require 4 byte multiples for encoded audio
+ * 776188 : encodebin: Fallback to other profile if we fail with one
+ * 776447 : videotimecode: New GstVideoTimeCodeDiff type, ability to add to a GstVideoTimeCode
+ * 776458 : urisourcebin: Always configure typefind
+ * 777009 : urisourcebin: Never push actual EOS event to slot
+ * 772764 : GstVideoTimeCode lacks GstValue functions
==== Download ====
Contributors to this release
* Arun Raghavan
+ * Carlos Rafael Giani
+ * Changbok Chea
* Edward Hervey
- * Graham Leggett
- * Havard Graff
- * Jimmy Ohn
- * Nirbheek Chauhan
+ * Evan Nemerson
+ * Garima Gaur
+ * Guillaume Desmottes
+ * Jan Alexander Steffens (heftig)
+ * Jan Schmidt
+ * Joris Valette
+ * Julien Isorce
+ * Marcin Kolny
+ * Mark Nauwelaerts
+ * Matthew Waters
+ * Miguel Paris
+ * Nicola Murino
+ * Nicolas Dechesne
+ * Nicolas Dufresne
+ * Patricia Muscalu
+ * Petr Kulhavy
+ * Reynaldo H. Verdejo Pinochet
* Scott D Phillips
* Sebastian Dröge
* Seungha Yang
- * Stefan Sauer
+ * Song Bing
* Stian Selnes
+ * Stuart Weaver
* Thibault Saunier
+ * Thomas Bluemel
* Tim-Philipp Müller
+ * Tobias Mueller
+ * Tomasz Zajac
+ * Ulf Olsson
* Vincent Penquerc'h
+ * Vineeth TM
+ * Vivia Nikolaidou
* Wonchul Lee
+ * hoonhee.lee
\ No newline at end of file
dnl initialize autoconf
dnl releases only do -Wall, git and prerelease does -Werror too
dnl use a three digit version number for releases, and four for git/prerelease
-AC_INIT([GStreamer Base Plug-ins],[1.11.0.1],[http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer],[gst-plugins-base])
+AC_INIT([GStreamer Base Plug-ins],[1.11.1],[http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer],[gst-plugins-base])
AG_GST_INIT
dnl 1.10.9 (who knows) => 1009
dnl
dnl sets GST_LT_LDFLAGS
-AS_LIBTOOL(GST, 1100, 0, 1100)
+AS_LIBTOOL(GST, 1101, 0, 1101)
dnl *** required versions of GStreamer stuff ***
-GST_REQ=1.11.0.1
+GST_REQ=1.11.1
dnl *** autotools stuff ****
</ARG>
<ARG>
+<NAME>GstAppSink::buffer-list</NAME>
+<TYPE>gboolean</TYPE>
+<RANGE></RANGE>
+<FLAGS>rw</FLAGS>
+<NICK>Buffer List</NICK>
+<BLURB>Use buffer lists.</BLURB>
+<DEFAULT>FALSE</DEFAULT>
+</ARG>
+
+<ARG>
<NAME>GstVolume::mute</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
</ARG>
<ARG>
+<NAME>GstVideoRate::rate</NAME>
+<TYPE>gdouble</TYPE>
+<RANGE>>= 0</RANGE>
+<FLAGS>rw</FLAGS>
+<NICK>Rate</NICK>
+<BLURB>Factor of speed for frame displaying.</BLURB>
+<DEFAULT>1</DEFAULT>
+</ARG>
+
+<ARG>
<NAME>GstAudioConvert::dithering</NAME>
<TYPE>GstAudioDitherMethod</TYPE>
<RANGE></RANGE>
</ARG>
<ARG>
+<NAME>GstTCPClientSrc::timeout</NAME>
+<TYPE>guint</TYPE>
+<RANGE></RANGE>
+<FLAGS>rw</FLAGS>
+<NICK>timeout</NICK>
+<BLURB>Value in seconds to timeout a blocking I/O. 0 = No timeout. .</BLURB>
+<DEFAULT>0</DEFAULT>
+</ARG>
+
+<ARG>
<NAME>GstTCPClientSink::host</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
GstPlugin
GstPluginFeature
GstDeviceProviderFactory
+ GstDynamicTypeFactory
GstElementFactory
GstTracerFactory
GstTypeFindFactory
<description>Adds multiple streams</description>
<filename>../../gst/adder/.libs/libgstadder.so</filename>
<basename>libgstadder.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>ALSA plugin library</description>
<filename>../../ext/alsa/.libs/libgstalsa.so</filename>
<basename>libgstalsa.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>Elements used to communicate with applications</description>
<filename>../../gst/app/.libs/libgstapp.so</filename>
<basename>libgstapp.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>Convert audio to different formats</description>
<filename>../../gst/audioconvert/.libs/libgstaudioconvert.so</filename>
<basename>libgstaudioconvert.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>Adjusts audio frames</description>
<filename>../../gst/audiorate/.libs/libgstaudiorate.so</filename>
<basename>libgstaudiorate.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>Resamples audio</description>
<filename>../../gst/audioresample/.libs/libgstaudioresample.so</filename>
<basename>libgstaudioresample.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>Creates audio test signals of given frequency and volume</description>
