drivers: reset: Add STM32 reset driver

The STM32 MCUs family IPs can be reset by accessing some registers
from the RCC block.

The list of available reset lines is documented in the DT bindings.

Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 5d65a93..64ebb0c 100644 (file)
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
 obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
 obj-$(CONFIG_ARCH_MESON) += reset-meson.o
+obj-$(CONFIG_ARCH_STM32) += reset-stm32.o
 obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_ARCH_STI) += sti/
 obj-$(CONFIG_ARCH_HISI) += hisilicon/

diff --git a/drivers/reset/reset-stm32.c b/drivers/reset/reset-stm32.c
new file mode 100644 (file)
index 0000000..3a7c852
--- /dev/null
+++ b/drivers/reset/reset-stm32.c
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author:  Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ * License terms:  GNU General Public License (GPL), version 2
+ *
+ * Heavily based on sunxi driver from Maxime Ripard.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+struct stm32_reset_data {
+       spinlock_t                      lock;
+       void __iomem                    *membase;
+       struct reset_controller_dev     rcdev;
+};
+
+static int stm32_reset_assert(struct reset_controller_dev *rcdev,
+                             unsigned long id)
+{
+       struct stm32_reset_data *data = container_of(rcdev,
+                                                    struct stm32_reset_data,
+                                                    rcdev);
+       int bank = id / BITS_PER_LONG;
+       int offset = id % BITS_PER_LONG;
+       unsigned long flags;
+       u32 reg;
+
+       spin_lock_irqsave(&data->lock, flags);
+
+       reg = readl(data->membase + (bank * 4));
+       writel(reg | BIT(offset), data->membase + (bank * 4));
+
+       spin_unlock_irqrestore(&data->lock, flags);
+
+       return 0;
+}
+
+static int stm32_reset_deassert(struct reset_controller_dev *rcdev,
+                               unsigned long id)
+{
+       struct stm32_reset_data *data = container_of(rcdev,
+                                                    struct stm32_reset_data,
+                                                    rcdev);
+       int bank = id / BITS_PER_LONG;
+       int offset = id % BITS_PER_LONG;
+       unsigned long flags;
+       u32 reg;
+
+       spin_lock_irqsave(&data->lock, flags);
+
+       reg = readl(data->membase + (bank * 4));
+       writel(reg & ~BIT(offset), data->membase + (bank * 4));
+
+       spin_unlock_irqrestore(&data->lock, flags);
+
+       return 0;
+}
+
+static const struct reset_control_ops stm32_reset_ops = {
+       .assert         = stm32_reset_assert,
+       .deassert       = stm32_reset_deassert,
+};
+
+static const struct of_device_id stm32_reset_dt_ids[] = {
+        { .compatible = "st,stm32-rcc", },
+        { /* sentinel */ },
+};
+
+static int stm32_reset_probe(struct platform_device *pdev)
+{
+       struct stm32_reset_data *data;
+       struct resource *res;
+
+       data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+       if (!data)
+               return -ENOMEM;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       data->membase = devm_ioremap_resource(&pdev->dev, res);
+       if (IS_ERR(data->membase))
+               return PTR_ERR(data->membase);
+
+       spin_lock_init(&data->lock);
+
+       data->rcdev.owner = THIS_MODULE;
+       data->rcdev.nr_resets = resource_size(res) * 8;
+       data->rcdev.ops = &stm32_reset_ops;
+       data->rcdev.of_node = pdev->dev.of_node;
+
+       return devm_reset_controller_register(&pdev->dev, &data->rcdev);
+}
+
+static struct platform_driver stm32_reset_driver = {
+       .probe  = stm32_reset_probe,
+       .driver = {
+               .name           = "stm32-rcc-reset",
+               .of_match_table = stm32_reset_dt_ids,
+       },
+};
+builtin_platform_driver(stm32_reset_driver);