-# DVM
-obj-$(CONFIG_IWLDVM) += iwldvm.o
-iwldvm-objs := iwl-agn.o iwl-agn-rs.o iwl-mac80211.o
-iwldvm-objs += iwl-ucode.o iwl-agn-tx.o
-iwldvm-objs += iwl-agn-lib.o iwl-agn-calib.o
-iwldvm-objs += iwl-agn-tt.o iwl-agn-sta.o iwl-agn-rx.o
-iwldvm-objs += iwl-eeprom.o iwl-power.o
-iwldvm-objs += iwl-scan.o iwl-led.o
-iwldvm-objs += iwl-agn-rxon.o iwl-agn-devices.o
-
-iwldvm-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
-iwldvm-$(CONFIG_IWLWIFI_DEVICE_TESTMODE) += iwl-testmode.o
+obj-$(CONFIG_IWLDVM) += dvm/
CFLAGS_iwl-devtrace.o := -I$(src)
-# WIFI
+# common
obj-$(CONFIG_IWLWIFI) += iwlwifi.o
-iwlwifi-objs += iwl-5000.o
-iwlwifi-objs += iwl-6000.o
-iwlwifi-objs += iwl-1000.o
-iwlwifi-objs += iwl-2000.o
iwlwifi-objs += iwl-io.o
-iwlwifi-objs += iwl-pci.o
iwlwifi-objs += iwl-drv.o
iwlwifi-objs += iwl-debug.o
iwlwifi-objs += iwl-notif-wait.o
-iwlwifi-objs += iwl-trans-pcie.o iwl-trans-pcie-rx.o iwl-trans-pcie-tx.o
+iwlwifi-objs += iwl-eeprom-read.o iwl-eeprom-parse.o
+iwlwifi-objs += pcie/drv.o pcie/rx.o pcie/tx.o pcie/trans.o
+iwlwifi-objs += pcie/1000.o pcie/2000.o pcie/5000.o pcie/6000.o
iwlwifi-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
-ccflags-y += -D__CHECK_ENDIAN__
+ccflags-y += -D__CHECK_ENDIAN__ -I$(src)
--- /dev/null
+# DVM
+obj-$(CONFIG_IWLDVM) += iwldvm.o
+iwldvm-objs += main.o rs.o mac80211.o ucode.o tx.o
+iwldvm-objs += lib.o calib.o tt.o sta.o rx.o
+
+iwldvm-objs += power.o
+iwldvm-objs += scan.o led.o
+iwldvm-objs += rxon.o devices.o
+
+iwldvm-$(CONFIG_IWLWIFI_DEBUGFS) += debugfs.o
+iwldvm-$(CONFIG_IWLWIFI_DEVICE_TESTMODE) += testmode.o
+
+ccflags-y += -D__CHECK_ENDIAN__ -I$(src)/../
#ifndef __iwl_agn_h__
#define __iwl_agn_h__
-#include "iwl-dev.h"
#include "iwl-config.h"
+#include "dev.h"
+
/* The first 11 queues (0-10) are used otherwise */
#define IWLAGN_FIRST_AMPDU_QUEUE 11
#define STATUS_CT_KILL 1
#define STATUS_ALIVE 2
#define STATUS_READY 3
-#define STATUS_GEO_CONFIGURED 4
#define STATUS_EXIT_PENDING 5
#define STATUS_STATISTICS 6
#define STATUS_SCANNING 7
#define STATUS_CHANNEL_SWITCH_PENDING 11
#define STATUS_SCAN_COMPLETE 12
#define STATUS_POWER_PMI 13
+#define STATUS_SCAN_ROC_EXPIRED 14
struct iwl_ucode_capabilities;
enum iwl_scan_type scan_type,
enum ieee80211_band band);
+void iwl_scan_roc_expired(struct iwl_priv *priv);
+void iwl_scan_offchannel_skb(struct iwl_priv *priv);
+void iwl_scan_offchannel_skb_status(struct iwl_priv *priv);
+
/* For faster active scanning, scan will move to the next channel if fewer than
* PLCP_QUIET_THRESH packets are heard on this channel within
* ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
static inline int iwl_is_ready(struct iwl_priv *priv)
{
- /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
- * set but EXIT_PENDING is not */
+ /* The adapter is 'ready' if READY EXIT_PENDING is not set */
return test_bit(STATUS_READY, &priv->status) &&
- test_bit(STATUS_GEO_CONFIGURED, &priv->status) &&
!test_bit(STATUS_EXIT_PENDING, &priv->status);
}
return s;
return "UNKNOWN";
}
-
-/* API method exported for mvm hybrid state */
-void iwl_setup_deferred_work(struct iwl_priv *priv);
-int iwl_send_wimax_coex(struct iwl_priv *priv);
-int iwl_send_bt_env(struct iwl_priv *priv, u8 action, u8 type);
-void iwl_option_config(struct iwl_priv *priv);
-void iwl_set_hw_params(struct iwl_priv *priv);
-void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags);
-int iwl_init_drv(struct iwl_priv *priv);
-void iwl_uninit_drv(struct iwl_priv *priv);
-void iwl_send_bt_config(struct iwl_priv *priv);
-void iwl_rf_kill_ct_config(struct iwl_priv *priv);
-int iwl_setup_interface(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
-void iwl_teardown_interface(struct iwl_priv *priv,
- struct ieee80211_vif *vif,
- bool mode_change);
-int iwl_full_rxon_required(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
-void iwlagn_update_qos(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
-void iwlagn_check_needed_chains(struct iwl_priv *priv,
- struct iwl_rxon_context *ctx,
- struct ieee80211_bss_conf *bss_conf);
-void iwlagn_chain_noise_reset(struct iwl_priv *priv);
-int iwlagn_update_beacon(struct iwl_priv *priv,
- struct ieee80211_vif *vif);
-void iwl_tt_handler(struct iwl_priv *priv);
-void iwl_op_mode_dvm_stop(struct iwl_op_mode *op_mode);
-void iwl_stop_sw_queue(struct iwl_op_mode *op_mode, int queue);
-void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state);
-void iwl_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb);
-void iwl_nic_error(struct iwl_op_mode *op_mode);
-void iwl_cmd_queue_full(struct iwl_op_mode *op_mode);
-void iwl_nic_config(struct iwl_op_mode *op_mode);
-int iwlagn_mac_set_tim(struct ieee80211_hw *hw,
- struct ieee80211_sta *sta, bool set);
-void iwlagn_mac_rssi_callback(struct ieee80211_hw *hw,
- enum ieee80211_rssi_event rssi_event);
-int iwlagn_mac_cancel_remain_on_channel(struct ieee80211_hw *hw);
-int iwlagn_mac_tx_last_beacon(struct ieee80211_hw *hw);
-void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop);
-void iwl_wake_sw_queue(struct iwl_op_mode *op_mode, int queue);
-void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
- struct ieee80211_channel_switch *ch_switch);
-int iwlagn_mac_sta_state(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta,
- enum ieee80211_sta_state old_state,
- enum ieee80211_sta_state new_state);
-int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- enum ieee80211_ampdu_mlme_action action,
- struct ieee80211_sta *sta, u16 tid, u16 *ssn,
- u8 buf_size);
-int iwlagn_mac_hw_scan(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct cfg80211_scan_request *req);
-void iwlagn_mac_sta_notify(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- enum sta_notify_cmd cmd,
- struct ieee80211_sta *sta);
-void iwlagn_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *total_flags,
- u64 multicast);
-int iwlagn_mac_conf_tx(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif, u16 queue,
- const struct ieee80211_tx_queue_params *params);
-void iwlagn_mac_set_rekey_data(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct cfg80211_gtk_rekey_data *data);
-void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_key_conf *keyconf,
- struct ieee80211_sta *sta,
- u32 iv32, u16 *phase1key);
-int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta,
- struct ieee80211_key_conf *key);
-void iwlagn_mac_stop(struct ieee80211_hw *hw);
-void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
-int iwlagn_mac_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan);
#endif /* __iwl_agn_h__ */
#include <linux/slab.h>
#include <net/mac80211.h>
-#include "iwl-dev.h"
-#include "iwl-agn-calib.h"
#include "iwl-trans.h"
-#include "iwl-agn.h"
+
+#include "dev.h"
+#include "calib.h"
+#include "agn.h"
/*****************************************************************************
* INIT calibrations framework
* To be safe, simply mask out any chains that we know
* are not on the device.
*/
- active_chains &= priv->hw_params.valid_rx_ant;
+ active_chains &= priv->eeprom_data->valid_rx_ant;
num_tx_chains = 0;
for (i = 0; i < NUM_RX_CHAINS; i++) {
/* loops on all the bits of
* priv->hw_setting.valid_tx_ant */
u8 ant_msk = (1 << i);
- if (!(priv->hw_params.valid_tx_ant & ant_msk))
+ if (!(priv->eeprom_data->valid_tx_ant & ant_msk))
continue;
num_tx_chains++;
* connect the first valid tx chain
*/
first_chain =
- find_first_chain(priv->hw_params.valid_tx_ant);
+ find_first_chain(priv->eeprom_data->valid_tx_ant);
data->disconn_array[first_chain] = 0;
active_chains |= BIT(first_chain);
IWL_DEBUG_CALIB(priv,
}
}
- if (active_chains != priv->hw_params.valid_rx_ant &&
+ if (active_chains != priv->eeprom_data->valid_rx_ant &&
active_chains != priv->chain_noise_data.active_chains)
IWL_DEBUG_CALIB(priv,
"Detected that not all antennas are connected! "
"Connected: %#x, valid: %#x.\n",
active_chains,
- priv->hw_params.valid_rx_ant);
+ priv->eeprom_data->valid_rx_ant);
/* Save for use within RXON, TX, SCAN commands, etc. */
data->active_chains = active_chains;
priv->cfg->bt_params->advanced_bt_coexist) {
/* Disable disconnected antenna algorithm for advanced
bt coex, assuming valid antennas are connected */
- data->active_chains = priv->hw_params.valid_rx_ant;
+ data->active_chains = priv->eeprom_data->valid_rx_ant;
for (i = 0; i < NUM_RX_CHAINS; i++)
if (!(data->active_chains & (1<<i)))
data->disconn_array[i] = 1;
IWL_DEBUG_CALIB(priv, "min_average_noise = %d, antenna %d\n",
min_average_noise, min_average_noise_antenna_i);
- iwlagn_gain_computation(priv, average_noise,
- find_first_chain(priv->hw_params.valid_rx_ant));
+ iwlagn_gain_computation(
+ priv, average_noise,
+ find_first_chain(priv->eeprom_data->valid_rx_ant));
/* Some power changes may have been made during the calibration.
* Update and commit the RXON
#ifndef __iwl_calib_h__
#define __iwl_calib_h__
-#include "iwl-dev.h"
-#include "iwl-commands.h"
+#include "dev.h"
+#include "commands.h"
void iwl_chain_noise_calibration(struct iwl_priv *priv);
void iwl_sensitivity_calibration(struct iwl_priv *priv);
*
*****************************************************************************/
/*
- * Please use this file (iwl-commands.h) only for uCode API definitions.
+ * Please use this file (commands.h) only for uCode API definitions.
* Please use iwl-xxxx-hw.h for hardware-related definitions.
- * Please use iwl-dev.h for driver implementation definitions.
+ * Please use dev.h for driver implementation definitions.
*/
#ifndef __iwl_commands_h__
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/debugfs.h>
-
#include <linux/ieee80211.h>
#include <net/mac80211.h>
-
-
-#include "iwl-dev.h"
#include "iwl-debug.h"
#include "iwl-io.h"
-#include "iwl-agn.h"
-#include "iwl-modparams.h"
+#include "dev.h"
+#include "agn.h"
/* create and remove of files */
#define DEBUGFS_ADD_FILE(name, parent, mode) do { \
const u8 *ptr;
char *buf;
u16 eeprom_ver;
- size_t eeprom_len = priv->cfg->base_params->eeprom_size;
+ size_t eeprom_len = priv->eeprom_blob_size;
buf_size = 4 * eeprom_len + 256;
if (eeprom_len % 16)
return -ENODATA;
- ptr = priv->eeprom;
+ ptr = priv->eeprom_blob;
if (!ptr)
return -ENOMEM;
if (!buf)
return -ENOMEM;
- eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
- pos += scnprintf(buf + pos, buf_size - pos, "NVM Type: %s, "
- "version: 0x%x\n",
- (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
- ? "OTP" : "EEPROM", eeprom_ver);
+ eeprom_ver = priv->eeprom_data->eeprom_version;
+ pos += scnprintf(buf + pos, buf_size - pos,
+ "NVM version: 0x%x\n", eeprom_ver);
for (ofs = 0 ; ofs < eeprom_len ; ofs += 16) {
pos += scnprintf(buf + pos, buf_size - pos, "0x%.4x ", ofs);
hex_dump_to_buffer(ptr + ofs, 16 , 16, 2, buf + pos,
char *buf;
ssize_t ret;
- if (!test_bit(STATUS_GEO_CONFIGURED, &priv->status))
- return -EAGAIN;
-
buf = kzalloc(bufsz, GFP_KERNEL);
if (!buf)
return -ENOMEM;
test_bit(STATUS_ALIVE, &priv->status));
pos += scnprintf(buf + pos, bufsz - pos, "STATUS_READY:\t\t %d\n",
test_bit(STATUS_READY, &priv->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_GEO_CONFIGURED:\t %d\n",
- test_bit(STATUS_GEO_CONFIGURED, &priv->status));
pos += scnprintf(buf + pos, bufsz - pos, "STATUS_EXIT_PENDING:\t %d\n",
test_bit(STATUS_EXIT_PENDING, &priv->status));
pos += scnprintf(buf + pos, bufsz - pos, "STATUS_STATISTICS:\t %d\n",
if (tx->tx_power.ant_a || tx->tx_power.ant_b || tx->tx_power.ant_c) {
pos += scnprintf(buf + pos, bufsz - pos,
"tx power: (1/2 dB step)\n");
- if ((priv->hw_params.valid_tx_ant & ANT_A) &&
+ if ((priv->eeprom_data->valid_tx_ant & ANT_A) &&
tx->tx_power.ant_a)
pos += scnprintf(buf + pos, bufsz - pos,
fmt_hex, "antenna A:",
tx->tx_power.ant_a);
- if ((priv->hw_params.valid_tx_ant & ANT_B) &&
+ if ((priv->eeprom_data->valid_tx_ant & ANT_B) &&
tx->tx_power.ant_b)
pos += scnprintf(buf + pos, bufsz - pos,
fmt_hex, "antenna B:",
tx->tx_power.ant_b);
- if ((priv->hw_params.valid_tx_ant & ANT_C) &&
+ if ((priv->eeprom_data->valid_tx_ant & ANT_C) &&
tx->tx_power.ant_c)
pos += scnprintf(buf + pos, bufsz - pos,
fmt_hex, "antenna C:",
*
*****************************************************************************/
/*
- * Please use this file (iwl-dev.h) for driver implementation definitions.
- * Please use iwl-commands.h for uCode API definitions.
+ * Please use this file (dev.h) for driver implementation definitions.
+ * Please use commands.h for uCode API definitions.
*/
#ifndef __iwl_dev_h__
#include <linux/mutex.h>
#include "iwl-fw.h"
-#include "iwl-eeprom.h"
+#include "iwl-eeprom-parse.h"
#include "iwl-csr.h"
#include "iwl-debug.h"
#include "iwl-agn-hw.h"
-#include "iwl-led.h"
-#include "iwl-power.h"
-#include "iwl-agn-rs.h"
-#include "iwl-agn-tt.h"
-#include "iwl-trans.h"
#include "iwl-op-mode.h"
#include "iwl-notif-wait.h"
+#include "iwl-trans.h"
+
+#include "led.h"
+#include "power.h"
+#include "rs.h"
+#include "tt.h"
/* CT-KILL constants */
#define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */
#define IWL_NUM_SCAN_RATES (2)
/*
- * One for each channel, holds all channel setup data
- * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
- * with one another!
- */
-struct iwl_channel_info {
- struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */
- struct iwl_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for
- * HT40 channel */
-
- u8 channel; /* channel number */
- u8 flags; /* flags copied from EEPROM */
- s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
- s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */
- s8 min_power; /* always 0 */
- s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */
-
- u8 group_index; /* 0-4, maps channel to group1/2/3/4/5 */
- u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */
- enum ieee80211_band band;
-
- /* HT40 channel info */
- s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
- u8 ht40_flags; /* flags copied from EEPROM */
- u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
-};
-
-/*
* Minimum number of queues. MAX_NUM is defined in hw specific files.
* Set the minimum to accommodate
* - 4 standard TX queues
};
};
-#define CFG_HT_RX_AMPDU_FACTOR_8K (0x0)
-#define CFG_HT_RX_AMPDU_FACTOR_16K (0x1)
-#define CFG_HT_RX_AMPDU_FACTOR_32K (0x2)
-#define CFG_HT_RX_AMPDU_FACTOR_64K (0x3)
-#define CFG_HT_RX_AMPDU_FACTOR_DEF CFG_HT_RX_AMPDU_FACTOR_64K
-#define CFG_HT_RX_AMPDU_FACTOR_MAX CFG_HT_RX_AMPDU_FACTOR_64K
-#define CFG_HT_RX_AMPDU_FACTOR_MIN CFG_HT_RX_AMPDU_FACTOR_8K
-
-/*
- * Maximal MPDU density for TX aggregation
- * 4 - 2us density
- * 5 - 4us density
- * 6 - 8us density
- * 7 - 16us density
- */
-#define CFG_HT_MPDU_DENSITY_2USEC (0x4)
-#define CFG_HT_MPDU_DENSITY_4USEC (0x5)
-#define CFG_HT_MPDU_DENSITY_8USEC (0x6)
-#define CFG_HT_MPDU_DENSITY_16USEC (0x7)
-#define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
-#define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC
-#define CFG_HT_MPDU_DENSITY_MIN (0x1)
-
struct iwl_ht_config {
bool single_chain_sufficient;
enum ieee80211_smps_mode smps; /* current smps mode */
MEASUREMENT_ACTIVE = (1 << 1),
};
-enum iwl_nvm_type {
- NVM_DEVICE_TYPE_EEPROM = 0,
- NVM_DEVICE_TYPE_OTP,
-};
-
-/*
- * Two types of OTP memory access modes
- * IWL_OTP_ACCESS_ABSOLUTE - absolute address mode,
- * based on physical memory addressing
- * IWL_OTP_ACCESS_RELATIVE - relative address mode,
- * based on logical memory addressing
- */
-enum iwl_access_mode {
- IWL_OTP_ACCESS_ABSOLUTE,
- IWL_OTP_ACCESS_RELATIVE,
-};
-
/* reply_tx_statistics (for _agn devices) */
struct reply_tx_error_statistics {
u32 pp_delay;
*
* @tx_chains_num: Number of TX chains
* @rx_chains_num: Number of RX chains
- * @valid_tx_ant: usable antennas for TX
- * @valid_rx_ant: usable antennas for RX
- * @ht40_channel: is 40MHz width possible: BIT(IEEE80211_BAND_XXX)
* @sku: sku read from EEPROM
* @ct_kill_threshold: temperature threshold - in hw dependent unit
* @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit
struct iwl_hw_params {
u8 tx_chains_num;
u8 rx_chains_num;
- u8 valid_tx_ant;
- u8 valid_rx_ant;
- u8 ht40_channel;
bool use_rts_for_aggregation;
u16 sku;
u32 ct_kill_threshold;
/* device specific configuration */
void (*nic_config)(struct iwl_priv *priv);
- /* eeprom operations (as defined in iwl-eeprom.h) */
- struct iwl_eeprom_ops eeprom_ops;
-
/* temperature */
void (*temperature)(struct iwl_priv *priv);
};
/* ieee device used by generic ieee processing code */
struct ieee80211_hw *hw;
- struct ieee80211_channel *ieee_channels;
- struct ieee80211_rate *ieee_rates;
struct list_head calib_results;
struct iwl_notif_wait_data notif_wait;
- struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
-
/* spectrum measurement report caching */
struct iwl_spectrum_notification measure_report;
u8 measurement_status;
bool ucode_loaded;
bool init_ucode_run; /* Don't run init uCode again */
- /* we allocate array of iwl_channel_info for NIC's valid channels.