<filename>../../gst/audiotestsrc/.libs/libgstaudiotestsrc.so</filename>
<basename>libgstaudiotestsrc.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>Read audio from CD in paranoid mode</description>
<filename>../../ext/cdparanoia/.libs/libgstcdparanoia.so</filename>
<basename>libgstcdparanoia.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>various encoding-related elements</description>
<filename>../../gst/encoding/.libs/libgstencodebin.so</filename>
<basename>libgstencodebin.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>GIO elements</description>
<filename>../../gst/gio/.libs/libgstgio.so</filename>
<basename>libgstgio.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>libvisual visualization plugins</description>
<filename>../../ext/libvisual/.libs/libgstlibvisual.so</filename>
<basename>libgstlibvisual.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>ogg stream manipulation (info about ogg: http://xiph.org)</description>
<filename>../../ext/ogg/.libs/libgstogg.so</filename>
<basename>libgstogg.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<element>
<name>ogmaudioparse</name>
<longname>OGM audio stream parser</longname>
- <class>Codec/Decoder/Audio</class>
+ <class>Codec/Parser/Audio</class>
<description>parse an OGM audio header and stream</description>
<author>GStreamer maintainers <gstreamer-devel@lists.freedesktop.org></author>
<pads>
<element>
<name>ogmvideoparse</name>
<longname>OGM video stream parser</longname>
- <class>Codec/Decoder/Video</class>
+ <class>Codec/Parser/Video</class>
<description>parse an OGM video header and stream</description>
<author>GStreamer maintainers <gstreamer-devel@lists.freedesktop.org></author>
<pads>
<description>OPUS plugin library</description>
<filename>../../ext/opus/.libs/libgstopus.so</filename>
<basename>libgstopus.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>Pango-based text rendering and overlay</description>
<filename>../../ext/pango/.libs/libgstpango.so</filename>
<basename>libgstpango.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<name>video_sink</name>
<direction>sink</direction>
<presence>always</presence>
- <details>video/x-raw, format=(string){ BGRx, RGBx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, I420, YV12, AYUV, YUY2, UYVY, v308, Y41B, Y42B, Y444, NV12, NV21, A420, YUV9, YVU9, IYU1, GRAY8 }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
+ <details>video/x-raw, format=(string){ BGRx, RGBx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, I420, YV12, AYUV, YUY2, UYVY, v308, Y41B, Y42B, Y444, NV12, NV21, A420, YUV9, YVU9, IYU1, GRAY8 }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, VYUY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
</caps>
<caps>
<name>src</name>
<direction>source</direction>
<presence>always</presence>
- <details>video/x-raw, format=(string){ BGRx, RGBx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, I420, YV12, AYUV, YUY2, UYVY, v308, Y41B, Y42B, Y444, NV12, NV21, A420, YUV9, YVU9, IYU1, GRAY8 }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
+ <details>video/x-raw, format=(string){ BGRx, RGBx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, I420, YV12, AYUV, YUY2, UYVY, v308, Y41B, Y42B, Y444, NV12, NV21, A420, YUV9, YVU9, IYU1, GRAY8 }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, VYUY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
</caps>
</pads>
</element>
<name>video_sink</name>
<direction>sink</direction>
<presence>always</presence>
- <details>video/x-raw, format=(string){ BGRx, RGBx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, I420, YV12, AYUV, YUY2, UYVY, v308, Y41B, Y42B, Y444, NV12, NV21, A420, YUV9, YVU9, IYU1, GRAY8 }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
+ <details>video/x-raw, format=(string){ BGRx, RGBx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, I420, YV12, AYUV, YUY2, UYVY, v308, Y41B, Y42B, Y444, NV12, NV21, A420, YUV9, YVU9, IYU1, GRAY8 }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, VYUY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
</caps>
<caps>
<name>src</name>
