* bfd-in.h (bfd_64_type): Remove.
* libbfd.c (_do_getb64, _do_putb64): Use bfd_vma, not bfd_64_type.
* bfd-in.h (bfd_size): Remove.
* bfd-in.h (bfd_offset): Remove, after fixing ld/ldlang.[ch].
* bfd-in.h (bfd_word): Remove.
* reloc.c (reloc_howto_type): Replace bfd_word with bfd_vma.
* bfd-in.h (rawdata_offset): Remove.
* reloc.c (arelent): Replace rawdata_offset with bfd_size_type.
(bfd_perform_relocation): Lint.
(enum bfd_reloc_status): Comment cleanup.
+Wed Apr 14 20:34:54 1993 John Gilmore (gnu@cygnus.com)
+
+ Cleanup in preparation for better 64-bit host support.
+
+ * bfd-in.h (bfd_64_type): Remove.
+ * libbfd.c (_do_getb64, _do_putb64): Use bfd_vma, not bfd_64_type.
+
+ * bfd-in.h (bfd_size): Remove.
+
+ * bfd-in.h (bfd_offset): Remove, after fixing ld/ldlang.[ch].
+
+ * bfd-in.h (bfd_word): Remove.
+ * reloc.c (reloc_howto_type): Replace bfd_word with bfd_vma.
+
+ * bfd-in.h (rawdata_offset): Remove.
+ * reloc.c (arelent): Replace rawdata_offset with bfd_size_type.
+ (bfd_perform_relocation): Lint.
+ (enum bfd_reloc_status): Comment cleanup.
+
+ * aout-adobe.c, cpu-h8300.c, mipsbsd.c, srec.c: lint -Wall.
+
+Tue Apr 13 11:19:52 1993 Jim Kingdon (kingdon@cygnus.com)
+
+ * aoutf1.h (swapcore_sparc): Guess the right value of USRSTACK.
+
Mon Apr 12 14:18:00 1993 John Gilmore (gnu@cygnus.com)
* elf32.c: Clean up old comments.
from which it was split out. Now 64 bit version is built with a
-DHOST_64_BIT="long long" on the compile line.
-
Fri May 17 19:35:26 1991 Steve Chamberlain (steve at cygint.cygnus.com)
Changed all the [get|put][name] routines to use [get|put]_[size
be called b.out.c * coffcode.h: used to be called coff-code.h, now
64bit ized. * demo64.c: 64 bit a.out back end
-
-
-
-
Thu May 16 16:02:07 1991 Steve Chamberlain (steve at cygint.cygnus.com)
from bothner
* libieee.h: Make ieee_data and ieee_ar_data macros usable
* opncls.c: Define S_IXUSR, S_IXGRP, S_IXOTH if undefined.
* targets.c: Add declaration of newsos3_vec.
-
Mon May 13 10:03:29 1991 Steve Chamberlain (steve at cygint.cygnus.com)
* aout.c: fixxed some of the problems with filepos calculation.
/* Main header file for the bfd library -- portable access to object files.
==> The bfd.h file is generated from bfd-in.h and various .c files; if you
==> change it, your changes will probably be lost.
- Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
Contributed by Cygnus Support.
This file is part of BFD, the Binary File Descriptor library.
/* Support for different sizes of target format ints and addresses */
#ifdef HOST_64_BIT
-typedef HOST_64_BIT rawdata_offset;
typedef HOST_64_BIT bfd_vma;
-typedef HOST_64_BIT bfd_word;
-typedef HOST_64_BIT bfd_offset;
typedef HOST_64_BIT bfd_size_type;
typedef HOST_64_BIT symvalue;
-typedef HOST_64_BIT bfd_64_type;
#define fprintf_vma(s,x) \
fprintf(s,"%08x%08x", uint64_typeHIGH(x), uint64_typeLOW(x))
#else
-typedef struct {int a,b;} bfd_64_type;
-typedef unsigned long rawdata_offset;
typedef unsigned long bfd_vma;
-typedef unsigned long bfd_offset;
-typedef unsigned long bfd_word;
-typedef unsigned long bfd_size;
typedef unsigned long symvalue;
typedef unsigned long bfd_size_type;
#define fprintf_vma(s,x) fprintf(s, "%08lx", x)
#define bfd_is_com_section(ptr) (((ptr)->flags & SEC_IS_COMMON) != 0)
-#define bfd_set_section_vma(bfd, ptr, val) (((ptr)->vma = (val)), ((ptr)->user_set_vma = true), true)
+#define bfd_set_section_vma(bfd, ptr, val) (((ptr)->vma = (ptr)->lma= (val)), ((ptr)->user_set_vma = true), true)
#define bfd_set_section_alignment(bfd, ptr, val) (((ptr)->alignment_power = (val)),true)
#define bfd_set_section_userdata(bfd, ptr, val) (((ptr)->userdata = (val)),true)
CAT(NAME,_bfd_debug_info_accumulate),\
CAT(NAME,_bfd_get_relocated_section_contents),\
CAT(NAME,_bfd_relax_section),\
-CAT(NAME,_bfd_seclet_link)
+CAT(NAME,_bfd_seclet_link),\
+CAT(NAME,_bfd_reloc_type_lookup),\
+CAT(NAME,_bfd_make_debug_symbol)
#define COFF_SWAP_TABLE (PTR) &bfd_coff_std_swap_table
if (direction == SEEK_CUR && position == 0)
return 0;
#ifdef FILE_OFFSET_IS_CHAR_INDEX
- if (direction == SEEK_SET && position == abfd->where)
- return 0;
+ if (abfd->format != bfd_archive && abfd->my_archive == 0)
+ {
+#ifndef NDEBUG
+ /* Explanation for this code: I'm only about 95+% sure that the above
+ conditions are sufficient and that all i/o calls are properly
+ adjusting the `where' field. So this is sort of an `assert'
+ that the `where' field is correct. If we can go a while without
+ tripping the abort, we can probably safely disable this code,
+ so that the real optimizations happen. */
+ file_ptr where_am_i_now;
+ where_am_i_now = ftell (bfd_cache_lookup (abfd));
+ if (abfd->my_archive)
+ where_am_i_now -= abfd->origin;
+ if (where_am_i_now != abfd->where)
+ abort ();
+#endif
+ if (direction == SEEK_SET && position == abfd->where)
+ return 0;
+ }
+ else
+ {
+ /* We need something smarter to optimize access to archives.
+ Currently, anything inside an archive is read via the file
+ handle for the archive. Which means that a bfd_seek on one
+ component affects the `current position' in the archive, as
+ well as in any other component.
+
+ It might be sufficient to put a spike through the cache
+ abstraction, and look to the archive for the file position,
+ but I think we should try for something cleaner.
+
+ In the meantime, no optimization for archives. */
+ }
#endif
f = bfd_cache_lookup (abfd);
register bfd_byte *addr)
{
#ifdef HOST_64_BIT
- bfd_64_type low, high;
+ bfd_vma low, high;
high= ((((((((addr[0]) << 8) |
addr[1]) << 8) |
{
#ifdef HOST_64_BIT
- bfd_64_type low, high;
+ bfd_vma low, high;
high= (((((((addr[7] << 8) |
addr[6]) << 8) |
addr[5]) << 8) |
projects / external / binutils.git / commitdiff