- * Access via channel # using indirect index array */
- struct iwl_channel_info *channel_info; /* channel info array */
- u8 channel_count; /* # of channels */
-
u8 plcp_delta_threshold;
/* thermal calibration */
struct iwl_station_entry stations[IWLAGN_STATION_COUNT];
unsigned long ucode_key_table;
struct iwl_tid_data tid_data[IWLAGN_STATION_COUNT][IWL_MAX_TID_COUNT];
+ atomic_t num_aux_in_flight;
u8 mac80211_registered;
struct delayed_work scan_check;
- /* TX Power */
+ /* TX Power settings */
s8 tx_power_user_lmt;
- s8 tx_power_device_lmt;
- s8 tx_power_lmt_in_half_dbm; /* max tx power in half-dBm format */
s8 tx_power_next;
#ifdef CONFIG_IWLWIFI_DEBUGFS
void *wowlan_sram;
#endif /* CONFIG_IWLWIFI_DEBUGFS */
- /* eeprom -- this is in the card's little endian byte order */
- u8 *eeprom;
- enum iwl_nvm_type nvm_device_type;
+ struct iwl_eeprom_data *eeprom_data;
+ /* eeprom blob for debugfs/testmode */
+ u8 *eeprom_blob;
+ size_t eeprom_blob_size;
struct work_struct txpower_work;
u32 calib_disabled;
enum iwl_ucode_type cur_ucode;
}; /*iwl_priv */
-extern struct kmem_cache *iwl_tx_cmd_pool;
-
static inline struct iwl_rxon_context *
iwl_rxon_ctx_from_vif(struct ieee80211_vif *vif)
{
return false;
}
-static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
-{
- if (ch_info == NULL)
- return 0;
- return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
-}
-
-static inline int is_channel_radar(const struct iwl_channel_info *ch_info)
-{
- return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
-}
-
-static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info)
-{
- return ch_info->band == IEEE80211_BAND_5GHZ;
-}
-
-static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info)
-{
- return ch_info->band == IEEE80211_BAND_2GHZ;
-}
-
-static inline int is_channel_passive(const struct iwl_channel_info *ch)
-{
- return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
-}
-
-static inline int is_channel_ibss(const struct iwl_channel_info *ch)
-{
- return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
-}
-
#endif /* __iwl_dev_h__ */
/*
* DVM device-specific data & functions
*/
-#include "iwl-agn.h"
-#include "iwl-dev.h"
-#include "iwl-commands.h"
#include "iwl-io.h"
#include "iwl-prph.h"
+#include "iwl-eeprom-parse.h"
+
+#include "agn.h"
+#include "dev.h"
+#include "commands.h"
+
/*
* 1000 series
/* NIC configuration for 1000 series */
static void iwl1000_nic_config(struct iwl_priv *priv)
{
- /* set CSR_HW_CONFIG_REG for uCode use */
- iwl_set_bit(priv->trans, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
- CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
-
/* Setting digital SVR for 1000 card to 1.32V */
/* locking is acquired in iwl_set_bits_mask_prph() function */
iwl_set_bits_mask_prph(priv->trans, APMG_DIGITAL_SVR_REG,
static void iwl1000_hw_set_hw_params(struct iwl_priv *priv)
{
- priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ);
-
- priv->hw_params.tx_chains_num =
- num_of_ant(priv->hw_params.valid_tx_ant);
- if (priv->cfg->rx_with_siso_diversity)
- priv->hw_params.rx_chains_num = 1;
- else
- priv->hw_params.rx_chains_num =
- num_of_ant(priv->hw_params.valid_rx_ant);
-
iwl1000_set_ct_threshold(priv);
/* Set initial sensitivity parameters */
struct iwl_lib_ops iwl1000_lib = {
.set_hw_params = iwl1000_hw_set_hw_params,
.nic_config = iwl1000_nic_config,
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REG_BAND_1_CHANNELS,
- EEPROM_REG_BAND_2_CHANNELS,
- EEPROM_REG_BAND_3_CHANNELS,
- EEPROM_REG_BAND_4_CHANNELS,
- EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REGULATORY_BAND_NO_HT40,
- },
- },
.temperature = iwlagn_temperature,
};
/* NIC configuration for 2000 series */
static void iwl2000_nic_config(struct iwl_priv *priv)
{
- iwl_rf_config(priv);
-
iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER);
}
static void iwl2000_hw_set_hw_params(struct iwl_priv *priv)
{
- priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ);
-
- priv->hw_params.tx_chains_num =
- num_of_ant(priv->hw_params.valid_tx_ant);
- if (priv->cfg->rx_with_siso_diversity)
- priv->hw_params.rx_chains_num = 1;
- else
- priv->hw_params.rx_chains_num =
- num_of_ant(priv->hw_params.valid_rx_ant);
-
iwl2000_set_ct_threshold(priv);
/* Set initial sensitivity parameters */
struct iwl_lib_ops iwl2000_lib = {
.set_hw_params = iwl2000_hw_set_hw_params,
.nic_config = iwl2000_nic_config,
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REG_BAND_1_CHANNELS,
- EEPROM_REG_BAND_2_CHANNELS,
- EEPROM_REG_BAND_3_CHANNELS,
- EEPROM_REG_BAND_4_CHANNELS,
- EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REGULATORY_BAND_NO_HT40,
- },
- .enhanced_txpower = true,
- },
.temperature = iwlagn_temperature,
};
struct iwl_lib_ops iwl2030_lib = {
.set_hw_params = iwl2000_hw_set_hw_params,
.nic_config = iwl2000_nic_config,
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REG_BAND_1_CHANNELS,
- EEPROM_REG_BAND_2_CHANNELS,
- EEPROM_REG_BAND_3_CHANNELS,
- EEPROM_REG_BAND_4_CHANNELS,
- EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REGULATORY_BAND_NO_HT40,
- },
- .enhanced_txpower = true,
- },
.temperature = iwlagn_temperature,
};
/* NIC configuration for 5000 series */
static void iwl5000_nic_config(struct iwl_priv *priv)
{
- iwl_rf_config(priv);
-
/* W/A : NIC is stuck in a reset state after Early PCIe power off
* (PCIe power is lost before PERST# is asserted),
* causing ME FW to lose ownership and not being able to obtain it back.
static s32 iwl_temp_calib_to_offset(struct iwl_priv *priv)
{
u16 temperature, voltage;
- __le16 *temp_calib = (__le16 *)iwl_eeprom_query_addr(priv,
- EEPROM_KELVIN_TEMPERATURE);
- temperature = le16_to_cpu(temp_calib[0]);
- voltage = le16_to_cpu(temp_calib[1]);
+ temperature = le16_to_cpu(priv->eeprom_data->kelvin_temperature);
+ voltage = le16_to_cpu(priv->eeprom_data->kelvin_voltage);
/* offset = temp - volt / coeff */
return (s32)(temperature -
static void iwl5000_hw_set_hw_params(struct iwl_priv *priv)
{
- priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
- BIT(IEEE80211_BAND_5GHZ);
-
- priv->hw_params.tx_chains_num =
- num_of_ant(priv->hw_params.valid_tx_ant);
- priv->hw_params.rx_chains_num =
- num_of_ant(priv->hw_params.valid_rx_ant);
-
iwl5000_set_ct_threshold(priv);
/* Set initial sensitivity parameters */
static void iwl5150_hw_set_hw_params(struct iwl_priv *priv)
{
- priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
- BIT(IEEE80211_BAND_5GHZ);
-
- priv->hw_params.tx_chains_num =
- num_of_ant(priv->hw_params.valid_tx_ant);
- priv->hw_params.rx_chains_num =
- num_of_ant(priv->hw_params.valid_rx_ant);
-
iwl5150_set_ct_threshold(priv);
/* Set initial sensitivity parameters */
*/
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct iwl5000_channel_switch_cmd cmd;
- const struct iwl_channel_info *ch_info;
u32 switch_time_in_usec, ucode_switch_time;
u16 ch;
u32 tsf_low;
}
IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
cmd.switch_time);
- ch_info = iwl_get_channel_info(priv, priv->band, ch);
- if (ch_info)
- cmd.expect_beacon = is_channel_radar(ch_info);
- else {
- IWL_ERR(priv, "invalid channel switch from %u to %u\n",
- ctx->active.channel, ch);
- return -EFAULT;
- }
+ cmd.expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR;
return iwl_dvm_send_cmd(priv, &hcmd);
}
.set_hw_params = iwl5000_hw_set_hw_params,
.set_channel_switch = iwl5000_hw_channel_switch,
.nic_config = iwl5000_nic_config,
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REG_BAND_1_CHANNELS,
- EEPROM_REG_BAND_2_CHANNELS,
- EEPROM_REG_BAND_3_CHANNELS,
- EEPROM_REG_BAND_4_CHANNELS,
- EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REG_BAND_52_HT40_CHANNELS
- },
- },
.temperature = iwlagn_temperature,
};
.set_hw_params = iwl5150_hw_set_hw_params,
.set_channel_switch = iwl5000_hw_channel_switch,
.nic_config = iwl5000_nic_config,
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REG_BAND_1_CHANNELS,
- EEPROM_REG_BAND_2_CHANNELS,
- EEPROM_REG_BAND_3_CHANNELS,
- EEPROM_REG_BAND_4_CHANNELS,
- EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REG_BAND_52_HT40_CHANNELS
- },
- },
.temperature = iwl5150_temperature,
};
/* NIC configuration for 6000 series */
static void iwl6000_nic_config(struct iwl_priv *priv)
{
- iwl_rf_config(priv);
-
switch (priv->cfg->device_family) {
case IWL_DEVICE_FAMILY_6005:
case IWL_DEVICE_FAMILY_6030:
break;
case IWL_DEVICE_FAMILY_6050:
/* Indicate calibration version to uCode. */
- if (iwl_eeprom_calib_version(priv) >= 6)
+ if (priv->eeprom_data->calib_version >= 6)
iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
break;
case IWL_DEVICE_FAMILY_6150:
/* Indicate calibration version to uCode. */
- if (iwl_eeprom_calib_version(priv) >= 6)
+ if (priv->eeprom_data->calib_version >= 6)
iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
static void iwl6000_hw_set_hw_params(struct iwl_priv *priv)
{
- priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
- BIT(IEEE80211_BAND_5GHZ);
-
- priv->hw_params.tx_chains_num =
- num_of_ant(priv->hw_params.valid_tx_ant);
- if (priv->cfg->rx_with_siso_diversity)
- priv->hw_params.rx_chains_num = 1;
- else
- priv->hw_params.rx_chains_num =
- num_of_ant(priv->hw_params.valid_rx_ant);
-
iwl6000_set_ct_threshold(priv);
/* Set initial sensitivity parameters */
*/
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct iwl6000_channel_switch_cmd cmd;
- const struct iwl_channel_info *ch_info;
u32 switch_time_in_usec, ucode_switch_time;
u16 ch;
u32 tsf_low;
}
IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
cmd.switch_time);
- ch_info = iwl_get_channel_info(priv, priv->band, ch);
- if (ch_info)
- cmd.expect_beacon = is_channel_radar(ch_info);
- else {
- IWL_ERR(priv, "invalid channel switch from %u to %u\n",
- ctx->active.channel, ch);
- return -EFAULT;
- }
+ cmd.expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR;
return iwl_dvm_send_cmd(priv, &hcmd);
}
.set_hw_params = iwl6000_hw_set_hw_params,
.set_channel_switch = iwl6000_hw_channel_switch,
.nic_config = iwl6000_nic_config,
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REG_BAND_1_CHANNELS,
- EEPROM_REG_BAND_2_CHANNELS,
- EEPROM_REG_BAND_3_CHANNELS,
- EEPROM_REG_BAND_4_CHANNELS,
- EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REG_BAND_52_HT40_CHANNELS
- },
- .enhanced_txpower = true,
- },
.temperature = iwlagn_temperature,
};
.set_hw_params = iwl6000_hw_set_hw_params,
.set_channel_switch = iwl6000_hw_channel_switch,
.nic_config = iwl6000_nic_config,
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REG_BAND_1_CHANNELS,
- EEPROM_REG_BAND_2_CHANNELS,
- EEPROM_REG_BAND_3_CHANNELS,
- EEPROM_REG_BAND_4_CHANNELS,
- EEPROM_REG_BAND_5_CHANNELS,
- EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
- EEPROM_REG_BAND_52_HT40_CHANNELS
- },
- .enhanced_txpower = true,
- },
.temperature = iwlagn_temperature,
};
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
-
-#include "iwl-dev.h"
-#include "iwl-agn.h"
#include "iwl-io.h"
#include "iwl-trans.h"
#include "iwl-modparams.h"
+#include "dev.h"
+#include "agn.h"
/* Throughput OFF time(ms) ON time (ms)
* >300 25 25
#include <linux/sched.h>
#include <net/mac80211.h>
-#include "iwl-dev.h"
#include "iwl-io.h"
#include "iwl-agn-hw.h"
-#include "iwl-agn.h"
#include "iwl-trans.h"
#include "iwl-modparams.h"
+#include "dev.h"
+#include "agn.h"
+
int iwlagn_hw_valid_rtc_data_addr(u32 addr)
{
return (addr >= IWLAGN_RTC_DATA_LOWER_BOUND) &&
/* half dBm need to multiply */
tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt);
- if (priv->tx_power_lmt_in_half_dbm &&
- priv->tx_power_lmt_in_half_dbm < tx_power_cmd.global_lmt) {
+ if (tx_power_cmd.global_lmt > priv->eeprom_data->max_tx_pwr_half_dbm) {
/*
* For the newer devices which using enhanced/extend tx power
* table in EEPROM, the format is in half dBm. driver need to
* "tx_power_user_lmt" is higher than EEPROM value (in
* half-dBm format), lower the tx power based on EEPROM
*/
- tx_power_cmd.global_lmt = priv->tx_power_lmt_in_half_dbm;
+ tx_power_cmd.global_lmt =
+ priv->eeprom_data->max_tx_pwr_half_dbm;
}
tx_power_cmd.flags = IWLAGN_TX_POWER_NO_CLOSED;
tx_power_cmd.srv_chan_lmt = IWLAGN_TX_POWER_AUTO;
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
int ave_rssi;
+ if (!ctx->vif || (ctx->vif->type != NL80211_IFTYPE_STATION)) {
+ IWL_DEBUG_INFO(priv, "BSS ctx not active or not in sta mode\n");
+ return false;
+ }
+
ave_rssi = ieee80211_ave_rssi(ctx->vif);
if (!ave_rssi) {
/* no rssi data, no changes to reduce tx power */
if (priv->chain_noise_data.active_chains)
active_chains = priv->chain_noise_data.active_chains;
else
- active_chains = priv->hw_params.valid_rx_ant;
+ active_chains = priv->eeprom_data->valid_rx_ant;
if (priv->cfg->bt_params &&
priv->cfg->bt_params->advanced_bt_coexist &&
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
+#include <net/ieee80211_radiotap.h>
#include <net/mac80211.h>
#include <asm/div64.h>
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
#include "iwl-io.h"
-#include "iwl-agn-calib.h"
-#include "iwl-agn.h"
#include "iwl-trans.h"
#include "iwl-op-mode.h"
#include "iwl-modparams.h"
+#include "dev.h"
+#include "calib.h"
+#include "agn.h"
+
/*****************************************************************************
*
* mac80211 entry point functions
IEEE80211_HW_SCAN_WHILE_IDLE;
hw->offchannel_tx_hw_queue = IWL_AUX_QUEUE;
+ hw->radiotap_mcs_details |= IEEE80211_RADIOTAP_MCS_HAVE_FMT;
/*
* Including the following line will crash some AP's. This
hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
- if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
+ if (priv->eeprom_data->bands[IEEE80211_BAND_2GHZ].n_channels)
priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
- &priv->bands[IEEE80211_BAND_2GHZ];
- if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
+ &priv->eeprom_data->bands[IEEE80211_BAND_2GHZ];
+ if (priv->eeprom_data->bands[IEEE80211_BAND_5GHZ].n_channels)
priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
- &priv->bands[IEEE80211_BAND_5GHZ];
+ &priv->eeprom_data->bands[IEEE80211_BAND_5GHZ];
hw->wiphy->hw_version = priv->trans->hw_id;
return 0;
}
-void iwlagn_mac_stop(struct ieee80211_hw *hw)
+static void iwlagn_mac_stop(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
-void iwlagn_mac_set_rekey_data(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct cfg80211_gtk_rekey_data *data)
+static void iwlagn_mac_set_rekey_data(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_gtk_rekey_data *data)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
#ifdef CONFIG_PM_SLEEP
-int iwlagn_mac_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
+static int iwlagn_mac_suspend(struct ieee80211_hw *hw,
+ struct cfg80211_wowlan *wowlan)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
}
#endif
-void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+static void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
dev_kfree_skb_any(skb);
}
-void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_key_conf *keyconf,
- struct ieee80211_sta *sta,
- u32 iv32, u16 *phase1key)
+static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_key_conf *keyconf,
+ struct ieee80211_sta *sta,
+ u32 iv32, u16 *phase1key)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
iwl_update_tkip_key(priv, vif, keyconf, sta, iv32, phase1key);
}
-int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta,
- struct ieee80211_key_conf *key)
+static int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
return ret;
}
-int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- enum ieee80211_ampdu_mlme_action action,
- struct ieee80211_sta *sta, u16 tid, u16 *ssn,
- u8 buf_size)
+static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ enum ieee80211_ampdu_mlme_action action,
+ struct ieee80211_sta *sta, u16 tid, u16 *ssn,
+ u8 buf_size)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
int ret = -EINVAL;
ret = iwl_sta_rx_agg_stop(priv, sta, tid);
break;
case IEEE80211_AMPDU_TX_START:
- if (!priv->trans->ops->tx_agg_setup)
+ if (!priv->trans->ops->txq_enable)
break;
if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG)
break;
return ret;
}
-int iwlagn_mac_sta_state(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta,
- enum ieee80211_sta_state old_state,
- enum ieee80211_sta_state new_state)
+static int iwlagn_mac_sta_state(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ enum ieee80211_sta_state old_state,
+ enum ieee80211_sta_state new_state)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
return ret;
}
-void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
- struct ieee80211_channel_switch *ch_switch)
+static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
+ struct ieee80211_channel_switch *ch_switch)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
- const struct iwl_channel_info *ch_info;
struct ieee80211_conf *conf = &hw->conf;
struct ieee80211_channel *channel = ch_switch->channel;
struct iwl_ht_config *ht_conf = &priv->current_ht_config;
if (le16_to_cpu(ctx->active.channel) == ch)
goto out;
- ch_info = iwl_get_channel_info(priv, channel->band, ch);
- if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_MAC80211(priv, "invalid channel\n");
- goto out;
- }
-
priv->current_ht_config.smps = conf->smps_mode;
/* Configure HT40 channels */
ieee80211_chswitch_done(ctx->vif, is_success);
}
-void iwlagn_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *total_flags,
- u64 multicast)
+static void iwlagn_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ u64 multicast)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
__le32 filter_or = 0, filter_nand = 0;
FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
}
-void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop)
+static void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
return err;
}
-int iwlagn_mac_cancel_remain_on_channel(struct ieee80211_hw *hw)
+static int iwlagn_mac_cancel_remain_on_channel(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
return 0;
}
-void iwlagn_mac_rssi_callback(struct ieee80211_hw *hw,
- enum ieee80211_rssi_event rssi_event)
+static void iwlagn_mac_rssi_callback(struct ieee80211_hw *hw,
+ enum ieee80211_rssi_event rssi_event)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
-int iwlagn_mac_set_tim(struct ieee80211_hw *hw,
- struct ieee80211_sta *sta, bool set)
+static int iwlagn_mac_set_tim(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta, bool set)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
return 0;
}
-int iwlagn_mac_conf_tx(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif, u16 queue,
- const struct ieee80211_tx_queue_params *params)
+static int iwlagn_mac_conf_tx(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif, u16 queue,
+ const struct ieee80211_tx_queue_params *params)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
return 0;
}
-int iwlagn_mac_tx_last_beacon(struct ieee80211_hw *hw)
+static int iwlagn_mac_tx_last_beacon(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
return iwlagn_commit_rxon(priv, ctx);
}
-int iwl_setup_interface(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
+static int iwl_setup_interface(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx)
{
struct ieee80211_vif *vif = ctx->vif;
int err, ac;
return err;
}
-void iwl_teardown_interface(struct iwl_priv *priv,
- struct ieee80211_vif *vif,
- bool mode_change)
+static void iwl_teardown_interface(struct iwl_priv *priv,
+ struct ieee80211_vif *vif,
+ bool mode_change)
{
struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
return err;
}
-int iwlagn_mac_hw_scan(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct cfg80211_scan_request *req)
+static int iwlagn_mac_hw_scan(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_scan_request *req)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
int ret;
iwl_send_add_sta(priv, &cmd, CMD_ASYNC);
}
-void iwlagn_mac_sta_notify(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- enum sta_notify_cmd cmd,
- struct ieee80211_sta *sta)
+static void iwlagn_mac_sta_notify(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ enum sta_notify_cmd cmd,
+ struct ieee80211_sta *sta)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
#include <asm/div64.h>
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
+#include "iwl-eeprom-read.h"
+#include "iwl-eeprom-parse.h"
#include "iwl-io.h"
-#include "iwl-agn-calib.h"
-#include "iwl-agn.h"
#include "iwl-trans.h"
#include "iwl-op-mode.h"
#include "iwl-drv.h"
#include "iwl-modparams.h"
+#include "dev.h"
+#include "calib.h"
+#include "agn.h"
+
/******************************************************************************
*
* module boiler plate
MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
MODULE_LICENSE("GPL");
+static const struct iwl_op_mode_ops iwl_dvm_ops;
+
void iwl_update_chain_flags(struct iwl_priv *priv)
{
struct iwl_rxon_context *ctx;
rate = info->control.rates[0].idx;
priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
- priv->hw_params.valid_tx_ant);
+ priv->eeprom_data->valid_tx_ant);
rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
/* In mac80211, rates for 5 GHz start at 0 */
7, 6, 5, 4,
};
-void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags)
+static void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags)
{
int i;
BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
}
-void iwl_rf_kill_ct_config(struct iwl_priv *priv)
+static void iwl_rf_kill_ct_config(struct iwl_priv *priv)
{
struct iwl_ct_kill_config cmd;
struct iwl_ct_kill_throttling_config adv_cmd;
}
}
-void iwl_send_bt_config(struct iwl_priv *priv)
+static void iwl_send_bt_config(struct iwl_priv *priv)
{
struct iwl_bt_cmd bt_cmd = {
.lead_time = BT_LEAD_TIME_DEF,
ieee80211_wake_queues(priv->hw);
/* Configure Tx antenna selection based on H/W config */
- iwlagn_send_tx_ant_config(priv, priv->hw_params.valid_tx_ant);
+ iwlagn_send_tx_ant_config(priv, priv->eeprom_data->valid_tx_ant);
if (iwl_is_associated_ctx(ctx) && !priv->wowlan) {
struct iwl_rxon_cmd *active_rxon =
priv->ucode_loaded = false;
iwl_trans_stop_device(priv->trans);
+ /* Set num_aux_in_flight must be done after the transport is stopped */
+ atomic_set(&priv->num_aux_in_flight, 0);
+
/* Clear out all status bits but a few that are stable across reset */
priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
- STATUS_GEO_CONFIGURED |
test_bit(STATUS_FW_ERROR, &priv->status) <<
STATUS_FW_ERROR |
test_bit(STATUS_EXIT_PENDING, &priv->status) <<
*
*****************************************************************************/
-void iwl_setup_deferred_work(struct iwl_priv *priv)
+static void iwl_setup_deferred_work(struct iwl_priv *priv)
{
priv->workqueue = create_singlethread_workqueue(DRV_NAME);
del_timer_sync(&priv->ucode_trace);
}
-static void iwl_init_hw_rates(struct ieee80211_rate *rates)
-{
- int i;
-
- for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
- rates[i].bitrate = iwl_rates[i].ieee * 5;
- rates[i].hw_value = i; /* Rate scaling will work on indexes */
- rates[i].hw_value_short = i;
- rates[i].flags = 0;
- if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
- /*
- * If CCK != 1M then set short preamble rate flag.