<direction>source</direction>
<presence>always</presence>
- <details>video/x-raw, format=(string){ BGRx, RGBx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, I420, YV12, AYUV, YUY2, UYVY, v308, Y41B, Y42B, Y444, NV12, NV21, A420, YUV9, YVU9, IYU1, GRAY8 }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
+ <details>video/x-raw, format=(string){ BGRx, RGBx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, I420, YV12, AYUV, YUY2, UYVY, v308, Y41B, Y42B, Y444, NV12, NV21, A420, YUV9, YVU9, IYU1, GRAY8 }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, VYUY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
</caps>
</pads>
</element>
<name>video_sink</name>
<direction>sink</direction>
<presence>always</presence>
- <details>video/x-raw, format=(string){ BGRx, RGBx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, I420, YV12, AYUV, YUY2, UYVY, v308, Y41B, Y42B, Y444, NV12, NV21, A420, YUV9, YVU9, IYU1, GRAY8 }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
+ <details>video/x-raw, format=(string){ BGRx, RGBx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, I420, YV12, AYUV, YUY2, UYVY, v308, Y41B, Y42B, Y444, NV12, NV21, A420, YUV9, YVU9, IYU1, GRAY8 }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, VYUY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
</caps>
<caps>
<name>src</name>
<direction>source</direction>
<presence>always</presence>
- <details>video/x-raw, format=(string){ BGRx, RGBx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, I420, YV12, AYUV, YUY2, UYVY, v308, Y41B, Y42B, Y444, NV12, NV21, A420, YUV9, YVU9, IYU1, GRAY8 }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
+ <details>video/x-raw, format=(string){ BGRx, RGBx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, I420, YV12, AYUV, YUY2, UYVY, v308, Y41B, Y42B, Y444, NV12, NV21, A420, YUV9, YVU9, IYU1, GRAY8 }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, VYUY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
</caps>
</pads>
</element>
<description>various playback elements</description>
<filename>../../gst/playback/.libs/libgstplayback.so</filename>
<basename>libgstplayback.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>Subtitle parsing</description>
<filename>../../gst/subparse/.libs/libgstsubparse.so</filename>
<basename>libgstsubparse.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>transfer data over the network via TCP</description>
<filename>../../gst/tcp/.libs/libgsttcp.so</filename>
<basename>libgsttcp.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>Theora plugin library</description>
<filename>../../ext/theora/.libs/libgsttheora.so</filename>
<basename>libgsttheora.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>default typefind functions</description>
<filename>../../gst/typefind/.libs/libgsttypefindfunctions.so</filename>
<basename>libgsttypefindfunctions.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>Colorspace conversion</description>
<filename>../../gst/videoconvert/.libs/libgstvideoconvert.so</filename>
<basename>libgstvideoconvert.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<name>sink</name>
<direction>sink</direction>
<presence>always</presence>
- <details>video/x-raw, format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
+ <details>video/x-raw, format=(string){ I420, YV12, YUY2, UYVY, VYUY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, VYUY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
</caps>
<caps>
<name>src</name>
<direction>source</direction>
<presence>always</presence>
- <details>video/x-raw, format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
+ <details>video/x-raw, format=(string){ I420, YV12, YUY2, UYVY, VYUY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, VYUY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
</caps>
</pads>
</element>
<description>Adjusts video frames</description>
<filename>../../gst/videorate/.libs/libgstvideorate.so</filename>
<basename>libgstvideorate.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>Resizes video</description>
<filename>../../gst/videoscale/.libs/libgstvideoscale.so</filename>
<basename>libgstvideoscale.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<name>sink</name>
<direction>sink</direction>
<presence>always</presence>
- <details>video/x-raw, format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 32767 ], height=(int)[ 1, 32767 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 32767 ], height=(int)[ 1, 32767 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
+ <details>video/x-raw, format=(string){ I420, YV12, YUY2, UYVY, VYUY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 32767 ], height=(int)[ 1, 32767 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, VYUY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 32767 ], height=(int)[ 1, 32767 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
</caps>
<caps>
<name>src</name>
<direction>source</direction>
<presence>always</presence>
- <details>video/x-raw, format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 32767 ], height=(int)[ 1, 32767 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 32767 ], height=(int)[ 1, 32767 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
+ <details>video/x-raw, format=(string){ I420, YV12, YUY2, UYVY, VYUY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 32767 ], height=(int)[ 1, 32767 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-raw(ANY), format=(string){ I420, YV12, YUY2, UYVY, VYUY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 32767 ], height=(int)[ 1, 32767 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
</caps>
</pads>
</element>
<description>Creates a test video stream</description>
<filename>../../gst/videotestsrc/.libs/libgstvideotestsrc.so</filename>
<basename>libgstvideotestsrc.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<name>src</name>
<direction>source</direction>
<presence>always</presence>
- <details>video/x-raw, format=(string){ I420, YV12, YUY2, UYVY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-bayer, format=(string){ bggr, rggb, grbg, gbrg }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
+ <details>video/x-raw, format=(string){ I420, YV12, YUY2, UYVY, VYUY, AYUV, RGBx, BGRx, xRGB, xBGR, RGBA, BGRA, ARGB, ABGR, RGB, BGR, Y41B, Y42B, YVYU, Y444, v210, v216, NV12, NV21, NV16, NV61, NV24, GRAY8, GRAY16_BE, GRAY16_LE, v308, IYU2, RGB16, BGR16, RGB15, BGR15, UYVP, A420, RGB8P, YUV9, YVU9, IYU1, ARGB64, AYUV64, r210, I420_10LE, I420_10BE, I422_10LE, I422_10BE, Y444_10LE, Y444_10BE, GBR, GBR_10LE, GBR_10BE, NV12_64Z32, A420_10LE, A420_10BE, A422_10LE, A422_10BE, A444_10LE, A444_10BE, P010_10LE, P010_10BE }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]; video/x-bayer, format=(string){ bggr, rggb, grbg, gbrg }, width=(int)[ 1, 2147483647 ], height=(int)[ 1, 2147483647 ], framerate=(fraction)[ 0/1, 2147483647/1 ]</details>
</caps>
</pads>
</element>
<description>plugin for controlling audio volume</description>
<filename>../../gst/volume/.libs/libgstvolume.so</filename>
<basename>libgstvolume.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>Vorbis plugin library</description>
<filename>../../ext/vorbis/.libs/libgstvorbis.so</filename>
<basename>libgstvorbis.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>X11 video output element based on standard Xlib calls</description>
<filename>../../sys/ximage/.libs/libgstximagesink.so</filename>
<basename>libgstximagesink.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<description>XFree86 video output plugin using Xv extension</description>
<filename>../../sys/xvimage/.libs/libgstxvimagesink.so</filename>
<basename>libgstxvimagesink.so</basename>
- <version>1.10.0</version>
+ <version>1.11.1</version>
<license>LGPL</license>
<source>gst-plugins-base</source>
<package>GStreamer Base Plug-ins source release</package>
<release>
<Version>
+ <revision>1.11.1</revision>
+ <branch>master</branch>
+ <name></name>
+ <created>2017-01-12</created>
+ <file-release rdf:resource="http://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-1.11.1.tar.xz" />
+ </Version>
+ </release>
+
+ <release>
+ <Version>
<revision>1.10.0</revision>
<branch>master</branch>
<name></name>
projects / platform / upstream / gstreamer.git / commitdiff