md/raid1: don't abort a resync on the first badblock.

If a resync of a RAID1 array with 2 devices finds a known bad block
one device it will neither read from, or write to, that device for
this block offset.
So there will be one read_target (The other device) and zero write
targets.
This condition causes md/raid1 to abort the resync assuming that it
has finished - without known bad blocks this would be true.

When there are no write targets because of the presence of bad blocks
we should only skip over the area covered by the bad block.
RAID10 already gets this right, raid1 doesn't.  Or didn't.

As this can cause a 'sync' to abort early and appear to have succeeded
it could lead to some data corruption, so it suitable for -stable.

Cc: stable@vger.kernel.org
Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 7aa958e..d2361b1 100644 (file)
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -2502,7 +2502,10 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr, int *skipp
                /* There is nowhere to write, so all non-sync
                 * drives must be failed - so we are finished
                 */
-               sector_t rv = max_sector - sector_nr;
+               sector_t rv;
+               if (min_bad > 0)
+                       max_sector = sector_nr + min_bad;
+               rv = max_sector - sector_nr;
                *skipped = 1;
                put_buf(r1_bio);
                return rv;