- */
- rates[i].flags |=
- (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
- 0 : IEEE80211_RATE_SHORT_PREAMBLE;
- }
- }
-}
-
-#define MAX_BIT_RATE_40_MHZ 150 /* Mbps */
-#define MAX_BIT_RATE_20_MHZ 72 /* Mbps */
-static void iwl_init_ht_hw_capab(const struct iwl_priv *priv,
- struct ieee80211_sta_ht_cap *ht_info,
- enum ieee80211_band band)
-{
- u16 max_bit_rate = 0;
- u8 rx_chains_num = priv->hw_params.rx_chains_num;
- u8 tx_chains_num = priv->hw_params.tx_chains_num;
-
- ht_info->cap = 0;
- memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
-
- ht_info->ht_supported = true;
-
- if (priv->cfg->ht_params &&
- priv->cfg->ht_params->ht_greenfield_support)
- ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
- ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
- max_bit_rate = MAX_BIT_RATE_20_MHZ;
- if (priv->hw_params.ht40_channel & BIT(band)) {
- ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
- ht_info->cap |= IEEE80211_HT_CAP_SGI_40;
- ht_info->mcs.rx_mask[4] = 0x01;
- max_bit_rate = MAX_BIT_RATE_40_MHZ;
- }
-
- if (iwlwifi_mod_params.amsdu_size_8K)
- ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
-
- ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
- ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
-
- ht_info->mcs.rx_mask[0] = 0xFF;
- if (rx_chains_num >= 2)
- ht_info->mcs.rx_mask[1] = 0xFF;
- if (rx_chains_num >= 3)
- ht_info->mcs.rx_mask[2] = 0xFF;
-
- /* Highest supported Rx data rate */
- max_bit_rate *= rx_chains_num;
- WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK);
- ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate);
-
- /* Tx MCS capabilities */
- ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
- if (tx_chains_num != rx_chains_num) {
- ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
- ht_info->mcs.tx_params |= ((tx_chains_num - 1) <<
- IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
- }
-}
-
-/**
- * iwl_init_geos - Initialize mac80211's geo/channel info based from eeprom
- */
-static int iwl_init_geos(struct iwl_priv *priv)
-{
- struct iwl_channel_info *ch;
- struct ieee80211_supported_band *sband;
- struct ieee80211_channel *channels;
- struct ieee80211_channel *geo_ch;
- struct ieee80211_rate *rates;
- int i = 0;
- s8 max_tx_power = IWLAGN_TX_POWER_TARGET_POWER_MIN;
-
- if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
- priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
- IWL_DEBUG_INFO(priv, "Geography modes already initialized.\n");
- set_bit(STATUS_GEO_CONFIGURED, &priv->status);
- return 0;
- }
-
- channels = kcalloc(priv->channel_count,
- sizeof(struct ieee80211_channel), GFP_KERNEL);
- if (!channels)
- return -ENOMEM;
-
- rates = kcalloc(IWL_RATE_COUNT_LEGACY, sizeof(struct ieee80211_rate),
- GFP_KERNEL);
- if (!rates) {
- kfree(channels);
- return -ENOMEM;
- }
-
- /* 5.2GHz channels start after the 2.4GHz channels */
- sband = &priv->bands[IEEE80211_BAND_5GHZ];
- sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)];
- /* just OFDM */
- sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
- sband->n_bitrates = IWL_RATE_COUNT_LEGACY - IWL_FIRST_OFDM_RATE;
-
- if (priv->hw_params.sku & EEPROM_SKU_CAP_11N_ENABLE)
- iwl_init_ht_hw_capab(priv, &sband->ht_cap,
- IEEE80211_BAND_5GHZ);
-
- sband = &priv->bands[IEEE80211_BAND_2GHZ];
- sband->channels = channels;
- /* OFDM & CCK */
- sband->bitrates = rates;
- sband->n_bitrates = IWL_RATE_COUNT_LEGACY;
-
- if (priv->hw_params.sku & EEPROM_SKU_CAP_11N_ENABLE)
- iwl_init_ht_hw_capab(priv, &sband->ht_cap,
- IEEE80211_BAND_2GHZ);
-
- priv->ieee_channels = channels;
- priv->ieee_rates = rates;
-
- for (i = 0; i < priv->channel_count; i++) {
- ch = &priv->channel_info[i];
-
- /* FIXME: might be removed if scan is OK */
- if (!is_channel_valid(ch))
- continue;
-
- sband = &priv->bands[ch->band];
-
- geo_ch = &sband->channels[sband->n_channels++];
-
- geo_ch->center_freq =
- ieee80211_channel_to_frequency(ch->channel, ch->band);
- geo_ch->max_power = ch->max_power_avg;
- geo_ch->max_antenna_gain = 0xff;
- geo_ch->hw_value = ch->channel;
-
- if (is_channel_valid(ch)) {
- if (!(ch->flags & EEPROM_CHANNEL_IBSS))
- geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
-
- if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
- geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
-
- if (ch->flags & EEPROM_CHANNEL_RADAR)
- geo_ch->flags |= IEEE80211_CHAN_RADAR;
-
- geo_ch->flags |= ch->ht40_extension_channel;
-
- if (ch->max_power_avg > max_tx_power)
- max_tx_power = ch->max_power_avg;
- } else {
- geo_ch->flags |= IEEE80211_CHAN_DISABLED;
- }
-
- IWL_DEBUG_INFO(priv, "Channel %d Freq=%d[%sGHz] %s flag=0x%X\n",
- ch->channel, geo_ch->center_freq,
- is_channel_a_band(ch) ? "5.2" : "2.4",
- geo_ch->flags & IEEE80211_CHAN_DISABLED ?
- "restricted" : "valid",
- geo_ch->flags);
- }
-
- priv->tx_power_device_lmt = max_tx_power;
- priv->tx_power_user_lmt = max_tx_power;
- priv->tx_power_next = max_tx_power;
-
- if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
- priv->hw_params.sku & EEPROM_SKU_CAP_BAND_52GHZ) {
- IWL_INFO(priv, "Incorrectly detected BG card as ABG. "
- "Please send your %s to maintainer.\n",
- priv->trans->hw_id_str);
- priv->hw_params.sku &= ~EEPROM_SKU_CAP_BAND_52GHZ;
- }
-
- if (iwlwifi_mod_params.disable_5ghz)
- priv->bands[IEEE80211_BAND_5GHZ].n_channels = 0;
-
- IWL_INFO(priv, "Tunable channels: %d 802.11bg, %d 802.11a channels\n",
- priv->bands[IEEE80211_BAND_2GHZ].n_channels,
- priv->bands[IEEE80211_BAND_5GHZ].n_channels);
-
- set_bit(STATUS_GEO_CONFIGURED, &priv->status);
-
- return 0;
-}
-
-/*
- * iwl_free_geos - undo allocations in iwl_init_geos
- */
-static void iwl_free_geos(struct iwl_priv *priv)
+static int iwl_init_drv(struct iwl_priv *priv)
{
- kfree(priv->ieee_channels);
- kfree(priv->ieee_rates);
- clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
-}
-
-int iwl_init_drv(struct iwl_priv *priv)
-{
- int ret;
-
spin_lock_init(&priv->sta_lock);
mutex_init(&priv->mutex);
INIT_LIST_HEAD(&priv->calib_results);
- priv->ieee_channels = NULL;
- priv->ieee_rates = NULL;
priv->band = IEEE80211_BAND_2GHZ;
priv->plcp_delta_threshold =
priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF;
}
- ret = iwl_init_channel_map(priv);
- if (ret) {
- IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
- goto err;
- }
-
- ret = iwl_init_geos(priv);
- if (ret) {
- IWL_ERR(priv, "initializing geos failed: %d\n", ret);
- goto err_free_channel_map;
- }
- iwl_init_hw_rates(priv->ieee_rates);
-
return 0;
-
-err_free_channel_map:
- iwl_free_channel_map(priv);
-err:
- return ret;
}
-void iwl_uninit_drv(struct iwl_priv *priv)
+static void iwl_uninit_drv(struct iwl_priv *priv)
{
- iwl_free_geos(priv);
- iwl_free_channel_map(priv);
kfree(priv->scan_cmd);
kfree(priv->beacon_cmd);
kfree(rcu_dereference_raw(priv->noa_data));
#endif
}
-void iwl_set_hw_params(struct iwl_priv *priv)
+static void iwl_set_hw_params(struct iwl_priv *priv)
{
if (priv->cfg->ht_params)
priv->hw_params.use_rts_for_aggregation =
/* show what optional capabilities we have */
-void iwl_option_config(struct iwl_priv *priv)
+static void iwl_option_config(struct iwl_priv *priv)
{
#ifdef CONFIG_IWLWIFI_DEBUG
IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUG enabled\n");
#endif
}
+static int iwl_eeprom_init_hw_params(struct iwl_priv *priv)
+{
+ u16 radio_cfg;
+
+ priv->hw_params.sku = priv->eeprom_data->sku;
+
+ if (priv->hw_params.sku & EEPROM_SKU_CAP_11N_ENABLE &&
+ !priv->cfg->ht_params) {
+ IWL_ERR(priv, "Invalid 11n configuration\n");
+ return -EINVAL;
+ }
+
+ if (!priv->hw_params.sku) {
+ IWL_ERR(priv, "Invalid device sku\n");
+ return -EINVAL;
+ }
+
+ IWL_INFO(priv, "Device SKU: 0x%X\n", priv->hw_params.sku);
+
+ radio_cfg = priv->eeprom_data->radio_cfg;
+
+ priv->hw_params.tx_chains_num =
+ num_of_ant(priv->eeprom_data->valid_tx_ant);
+ if (priv->cfg->rx_with_siso_diversity)
+ priv->hw_params.rx_chains_num = 1;
+ else
+ priv->hw_params.rx_chains_num =
+ num_of_ant(priv->eeprom_data->valid_rx_ant);
+
+ IWL_INFO(priv, "Valid Tx ant: 0x%X, Valid Rx ant: 0x%X\n",
+ priv->eeprom_data->valid_tx_ant,
+ priv->eeprom_data->valid_rx_ant);
+
+ return 0;
+}
+
static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
const struct iwl_cfg *cfg,
const struct iwl_fw *fw)
trans_cfg.queue_watchdog_timeout =
priv->cfg->base_params->wd_timeout;
else
- trans_cfg.queue_watchdog_timeout = IWL_WATCHHDOG_DISABLED;
+ trans_cfg.queue_watchdog_timeout = IWL_WATCHDOG_DISABLED;
trans_cfg.command_names = iwl_dvm_cmd_strings;
ucode_flags = fw->ucode_capa.flags;
goto out_free_hw;
/* Read the EEPROM */
- if (iwl_eeprom_init(priv, priv->trans->hw_rev)) {
+ if (iwl_read_eeprom(priv->trans, &priv->eeprom_blob,
+ &priv->eeprom_blob_size)) {
IWL_ERR(priv, "Unable to init EEPROM\n");
goto out_free_hw;
}
+
/* Reset chip to save power until we load uCode during "up". */
iwl_trans_stop_hw(priv->trans, false);
- if (iwl_eeprom_check_version(priv))
+ priv->eeprom_data = iwl_parse_eeprom_data(priv->trans->dev, priv->cfg,
+ priv->eeprom_blob,
+ priv->eeprom_blob_size);
+ if (!priv->eeprom_data)
+ goto out_free_eeprom_blob;
+
+ if (iwl_eeprom_check_version(priv->eeprom_data, priv->trans))
goto out_free_eeprom;
if (iwl_eeprom_init_hw_params(priv))
goto out_free_eeprom;
/* extract MAC Address */
- iwl_eeprom_get_mac(priv, priv->addresses[0].addr);
+ memcpy(priv->addresses[0].addr, priv->eeprom_data->hw_addr, ETH_ALEN);
IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr);
priv->hw->wiphy->addresses = priv->addresses;
priv->hw->wiphy->n_addresses = 1;
- num_mac = iwl_eeprom_query16(priv, EEPROM_NUM_MAC_ADDRESS);
+ num_mac = priv->eeprom_data->n_hw_addrs;
if (num_mac > 1) {
memcpy(priv->addresses[1].addr, priv->addresses[0].addr,
ETH_ALEN);
destroy_workqueue(priv->workqueue);
priv->workqueue = NULL;
iwl_uninit_drv(priv);
+out_free_eeprom_blob:
+ kfree(priv->eeprom_blob);
out_free_eeprom:
- iwl_eeprom_free(priv);
+ iwl_free_eeprom_data(priv->eeprom_data);
out_free_hw:
ieee80211_free_hw(priv->hw);
out:
return op_mode;
}
-void iwl_op_mode_dvm_stop(struct iwl_op_mode *op_mode)
+static void iwl_op_mode_dvm_stop(struct iwl_op_mode *op_mode)
{
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
priv->ucode_loaded = false;
iwl_trans_stop_device(priv->trans);
- iwl_eeprom_free(priv);
+ kfree(priv->eeprom_blob);
+ iwl_free_eeprom_data(priv->eeprom_data);
/*netif_stop_queue(dev); */
flush_workqueue(priv->workqueue);
}
}
-void iwl_nic_error(struct iwl_op_mode *op_mode)
+static void iwl_nic_error(struct iwl_op_mode *op_mode)
{
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
iwlagn_fw_error(priv, false);
}
-void iwl_cmd_queue_full(struct iwl_op_mode *op_mode)
+static void iwl_cmd_queue_full(struct iwl_op_mode *op_mode)
{
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
}
}
-void iwl_nic_config(struct iwl_op_mode *op_mode)
+#define EEPROM_RF_CONFIG_TYPE_MAX 0x3
+
+static void iwl_nic_config(struct iwl_op_mode *op_mode)
{
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+ u16 radio_cfg = priv->eeprom_data->radio_cfg;
+
+ /* SKU Control */
+ iwl_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH |
+ CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP,
+ (CSR_HW_REV_STEP(priv->trans->hw_rev) <<
+ CSR_HW_IF_CONFIG_REG_POS_MAC_STEP) |
+ (CSR_HW_REV_DASH(priv->trans->hw_rev) <<
+ CSR_HW_IF_CONFIG_REG_POS_MAC_DASH));
+
+ /* write radio config values to register */
+ if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX) {
+ u32 reg_val =
+ EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <<
+ CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE |
+ EEPROM_RF_CFG_STEP_MSK(radio_cfg) <<
+ CSR_HW_IF_CONFIG_REG_POS_PHY_STEP |
+ EEPROM_RF_CFG_DASH_MSK(radio_cfg) <<
+ CSR_HW_IF_CONFIG_REG_POS_PHY_DASH;
+
+ iwl_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE |
+ CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP |
+ CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH, reg_val);
+
+ IWL_INFO(priv, "Radio type=0x%x-0x%x-0x%x\n",
+ EEPROM_RF_CFG_TYPE_MSK(radio_cfg),
+ EEPROM_RF_CFG_STEP_MSK(radio_cfg),
+ EEPROM_RF_CFG_DASH_MSK(radio_cfg));
+ } else {
+ WARN_ON(1);
+ }
+
+ /* set CSR_HW_CONFIG_REG for uCode use */
+ iwl_set_bit(priv->trans, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
+ CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
priv->lib->nic_config(priv);
}
IWL_ERR(priv, "RF is used by WiMAX\n");
}
-void iwl_stop_sw_queue(struct iwl_op_mode *op_mode, int queue)
+static void iwl_stop_sw_queue(struct iwl_op_mode *op_mode, int queue)
{
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
int mq = priv->queue_to_mac80211[queue];
ieee80211_stop_queue(priv->hw, mq);
}
-void iwl_wake_sw_queue(struct iwl_op_mode *op_mode, int queue)
+static void iwl_wake_sw_queue(struct iwl_op_mode *op_mode, int queue)
{
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
int mq = priv->queue_to_mac80211[queue];
priv->passive_no_rx = false;
}
-void iwl_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb)
+static void iwl_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb)
{
+ struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
struct ieee80211_tx_info *info;
info = IEEE80211_SKB_CB(skb);
- kmem_cache_free(iwl_tx_cmd_pool, (info->driver_data[1]));
+ iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]);
dev_kfree_skb_any(skb);
}
-void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
+static void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
{
struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
wiphy_rfkill_set_hw_state(priv->hw->wiphy, state);
}
-const struct iwl_op_mode_ops iwl_dvm_ops = {
+static const struct iwl_op_mode_ops iwl_dvm_ops = {
.start = iwl_op_mode_dvm_start,
.stop = iwl_op_mode_dvm_stop,
.rx = iwl_rx_dispatch,
* driver and module entry point
*
*****************************************************************************/
-
-struct kmem_cache *iwl_tx_cmd_pool;
-
static int __init iwl_init(void)
{
pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
pr_info(DRV_COPYRIGHT "\n");
- iwl_tx_cmd_pool = kmem_cache_create("iwl_dev_cmd",
- sizeof(struct iwl_device_cmd),
- sizeof(void *), 0, NULL);
- if (!iwl_tx_cmd_pool)
- return -ENOMEM;
-
ret = iwlagn_rate_control_register();
if (ret) {
pr_err("Unable to register rate control algorithm: %d\n", ret);
- goto error_rc_register;
+ return ret;
}
ret = iwl_opmode_register("iwldvm", &iwl_dvm_ops);
if (ret) {
pr_err("Unable to register op_mode: %d\n", ret);
- goto error_opmode_register;
+ iwlagn_rate_control_unregister();
}
- return ret;
-error_opmode_register:
- iwlagn_rate_control_unregister();
-error_rc_register:
- kmem_cache_destroy(iwl_tx_cmd_pool);
return ret;
}
module_init(iwl_init);
{
iwl_opmode_deregister("iwldvm");
iwlagn_rate_control_unregister();
- kmem_cache_destroy(iwl_tx_cmd_pool);
}
module_exit(iwl_exit);
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
-
#include <net/mac80211.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-agn.h"
#include "iwl-io.h"
-#include "iwl-commands.h"
#include "iwl-debug.h"
-#include "iwl-power.h"
#include "iwl-trans.h"
#include "iwl-modparams.h"
+#include "dev.h"
+#include "agn.h"
+#include "commands.h"
+#include "power.h"
/*
* Setting power level allows the card to go to sleep when not busy.
#ifndef __iwl_power_setting_h__
#define __iwl_power_setting_h__
-#include "iwl-commands.h"
+#include "commands.h"
struct iwl_power_mgr {
struct iwl_powertable_cmd sleep_cmd;
#include <linux/workqueue.h>
-#include "iwl-dev.h"
-#include "iwl-agn.h"
-#include "iwl-op-mode.h"
-#include "iwl-modparams.h"
+#include "dev.h"
+#include "agn.h"
#define RS_NAME "iwl-agn-rs"
if (num_of_ant(tbl->ant_type) > 1)
tbl->ant_type =
- first_antenna(priv->hw_params.valid_tx_ant);
+ first_antenna(priv->eeprom_data->valid_tx_ant);
tbl->is_ht40 = 0;
tbl->is_SGI = 0;
u32 sz = (sizeof(struct iwl_scale_tbl_info) -
(sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
u8 start_action;
- u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
+ u8 valid_tx_ant = priv->eeprom_data->valid_tx_ant;
u8 tx_chains_num = priv->hw_params.tx_chains_num;
int ret = 0;
u8 update_search_tbl_counter = 0;
case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
/* avoid antenna B and MIMO */
valid_tx_ant =
- first_antenna(priv->hw_params.valid_tx_ant);
+ first_antenna(priv->eeprom_data->valid_tx_ant);
if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2 &&
tbl->action != IWL_LEGACY_SWITCH_SISO)
tbl->action = IWL_LEGACY_SWITCH_SISO;
else if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2)
tbl->action = IWL_LEGACY_SWITCH_SISO;
valid_tx_ant =
- first_antenna(priv->hw_params.valid_tx_ant);
+ first_antenna(priv->eeprom_data->valid_tx_ant);
}
start_action = tbl->action;
u32 sz = (sizeof(struct iwl_scale_tbl_info) -
(sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
u8 start_action;
- u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
+ u8 valid_tx_ant = priv->eeprom_data->valid_tx_ant;
u8 tx_chains_num = priv->hw_params.tx_chains_num;
u8 update_search_tbl_counter = 0;
int ret;
case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
/* avoid antenna B and MIMO */
valid_tx_ant =
- first_antenna(priv->hw_params.valid_tx_ant);
+ first_antenna(priv->eeprom_data->valid_tx_ant);
if (tbl->action != IWL_SISO_SWITCH_ANTENNA1)
tbl->action = IWL_SISO_SWITCH_ANTENNA1;
break;
/* configure as 1x1 if bt full concurrency */
if (priv->bt_full_concurrent) {
valid_tx_ant =
- first_antenna(priv->hw_params.valid_tx_ant);
+ first_antenna(priv->eeprom_data->valid_tx_ant);
if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2)
tbl->action = IWL_SISO_SWITCH_ANTENNA1;
}
u32 sz = (sizeof(struct iwl_scale_tbl_info) -
(sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
u8 start_action;
- u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
+ u8 valid_tx_ant = priv->eeprom_data->valid_tx_ant;
u8 tx_chains_num = priv->hw_params.tx_chains_num;
u8 update_search_tbl_counter = 0;
int ret;
u32 sz = (sizeof(struct iwl_scale_tbl_info) -
(sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
u8 start_action;
- u8 valid_tx_ant = priv->hw_params.valid_tx_ant;
+ u8 valid_tx_ant = priv->eeprom_data->valid_tx_ant;
u8 tx_chains_num = priv->hw_params.tx_chains_num;
int ret;
u8 update_search_tbl_counter = 0;
i = lq_sta->last_txrate_idx;
- valid_tx_ant = priv->hw_params.valid_tx_ant;
+ valid_tx_ant = priv->eeprom_data->valid_tx_ant;
if (!lq_sta->search_better_tbl)
active_tbl = lq_sta->active_tbl;
/* These values will be overridden later */
lq_sta->lq.general_params.single_stream_ant_msk =
- first_antenna(priv->hw_params.valid_tx_ant);
+ first_antenna(priv->eeprom_data->valid_tx_ant);
lq_sta->lq.general_params.dual_stream_ant_msk =
- priv->hw_params.valid_tx_ant &
- ~first_antenna(priv->hw_params.valid_tx_ant);
+ priv->eeprom_data->valid_tx_ant &
+ ~first_antenna(priv->eeprom_data->valid_tx_ant);
if (!lq_sta->lq.general_params.dual_stream_ant_msk) {
lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB;
- } else if (num_of_ant(priv->hw_params.valid_tx_ant) == 2) {
+ } else if (num_of_ant(priv->eeprom_data->valid_tx_ant) == 2) {
lq_sta->lq.general_params.dual_stream_ant_msk =
- priv->hw_params.valid_tx_ant;
+ priv->eeprom_data->valid_tx_ant;
}
/* as default allow aggregation for all tids */
if (priv && priv->bt_full_concurrent) {
/* 1x1 only */
tbl_type.ant_type =
- first_antenna(priv->hw_params.valid_tx_ant);
+ first_antenna(priv->eeprom_data->valid_tx_ant);
}
/* How many times should we repeat the initial rate? */
if (priv->bt_full_concurrent)
valid_tx_ant = ANT_A;
else
- valid_tx_ant = priv->hw_params.valid_tx_ant;
+ valid_tx_ant = priv->eeprom_data->valid_tx_ant;
}
/* Fill rest of rate table */
if (priv && priv->bt_full_concurrent) {
/* 1x1 only */
tbl_type.ant_type =
- first_antenna(priv->hw_params.valid_tx_ant);
+ first_antenna(priv->eeprom_data->valid_tx_ant);
}
/* Indicate to uCode which entries might be MIMO.
