uli526x: Add suspend and resume routines (updated)

Add suspend/resume support to the uli526x network driver (tested on x86_64,
with 'Ethernet controller: ALi Corporation M5263 Ethernet Controller, rev 40').

This patch is based on the suspend/resume code in the tg3 driver.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index ca2548e..e26ce44 100644 (file)
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -1110,19 +1110,15 @@ static void uli526x_timer(unsigned long data)
 
 
 /*
- *     Dynamic reset the ULI526X board
  *     Stop ULI526X board
  *     Free Tx/Rx allocated memory
- *     Reset ULI526X board
- *     Re-initialize ULI526X board
+ *     Init system variable
  */
 
-static void uli526x_dynamic_reset(struct net_device *dev)
+static void uli526x_reset_prepare(struct net_device *dev)
 {
        struct uli526x_board_info *db = netdev_priv(dev);
 
-       ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
-
        /* Sopt MAC controller */
        db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
        update_cr6(db->cr6_data, dev->base_addr);
@@ -1141,6 +1137,22 @@ static void uli526x_dynamic_reset(struct net_device *dev)
        db->link_failed = 1;
        db->init=1;
        db->wait_reset = 0;
+}
+
+
+/*
+ *     Dynamic reset the ULI526X board
+ *     Stop ULI526X board
+ *     Free Tx/Rx allocated memory
+ *     Reset ULI526X board
+ *     Re-initialize ULI526X board
+ */
+
+static void uli526x_dynamic_reset(struct net_device *dev)
+{
+       ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
+
+       uli526x_reset_prepare(dev);
 
        /* Re-initialize ULI526X board */
        uli526x_init(dev);
@@ -1150,6 +1162,88 @@ static void uli526x_dynamic_reset(struct net_device *dev)
 }
 
 
+#ifdef CONFIG_PM
+
+/*
+ *     Suspend the interface.
+ */
+
+static int uli526x_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+       struct net_device *dev = pci_get_drvdata(pdev);
+       pci_power_t power_state;
+       int err;
+
+       ULI526X_DBUG(0, "uli526x_suspend", 0);
+
+       if (!netdev_priv(dev))
+               return 0;
+
+       pci_save_state(pdev);
+
+       if (!netif_running(dev))
+               return 0;
+
+       netif_device_detach(dev);
+       uli526x_reset_prepare(dev);
+
+       power_state = pci_choose_state(pdev, state);
+       pci_enable_wake(pdev, power_state, 0);
+       err = pci_set_power_state(pdev, power_state);
+       if (err) {
+               netif_device_attach(dev);
+               /* Re-initialize ULI526X board */
+               uli526x_init(dev);
+               /* Restart upper layer interface */
+               netif_wake_queue(dev);
+       }
+
+       return err;
+}
+
+/*
+ *     Resume the interface.
+ */
+
+static int uli526x_resume(struct pci_dev *pdev)
+{
+       struct net_device *dev = pci_get_drvdata(pdev);
+       int err;
+
+       ULI526X_DBUG(0, "uli526x_resume", 0);
+
+       if (!netdev_priv(dev))
+               return 0;
+
+       pci_restore_state(pdev);
+
+       if (!netif_running(dev))
+               return 0;
+
+       err = pci_set_power_state(pdev, PCI_D0);
+       if (err) {
+               printk(KERN_WARNING "%s: Could not put device into D0\n",
+                       dev->name);
+               return err;
+       }
+
+       netif_device_attach(dev);
+       /* Re-initialize ULI526X board */
+       uli526x_init(dev);
+       /* Restart upper layer interface */
+       netif_wake_queue(dev);
+
+       return 0;
+}
+
+#else /* !CONFIG_PM */
+
+#define uli526x_suspend        NULL
+#define uli526x_resume NULL
+
+#endif /* !CONFIG_PM */
+
+
 /*
  *     free all allocated rx buffer
  */
@@ -1689,6 +1783,8 @@ static struct pci_driver uli526x_driver = {
        .id_table       = uli526x_pci_tbl,
        .probe          = uli526x_init_one,
        .remove         = __devexit_p(uli526x_remove_one),
+       .suspend        = uli526x_suspend,
+       .resume         = uli526x_resume,
 };
 
 MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw");