arm: mach-k3: copy bootindex to OCRAM for main domain SPL

Texas Instruments has begun enabling security settings on the SoCs it
produces to instruct ROM and TIFS to begin protecting the Security
Management Subsystem (SMS) from other binaries we load into the chip by
default.

One way ROM and TIFS do this is by enabling firewalls to protect the
OCSRAM and HSM RAM regions they're using during bootup.

The HSM RAM the wakeup SPL is in is firewalled by TIFS to protect
itself from the main domain applications. This means the 'bootindex'
value in HSM RAM, left by ROM to indicate if we're using the primary
or secondary boot-method, must be moved to OCSRAM (that TIFS has open
for us) before we make the jump to the main domain so the main domain's
bootloaders can keep access to this information.

Signed-off-by: Bryan Brattlof <bb@ti.com>

diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index 87da6b4..a8c3a59 100644 (file)
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -69,7 +69,9 @@ config SYS_K3_BOOT_PARAM_TABLE_INDEX
        default 0x41cffbfc if SOC_K3_J721E
        default 0x41cfdbfc if SOC_K3_J721S2
        default 0x701bebfc if SOC_K3_AM642
-       default 0x43c3f290 if SOC_K3_AM625 || SOC_K3_AM62A7
+       default 0x43c3f290 if SOC_K3_AM625
+       default 0x43c3f290 if SOC_K3_AM62A7 && CPU_V7R
+       default 0x7000f290 if SOC_K3_AM62A7 && ARM64
        help
          Address at which ROM stores the value which determines if SPL
          is booted up by primary boot media or secondary boot media.

diff --git a/arch/arm/mach-k3/am62a7_init.c b/arch/arm/mach-k3/am62a7_init.c
index e9569f0..02da24a 100644 (file)
--- a/arch/arm/mach-k3/am62a7_init.c
+++ b/arch/arm/mach-k3/am62a7_init.c
@@ -25,8 +25,11 @@ static struct rom_extended_boot_data bootdata __section(".data");
 static void store_boot_info_from_rom(void)
 {
        bootindex = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX);
-       memcpy(&bootdata, (uintptr_t *)ROM_ENTENDED_BOOT_DATA_INFO,
-              sizeof(struct rom_extended_boot_data));
+
+       if (IS_ENABLED(CONFIG_CPU_V7R)) {
+               memcpy(&bootdata, (uintptr_t *)ROM_ENTENDED_BOOT_DATA_INFO,
+                      sizeof(struct rom_extended_boot_data));
+       }
 }
 
 static void ctrl_mmr_unlock(void)
@@ -123,6 +126,15 @@ void board_init_f(ulong dummy)
        k3_sysfw_loader(true, NULL, NULL);
 #endif
 
+#if defined(CONFIG_CPU_V7R)
+       /*
+        * Relocate boot information to OCRAM (after TIFS has opend this
+        * region for us) so the next bootloader stages can keep access to
+        * primary vs backup bootmodes.
+        */
+       writel(bootindex, K3_BOOT_PARAM_TABLE_INDEX_OCRAM);
+#endif
+
        /*
         * Force probe of clk_k3 driver here to ensure basic default clock
         * configuration is always done.

diff --git a/arch/arm/mach-k3/include/mach/am62a_hardware.h b/arch/arm/mach-k3/include/mach/am62a_hardware.h
index 52b0d9b..13bf50f 100644 (file)
--- a/arch/arm/mach-k3/include/mach/am62a_hardware.h
+++ b/arch/arm/mach-k3/include/mach/am62a_hardware.h
@@ -68,7 +68,22 @@
 
 #define ROM_ENTENDED_BOOT_DATA_INFO            0x43c3f1e0
 
-/* Use Last 2K as Scratch pad */
+#define K3_BOOT_PARAM_TABLE_INDEX_OCRAM         0x7000F290
+
+/*
+ * During the boot process ROM will kill anything that writes to OCSRAM.
+ * This means the wakeup SPL cannot use this region during boot. To
+ * complicate things, TIFS will set a firewall between HSM RAM and the
+ * main domain.
+ *
+ * So, during the wakeup SPL, we will need to store the EEPROM data
+ * somewhere in HSM RAM, and the main domain's SPL will need to store it
+ * somewhere in OCSRAM
+ */
+#ifdef CONFIG_CPU_V7R
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_START     0x43c30000
+#else
 #define TI_SRAM_SCRATCH_BOARD_EEPROM_START     0x70000001
+#endif /* CONFIG_CPU_V7R */
 
 #endif /* __ASM_ARCH_AM62A_HARDWARE_H */