u8 ant_sel_tx;
priv = lq_sta->drv;
- valid_tx_ant = priv->hw_params.valid_tx_ant;
+ valid_tx_ant = priv->eeprom_data->valid_tx_ant;
if (lq_sta->dbg_fixed_rate) {
ant_sel_tx =
((lq_sta->dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK)
desc += sprintf(buff+desc, "fixed rate 0x%X\n",
lq_sta->dbg_fixed_rate);
desc += sprintf(buff+desc, "valid_tx_ant %s%s%s\n",
- (priv->hw_params.valid_tx_ant & ANT_A) ? "ANT_A," : "",
- (priv->hw_params.valid_tx_ant & ANT_B) ? "ANT_B," : "",
- (priv->hw_params.valid_tx_ant & ANT_C) ? "ANT_C" : "");
+ (priv->eeprom_data->valid_tx_ant & ANT_A) ? "ANT_A," : "",
+ (priv->eeprom_data->valid_tx_ant & ANT_B) ? "ANT_B," : "",
+ (priv->eeprom_data->valid_tx_ant & ANT_C) ? "ANT_C" : "");
desc += sprintf(buff+desc, "lq type %s\n",
(is_legacy(tbl->lq_type)) ? "legacy" : "HT");
if (is_Ht(tbl->lq_type)) {
#include <net/mac80211.h>
-#include "iwl-commands.h"
#include "iwl-config.h"
+#include "commands.h"
+
struct iwl_rate_info {
u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */
u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */
#include <linux/sched.h>
#include <net/mac80211.h>
#include <asm/unaligned.h>
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
#include "iwl-io.h"
-#include "iwl-agn-calib.h"
-#include "iwl-agn.h"
-#include "iwl-modparams.h"
+#include "dev.h"
+#include "calib.h"
+#include "agn.h"
#define IWL_CMD_ENTRY(x) [x] = #x
rx_status.flag |= RX_FLAG_40MHZ;
if (rate_n_flags & RATE_MCS_SGI_MSK)
rx_status.flag |= RX_FLAG_SHORT_GI;
+ if (rate_n_flags & RATE_MCS_GF_MSK)
+ rx_status.flag |= RX_FLAG_HT_GF;
iwlagn_pass_packet_to_mac80211(priv, header, len, ampdu_status,
rxb, &rx_status);
*****************************************************************************/
#include <linux/etherdevice.h>
-#include "iwl-dev.h"
-#include "iwl-agn.h"
-#include "iwl-agn-calib.h"
#include "iwl-trans.h"
#include "iwl-modparams.h"
+#include "dev.h"
+#include "agn.h"
+#include "calib.h"
/*
* initialize rxon structure with default values from eeprom
void iwl_connection_init_rx_config(struct iwl_priv *priv,
struct iwl_rxon_context *ctx)
{
- const struct iwl_channel_info *ch_info;
-
memset(&ctx->staging, 0, sizeof(ctx->staging));
if (!ctx->vif) {
ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
#endif
- ch_info = iwl_get_channel_info(priv, priv->band,
- le16_to_cpu(ctx->active.channel));
-
- if (!ch_info)
- ch_info = &priv->channel_info[0];
-
- ctx->staging.channel = cpu_to_le16(ch_info->channel);
- priv->band = ch_info->band;
+ ctx->staging.channel = cpu_to_le16(priv->hw->conf.channel->hw_value);
+ priv->band = priv->hw->conf.channel->band;
iwl_set_flags_for_band(priv, ctx, priv->band, ctx->vif);
return ret;
}
-void iwlagn_update_qos(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
+static void iwlagn_update_qos(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx)
{
int ret;
IWL_DEBUG_QUIET_RFKILL(priv, "Failed to update QoS\n");
}
-int iwlagn_update_beacon(struct iwl_priv *priv,
- struct ieee80211_vif *vif)
+static int iwlagn_update_beacon(struct iwl_priv *priv,
+ struct ieee80211_vif *vif)
{
lockdep_assert_held(&priv->mutex);
}
static int iwlagn_send_rxon_assoc(struct iwl_priv *priv,
- struct iwl_rxon_context *ctx)
+ struct iwl_rxon_context *ctx)
{
int ret = 0;
struct iwl_rxon_assoc_cmd rxon_assoc;
return -EINVAL;
}
- if (tx_power > priv->tx_power_device_lmt) {
+ if (tx_power > DIV_ROUND_UP(priv->eeprom_data->max_tx_pwr_half_dbm, 2)) {
IWL_WARN(priv,
"Requested user TXPOWER %d above upper limit %d.\n",
- tx_power, priv->tx_power_device_lmt);
+ tx_power, priv->eeprom_data->max_tx_pwr_half_dbm);
return -EINVAL;
}
* or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
* a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
*/
-int iwl_full_rxon_required(struct iwl_priv *priv,
- struct iwl_rxon_context *ctx)
+static int iwl_full_rxon_required(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx)
{
const struct iwl_rxon_cmd *staging = &ctx->staging;
const struct iwl_rxon_cmd *active = &ctx->active;
struct iwl_rxon_context *ctx;
struct ieee80211_conf *conf = &hw->conf;
struct ieee80211_channel *channel = conf->channel;
- const struct iwl_channel_info *ch_info;
int ret = 0;
IWL_DEBUG_MAC80211(priv, "enter: changed %#x\n", changed);
}
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
- ch_info = iwl_get_channel_info(priv, channel->band,
- channel->hw_value);
- if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
- ret = -EINVAL;
- goto out;
- }
-
for_each_context(priv, ctx) {
/* Configure HT40 channels */
if (ctx->ht.enabled != conf_is_ht(conf))
return ret;
}
-void iwlagn_check_needed_chains(struct iwl_priv *priv,
- struct iwl_rxon_context *ctx,
- struct ieee80211_bss_conf *bss_conf)
+static void iwlagn_check_needed_chains(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx,
+ struct ieee80211_bss_conf *bss_conf)
{
struct ieee80211_vif *vif = ctx->vif;
struct iwl_rxon_context *tmp;
ht_conf->single_chain_sufficient = !need_multiple;
}
-void iwlagn_chain_noise_reset(struct iwl_priv *priv)
+static void iwlagn_chain_noise_reset(struct iwl_priv *priv)
{
struct iwl_chain_noise_data *data = &priv->chain_noise_data;
int ret;
#include <linux/etherdevice.h>
#include <net/mac80211.h>
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-io.h"
-#include "iwl-agn.h"
-#include "iwl-trans.h"
+#include "dev.h"
+#include "agn.h"
/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
* sending probe req. This should be set long enough to hear probe responses
* to receive scan abort command or it does not perform
* hardware scan currently */
if (!test_bit(STATUS_READY, &priv->status) ||
- !test_bit(STATUS_GEO_CONFIGURED, &priv->status) ||
!test_bit(STATUS_SCAN_HW, &priv->status) ||
test_bit(STATUS_FW_ERROR, &priv->status))
return -EIO;
ieee80211_scan_completed(priv->hw, aborted);
}
- if (priv->scan_type == IWL_SCAN_ROC) {
- ieee80211_remain_on_channel_expired(priv->hw);
- priv->hw_roc_channel = NULL;
- schedule_delayed_work(&priv->hw_roc_disable_work, 10 * HZ);
- }
+ if (priv->scan_type == IWL_SCAN_ROC)
+ iwl_scan_roc_expired(priv);
priv->scan_type = IWL_SCAN_NORMAL;
priv->scan_vif = NULL;
goto out_settings;
}
- if (priv->scan_type == IWL_SCAN_ROC) {
- ieee80211_remain_on_channel_expired(priv->hw);
- priv->hw_roc_channel = NULL;
- schedule_delayed_work(&priv->hw_roc_disable_work, 10 * HZ);
- }
+ if (priv->scan_type == IWL_SCAN_ROC)
+ iwl_scan_roc_expired(priv);
if (priv->scan_type != IWL_SCAN_NORMAL && !aborted) {
int err;
/* Return valid, unused, channel for a passive scan to reset the RF */
static u8 iwl_get_single_channel_number(struct iwl_priv *priv,
- enum ieee80211_band band)
+ enum ieee80211_band band)
{
- const struct iwl_channel_info *ch_info;
- int i;
- u8 channel = 0;
- u8 min, max;
+ struct ieee80211_supported_band *sband = priv->hw->wiphy->bands[band];
struct iwl_rxon_context *ctx;
+ int i;
- if (band == IEEE80211_BAND_5GHZ) {
- min = 14;
- max = priv->channel_count;
- } else {
- min = 0;
- max = 14;
- }
-
- for (i = min; i < max; i++) {
+ for (i = 0; i < sband->n_channels; i++) {
bool busy = false;
for_each_context(priv, ctx) {
- busy = priv->channel_info[i].channel ==
+ busy = sband->channels[i].hw_value ==
le16_to_cpu(ctx->staging.channel);
if (busy)
break;
if (busy)
continue;
- channel = priv->channel_info[i].channel;
- ch_info = iwl_get_channel_info(priv, band, channel);
- if (is_channel_valid(ch_info))
- break;
+ if (!(sband->channels[i].flags & IEEE80211_CHAN_DISABLED))
+ return sband->channels[i].hw_value;
}
- return channel;
+ return 0;
}
static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
{
struct ieee80211_channel *chan;
const struct ieee80211_supported_band *sband;
- const struct iwl_channel_info *ch_info;
u16 passive_dwell = 0;
u16 active_dwell = 0;
int added, i;
channel = chan->hw_value;
scan_ch->channel = cpu_to_le16(channel);
- ch_info = iwl_get_channel_info(priv, band, channel);
- if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_SCAN(priv,
- "Channel %d is INVALID for this band.\n",
- channel);
- continue;
- }
-
- if (!is_active || is_channel_passive(ch_info) ||
- (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
+ if (!is_active || (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
else
scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
u16 rx_chain = 0;
enum ieee80211_band band;
u8 n_probes = 0;
- u8 rx_ant = priv->hw_params.valid_rx_ant;
+ u8 rx_ant = priv->eeprom_data->valid_rx_ant;
u8 rate;
bool is_active = false;
int chan_mod;
u8 active_chains;
- u8 scan_tx_antennas = priv->hw_params.valid_tx_ant;
+ u8 scan_tx_antennas = priv->eeprom_data->valid_tx_ant;
int ret;
int scan_cmd_size = sizeof(struct iwl_scan_cmd) +
MAX_SCAN_CHANNEL * sizeof(struct iwl_scan_channel) +
/* MIMO is not used here, but value is required */
rx_chain |=
- priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
+ priv->eeprom_data->valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
set_bit(STATUS_SCAN_HW, &priv->status);
ret = iwlagn_set_pan_params(priv);
- if (ret)
+ if (ret) {
+ clear_bit(STATUS_SCAN_HW, &priv->status);
return ret;
+ }
ret = iwl_dvm_send_cmd(priv, &cmd);
if (ret) {
void iwl_init_scan_params(struct iwl_priv *priv)
{
- u8 ant_idx = fls(priv->hw_params.valid_tx_ant) - 1;
+ u8 ant_idx = fls(priv->eeprom_data->valid_tx_ant) - 1;
if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ])
priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = ant_idx;
if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ])
mutex_unlock(&priv->mutex);
}
}
+
+void iwl_scan_roc_expired(struct iwl_priv *priv)
+{
+ /*
+ * The status bit should be set here, to prevent a race
+ * where the atomic_read returns 1, but before the execution continues
+ * iwl_scan_offchannel_skb_status() checks if the status bit is set
+ */
+ set_bit(STATUS_SCAN_ROC_EXPIRED, &priv->status);
+
+ if (atomic_read(&priv->num_aux_in_flight) == 0) {
+ ieee80211_remain_on_channel_expired(priv->hw);
+ priv->hw_roc_channel = NULL;
+ schedule_delayed_work(&priv->hw_roc_disable_work,
+ 10 * HZ);
+
+ clear_bit(STATUS_SCAN_ROC_EXPIRED, &priv->status);
+ } else {
+ IWL_DEBUG_SCAN(priv, "ROC done with %d frames in aux\n",
+ atomic_read(&priv->num_aux_in_flight));
+ }
+}
+
+void iwl_scan_offchannel_skb(struct iwl_priv *priv)
+{
+ WARN_ON(!priv->hw_roc_start_notified);
+ atomic_inc(&priv->num_aux_in_flight);
+}
+
+void iwl_scan_offchannel_skb_status(struct iwl_priv *priv)
+{
+ if (atomic_dec_return(&priv->num_aux_in_flight) == 0 &&
+ test_bit(STATUS_SCAN_ROC_EXPIRED, &priv->status)) {
+ IWL_DEBUG_SCAN(priv, "0 aux frames. Calling ROC expired\n");
+ iwl_scan_roc_expired(priv);
+ }
+}
*****************************************************************************/
#include <linux/etherdevice.h>
#include <net/mac80211.h>
-
-#include "iwl-dev.h"
-#include "iwl-agn.h"
#include "iwl-trans.h"
+#include "dev.h"
+#include "agn.h"
const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
return cmd.handler_status;
}
-static bool iwl_is_channel_extension(struct iwl_priv *priv,
- enum ieee80211_band band,
- u16 channel, u8 extension_chan_offset)
-{
- const struct iwl_channel_info *ch_info;
-
- ch_info = iwl_get_channel_info(priv, band, channel);
- if (!is_channel_valid(ch_info))
- return false;
-
- if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
- return !(ch_info->ht40_extension_channel &
- IEEE80211_CHAN_NO_HT40PLUS);
- else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)
- return !(ch_info->ht40_extension_channel &
- IEEE80211_CHAN_NO_HT40MINUS);
-
- return false;
-}
-
bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
struct iwl_rxon_context *ctx,
struct ieee80211_sta_ht_cap *ht_cap)
if (!ctx->ht.enabled || !ctx->ht.is_40mhz)
return false;
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+ if (priv->disable_ht40)
+ return false;
+#endif
+
/*
- * We do not check for IEEE80211_HT_CAP_SUP_WIDTH_20_40
- * the bit will not set if it is pure 40MHz case
+ * Remainder of this function checks ht_cap, but if it's
+ * NULL then we can do HT40 (special case for RXON)
*/
- if (ht_cap && !ht_cap->ht_supported)
+ if (!ht_cap)
+ return true;
+
+ if (!ht_cap->ht_supported)
return false;
-#ifdef CONFIG_IWLWIFI_DEBUGFS
- if (priv->disable_ht40)
+ if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
return false;
-#endif
- return iwl_is_channel_extension(priv, priv->band,
- le16_to_cpu(ctx->staging.channel),
- ctx->ht.extension_chan_offset);
+ return true;
}
static void iwl_sta_calc_ht_flags(struct iwl_priv *priv,
if (r >= IWL_FIRST_CCK_RATE && r <= IWL_LAST_CCK_RATE)
rate_flags |= RATE_MCS_CCK_MSK;
- rate_flags |= first_antenna(priv->hw_params.valid_tx_ant) <<
+ rate_flags |= first_antenna(priv->eeprom_data->valid_tx_ant) <<
RATE_MCS_ANT_POS;
rate_n_flags = iwl_hw_set_rate_n_flags(iwl_rates[r].plcp, rate_flags);
for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
link_cmd->rs_table[i].rate_n_flags = rate_n_flags;
link_cmd->general_params.single_stream_ant_msk =
- first_antenna(priv->hw_params.valid_tx_ant);
+ first_antenna(priv->eeprom_data->valid_tx_ant);
link_cmd->general_params.dual_stream_ant_msk =
- priv->hw_params.valid_tx_ant &
- ~first_antenna(priv->hw_params.valid_tx_ant);
+ priv->eeprom_data->valid_tx_ant &
+ ~first_antenna(priv->eeprom_data->valid_tx_ant);
if (!link_cmd->general_params.dual_stream_ant_msk) {
link_cmd->general_params.dual_stream_ant_msk = ANT_AB;
- } else if (num_of_ant(priv->hw_params.valid_tx_ant) == 2) {
+ } else if (num_of_ant(priv->eeprom_data->valid_tx_ant) == 2) {
link_cmd->general_params.dual_stream_ant_msk =
- priv->hw_params.valid_tx_ant;
+ priv->eeprom_data->valid_tx_ant;
}
link_cmd->agg_params.agg_dis_start_th =
#include <net/cfg80211.h>
#include <net/mac80211.h>
#include <net/netlink.h>
-
-#include "iwl-dev.h"
#include "iwl-debug.h"
#include "iwl-io.h"
-#include "iwl-agn.h"
-#include "iwl-testmode.h"
#include "iwl-trans.h"
#include "iwl-fh.h"
#include "iwl-prph.h"
+#include "dev.h"
+#include "agn.h"
+#include "testmode.h"
/* Periphery registers absolute lower bound. This is used in order to
/* The TLVs used in the gnl message policy between the kernel module and
* user space application. iwl_testmode_gnl_msg_policy is to be carried
* through the NL80211_CMD_TESTMODE channel regulated by nl80211.
- * See iwl-testmode.h
+ * See testmode.h
*/
static
struct nla_policy iwl_testmode_gnl_msg_policy[IWL_TM_ATTR_MAX] = {
};
/*
- * See the struct iwl_rx_packet in iwl-commands.h for the format of the
+ * See the struct iwl_rx_packet in commands.h for the format of the
* received events from the device
*/
static inline int get_event_length(struct iwl_rx_cmd_buffer *rxb)
break;
case IWL_TM_CMD_APP2DEV_GET_EEPROM:
- if (priv->eeprom) {
+ if (priv->eeprom_blob) {
skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy,
- priv->cfg->base_params->eeprom_size + 20);
+ priv->eeprom_blob_size + 20);
if (!skb) {
IWL_ERR(priv, "Memory allocation fail\n");
return -ENOMEM;
if (nla_put_u32(skb, IWL_TM_ATTR_COMMAND,
IWL_TM_CMD_DEV2APP_EEPROM_RSP) ||
nla_put(skb, IWL_TM_ATTR_EEPROM,
- priv->cfg->base_params->eeprom_size,
- priv->eeprom))
+ priv->eeprom_blob_size,
+ priv->eeprom_blob))
goto nla_put_failure;
status = cfg80211_testmode_reply(skb);
if (status < 0)
IWL_ERR(priv, "Error sending msg : %d\n",
status);
} else
- return -EFAULT;
+ return -ENODATA;
break;
case IWL_TM_CMD_APP2DEV_FIXRATE_REQ:
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
-
#include <net/mac80211.h>
-
-#include "iwl-agn.h"
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
#include "iwl-io.h"
-#include "iwl-commands.h"
-#include "iwl-debug.h"
-#include "iwl-agn-tt.h"
#include "iwl-modparams.h"
+#include "iwl-debug.h"
+#include "agn.h"
+#include "dev.h"
+#include "commands.h"
+#include "tt.h"
/* default Thermal Throttling transaction table
* Current state | Throttling Down | Throttling Up
#ifndef __iwl_tt_setting_h__
#define __iwl_tt_setting_h__
-#include "iwl-commands.h"
+#include "commands.h"
#define IWL_ABSOLUTE_ZERO 0
#define IWL_ABSOLUTE_MAX 0xFFFFFFFF
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ieee80211.h>
-
-#include "iwl-dev.h"
#include "iwl-io.h"
-#include "iwl-agn-hw.h"
-#include "iwl-agn.h"
#include "iwl-trans.h"
+#include "iwl-agn-hw.h"
+#include "dev.h"
+#include "agn.h"
static const u8 tid_to_ac[] = {
IEEE80211_AC_BE,
rate_idx = info->control.rates[0].idx;
if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS ||
(rate_idx < 0) || (rate_idx > IWL_RATE_COUNT_LEGACY))
- rate_idx = rate_lowest_index(&priv->bands[info->band],
+ rate_idx = rate_lowest_index(
+ &priv->eeprom_data->bands[info->band],
info->control.sta);
/* For 5 GHZ band, remap mac80211 rate indices into driver indices */
if (info->band == IEEE80211_BAND_5GHZ)
priv->bt_full_concurrent) {
/* operated as 1x1 in full concurrency mode */
priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
- first_antenna(priv->hw_params.valid_tx_ant));
+ first_antenna(priv->eeprom_data->valid_tx_ant));
} else
- priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
- priv->hw_params.valid_tx_ant);
+ priv->mgmt_tx_ant = iwl_toggle_tx_ant(
+ priv, priv->mgmt_tx_ant,
+ priv->eeprom_data->valid_tx_ant);
rate_flags |= iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
/* Set the rate in the TX cmd */
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct iwl_station_priv *sta_priv = NULL;
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct iwl_device_cmd *dev_cmd = NULL;
+ struct iwl_device_cmd *dev_cmd;
struct iwl_tx_cmd *tx_cmd;
__le16 fc;
u8 hdr_len;
if (info->flags & IEEE80211_TX_CTL_AMPDU)
is_agg = true;
- dev_cmd = kmem_cache_alloc(iwl_tx_cmd_pool, GFP_ATOMIC);
+ dev_cmd = iwl_trans_alloc_tx_cmd(priv->trans);
if (unlikely(!dev_cmd))
goto drop_unlock_priv;
if (sta_priv && sta_priv->client && !is_agg)
atomic_inc(&sta_priv->pending_frames);
+ if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN)
+ iwl_scan_offchannel_skb(priv);
+
return 0;
drop_unlock_sta:
if (dev_cmd)
- kmem_cache_free(iwl_tx_cmd_pool, dev_cmd);
+ iwl_trans_free_tx_cmd(priv->trans, dev_cmd);
spin_unlock(&priv->sta_lock);
drop_unlock_priv:
return -1;
* time, or we hadn't time to drain the AC queues.
*/
if (agg_state == IWL_AGG_ON)
- iwl_trans_tx_agg_disable(priv->trans, txq_id);
+ iwl_trans_txq_disable(priv->trans, txq_id);
else
IWL_DEBUG_TX_QUEUES(priv, "Don't disable tx agg: %d\n",
agg_state);
fifo = ctx->ac_to_fifo[tid_to_ac[tid]];
- iwl_trans_tx_agg_setup(priv->trans, q, fifo,
- sta_priv->sta_id, tid,
- buf_size, ssn);
+ iwl_trans_txq_enable(priv->trans, q, fifo, sta_priv->sta_id, tid,
+ buf_size, ssn);
/*
* If the limit is 0, then it wasn't initialised yet,
IWL_DEBUG_TX_QUEUES(priv,
"Can continue DELBA flow ssn = next_recl ="
" %d", tid_data->next_reclaimed);
- iwl_trans_tx_agg_disable(priv->trans,
- tid_data->agg.txq_id);
+ iwl_trans_txq_disable(priv->trans,
+ tid_data->agg.txq_id);
iwlagn_dealloc_agg_txq(priv, tid_data->agg.txq_id);
tid_data->agg.state = IWL_AGG_OFF;
ieee80211_stop_tx_ba_cb_irqsafe(vif, addr, tid);
struct sk_buff *skb;
struct iwl_rxon_context *ctx;
bool is_agg = (txq_id >= IWLAGN_FIRST_AMPDU_QUEUE);
+ bool is_offchannel_skb;
tid = (tx_resp->ra_tid & IWLAGN_TX_RES_TID_MSK) >>
IWLAGN_TX_RES_TID_POS;
__skb_queue_head_init(&skbs);
+ is_offchannel_skb = false;
+
if (tx_resp->frame_count == 1) {
u16 next_reclaimed = le16_to_cpu(tx_resp->seq_ctl);
next_reclaimed = SEQ_TO_SN(next_reclaimed + 0x10);
info = IEEE80211_SKB_CB(skb);
ctx = info->driver_data[0];
- kmem_cache_free(iwl_tx_cmd_pool,
- (info->driver_data[1]));
+ iwl_trans_free_tx_cmd(priv->trans,
+ info->driver_data[1]);
memset(&info->status, 0, sizeof(info->status));
if (!is_agg)
iwlagn_non_agg_tx_status(priv, ctx, hdr->addr1);
+ is_offchannel_skb =
+ (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN);
freed++;
}
WARN_ON(!is_agg && freed != 1);
+
+ /*
+ * An offchannel frame can be send only on the AUX queue, where
+ * there is no aggregation (and reordering) so it only is single
+ * skb is expected to be processed.
+ */
+ WARN_ON(is_offchannel_skb && freed != 1);
}
iwl_check_abort_status(priv, tx_resp->frame_count, status);
ieee80211_tx_status(priv->hw, skb);
}
+ if (is_offchannel_skb)
+ iwl_scan_offchannel_skb_status(priv);
+
return 0;
}
WARN_ON_ONCE(1);
info = IEEE80211_SKB_CB(skb);
- kmem_cache_free(iwl_tx_cmd_pool, (info->driver_data[1]));
+ iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]);
if (freed == 1) {
/* this is the first skb we deliver in this batch */
#include <linux/kernel.h>
#include <linux/init.h>
-#include "iwl-dev.h"
#include "iwl-io.h"
#include "iwl-agn-hw.h"
-#include "iwl-agn.h"
-#include "iwl-agn-calib.h"
#include "iwl-trans.h"
#include "iwl-fh.h"
#include "iwl-op-mode.h"
+#include "dev.h"
+#include "agn.h"
+#include "calib.h"
+
/******************************************************************************
*
* uCode download functions
static int iwl_set_Xtal_calib(struct iwl_priv *priv)
{
struct iwl_calib_xtal_freq_cmd cmd;
- __le16 *xtal_calib =
- (__le16 *)iwl_eeprom_query_addr(priv, EEPROM_XTAL);
+ __le16 *xtal_calib = priv->eeprom_data->xtal_calib;
iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD);
cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]);
static int iwl_set_temperature_offset_calib(struct iwl_priv *priv)
{
struct iwl_calib_temperature_offset_cmd cmd;
- __le16 *offset_calib =
- (__le16 *)iwl_eeprom_query_addr(priv, EEPROM_RAW_TEMPERATURE);
memset(&cmd, 0, sizeof(cmd));
iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
- memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(*offset_calib));
+ cmd.radio_sensor_offset = priv->eeprom_data->raw_temperature;
if (!(cmd.radio_sensor_offset))
cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET;
static int iwl_set_temperature_offset_calib_v2(struct iwl_priv *priv)
{
struct iwl_calib_temperature_offset_v2_cmd cmd;
- __le16 *offset_calib_high = (__le16 *)iwl_eeprom_query_addr(priv,
- EEPROM_KELVIN_TEMPERATURE);
- __le16 *offset_calib_low =
- (__le16 *)iwl_eeprom_query_addr(priv, EEPROM_RAW_TEMPERATURE);
- struct iwl_eeprom_calib_hdr *hdr;
memset(&cmd, 0, sizeof(cmd));
iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
- hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv,
- EEPROM_CALIB_ALL);
- memcpy(&cmd.radio_sensor_offset_high, offset_calib_high,
- sizeof(*offset_calib_high));
- memcpy(&cmd.radio_sensor_offset_low, offset_calib_low,
- sizeof(*offset_calib_low));
- if (!(cmd.radio_sensor_offset_low)) {
+ cmd.radio_sensor_offset_high = priv->eeprom_data->kelvin_temperature;
+ cmd.radio_sensor_offset_low = priv->eeprom_data->raw_temperature;
+ if (!cmd.radio_sensor_offset_low) {
IWL_DEBUG_CALIB(priv, "no info in EEPROM, use default\n");
cmd.radio_sensor_offset_low = DEFAULT_RADIO_SENSOR_OFFSET;
cmd.radio_sensor_offset_high = DEFAULT_RADIO_SENSOR_OFFSET;
}
- memcpy(&cmd.burntVoltageRef, &hdr->voltage,
- sizeof(hdr->voltage));
+ cmd.burntVoltageRef = priv->eeprom_data->calib_voltage;
IWL_DEBUG_CALIB(priv, "Radio sensor offset high: %d\n",
le16_to_cpu(cmd.radio_sensor_offset_high));
return 0;
}
-int iwl_send_wimax_coex(struct iwl_priv *priv)
+static int iwl_send_wimax_coex(struct iwl_priv *priv)
{
struct iwl_wimax_coex_cmd coex_cmd;
#define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE 0
/* TX queue watchdog timeouts in mSecs */
-#define IWL_WATCHHDOG_DISABLED 0
+#define IWL_WATCHDOG_DISABLED 0
#define IWL_DEF_WD_TIMEOUT 2000
#define IWL_LONG_WD_TIMEOUT 10000
#define IWL_MAX_WD_TIMEOUT 120000
bool bt_sco_disable;
bool bt_session_2;
};
+
/*
* @use_rts_for_aggregation: use rts/cts protection for HT traffic
+ * @ht40_bands: bitmap of bands (using %IEEE80211_BAND_*) that support HT40
*/
struct iwl_ht_params {
+ enum ieee80211_smps_mode smps_mode;
const bool ht_greenfield_support; /* if used set to true */
bool use_rts_for_aggregation;
- enum ieee80211_smps_mode smps_mode;
+ u8 ht40_bands;
+};
+
+/*
+ * information on how to parse the EEPROM
+ */
+#define EEPROM_REG_BAND_1_CHANNELS 0x08
+#define EEPROM_REG_BAND_2_CHANNELS 0x26
+#define EEPROM_REG_BAND_3_CHANNELS 0x42
+#define EEPROM_REG_BAND_4_CHANNELS 0x5C
+#define EEPROM_REG_BAND_5_CHANNELS 0x74
+#define EEPROM_REG_BAND_24_HT40_CHANNELS 0x82
+#define EEPROM_REG_BAND_52_HT40_CHANNELS 0x92
+#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS 0x80
+#define EEPROM_REGULATORY_BAND_NO_HT40 0
+
+struct iwl_eeprom_params {
+ const u8 regulatory_bands[7];
+ bool enhanced_txpower;
};
/**
/* params likely to change within a device family */
const struct iwl_ht_params *ht_params;
const struct iwl_bt_params *bt_params;
+ const struct iwl_eeprom_params *eeprom_params;
const bool need_temp_offset_calib; /* if used set to true */
const bool no_xtal_calib;
enum iwl_led_mode led_mode;
/*
* Hardware revision info
* Bit fields:
- * 31-8: Reserved
- * 7-4: Type of device: see CSR_HW_REV_TYPE_xxx definitions
+ * 31-16: Reserved
+ * 15-4: Type of device: see CSR_HW_REV_TYPE_xxx definitions
* 3-2: Revision step: 0 = A, 1 = B, 2 = C, 3 = D
* 1-0: "Dash" (-) value, as in A-1, etc.
- *
- * NOTE: Revision step affects calculation of CCK txpower for 4965.
- * NOTE: See also CSR_HW_REV_WA_REG (work-around for bug in 4965).
*/
#define CSR_HW_REV (CSR_BASE+0x028)
#define CSR_DBG_LINK_PWR_MGMT_REG (CSR_BASE+0x250)
/* Bits for CSR_HW_IF_CONFIG_REG */
-#define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00)
-#define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100)
+#define CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH (0x00000003)
+#define CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP (0x0000000C)
+#define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x000000C0)
+#define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100)
#define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200)
+#define CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE (0x00000C00)
+#define CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH (0x00003000)
+#define CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP (0x0000C000)
+
+#define CSR_HW_IF_CONFIG_REG_POS_MAC_DASH (0)
+#define CSR_HW_IF_CONFIG_REG_POS_MAC_STEP (2)
+#define CSR_HW_IF_CONFIG_REG_POS_BOARD_VER (6)
+#define CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE (10)
+#define CSR_HW_IF_CONFIG_REG_POS_PHY_DASH (12)
+#define CSR_HW_IF_CONFIG_REG_POS_PHY_STEP (14)
#define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000)
#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000)
/* HW REV */
-#define CSR_HW_REV_TYPE_MSK (0x00001F0)
+#define CSR_HW_REV_DASH(_val) (((_val) & 0x0000003) >> 0)
+#define CSR_HW_REV_STEP(_val) (((_val) & 0x000000C) >> 2)
+
+#define CSR_HW_REV_TYPE_MSK (0x000FFF0)
#define CSR_HW_REV_TYPE_5300 (0x0000020)
#define CSR_HW_REV_TYPE_5350 (0x0000030)
#define CSR_HW_REV_TYPE_5100 (0x0000050)
/* No matter what is m (priv, bus, trans), this will work */
#define IWL_ERR(m, f, a...) __iwl_err((m)->dev, false, false, f, ## a)
+#define IWL_ERR_DEV(d, f, a...) __iwl_err((d), false, false, f, ## a)
#define IWL_WARN(m, f, a...) __iwl_warn((m)->dev, f, ## a)
#define IWL_INFO(m, f, a...) __iwl_info((m)->dev, f, ## a)
#define IWL_CRIT(m, f, a...) __iwl_crit((m)->dev, f, ## a)
#define IWL_DEBUG(m, level, fmt, args...) \
__iwl_dbg((m)->dev, level, false, __func__, fmt, ##args)
+#define IWL_DEBUG_DEV(dev, level, fmt, args...) \
+ __iwl_dbg((dev), level, false, __func__, fmt, ##args)
#define IWL_DEBUG_LIMIT(m, level, fmt, args...) \
__iwl_dbg((m)->dev, level, true, __func__, fmt, ##args)
#define IWL_DEBUG_LED(p, f, a...) IWL_DEBUG(p, IWL_DL_LED, f, ## a)
#define IWL_DEBUG_WEP(p, f, a...) IWL_DEBUG(p, IWL_DL_WEP, f, ## a)
#define IWL_DEBUG_HC(p, f, a...) IWL_DEBUG(p, IWL_DL_HCMD, f, ## a)
-#define IWL_DEBUG_EEPROM(p, f, a...) IWL_DEBUG(p, IWL_DL_EEPROM, f, ## a)
+#define IWL_DEBUG_EEPROM(d, f, a...) IWL_DEBUG_DEV(d, IWL_DL_EEPROM, f, ## a)
#define IWL_DEBUG_CALIB(p, f, a...) IWL_DEBUG(p, IWL_DL_CALIB, f, ## a)
#define IWL_DEBUG_FW(p, f, a...) IWL_DEBUG(p, IWL_DL_FW, f, ## a)
#define IWL_DEBUG_RF_KILL(p, f, a...) IWL_DEBUG(p, IWL_DL_RF_KILL, f, ## a)
#define __IWLWIFI_DEVICE_TRACE
#include <linux/tracepoint.h>
+#include <linux/device.h>
#if !defined(CONFIG_IWLWIFI_DEVICE_TRACING) || defined(__CHECKER__)
--- /dev/null
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include "iwl-modparams.h"
+#include "iwl-eeprom-parse.h"
+
+/* EEPROM offset definitions */
+
+/* indirect access definitions */
+#define ADDRESS_MSK 0x0000FFFF
+#define INDIRECT_TYPE_MSK 0x000F0000
+#define INDIRECT_HOST 0x00010000
+#define INDIRECT_GENERAL 0x00020000
+#define INDIRECT_REGULATORY 0x00030000
+#define INDIRECT_CALIBRATION 0x00040000
+#define INDIRECT_PROCESS_ADJST 0x00050000
+#define INDIRECT_OTHERS 0x00060000
+#define INDIRECT_TXP_LIMIT 0x00070000
+#define INDIRECT_TXP_LIMIT_SIZE 0x00080000
+#define INDIRECT_ADDRESS 0x00100000
+
+/* corresponding link offsets in EEPROM */
+#define EEPROM_LINK_HOST (2*0x64)
+#define EEPROM_LINK_GENERAL (2*0x65)
+#define EEPROM_LINK_REGULATORY (2*0x66)
+#define EEPROM_LINK_CALIBRATION (2*0x67)
+#define EEPROM_LINK_PROCESS_ADJST (2*0x68)
+#define EEPROM_LINK_OTHERS (2*0x69)
+#define EEPROM_LINK_TXP_LIMIT (2*0x6a)
+#define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b)
+
+/* General */
+#define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */
+#define EEPROM_SUBSYSTEM_ID (2*0x0A) /* 2 bytes */
+#define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */
+#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */
+#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */
+#define EEPROM_VERSION (2*0x44) /* 2 bytes */
+#define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */
+#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */
+#define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */
+#define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */
+
+/* calibration */
+struct iwl_eeprom_calib_hdr {
+ u8 version;
+ u8 pa_type;
+ __le16 voltage;
+} __packed;
+
+#define EEPROM_CALIB_ALL (INDIRECT_ADDRESS | INDIRECT_CALIBRATION)
+#define EEPROM_XTAL ((2*0x128) | EEPROM_CALIB_ALL)
+
+/* temperature */
+#define EEPROM_KELVIN_TEMPERATURE ((2*0x12A) | EEPROM_CALIB_ALL)
+#define EEPROM_RAW_TEMPERATURE ((2*0x12B) | EEPROM_CALIB_ALL)
+
+/*
+ * EEPROM bands
+ * These are the channel numbers from each band in the order
+ * that they are stored in the EEPROM band information. Note
+ * that EEPROM bands aren't the same as mac80211 bands, and
+ * there are even special "ht40 bands" in the EEPROM.
+ */
+static const u8 iwl_eeprom_band_1[14] = { /* 2.4 GHz */
+ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
+};
+
+static const u8 iwl_eeprom_band_2[] = { /* 4915-5080MHz */
+ 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
+};
+
+static const u8 iwl_eeprom_band_3[] = { /* 5170-5320MHz */
+ 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
+};
+
+static const u8 iwl_eeprom_band_4[] = { /* 5500-5700MHz */
+ 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
+};
+
+static const u8 iwl_eeprom_band_5[] = { /* 5725-5825MHz */
+ 145, 149, 153, 157, 161, 165
+};
+
+static const u8 iwl_eeprom_band_6[] = { /* 2.4 ht40 channel */
+ 1, 2, 3, 4, 5, 6, 7
+};
+
+static const u8 iwl_eeprom_band_7[] = { /* 5.2 ht40 channel */
+ 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157
+};
+
+#define IWL_NUM_CHANNELS (ARRAY_SIZE(iwl_eeprom_band_1) + \
+ ARRAY_SIZE(iwl_eeprom_band_2) + \
+ ARRAY_SIZE(iwl_eeprom_band_3) + \
+ ARRAY_SIZE(iwl_eeprom_band_4) + \
+ ARRAY_SIZE(iwl_eeprom_band_5))
+
+/* rate data (static) */
+static struct ieee80211_rate iwl_cfg80211_rates[] = {
+ { .bitrate = 1 * 10, .hw_value = 0, .hw_value_short = 0, },
+ { .bitrate = 2 * 10, .hw_value = 1, .hw_value_short = 1,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE, },
+ { .bitrate = 5.5 * 10, .hw_value = 2, .hw_value_short = 2,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE, },
+ { .bitrate = 11 * 10, .hw_value = 3, .hw_value_short = 3,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE, },
+ { .bitrate = 6 * 10, .hw_value = 4, .hw_value_short = 4, },
+ { .bitrate = 9 * 10, .hw_value = 5, .hw_value_short = 5, },
+ { .bitrate = 12 * 10, .hw_value = 6, .hw_value_short = 6, },
+ { .bitrate = 18 * 10, .hw_value = 7, .hw_value_short = 7, },
+ { .bitrate = 24 * 10, .hw_value = 8, .hw_value_short = 8, },
+ { .bitrate = 36 * 10, .hw_value = 9, .hw_value_short = 9, },
+ { .bitrate = 48 * 10, .hw_value = 10, .hw_value_short = 10, },
+ { .bitrate = 54 * 10, .hw_value = 11, .hw_value_short = 11, },
+};
+#define RATES_24_OFFS 0
+#define N_RATES_24 ARRAY_SIZE(iwl_cfg80211_rates)
+#define RATES_52_OFFS 4
+#define N_RATES_52 (N_RATES_24 - RATES_52_OFFS)
+
+/* EEPROM reading functions */
+
+static u16 iwl_eeprom_query16(const u8 *eeprom, size_t eeprom_size, int offset)
+{
+ if (WARN_ON(offset + sizeof(u16) > eeprom_size))
+ return 0;
+ return le16_to_cpup((__le16 *)(eeprom + offset));
+}
+
+static u32 eeprom_indirect_address(const u8 *eeprom, size_t eeprom_size,
+ u32 address)
+{
+ u16 offset = 0;
+
+ if ((address & INDIRECT_ADDRESS) == 0)
+ return address;
+
+ switch (address & INDIRECT_TYPE_MSK) {
+ case INDIRECT_HOST:
+ offset = iwl_eeprom_query16(eeprom, eeprom_size,
+ EEPROM_LINK_HOST);
+ break;
+ case INDIRECT_GENERAL:
+ offset = iwl_eeprom_query16(eeprom, eeprom_size,
+ EEPROM_LINK_GENERAL);
+ break;
+ case INDIRECT_REGULATORY:
+ offset = iwl_eeprom_query16(eeprom, eeprom_size,
+ EEPROM_LINK_REGULATORY);
+ break;
+ case INDIRECT_TXP_LIMIT:
+ offset = iwl_eeprom_query16(eeprom, eeprom_size,
+ EEPROM_LINK_TXP_LIMIT);
+ break;
+ case INDIRECT_TXP_LIMIT_SIZE:
+ offset = iwl_eeprom_query16(eeprom, eeprom_size,
+ EEPROM_LINK_TXP_LIMIT_SIZE);
+ break;
+ case INDIRECT_CALIBRATION:
+ offset = iwl_eeprom_query16(eeprom, eeprom_size,
+ EEPROM_LINK_CALIBRATION);
+ break;
+ case INDIRECT_PROCESS_ADJST:
+ offset = iwl_eeprom_query16(eeprom, eeprom_size,
+ EEPROM_LINK_PROCESS_ADJST);
+ break;
+ case INDIRECT_OTHERS:
+ offset = iwl_eeprom_query16(eeprom, eeprom_size,
+ EEPROM_LINK_OTHERS);
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+
+ /* translate the offset from words to byte */
+ return (address & ADDRESS_MSK) + (offset << 1);
+}
+
+static const u8 *iwl_eeprom_query_addr(const u8 *eeprom, size_t eeprom_size,
+ u32 offset)
+{
+ u32 address = eeprom_indirect_address(eeprom, eeprom_size, offset);
+
+ if (WARN_ON(address >= eeprom_size))
+ return NULL;
+
+ return &eeprom[address];
+}
+
+static int iwl_eeprom_read_calib(const u8 *eeprom, size_t eeprom_size,
+ struct iwl_eeprom_data *data)
+{
+ struct iwl_eeprom_calib_hdr *hdr;
+
+ hdr = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size,
+ EEPROM_CALIB_ALL);
+ if (!hdr)
+ return -ENODATA;
+ data->calib_version = hdr->version;
+ data->calib_voltage = hdr->voltage;
+
+ return 0;
+}
+
+/**
+ * enum iwl_eeprom_channel_flags - channel flags in EEPROM
+ * @EEPROM_CHANNEL_VALID: channel is usable for this SKU/geo
+ * @EEPROM_CHANNEL_IBSS: usable as an IBSS channel
+ * @EEPROM_CHANNEL_ACTIVE: active scanning allowed
+ * @EEPROM_CHANNEL_RADAR: radar detection required
+ * @EEPROM_CHANNEL_WIDE: 20 MHz channel okay (?)
+ * @EEPROM_CHANNEL_DFS: dynamic freq selection candidate
+ */
+enum iwl_eeprom_channel_flags {
+ EEPROM_CHANNEL_VALID = BIT(0),
+ EEPROM_CHANNEL_IBSS = BIT(1),
+ EEPROM_CHANNEL_ACTIVE = BIT(3),
+ EEPROM_CHANNEL_RADAR = BIT(4),
+ EEPROM_CHANNEL_WIDE = BIT(5),
+ EEPROM_CHANNEL_DFS = BIT(7),
+};
+
+/**
+ * struct iwl_eeprom_channel - EEPROM channel data
+ * @flags: %EEPROM_CHANNEL_* flags
+ * @max_power_avg: max power (in dBm) on this channel, at most 31 dBm
+ */
+struct iwl_eeprom_channel {
+ u8 flags;
+ s8 max_power_avg;
+} __packed;
+
+
+enum iwl_eeprom_enhanced_txpwr_flags {
+ IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0),
+ IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1),
+ IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2),
+ IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3),
+ IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4),
+ IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5),
+ IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6),
+ IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7),
+};
+
+/**
+ * iwl_eeprom_enhanced_txpwr structure
+ * @flags: entry flags
+ * @channel: channel number
+ * @chain_a_max_pwr: chain a max power in 1/2 dBm
+ * @chain_b_max_pwr: chain b max power in 1/2 dBm
+ * @chain_c_max_pwr: chain c max power in 1/2 dBm
+ * @delta_20_in_40: 20-in-40 deltas (hi/lo)
+ * @mimo2_max_pwr: mimo2 max power in 1/2 dBm
+ * @mimo3_max_pwr: mimo3 max power in 1/2 dBm
+ *
+ * This structure presents the enhanced regulatory tx power limit layout
+ * in an EEPROM image.
+ */
+struct iwl_eeprom_enhanced_txpwr {
+ u8 flags;
+ u8 channel;
+ s8 chain_a_max;
+ s8 chain_b_max;
+ s8 chain_c_max;
+ u8 delta_20_in_40;
+ s8 mimo2_max;
+ s8 mimo3_max;
+} __packed;
+
+static s8 iwl_get_max_txpwr_half_dbm(const struct iwl_eeprom_data *data,
+ struct iwl_eeprom_enhanced_txpwr *txp)
+{
+ s8 result = 0; /* (.5 dBm) */
+
+ /* Take the highest tx power from any valid chains */
+ if (data->valid_tx_ant & ANT_A && txp->chain_a_max > result)
+ result = txp->chain_a_max;
+
+ if (data->valid_tx_ant & ANT_B && txp->chain_b_max > result)
+ result = txp->chain_b_max;
+
+ if (data->valid_tx_ant & ANT_C && txp->chain_c_max > result)
+ result = txp->chain_c_max;
+
+ if ((data->valid_tx_ant == ANT_AB ||
+ data->valid_tx_ant == ANT_BC ||
+ data->valid_tx_ant == ANT_AC) && txp->mimo2_max > result)
+ result = txp->mimo2_max;
+
+ if (data->valid_tx_ant == ANT_ABC && txp->mimo3_max > result)
+ result = txp->mimo3_max;
+
+ return result;
+}
+
+#define EEPROM_TXP_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT)
+#define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr)
+#define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE)
+
+#define TXP_CHECK_AND_PRINT(x) \
+ ((txp->flags & IWL_EEPROM_ENH_TXP_FL_##x) ? # x " " : "")
+
+static void
+iwl_eeprom_enh_txp_read_element(struct iwl_eeprom_data *data,
+ struct iwl_eeprom_enhanced_txpwr *txp,
+ int n_channels, s8 max_txpower_avg)
+{
+ int ch_idx;
+ enum ieee80211_band band;
+
+ band = txp->flags & IWL_EEPROM_ENH_TXP_FL_BAND_52G ?
+ IEEE80211_BAND_5GHZ : IEEE80211_BAND_2GHZ;
+
+ for (ch_idx = 0; ch_idx < n_channels; ch_idx++) {
+ struct ieee80211_channel *chan = &data->channels[ch_idx];
+
+ /* update matching channel or from common data only */
+ if (txp->channel != 0 && chan->hw_value != txp->channel)
+ continue;
+
+ /* update matching band only */
+ if (band != chan->band)
+ continue;
+
+ if (chan->max_power < max_txpower_avg &&
+ !(txp->flags & IWL_EEPROM_ENH_TXP_FL_40MHZ))
+ chan->max_power = max_txpower_avg;
+ }
+}
+
+static void iwl_eeprom_enhanced_txpower(struct device *dev,
+ struct iwl_eeprom_data *data,
+ const u8 *eeprom, size_t eeprom_size,
+ int n_channels)
+{
+ struct iwl_eeprom_enhanced_txpwr *txp_array, *txp;
+ int idx, entries;
+ __le16 *txp_len;
+ s8 max_txp_avg_halfdbm;
+
+ BUILD_BUG_ON(sizeof(struct iwl_eeprom_enhanced_txpwr) != 8);
+
+ /* the length is in 16-bit words, but we want entries */
+ txp_len = (__le16 *)iwl_eeprom_query_addr(eeprom, eeprom_size,
+ EEPROM_TXP_SZ_OFFS);
+ entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN;
+
+ txp_array = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size,
+ EEPROM_TXP_OFFS);
+
+ for (idx = 0; idx < entries; idx++) {
+ txp = &txp_array[idx];
+ /* skip invalid entries */
+ if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID))
+ continue;
+
+ IWL_DEBUG_EEPROM(dev, "%s %d:\t %s%s%s%s%s%s%s%s (0x%02x)\n",
+ (txp->channel && (txp->flags &
+ IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE)) ?
+ "Common " : (txp->channel) ?
+ "Channel" : "Common",
+ (txp->channel),
+ TXP_CHECK_AND_PRINT(VALID),
+ TXP_CHECK_AND_PRINT(BAND_52G),
+ TXP_CHECK_AND_PRINT(OFDM),
+ TXP_CHECK_AND_PRINT(40MHZ),
+ TXP_CHECK_AND_PRINT(HT_AP),
+ TXP_CHECK_AND_PRINT(RES1),
+ TXP_CHECK_AND_PRINT(RES2),
+ TXP_CHECK_AND_PRINT(COMMON_TYPE),
+ txp->flags);
+ IWL_DEBUG_EEPROM(dev,
+ "\t\t chain_A: 0x%02x chain_B: 0X%02x chain_C: 0X%02x\n",
+ txp->chain_a_max, txp->chain_b_max,
+ txp->chain_c_max);
+ IWL_DEBUG_EEPROM(dev,
+ "\t\t MIMO2: 0x%02x MIMO3: 0x%02x High 20_on_40: 0x%02x Low 20_on_40: 0x%02x\n",
+ txp->mimo2_max, txp->mimo3_max,
+ ((txp->delta_20_in_40 & 0xf0) >> 4),
+ (txp->delta_20_in_40 & 0x0f));
+
+ max_txp_avg_halfdbm = iwl_get_max_txpwr_half_dbm(data, txp);
+
+ iwl_eeprom_enh_txp_read_element(data, txp, n_channels,
+ DIV_ROUND_UP(max_txp_avg_halfdbm, 2));
+
+ if (max_txp_avg_halfdbm > data->max_tx_pwr_half_dbm)
+ data->max_tx_pwr_half_dbm = max_txp_avg_halfdbm;
+ }
+}
+
+static void iwl_init_band_reference(const struct iwl_cfg *cfg,
+ const u8 *eeprom, size_t eeprom_size,
+ int eeprom_band, int *eeprom_ch_count,
+ const struct iwl_eeprom_channel **ch_info,
+ const u8 **eeprom_ch_array)
+{
+ u32 offset = cfg->eeprom_params->regulatory_bands[eeprom_band - 1];
+
+ offset |= INDIRECT_ADDRESS | INDIRECT_REGULATORY;
+
+ *ch_info = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size, offset);
+
+ switch (eeprom_band) {
+ case 1: /* 2.4GHz band */
+ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_1);
+ *eeprom_ch_array = iwl_eeprom_band_1;
+ break;
+ case 2: /* 4.9GHz band */
+ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_2);
+ *eeprom_ch_array = iwl_eeprom_band_2;
+ break;
+ case 3: /* 5.2GHz band */
+ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_3);
+ *eeprom_ch_array = iwl_eeprom_band_3;
+ break;
+ case 4: /* 5.5GHz band */
+ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_4);
+ *eeprom_ch_array = iwl_eeprom_band_4;
+ break;
+ case 5: /* 5.7GHz band */
+ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_5);
+ *eeprom_ch_array = iwl_eeprom_band_5;
+ break;
+ case 6: /* 2.4GHz ht40 channels */
+ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6);
+ *eeprom_ch_array = iwl_eeprom_band_6;
+ break;
+ case 7: /* 5 GHz ht40 channels */
+ *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7);
+ *eeprom_ch_array = iwl_eeprom_band_7;
+ break;
+ default:
+ *eeprom_ch_count = 0;
+ *eeprom_ch_array = NULL;
+ WARN_ON(1);
+ }
+}
+
+#define CHECK_AND_PRINT(x) \
+ ((eeprom_ch->flags & EEPROM_CHANNEL_##x) ? # x " " : "")
+
+static void iwl_mod_ht40_chan_info(struct device *dev,
+ struct iwl_eeprom_data *data, int n_channels,
+ enum ieee80211_band band, u16 channel,
+ const struct iwl_eeprom_channel *eeprom_ch,
+ u8 clear_ht40_extension_channel)
+{
+ struct ieee80211_channel *chan = NULL;
+ int i;
+
+ for (i = 0; i < n_channels; i++) {
+ if (data->channels[i].band != band)
+ continue;
+ if (data->channels[i].hw_value != channel)
+ continue;
+ chan = &data->channels[i];
+ break;
+ }
+
+ if (!chan)
+ return;
+
+ IWL_DEBUG_EEPROM(dev,
+ "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n",
+ channel,
+ band == IEEE80211_BAND_5GHZ ? "5.2" : "2.4",
+ CHECK_AND_PRINT(IBSS),
+ CHECK_AND_PRINT(ACTIVE),
+ CHECK_AND_PRINT(RADAR),
+ CHECK_AND_PRINT(WIDE),
+ CHECK_AND_PRINT(DFS),
+ eeprom_ch->flags,
+ eeprom_ch->max_power_avg,
+ ((eeprom_ch->flags & EEPROM_CHANNEL_IBSS) &&
+ !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ? ""
+ : "not ");
+
+ if (eeprom_ch->flags & EEPROM_CHANNEL_VALID)
+ chan->flags &= ~clear_ht40_extension_channel;
+}
+
+#define CHECK_AND_PRINT_I(x) \
+ ((eeprom_ch_info[ch_idx].flags & EEPROM_CHANNEL_##x) ? # x " " : "")
+
+static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
+ struct iwl_eeprom_data *data,
+ const u8 *eeprom, size_t eeprom_size)
+{
+ int band, ch_idx;
+ const struct iwl_eeprom_channel *eeprom_ch_info;
+ const u8 *eeprom_ch_array;
+ int eeprom_ch_count;
+ int n_channels = 0;
+
+ /*
+ * Loop through the 5 EEPROM bands and add them to the parse list
+ */
+ for (band = 1; band <= 5; band++) {
+ struct ieee80211_channel *channel;
+
+ iwl_init_band_reference(cfg, eeprom, eeprom_size, band,
+ &eeprom_ch_count, &eeprom_ch_info,
+ &eeprom_ch_array);
+
+ /* Loop through each band adding each of the channels */
+ for (ch_idx = 0; ch_idx < eeprom_ch_count; ch_idx++) {
+ const struct iwl_eeprom_channel *eeprom_ch;
+
+ eeprom_ch = &eeprom_ch_info[ch_idx];
+
+ if (!(eeprom_ch->flags & EEPROM_CHANNEL_VALID)) {
+ IWL_DEBUG_EEPROM(dev,
+ "Ch. %d Flags %x [%sGHz] - No traffic\n",
+ eeprom_ch_array[ch_idx],
+ eeprom_ch_info[ch_idx].flags,
+ (band != 1) ? "5.2" : "2.4");
+ continue;
+ }
+
+ channel = &data->channels[n_channels];
+ n_channels++;
+
+ channel->hw_value = eeprom_ch_array[ch_idx];
+ channel->band = (band == 1) ? IEEE80211_BAND_2GHZ
+ : IEEE80211_BAND_5GHZ;
+ channel->center_freq =
+ ieee80211_channel_to_frequency(
+ channel->hw_value, channel->band);
+
+ /* set no-HT40, will enable as appropriate later */
+ channel->flags = IEEE80211_CHAN_NO_HT40;
+
+ if (!(eeprom_ch->flags & EEPROM_CHANNEL_IBSS))
+ channel->flags |= IEEE80211_CHAN_NO_IBSS;
+
+ if (!(eeprom_ch->flags & EEPROM_CHANNEL_ACTIVE))
+ channel->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+
+ if (eeprom_ch->flags & EEPROM_CHANNEL_RADAR)
+ channel->flags |= IEEE80211_CHAN_RADAR;
+
+ /* Initialize regulatory-based run-time data */
+ channel->max_power =
+ eeprom_ch_info[ch_idx].max_power_avg;
+ IWL_DEBUG_EEPROM(dev,
+ "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n",
+ channel->hw_value,
+ (band != 1) ? "5.2" : "2.4",
+ CHECK_AND_PRINT_I(VALID),
+ CHECK_AND_PRINT_I(IBSS),
+ CHECK_AND_PRINT_I(ACTIVE),
+ CHECK_AND_PRINT_I(RADAR),
+ CHECK_AND_PRINT_I(WIDE),
+ CHECK_AND_PRINT_I(DFS),
+ eeprom_ch_info[ch_idx].flags,
+ eeprom_ch_info[ch_idx].max_power_avg,
+ ((eeprom_ch_info[ch_idx].flags &
+ EEPROM_CHANNEL_IBSS) &&
+ !(eeprom_ch_info[ch_idx].flags &
+ EEPROM_CHANNEL_RADAR))
+ ? "" : "not ");
+ }
+ }
+
+ if (cfg->eeprom_params->enhanced_txpower) {
+ /*
+ * for newer device (6000 series and up)
+ * EEPROM contain enhanced tx power information
+ * driver need to process addition information
+ * to determine the max channel tx power limits
+ */
+ iwl_eeprom_enhanced_txpower(dev, data, eeprom, eeprom_size,
+ n_channels);
+ } else {
+ /* All others use data from channel map */
+ int i;
+
+ data->max_tx_pwr_half_dbm = -128;
+
+ for (i = 0; i < n_channels; i++)
+ data->max_tx_pwr_half_dbm =
+ max_t(s8, data->max_tx_pwr_half_dbm,
+ data->channels[i].max_power * 2);
+ }
+
+ /* Check if we do have HT40 channels */
+ if (cfg->eeprom_params->regulatory_bands[5] ==
+ EEPROM_REGULATORY_BAND_NO_HT40 &&
+ cfg->eeprom_params->regulatory_bands[6] ==
+ EEPROM_REGULATORY_BAND_NO_HT40)
+ return n_channels;
+
+ /* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */
+ for (band = 6; band <= 7; band++) {
+ enum ieee80211_band ieeeband;
+
+ iwl_init_band_reference(cfg, eeprom, eeprom_size, band,
+ &eeprom_ch_count, &eeprom_ch_info,
+ &eeprom_ch_array);
+
+ /* EEPROM band 6 is 2.4, band 7 is 5 GHz */
+ ieeeband = (band == 6) ? IEEE80211_BAND_2GHZ
+ : IEEE80211_BAND_5GHZ;
+
+ /* Loop through each band adding each of the channels */
+ for (ch_idx = 0; ch_idx < eeprom_ch_count; ch_idx++) {
+ /* Set up driver's info for lower half */
+ iwl_mod_ht40_chan_info(dev, data, n_channels, ieeeband,
+ eeprom_ch_array[ch_idx],
+ &eeprom_ch_info[ch_idx],
+ IEEE80211_CHAN_NO_HT40PLUS);
+
+ /* Set up driver's info for upper half */
+ iwl_mod_ht40_chan_info(dev, data, n_channels, ieeeband,
+ eeprom_ch_array[ch_idx] + 4,
+ &eeprom_ch_info[ch_idx],
+ IEEE80211_CHAN_NO_HT40MINUS);
+ }
+ }
+
+ return n_channels;
+}
+
+static int iwl_init_sband_channels(struct iwl_eeprom_data *data,
+ struct ieee80211_supported_band *sband,
+ int n_channels, enum ieee80211_band band)
+{
+ struct ieee80211_channel *chan = &data->channels[0];
+ int n = 0, idx = 0;
+
+ while (chan->band != band && idx < n_channels)
+ chan = &data->channels[++idx];
+
+ sband->channels = &data->channels[idx];
+
+ while (chan->band == band && idx < n_channels) {
+ chan = &data->channels[++idx];
+ n++;
+ }
+
+ sband->n_channels = n;
+
+ return n;
+}
+
+#define MAX_BIT_RATE_40_MHZ 150 /* Mbps */
+#define MAX_BIT_RATE_20_MHZ 72 /* Mbps */
+
+static void iwl_init_ht_hw_capab(const struct iwl_cfg *cfg,
+ struct iwl_eeprom_data *data,
+ struct ieee80211_sta_ht_cap *ht_info,
+ enum ieee80211_band band)
+{
+ int max_bit_rate = 0;
+ u8 rx_chains;
+ u8 tx_chains;
+
+ tx_chains = hweight8(data->valid_tx_ant);
+ if (cfg->rx_with_siso_diversity)
+ rx_chains = 1;
+ else
+ rx_chains = hweight8(data->valid_rx_ant);
+
+ if (!(data->sku & EEPROM_SKU_CAP_11N_ENABLE) || !cfg->ht_params) {
+ ht_info->ht_supported = false;
+ return;
+ }
+
+ ht_info->ht_supported = true;
+ ht_info->cap = 0;
+
+ if (iwlwifi_mod_params.amsdu_size_8K)
+ ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
+
+ ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+ ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_4;
+
+ ht_info->mcs.rx_mask[0] = 0xFF;
+ if (rx_chains >= 2)
+ ht_info->mcs.rx_mask[1] = 0xFF;
+ if (rx_chains >= 3)
+ ht_info->mcs.rx_mask[2] = 0xFF;
+
+ if (cfg->ht_params->ht_greenfield_support)
+ ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
+ ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
+
+ max_bit_rate = MAX_BIT_RATE_20_MHZ;
+
+ if (cfg->ht_params->ht40_bands & BIT(band)) {
+ ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ ht_info->cap |= IEEE80211_HT_CAP_SGI_40;
+ ht_info->mcs.rx_mask[4] = 0x01;
+ max_bit_rate = MAX_BIT_RATE_40_MHZ;
+ }
+
+ /* Highest supported Rx data rate */
+ max_bit_rate *= rx_chains;
+ WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK);
+ ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate);
+
+ /* Tx MCS capabilities */
+ ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+ if (tx_chains != rx_chains) {
+ ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
+ ht_info->mcs.tx_params |= ((tx_chains - 1) <<
+ IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
+ }
+}
+
+static void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg,
+ struct iwl_eeprom_data *data,
+ const u8 *eeprom, size_t eeprom_size)
+{
+ int n_channels = iwl_init_channel_map(dev, cfg, data,
+ eeprom, eeprom_size);
+ int n_used = 0;
+ struct ieee80211_supported_band *sband;
+
+ sband = &data->bands[IEEE80211_BAND_2GHZ];
+ sband->band = IEEE80211_BAND_2GHZ;
+ sband->bitrates = &iwl_cfg80211_rates[RATES_24_OFFS];
+ sband->n_bitrates = N_RATES_24;
+ n_used += iwl_init_sband_channels(data, sband, n_channels,
+ IEEE80211_BAND_2GHZ);
+ iwl_init_ht_hw_capab(cfg, data, &sband->ht_cap, IEEE80211_BAND_2GHZ);
+
+ sband = &data->bands[IEEE80211_BAND_5GHZ];
+ sband->band = IEEE80211_BAND_5GHZ;
+ sband->bitrates = &iwl_cfg80211_rates[RATES_52_OFFS];
+ sband->n_bitrates = N_RATES_52;
+ n_used += iwl_init_sband_channels(data, sband, n_channels,
+ IEEE80211_BAND_5GHZ);
+ iwl_init_ht_hw_capab(cfg, data, &sband->ht_cap, IEEE80211_BAND_5GHZ);
+
+ if (n_channels != n_used)
+ IWL_ERR_DEV(dev, "EEPROM: used only %d of %d channels\n",
+ n_used, n_channels);
+}
+
+/* EEPROM data functions */
+
+struct iwl_eeprom_data *
+iwl_parse_eeprom_data(struct device *dev, const struct iwl_cfg *cfg,
+ const u8 *eeprom, size_t eeprom_size)
+{
+ struct iwl_eeprom_data *data;
+ const void *tmp;
+
+ if (WARN_ON(!cfg || !cfg->eeprom_params))
+ return NULL;
+
+ data = kzalloc(sizeof(*data) +
+ sizeof(struct ieee80211_channel) * IWL_NUM_CHANNELS,
+ GFP_KERNEL);
+ if (!data)
+ return NULL;
+
+ /* get MAC address(es) */
+ tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, EEPROM_MAC_ADDRESS);
+ if (!tmp)
+ goto err_free;
+ memcpy(data->hw_addr, tmp, ETH_ALEN);
+ data->n_hw_addrs = iwl_eeprom_query16(eeprom, eeprom_size,
+ EEPROM_NUM_MAC_ADDRESS);
+
+ if (iwl_eeprom_read_calib(eeprom, eeprom_size, data))
+ goto err_free;
+
+ tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, EEPROM_XTAL);
+ if (!tmp)
+ goto err_free;
+ memcpy(data->xtal_calib, tmp, sizeof(data->xtal_calib));
+
+ tmp = iwl_eeprom_query_addr(eeprom, eeprom_size,
+ EEPROM_RAW_TEMPERATURE);
+ if (!tmp)
+ goto err_free;
+ data->raw_temperature = *(__le16 *)tmp;
+
+ tmp = iwl_eeprom_query_addr(eeprom, eeprom_size,
+ EEPROM_KELVIN_TEMPERATURE);
+ if (!tmp)
+ goto err_free;
+ data->kelvin_temperature = *(__le16 *)tmp;
+ data->kelvin_voltage = *((__le16 *)tmp + 1);
+
+ data->radio_cfg = iwl_eeprom_query16(eeprom, eeprom_size,
+ EEPROM_RADIO_CONFIG);
+ data->sku = iwl_eeprom_query16(eeprom, eeprom_size,
+ EEPROM_SKU_CAP);
+ data->eeprom_version = iwl_eeprom_query16(eeprom, eeprom_size,
+ EEPROM_VERSION);
+
+ data->valid_tx_ant = EEPROM_RF_CFG_TX_ANT_MSK(data->radio_cfg);
+ data->valid_rx_ant = EEPROM_RF_CFG_RX_ANT_MSK(data->radio_cfg);
+
+ /* check overrides (some devices have wrong EEPROM) */
+ if (cfg->valid_tx_ant)
+ data->valid_tx_ant = cfg->valid_tx_ant;
+ if (cfg->valid_rx_ant)
+ data->valid_rx_ant = cfg->valid_rx_ant;
+
+ if (!data->valid_tx_ant || !data->valid_rx_ant) {
+ IWL_ERR_DEV(dev, "invalid antennas (0x%x, 0x%x)\n",
+ data->valid_tx_ant, data->valid_rx_ant);
+ goto err_free;
+ }
+
+ iwl_init_sbands(dev, cfg, data, eeprom, eeprom_size);
+
+ return data;
+ err_free:
+ kfree(data);
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(iwl_parse_eeprom_data);
+
+/* helper functions */
+int iwl_eeprom_check_version(struct iwl_eeprom_data *data,
+ struct iwl_trans *trans)
+{
+ if (data->eeprom_version >= trans->cfg->eeprom_ver ||
+ data->calib_version >= trans->cfg->eeprom_calib_ver) {
+ IWL_INFO(trans, "device EEPROM VER=0x%x, CALIB=0x%x\n",
+ data->eeprom_version, data->calib_version);
+ return 0;
+ }
+
+ IWL_ERR(trans,
+ "Unsupported (too old) EEPROM VER=0x%x < 0x%x CALIB=0x%x < 0x%x\n",
+ data->eeprom_version, trans->cfg->eeprom_ver,
+ data->calib_version, trans->cfg->eeprom_calib_ver);
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(iwl_eeprom_check_version);
--- /dev/null
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+#ifndef __iwl_eeprom_parse_h__
+#define __iwl_eeprom_parse_h__
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+#include "iwl-trans.h"
+
+/* SKU Capabilities (actual values from EEPROM definition) */
+#define EEPROM_SKU_CAP_BAND_24GHZ (1 << 4)
+#define EEPROM_SKU_CAP_BAND_52GHZ (1 << 5)
+#define EEPROM_SKU_CAP_11N_ENABLE (1 << 6)
+#define EEPROM_SKU_CAP_AMT_ENABLE (1 << 7)
+#define EEPROM_SKU_CAP_IPAN_ENABLE (1 << 8)
+
+/* radio config bits (actual values from EEPROM definition) */
+#define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */
+#define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */
+#define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */
+#define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */
+#define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */
+#define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */
+
+struct iwl_eeprom_data {
+ int n_hw_addrs;
+ u8 hw_addr[ETH_ALEN];
+
+ u16 radio_config;
+
+ u8 calib_version;
+ __le16 calib_voltage;
+
+ __le16 raw_temperature;
+ __le16 kelvin_temperature;
+ __le16 kelvin_voltage;
+ __le16 xtal_calib[2];
+
+ u16 sku;
+ u16 radio_cfg;
+ u16 eeprom_version;
+ s8 max_tx_pwr_half_dbm;
+
+ u8 valid_tx_ant, valid_rx_ant;
+
+ struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
+ struct ieee80211_channel channels[];
+};
+
+/**
+ * iwl_parse_eeprom_data - parse EEPROM data and return values
+ *
+ * @dev: device pointer we're parsing for, for debug only
+ * @cfg: device configuration for parsing and overrides
+ * @eeprom: the EEPROM data
+ * @eeprom_size: length of the EEPROM data
+ *
+ * This function parses all EEPROM values we need and then
+ * returns a (newly allocated) struct containing all the
+ * relevant values for driver use. The struct must be freed
+ * later with iwl_free_eeprom_data().
+ */
+struct iwl_eeprom_data *
+iwl_parse_eeprom_data(struct device *dev, const struct iwl_cfg *cfg,
+ const u8 *eeprom, size_t eeprom_size);
+
+/**
+ * iwl_free_eeprom_data - free EEPROM data
+ * @data: the data to free
+ */
+static inline void iwl_free_eeprom_data(struct iwl_eeprom_data *data)
+{
+ kfree(data);
+}
+
+int iwl_eeprom_check_version(struct iwl_eeprom_data *data,
+ struct iwl_trans *trans);
+
+#endif /* __iwl_eeprom_parse_h__ */
--- /dev/null
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+
+#include "iwl-debug.h"
+#include "iwl-eeprom-read.h"
+#include "iwl-io.h"
+#include "iwl-prph.h"
+#include "iwl-csr.h"
+
+/*
+ * EEPROM access time values:
+ *
+ * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG.
+ * Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1).
+ * When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec.
+ * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG.
+ */
+#define IWL_EEPROM_ACCESS_TIMEOUT 5000 /* uSec */
+
+#define IWL_EEPROM_SEM_TIMEOUT 10 /* microseconds */
+#define IWL_EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
+
+
+/*
+ * The device's EEPROM semaphore prevents conflicts between driver and uCode
+ * when accessing the EEPROM; each access is a series of pulses to/from the
+ * EEPROM chip, not a single event, so even reads could conflict if they
+ * weren't arbitrated by the semaphore.
+ */
+
+#define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
+#define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
+
+static int iwl_eeprom_acquire_semaphore(struct iwl_trans *trans)
+{
+ u16 count;
+ int ret;
+
+ for (count = 0; count < EEPROM_SEM_RETRY_LIMIT; count++) {
+ /* Request semaphore */
+ iwl_set_bit(trans, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
+
+ /* See if we got it */
+ ret = iwl_poll_bit(trans, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
+ CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
+ EEPROM_SEM_TIMEOUT);
+ if (ret >= 0) {
+ IWL_DEBUG_EEPROM(trans->dev,
+ "Acquired semaphore after %d tries.\n",
+ count+1);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static void iwl_eeprom_release_semaphore(struct iwl_trans *trans)
+{
+ iwl_clear_bit(trans, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
+}
+
+static int iwl_eeprom_verify_signature(struct iwl_trans *trans, bool nvm_is_otp)
+{
+ u32 gp = iwl_read32(trans, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK;
+
+ IWL_DEBUG_EEPROM(trans->dev, "EEPROM signature=0x%08x\n", gp);
+
+ switch (gp) {
+ case CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP:
+ if (!nvm_is_otp) {
+ IWL_ERR(trans, "EEPROM with bad signature: 0x%08x\n",
+ gp);
+ return -ENOENT;
+ }
+ return 0;
+ case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K:
+ case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K:
+ if (nvm_is_otp) {
+ IWL_ERR(trans, "OTP with bad signature: 0x%08x\n", gp);
+ return -ENOENT;
+ }
+ return 0;
+ case CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP:
+ default:
+ IWL_ERR(trans,
+ "bad EEPROM/OTP signature, type=%s, EEPROM_GP=0x%08x\n",
+ nvm_is_otp ? "OTP" : "EEPROM", gp);
+ return -ENOENT;
+ }
+}
+
+/******************************************************************************
+ *
+ * OTP related functions
+ *
+******************************************************************************/
+
+static void iwl_set_otp_access_absolute(struct iwl_trans *trans)
+{
+ iwl_read32(trans, CSR_OTP_GP_REG);
+
+ iwl_clear_bit(trans, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_OTP_ACCESS_MODE);
+}
+
+static int iwl_nvm_is_otp(struct iwl_trans *trans)
+{
+ u32 otpgp;
+
+ /* OTP only valid for CP/PP and after */
+ switch (trans->hw_rev & CSR_HW_REV_TYPE_MSK) {
+ case CSR_HW_REV_TYPE_NONE:
+ IWL_ERR(trans, "Unknown hardware type\n");
+ return -EIO;
+ case CSR_HW_REV_TYPE_5300:
+ case CSR_HW_REV_TYPE_5350:
+ case CSR_HW_REV_TYPE_5100:
+ case CSR_HW_REV_TYPE_5150:
+ return 0;
+ default:
+ otpgp = iwl_read32(trans, CSR_OTP_GP_REG);
+ if (otpgp & CSR_OTP_GP_REG_DEVICE_SELECT)
+ return 1;
+ return 0;
+ }
+}
+
+static int iwl_init_otp_access(struct iwl_trans *trans)
+{
+ int ret;
+
+ /* Enable 40MHz radio clock */
+ iwl_write32(trans, CSR_GP_CNTRL,
+ iwl_read32(trans, CSR_GP_CNTRL) |
+ CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+
+ /* wait for clock to be ready */
+ ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+ 25000);
+ if (ret < 0) {
+ IWL_ERR(trans, "Time out access OTP\n");
+ } else {
+ iwl_set_bits_prph(trans, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_RESET_REQ);
+ udelay(5);
+ iwl_clear_bits_prph(trans, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_RESET_REQ);
+
+ /*
+ * CSR auto clock gate disable bit -
+ * this is only applicable for HW with OTP shadow RAM
+ */
+ if (trans->cfg->base_params->shadow_ram_support)
+ iwl_set_bit(trans, CSR_DBG_LINK_PWR_MGMT_REG,
+ CSR_RESET_LINK_PWR_MGMT_DISABLED);
+ }
+ return ret;
+}
+
+static int iwl_read_otp_word(struct iwl_trans *trans, u16 addr,
+ __le16 *eeprom_data)
+{
+ int ret = 0;
+ u32 r;
+ u32 otpgp;
+
+ iwl_write32(trans, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
+ ret = iwl_poll_bit(trans, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_READ_VALID_MSK,
+ CSR_EEPROM_REG_READ_VALID_MSK,
+ IWL_EEPROM_ACCESS_TIMEOUT);
+ if (ret < 0) {
+ IWL_ERR(trans, "Time out reading OTP[%d]\n", addr);
+ return ret;
+ }
+ r = iwl_read32(trans, CSR_EEPROM_REG);
+ /* check for ECC errors: */
+ otpgp = iwl_read32(trans, CSR_OTP_GP_REG);
+ if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) {
+ /* stop in this case */
+ /* set the uncorrectable OTP ECC bit for acknowledgement */
+ iwl_set_bit(trans, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
+ IWL_ERR(trans, "Uncorrectable OTP ECC error, abort OTP read\n");
+ return -EINVAL;
+ }
+ if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) {
+ /* continue in this case */
+ /* set the correctable OTP ECC bit for acknowledgement */
+ iwl_set_bit(trans, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK);
+ IWL_ERR(trans, "Correctable OTP ECC error, continue read\n");
+ }
+ *eeprom_data = cpu_to_le16(r >> 16);
+ return 0;
+}
+
+/*
+ * iwl_is_otp_empty: check for empty OTP
+ */
+static bool iwl_is_otp_empty(struct iwl_trans *trans)
+{
+ u16 next_link_addr = 0;
+ __le16 link_value;
+ bool is_empty = false;
+
+ /* locate the beginning of OTP link list */
+ if (!iwl_read_otp_word(trans, next_link_addr, &link_value)) {
+ if (!link_value) {
+ IWL_ERR(trans, "OTP is empty\n");
+ is_empty = true;
+ }
+ } else {
+ IWL_ERR(trans, "Unable to read first block of OTP list.\n");
+ is_empty = true;
+ }
+
+ return is_empty;
+}
+
+
+/*
+ * iwl_find_otp_image: find EEPROM image in OTP
+ * finding the OTP block that contains the EEPROM image.
+ * the last valid block on the link list (the block _before_ the last block)
+ * is the block we should read and used to configure the device.
+ * If all the available OTP blocks are full, the last block will be the block
+ * we should read and used to configure the device.
+ * only perform this operation if shadow RAM is disabled
+ */
+static int iwl_find_otp_image(struct iwl_trans *trans,
+ u16 *validblockaddr)
+{
+ u16 next_link_addr = 0, valid_addr;
+ __le16 link_value = 0;
+ int usedblocks = 0;
+
+ /* set addressing mode to absolute to traverse the link list */
+ iwl_set_otp_access_absolute(trans);
+
+ /* checking for empty OTP or error */
+ if (iwl_is_otp_empty(trans))
+ return -EINVAL;
+
+ /*
+ * start traverse link list
+ * until reach the max number of OTP blocks
+ * different devices have different number of OTP blocks
+ */
+ do {
+ /* save current valid block address
+ * check for more block on the link list
+ */
+ valid_addr = next_link_addr;
+ next_link_addr = le16_to_cpu(link_value) * sizeof(u16);
+ IWL_DEBUG_EEPROM(trans->dev, "OTP blocks %d addr 0x%x\n",
+ usedblocks, next_link_addr);
+ if (iwl_read_otp_word(trans, next_link_addr, &link_value))
+ return -EINVAL;
+ if (!link_value) {
+ /*
+ * reach the end of link list, return success and
+ * set address point to the starting address
+ * of the image
+ */
+ *validblockaddr = valid_addr;
+ /* skip first 2 bytes (link list pointer) */
+ *validblockaddr += 2;
+ return 0;
+ }
+ /* more in the link list, continue */
+ usedblocks++;
+ } while (usedblocks <= trans->cfg->base_params->max_ll_items);
+
+ /* OTP has no valid blocks */
+ IWL_DEBUG_EEPROM(trans->dev, "OTP has no valid blocks\n");
+ return -EINVAL;
+}
+
+/**
+ * iwl_read_eeprom - read EEPROM contents
+ *
+ * Load the EEPROM contents from adapter and return it
+ * and its size.
+ *
+ * NOTE: This routine uses the non-debug IO access functions.
+ */
+int iwl_read_eeprom(struct iwl_trans *trans, u8 **eeprom, size_t *eeprom_size)
+{
+ __le16 *e;
+ u32 gp = iwl_read32(trans, CSR_EEPROM_GP);
+ int sz;
+ int ret;
+ u16 addr;
+ u16 validblockaddr = 0;
+ u16 cache_addr = 0;
+ int nvm_is_otp;
+
+ if (!eeprom || !eeprom_size)
+ return -EINVAL;
+
+ nvm_is_otp = iwl_nvm_is_otp(trans);
+ if (nvm_is_otp < 0)
+ return nvm_is_otp;
+
+ sz = trans->cfg->base_params->eeprom_size;
+ IWL_DEBUG_EEPROM(trans->dev, "NVM size = %d\n", sz);
+
+ e = kmalloc(sz, GFP_KERNEL);
+ if (!e)
+ return -ENOMEM;
+
+ ret = iwl_eeprom_verify_signature(trans, nvm_is_otp);
+ if (ret < 0) {
+ IWL_ERR(trans, "EEPROM not found, EEPROM_GP=0x%08x\n", gp);
+ goto err_free;
+ }
+
+ /* Make sure driver (instead of uCode) is allowed to read EEPROM */
+ ret = iwl_eeprom_acquire_semaphore(trans);
+ if (ret < 0) {
+ IWL_ERR(trans, "Failed to acquire EEPROM semaphore.\n");
+ goto err_free;
+ }
+
+ if (nvm_is_otp) {
+ ret = iwl_init_otp_access(trans);
+ if (ret) {
+ IWL_ERR(trans, "Failed to initialize OTP access.\n");
+ goto err_unlock;
+ }
+
+ iwl_write32(trans, CSR_EEPROM_GP,
+ iwl_read32(trans, CSR_EEPROM_GP) &
+ ~CSR_EEPROM_GP_IF_OWNER_MSK);
+
+ iwl_set_bit(trans, CSR_OTP_GP_REG,
+ CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK |
+ CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
+ /* traversing the linked list if no shadow ram supported */
+ if (!trans->cfg->base_params->shadow_ram_support) {
+ ret = iwl_find_otp_image(trans, &validblockaddr);
+ if (ret)
+ goto err_unlock;
+ }
+ for (addr = validblockaddr; addr < validblockaddr + sz;
+ addr += sizeof(u16)) {
+ __le16 eeprom_data;
+
+ ret = iwl_read_otp_word(trans, addr, &eeprom_data);
+ if (ret)
+ goto err_unlock;
+ e[cache_addr / 2] = eeprom_data;
+ cache_addr += sizeof(u16);
+ }
+ } else {
+ /* eeprom is an array of 16bit values */
+ for (addr = 0; addr < sz; addr += sizeof(u16)) {
+ u32 r;
+
+ iwl_write32(trans, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
+
+ ret = iwl_poll_bit(trans, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_READ_VALID_MSK,
+ CSR_EEPROM_REG_READ_VALID_MSK,
+ IWL_EEPROM_ACCESS_TIMEOUT);
+ if (ret < 0) {
+ IWL_ERR(trans,
+ "Time out reading EEPROM[%d]\n", addr);
+ goto err_unlock;
+ }
+ r = iwl_read32(trans, CSR_EEPROM_REG);
+ e[addr / 2] = cpu_to_le16(r >> 16);
+ }
+ }
+
+ IWL_DEBUG_EEPROM(trans->dev, "NVM Type: %s\n",
+ nvm_is_otp ? "OTP" : "EEPROM");
+
+ iwl_eeprom_release_semaphore(trans);
+
+ *eeprom_size = sz;
+ *eeprom = (u8 *)e;
+ return 0;
+
+ err_unlock:
+ iwl_eeprom_release_semaphore(trans);
+ err_free:
+ kfree(e);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(iwl_read_eeprom);
--- /dev/null
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+
+#ifndef __iwl_eeprom_h__
+#define __iwl_eeprom_h__
+
+#include "iwl-trans.h"
+
+int iwl_read_eeprom(struct iwl_trans *trans, u8 **eeprom, size_t *eeprom_size);
+
+#endif /* __iwl_eeprom_h__ */
+++ /dev/null
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *****************************************************************************/
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-
-#include <net/mac80211.h>
-
-#include "iwl-dev.h"
-#include "iwl-debug.h"
-#include "iwl-agn.h"
-#include "iwl-eeprom.h"
-#include "iwl-io.h"
-#include "iwl-prph.h"
-
-/************************** EEPROM BANDS ****************************
- *
- * The iwl_eeprom_band definitions below provide the mapping from the
- * EEPROM contents to the specific channel number supported for each
- * band.
- *
- * For example, iwl_priv->eeprom.band_3_channels[4] from the band_3
- * definition below maps to physical channel 42 in the 5.2GHz spectrum.
- * The specific geography and calibration information for that channel
- * is contained in the eeprom map itself.
- *
- * During init, we copy the eeprom information and channel map
- * information into priv->channel_info_24/52 and priv->channel_map_24/52
- *
- * channel_map_24/52 provides the index in the channel_info array for a
- * given channel. We have to have two separate maps as there is channel
- * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
- * band_2
- *
- * A value of 0xff stored in the channel_map indicates that the channel
- * is not supported by the hardware at all.
- *
- * A value of 0xfe in the channel_map indicates that the channel is not
- * valid for Tx with the current hardware. This means that
- * while the system can tune and receive on a given channel, it may not
- * be able to associate or transmit any frames on that
- * channel. There is no corresponding channel information for that
- * entry.
- *
- *********************************************************************/
-
-/* 2.4 GHz */
-const u8 iwl_eeprom_band_1[14] = {
- 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
-};
-
-/* 5.2 GHz bands */
-static const u8 iwl_eeprom_band_2[] = { /* 4915-5080MHz */
- 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
-};
-
-static const u8 iwl_eeprom_band_3[] = { /* 5170-5320MHz */
- 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
-};
-
-static const u8 iwl_eeprom_band_4[] = { /* 5500-5700MHz */
- 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
-};
-
-static const u8 iwl_eeprom_band_5[] = { /* 5725-5825MHz */
- 145, 149, 153, 157, 161, 165
-};
-
-static const u8 iwl_eeprom_band_6[] = { /* 2.4 ht40 channel */
- 1, 2, 3, 4, 5, 6, 7
-};
-
-static const u8 iwl_eeprom_band_7[] = { /* 5.2 ht40 channel */
- 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157
-};
-
-/******************************************************************************
- *
- * generic NVM functions
- *
-******************************************************************************/
-
-/*
- * The device's EEPROM semaphore prevents conflicts between driver and uCode
- * when accessing the EEPROM; each access is a series of pulses to/from the
- * EEPROM chip, not a single event, so even reads could conflict if they
- * weren't arbitrated by the semaphore.
- */
-
-#define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
-#define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
-
-static int iwl_eeprom_acquire_semaphore(struct iwl_trans *trans)
-{
- u16 count;
- int ret;
-
- for (count = 0; count < EEPROM_SEM_RETRY_LIMIT; count++) {
- /* Request semaphore */
- iwl_set_bit(trans, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
-
- /* See if we got it */
- ret = iwl_poll_bit(trans, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
- CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
- EEPROM_SEM_TIMEOUT);
- if (ret >= 0) {
- IWL_DEBUG_EEPROM(trans,
- "Acquired semaphore after %d tries.\n",
- count+1);
- return ret;
- }
- }
-
- return ret;
-}
-
-static void iwl_eeprom_release_semaphore(struct iwl_trans *trans)
-{
- iwl_clear_bit(trans, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
-
-}
-
-static int iwl_eeprom_verify_signature(struct iwl_priv *priv)
-{
- u32 gp = iwl_read32(priv->trans, CSR_EEPROM_GP) &
- CSR_EEPROM_GP_VALID_MSK;
- int ret = 0;
-
- IWL_DEBUG_EEPROM(priv, "EEPROM signature=0x%08x\n", gp);
- switch (gp) {
- case CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP:
- if (priv->nvm_device_type != NVM_DEVICE_TYPE_OTP) {
- IWL_ERR(priv, "EEPROM with bad signature: 0x%08x\n",
- gp);
- ret = -ENOENT;
- }
- break;
- case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K:
- case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K:
- if (priv->nvm_device_type != NVM_DEVICE_TYPE_EEPROM) {
- IWL_ERR(priv, "OTP with bad signature: 0x%08x\n", gp);
- ret = -ENOENT;
- }
- break;
- case CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP:
- default:
- IWL_ERR(priv, "bad EEPROM/OTP signature, type=%s, "
- "EEPROM_GP=0x%08x\n",
- (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
- ? "OTP" : "EEPROM", gp);
- ret = -ENOENT;
- break;
- }
- return ret;
-}
-
-u16 iwl_eeprom_query16(struct iwl_priv *priv, size_t offset)
-{
- if (!priv->eeprom)
- return 0;
- return (u16)priv->eeprom[offset] | ((u16)priv->eeprom[offset + 1] << 8);
-}
-
-int iwl_eeprom_check_version(struct iwl_priv *priv)
-{
- u16 eeprom_ver;
- u16 calib_ver;
-
- eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
- calib_ver = iwl_eeprom_calib_version(priv);
-
- if (eeprom_ver < priv->cfg->eeprom_ver ||
- calib_ver < priv->cfg->eeprom_calib_ver)
- goto err;
-
- IWL_INFO(priv, "device EEPROM VER=0x%x, CALIB=0x%x\n",
- eeprom_ver, calib_ver);
-
- return 0;
-err:
- IWL_ERR(priv, "Unsupported (too old) EEPROM VER=0x%x < 0x%x "
- "CALIB=0x%x < 0x%x\n",
- eeprom_ver, priv->cfg->eeprom_ver,
- calib_ver, priv->cfg->eeprom_calib_ver);
- return -EINVAL;
-
-}
-
-int iwl_eeprom_init_hw_params(struct iwl_priv *priv)
-{
- u16 radio_cfg;
-
- priv->hw_params.sku = iwl_eeprom_query16(priv, EEPROM_SKU_CAP);
- if (priv->hw_params.sku & EEPROM_SKU_CAP_11N_ENABLE &&
- !priv->cfg->ht_params) {
- IWL_ERR(priv, "Invalid 11n configuration\n");
- return -EINVAL;
- }
-
- if (!priv->hw_params.sku) {
- IWL_ERR(priv, "Invalid device sku\n");
- return -EINVAL;
- }
-
- IWL_INFO(priv, "Device SKU: 0x%X\n", priv->hw_params.sku);
-
- radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
-
- priv->hw_params.valid_tx_ant = EEPROM_RF_CFG_TX_ANT_MSK(radio_cfg);
- priv->hw_params.valid_rx_ant = EEPROM_RF_CFG_RX_ANT_MSK(radio_cfg);
-
- /* check overrides (some devices have wrong EEPROM) */
- if (priv->cfg->valid_tx_ant)
- priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
- if (priv->cfg->valid_rx_ant)
- priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
-
- if (!priv->hw_params.valid_tx_ant || !priv->hw_params.valid_rx_ant) {
- IWL_ERR(priv, "Invalid chain (0x%X, 0x%X)\n",
- priv->hw_params.valid_tx_ant,
- priv->hw_params.valid_rx_ant);
- return -EINVAL;
- }
-
- IWL_INFO(priv, "Valid Tx ant: 0x%X, Valid Rx ant: 0x%X\n",
- priv->hw_params.valid_tx_ant, priv->hw_params.valid_rx_ant);
-
- return 0;
-}
-
-u16 iwl_eeprom_calib_version(struct iwl_priv *priv)
-{
- struct iwl_eeprom_calib_hdr *hdr;
-
- hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv,
- EEPROM_CALIB_ALL);
- return hdr->version;
-}
-
-static u32 eeprom_indirect_address(struct iwl_priv *priv, u32 address)
-{
- u16 offset = 0;
-
- if ((address & INDIRECT_ADDRESS) == 0)
- return address;
-
- switch (address & INDIRECT_TYPE_MSK) {
- case INDIRECT_HOST:
- offset = iwl_eeprom_query16(priv, EEPROM_LINK_HOST);
- break;
- case INDIRECT_GENERAL:
- offset = iwl_eeprom_query16(priv, EEPROM_LINK_GENERAL);
- break;
- case INDIRECT_REGULATORY:
- offset = iwl_eeprom_query16(priv, EEPROM_LINK_REGULATORY);
- break;
- case INDIRECT_TXP_LIMIT:
- offset = iwl_eeprom_query16(priv, EEPROM_LINK_TXP_LIMIT);
- break;
- case INDIRECT_TXP_LIMIT_SIZE:
- offset = iwl_eeprom_query16(priv, EEPROM_LINK_TXP_LIMIT_SIZE);
- break;
- case INDIRECT_CALIBRATION:
- offset = iwl_eeprom_query16(priv, EEPROM_LINK_CALIBRATION);
- break;
- case INDIRECT_PROCESS_ADJST:
- offset = iwl_eeprom_query16(priv, EEPROM_LINK_PROCESS_ADJST);
- break;
- case INDIRECT_OTHERS:
- offset = iwl_eeprom_query16(priv, EEPROM_LINK_OTHERS);
- break;
- default:
- IWL_ERR(priv, "illegal indirect type: 0x%X\n",
- address & INDIRECT_TYPE_MSK);
- break;
- }
-
- /* translate the offset from words to byte */
- return (address & ADDRESS_MSK) + (offset << 1);
-}
-
-const u8 *iwl_eeprom_query_addr(struct iwl_priv *priv, size_t offset)
-{
- u32 address = eeprom_indirect_address(priv, offset);
- BUG_ON(address >= priv->cfg->base_params->eeprom_size);
- return &priv->eeprom[address];
-}
-
-void iwl_eeprom_get_mac(struct iwl_priv *priv, u8 *mac)
-{
- const u8 *addr = iwl_eeprom_query_addr(priv,
- EEPROM_MAC_ADDRESS);
- memcpy(mac, addr, ETH_ALEN);
-}
-
-/******************************************************************************
- *
- * OTP related functions
- *
-******************************************************************************/
-
-static void iwl_set_otp_access(struct iwl_trans *trans,
- enum iwl_access_mode mode)
-{
- iwl_read32(trans, CSR_OTP_GP_REG);
-
- if (mode == IWL_OTP_ACCESS_ABSOLUTE)
- iwl_clear_bit(trans, CSR_OTP_GP_REG,
- CSR_OTP_GP_REG_OTP_ACCESS_MODE);
- else
- iwl_set_bit(trans, CSR_OTP_GP_REG,
- CSR_OTP_GP_REG_OTP_ACCESS_MODE);
-}
-
-static int iwl_get_nvm_type(struct iwl_trans *trans, u32 hw_rev)
-{
- u32 otpgp;
- int nvm_type;
-
- /* OTP only valid for CP/PP and after */
- switch (hw_rev & CSR_HW_REV_TYPE_MSK) {
- case CSR_HW_REV_TYPE_NONE:
- IWL_ERR(trans, "Unknown hardware type\n");
- return -ENOENT;
- case CSR_HW_REV_TYPE_5300:
- case CSR_HW_REV_TYPE_5350:
- case CSR_HW_REV_TYPE_5100:
- case CSR_HW_REV_TYPE_5150:
- nvm_type = NVM_DEVICE_TYPE_EEPROM;
- break;
- default:
- otpgp = iwl_read32(trans, CSR_OTP_GP_REG);
- if (otpgp & CSR_OTP_GP_REG_DEVICE_SELECT)
- nvm_type = NVM_DEVICE_TYPE_OTP;
- else
- nvm_type = NVM_DEVICE_TYPE_EEPROM;
- break;
- }
- return nvm_type;
-}
-
-static int iwl_init_otp_access(struct iwl_trans *trans)
-{
- int ret;
-
- /* Enable 40MHz radio clock */
- iwl_write32(trans, CSR_GP_CNTRL,
- iwl_read32(trans, CSR_GP_CNTRL) |
- CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
- /* wait for clock to be ready */
- ret = iwl_poll_bit(trans, CSR_GP_CNTRL,
- CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
- CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
- 25000);
- if (ret < 0)
- IWL_ERR(trans, "Time out access OTP\n");
- else {
- iwl_set_bits_prph(trans, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_RESET_REQ);
- udelay(5);
- iwl_clear_bits_prph(trans, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_RESET_REQ);
-
- /*
- * CSR auto clock gate disable bit -
- * this is only applicable for HW with OTP shadow RAM
- */
- if (trans->cfg->base_params->shadow_ram_support)
- iwl_set_bit(trans, CSR_DBG_LINK_PWR_MGMT_REG,
- CSR_RESET_LINK_PWR_MGMT_DISABLED);
- }
- return ret;
-}
-
-static int iwl_read_otp_word(struct iwl_trans *trans, u16 addr,
- __le16 *eeprom_data)
-{
- int ret = 0;
- u32 r;
- u32 otpgp;
-
- iwl_write32(trans, CSR_EEPROM_REG,
- CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
- ret = iwl_poll_bit(trans, CSR_EEPROM_REG,
- CSR_EEPROM_REG_READ_VALID_MSK,
- CSR_EEPROM_REG_READ_VALID_MSK,
- IWL_EEPROM_ACCESS_TIMEOUT);
- if (ret < 0) {
- IWL_ERR(trans, "Time out reading OTP[%d]\n", addr);
- return ret;
- }
- r = iwl_read32(trans, CSR_EEPROM_REG);
- /* check for ECC errors: */
- otpgp = iwl_read32(trans, CSR_OTP_GP_REG);
- if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) {
- /* stop in this case */
- /* set the uncorrectable OTP ECC bit for acknowledgement */
- iwl_set_bit(trans, CSR_OTP_GP_REG,
- CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
- IWL_ERR(trans, "Uncorrectable OTP ECC error, abort OTP read\n");
- return -EINVAL;
- }
- if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) {
- /* continue in this case */
- /* set the correctable OTP ECC bit for acknowledgement */
- iwl_set_bit(trans, CSR_OTP_GP_REG,
- CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK);
- IWL_ERR(trans, "Correctable OTP ECC error, continue read\n");
- }
- *eeprom_data = cpu_to_le16(r >> 16);
- return 0;
-}
-
-/*
- * iwl_is_otp_empty: check for empty OTP
- */
-static bool iwl_is_otp_empty(struct iwl_trans *trans)
-{
- u16 next_link_addr = 0;
- __le16 link_value;
- bool is_empty = false;
-
- /* locate the beginning of OTP link list */
- if (!iwl_read_otp_word(trans, next_link_addr, &link_value)) {
- if (!link_value) {
- IWL_ERR(trans, "OTP is empty\n");
- is_empty = true;
- }
- } else {
- IWL_ERR(trans, "Unable to read first block of OTP list.\n");
- is_empty = true;
- }
-
- return is_empty;
-}
-
-
-/*
- * iwl_find_otp_image: find EEPROM image in OTP
- * finding the OTP block that contains the EEPROM image.
- * the last valid block on the link list (the block _before_ the last block)
- * is the block we should read and used to configure the device.
- * If all the available OTP blocks are full, the last block will be the block
- * we should read and used to configure the device.
- * only perform this operation if shadow RAM is disabled
- */
-static int iwl_find_otp_image(struct iwl_trans *trans,
- u16 *validblockaddr)
-{
- u16 next_link_addr = 0, valid_addr;
- __le16 link_value = 0;
- int usedblocks = 0;
-
- /* set addressing mode to absolute to traverse the link list */
- iwl_set_otp_access(trans, IWL_OTP_ACCESS_ABSOLUTE);
-
- /* checking for empty OTP or error */
- if (iwl_is_otp_empty(trans))
- return -EINVAL;
-
- /*
- * start traverse link list
- * until reach the max number of OTP blocks
- * different devices have different number of OTP blocks
- */
- do {
- /* save current valid block address
- * check for more block on the link list
- */
- valid_addr = next_link_addr;
- next_link_addr = le16_to_cpu(link_value) * sizeof(u16);
- IWL_DEBUG_EEPROM(trans, "OTP blocks %d addr 0x%x\n",
- usedblocks, next_link_addr);
- if (iwl_read_otp_word(trans, next_link_addr, &link_value))
- return -EINVAL;
- if (!link_value) {
- /*
- * reach the end of link list, return success and
- * set address point to the starting address
- * of the image
- */
- *validblockaddr = valid_addr;
- /* skip first 2 bytes (link list pointer) */
- *validblockaddr += 2;
- return 0;
- }
- /* more in the link list, continue */
- usedblocks++;
- } while (usedblocks <= trans->cfg->base_params->max_ll_items);
-
- /* OTP has no valid blocks */
- IWL_DEBUG_EEPROM(trans, "OTP has no valid blocks\n");
- return -EINVAL;
-}
-
-/******************************************************************************
- *
- * Tx Power related functions
- *
-******************************************************************************/
-/**
- * iwl_get_max_txpower_avg - get the highest tx power from all chains.
- * find the highest tx power from all chains for the channel
- */
-static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
- struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
- int element, s8 *max_txpower_in_half_dbm)
-{
- s8 max_txpower_avg = 0; /* (dBm) */
-
- /* Take the highest tx power from any valid chains */
- if ((priv->hw_params.valid_tx_ant & ANT_A) &&
- (enhanced_txpower[element].chain_a_max > max_txpower_avg))
- max_txpower_avg = enhanced_txpower[element].chain_a_max;
- if ((priv->hw_params.valid_tx_ant & ANT_B) &&
- (enhanced_txpower[element].chain_b_max > max_txpower_avg))
- max_txpower_avg = enhanced_txpower[element].chain_b_max;
- if ((priv->hw_params.valid_tx_ant & ANT_C) &&
- (enhanced_txpower[element].chain_c_max > max_txpower_avg))
- max_txpower_avg = enhanced_txpower[element].chain_c_max;
- if (((priv->hw_params.valid_tx_ant == ANT_AB) |
- (priv->hw_params.valid_tx_ant == ANT_BC) |
- (priv->hw_params.valid_tx_ant == ANT_AC)) &&
- (enhanced_txpower[element].mimo2_max > max_txpower_avg))
- max_txpower_avg = enhanced_txpower[element].mimo2_max;
- if ((priv->hw_params.valid_tx_ant == ANT_ABC) &&
- (enhanced_txpower[element].mimo3_max > max_txpower_avg))
- max_txpower_avg = enhanced_txpower[element].mimo3_max;
-
- /*
- * max. tx power in EEPROM is in 1/2 dBm format
- * convert from 1/2 dBm to dBm (round-up convert)
- * but we also do not want to loss 1/2 dBm resolution which
- * will impact performance
- */
- *max_txpower_in_half_dbm = max_txpower_avg;
- return (max_txpower_avg & 0x01) + (max_txpower_avg >> 1);
-}
-
-static void
-iwl_eeprom_enh_txp_read_element(struct iwl_priv *priv,
- struct iwl_eeprom_enhanced_txpwr *txp,
- s8 max_txpower_avg)
-{
- int ch_idx;
- bool is_ht40 = txp->flags & IWL_EEPROM_ENH_TXP_FL_40MHZ;
- enum ieee80211_band band;
-
- band = txp->flags & IWL_EEPROM_ENH_TXP_FL_BAND_52G ?
- IEEE80211_BAND_5GHZ : IEEE80211_BAND_2GHZ;
-
- for (ch_idx = 0; ch_idx < priv->channel_count; ch_idx++) {
- struct iwl_channel_info *ch_info = &priv->channel_info[ch_idx];
-
- /* update matching channel or from common data only */
- if (txp->channel != 0 && ch_info->channel != txp->channel)
- continue;
-
- /* update matching band only */
- if (band != ch_info->band)
- continue;
-
- if (ch_info->max_power_avg < max_txpower_avg && !is_ht40) {
- ch_info->max_power_avg = max_txpower_avg;
- ch_info->curr_txpow = max_txpower_avg;
- ch_info->scan_power = max_txpower_avg;
- }
-
- if (is_ht40 && ch_info->ht40_max_power_avg < max_txpower_avg)
- ch_info->ht40_max_power_avg = max_txpower_avg;
- }
-}
-
-#define EEPROM_TXP_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT)
-#define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr)
-#define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE)
-
-#define TXP_CHECK_AND_PRINT(x) ((txp->flags & IWL_EEPROM_ENH_TXP_FL_##x) \
- ? # x " " : "")
-
-static void iwl_eeprom_enhanced_txpower(struct iwl_priv *priv)
-{
- struct iwl_eeprom_enhanced_txpwr *txp_array, *txp;
- int idx, entries;
- __le16 *txp_len;
- s8 max_txp_avg, max_txp_avg_halfdbm;
-
- BUILD_BUG_ON(sizeof(struct iwl_eeprom_enhanced_txpwr) != 8);
-
- /* the length is in 16-bit words, but we want entries */
- txp_len = (__le16 *) iwl_eeprom_query_addr(priv, EEPROM_TXP_SZ_OFFS);
- entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN;
-
- txp_array = (void *) iwl_eeprom_query_addr(priv, EEPROM_TXP_OFFS);
-
- for (idx = 0; idx < entries; idx++) {
- txp = &txp_array[idx];
- /* skip invalid entries */
- if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID))
- continue;
-
- IWL_DEBUG_EEPROM(priv, "%s %d:\t %s%s%s%s%s%s%s%s (0x%02x)\n",
- (txp->channel && (txp->flags &
- IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE)) ?
- "Common " : (txp->channel) ?
- "Channel" : "Common",
- (txp->channel),
- TXP_CHECK_AND_PRINT(VALID),
- TXP_CHECK_AND_PRINT(BAND_52G),
- TXP_CHECK_AND_PRINT(OFDM),
- TXP_CHECK_AND_PRINT(40MHZ),
- TXP_CHECK_AND_PRINT(HT_AP),
- TXP_CHECK_AND_PRINT(RES1),
- TXP_CHECK_AND_PRINT(RES2),
- TXP_CHECK_AND_PRINT(COMMON_TYPE),
- txp->flags);
- IWL_DEBUG_EEPROM(priv, "\t\t chain_A: 0x%02x "
- "chain_B: 0X%02x chain_C: 0X%02x\n",
- txp->chain_a_max, txp->chain_b_max,
- txp->chain_c_max);
- IWL_DEBUG_EEPROM(priv, "\t\t MIMO2: 0x%02x "
- "MIMO3: 0x%02x High 20_on_40: 0x%02x "
- "Low 20_on_40: 0x%02x\n",
- txp->mimo2_max, txp->mimo3_max,
- ((txp->delta_20_in_40 & 0xf0) >> 4),
- (txp->delta_20_in_40 & 0x0f));
-
- max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx,
- &max_txp_avg_halfdbm);
-
- /*
- * Update the user limit values values to the highest
- * power supported by any channel
- */
- if (max_txp_avg > priv->tx_power_user_lmt)
- priv->tx_power_user_lmt = max_txp_avg;
- if (max_txp_avg_halfdbm > priv->tx_power_lmt_in_half_dbm)
- priv->tx_power_lmt_in_half_dbm = max_txp_avg_halfdbm;
-
- iwl_eeprom_enh_txp_read_element(priv, txp, max_txp_avg);
- }
-}
-
-/**
- * iwl_eeprom_init - read EEPROM contents
- *
- * Load the EEPROM contents from adapter into priv->eeprom
- *
- * NOTE: This routine uses the non-debug IO access functions.
- */
-int iwl_eeprom_init(struct iwl_priv *priv, u32 hw_rev)
-{
- __le16 *e;
- u32 gp = iwl_read32(priv->trans, CSR_EEPROM_GP);
- int sz;
- int ret;
- u16 addr;
- u16 validblockaddr = 0;
- u16 cache_addr = 0;
-
- priv->nvm_device_type = iwl_get_nvm_type(priv->trans, hw_rev);
- if (priv->nvm_device_type == -ENOENT)
- return -ENOENT;
- /* allocate eeprom */
- sz = priv->cfg->base_params->eeprom_size;
- IWL_DEBUG_EEPROM(priv, "NVM size = %d\n", sz);
- priv->eeprom = kzalloc(sz, GFP_KERNEL);
- if (!priv->eeprom) {
- ret = -ENOMEM;
- goto alloc_err;
- }
- e = (__le16 *)priv->eeprom;
-
- ret = iwl_eeprom_verify_signature(priv);
- if (ret < 0) {
- IWL_ERR(priv, "EEPROM not found, EEPROM_GP=0x%08x\n", gp);
- ret = -ENOENT;
- goto err;
- }
-
- /* Make sure driver (instead of uCode) is allowed to read EEPROM */
- ret = iwl_eeprom_acquire_semaphore(priv->trans);
- if (ret < 0) {
- IWL_ERR(priv, "Failed to acquire EEPROM semaphore.\n");
- ret = -ENOENT;
- goto err;
- }
-
- if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP) {
-
- ret = iwl_init_otp_access(priv->trans);
- if (ret) {
- IWL_ERR(priv, "Failed to initialize OTP access.\n");
- ret = -ENOENT;
- goto done;
- }
- iwl_write32(priv->trans, CSR_EEPROM_GP,
- iwl_read32(priv->trans, CSR_EEPROM_GP) &
- ~CSR_EEPROM_GP_IF_OWNER_MSK);
-
- iwl_set_bit(priv->trans, CSR_OTP_GP_REG,
- CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK |
- CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
- /* traversing the linked list if no shadow ram supported */
- if (!priv->cfg->base_params->shadow_ram_support) {
- if (iwl_find_otp_image(priv->trans, &validblockaddr)) {
- ret = -ENOENT;
- goto done;
- }
- }
- for (addr = validblockaddr; addr < validblockaddr + sz;
- addr += sizeof(u16)) {
- __le16 eeprom_data;
-
- ret = iwl_read_otp_word(priv->trans, addr,
- &eeprom_data);
- if (ret)
- goto done;
- e[cache_addr / 2] = eeprom_data;
- cache_addr += sizeof(u16);
- }
- } else {
- /* eeprom is an array of 16bit values */
- for (addr = 0; addr < sz; addr += sizeof(u16)) {
- u32 r;
-
- iwl_write32(priv->trans, CSR_EEPROM_REG,
- CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
-
- ret = iwl_poll_bit(priv->trans, CSR_EEPROM_REG,
- CSR_EEPROM_REG_READ_VALID_MSK,
- CSR_EEPROM_REG_READ_VALID_MSK,
- IWL_EEPROM_ACCESS_TIMEOUT);
- if (ret < 0) {
- IWL_ERR(priv,
- "Time out reading EEPROM[%d]\n", addr);
- goto done;
- }
- r = iwl_read32(priv->trans, CSR_EEPROM_REG);
- e[addr / 2] = cpu_to_le16(r >> 16);
- }
- }
-
- IWL_DEBUG_EEPROM(priv, "NVM Type: %s, version: 0x%x\n",
- (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
- ? "OTP" : "EEPROM",
- iwl_eeprom_query16(priv, EEPROM_VERSION));
-
- ret = 0;
-done:
- iwl_eeprom_release_semaphore(priv->trans);
-
-err:
- if (ret)
- iwl_eeprom_free(priv);
-alloc_err:
- return ret;
-}
-
-void iwl_eeprom_free(struct iwl_priv *priv)
-{
- kfree(priv->eeprom);
- priv->eeprom = NULL;
-}
-
-static void iwl_init_band_reference(struct iwl_priv *priv,
- int eep_band, int *eeprom_ch_count,
- const struct iwl_eeprom_channel **eeprom_ch_info,
- const u8 **eeprom_ch_index)
-{
- u32 offset = priv->lib->
- eeprom_ops.regulatory_bands[eep_band - 1];
- switch (eep_band) {
- case 1: /* 2.4GHz band */
- *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_1);
- *eeprom_ch_info = (struct iwl_eeprom_channel *)
- iwl_eeprom_query_addr(priv, offset);
- *eeprom_ch_index = iwl_eeprom_band_1;
- break;
- case 2: /* 4.9GHz band */
- *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_2);
- *eeprom_ch_info = (struct iwl_eeprom_channel *)
- iwl_eeprom_query_addr(priv, offset);
- *eeprom_ch_index = iwl_eeprom_band_2;
- break;
- case 3: /* 5.2GHz band */
- *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_3);
- *eeprom_ch_info = (struct iwl_eeprom_channel *)
- iwl_eeprom_query_addr(priv, offset);
- *eeprom_ch_index = iwl_eeprom_band_3;
- break;
- case 4: /* 5.5GHz band */
- *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_4);
- *eeprom_ch_info = (struct iwl_eeprom_channel *)
- iwl_eeprom_query_addr(priv, offset);
- *eeprom_ch_index = iwl_eeprom_band_4;
- break;
- case 5: /* 5.7GHz band */
- *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_5);
- *eeprom_ch_info = (struct iwl_eeprom_channel *)
- iwl_eeprom_query_addr(priv, offset);
- *eeprom_ch_index = iwl_eeprom_band_5;
- break;
- case 6: /* 2.4GHz ht40 channels */
- *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6);
- *eeprom_ch_info = (struct iwl_eeprom_channel *)
- iwl_eeprom_query_addr(priv, offset);
- *eeprom_ch_index = iwl_eeprom_band_6;
- break;
- case 7: /* 5 GHz ht40 channels */
- *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7);
- *eeprom_ch_info = (struct iwl_eeprom_channel *)
- iwl_eeprom_query_addr(priv, offset);
- *eeprom_ch_index = iwl_eeprom_band_7;
- break;
- default:
- BUG();
- return;
- }
-}
-
-#define CHECK_AND_PRINT(x) ((eeprom_ch->flags & EEPROM_CHANNEL_##x) \
- ? # x " " : "")
-/**
- * iwl_mod_ht40_chan_info - Copy ht40 channel info into driver's priv.
- *
- * Does not set up a command, or touch hardware.
- */
-static int iwl_mod_ht40_chan_info(struct iwl_priv *priv,
- enum ieee80211_band band, u16 channel,
- const struct iwl_eeprom_channel *eeprom_ch,
- u8 clear_ht40_extension_channel)
-{
- struct iwl_channel_info *ch_info;
-
- ch_info = (struct iwl_channel_info *)
- iwl_get_channel_info(priv, band, channel);
-
- if (!is_channel_valid(ch_info))
- return -1;
-
- IWL_DEBUG_EEPROM(priv, "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
- " Ad-Hoc %ssupported\n",
- ch_info->channel,
- is_channel_a_band(ch_info) ?
- "5.2" : "2.4",
- CHECK_AND_PRINT(IBSS),
- CHECK_AND_PRINT(ACTIVE),
- CHECK_AND_PRINT(RADAR),
- CHECK_AND_PRINT(WIDE),
- CHECK_AND_PRINT(DFS),
- eeprom_ch->flags,
- eeprom_ch->max_power_avg,
- ((eeprom_ch->flags & EEPROM_CHANNEL_IBSS)
- && !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ?
- "" : "not ");
-
- ch_info->ht40_eeprom = *eeprom_ch;
- ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg;
- ch_info->ht40_flags = eeprom_ch->flags;
- if (eeprom_ch->flags & EEPROM_CHANNEL_VALID)
- ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel;
-
- return 0;
-}
-
-#define CHECK_AND_PRINT_I(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
- ? # x " " : "")
-
-/**
- * iwl_init_channel_map - Set up driver's info for all possible channels
- */
-int iwl_init_channel_map(struct iwl_priv *priv)
-{
- int eeprom_ch_count = 0;
- const u8 *eeprom_ch_index = NULL;
- const struct iwl_eeprom_channel *eeprom_ch_info = NULL;
- int band, ch;
- struct iwl_channel_info *ch_info;
-
- if (priv->channel_count) {
- IWL_DEBUG_EEPROM(priv, "Channel map already initialized.\n");
- return 0;
- }
-
- IWL_DEBUG_EEPROM(priv, "Initializing regulatory info from EEPROM\n");
-
- priv->channel_count =
- ARRAY_SIZE(iwl_eeprom_band_1) +
- ARRAY_SIZE(iwl_eeprom_band_2) +
- ARRAY_SIZE(iwl_eeprom_band_3) +
- ARRAY_SIZE(iwl_eeprom_band_4) +
- ARRAY_SIZE(iwl_eeprom_band_5);
-
- IWL_DEBUG_EEPROM(priv, "Parsing data for %d channels.\n",
- priv->channel_count);
-
- priv->channel_info = kcalloc(priv->channel_count,
- sizeof(struct iwl_channel_info),
- GFP_KERNEL);
- if (!priv->channel_info) {
- IWL_ERR(priv, "Could not allocate channel_info\n");
- priv->channel_count = 0;
- return -ENOMEM;
- }
-
- ch_info = priv->channel_info;
-
- /* Loop through the 5 EEPROM bands adding them in order to the
- * channel map we maintain (that contains additional information than
- * what just in the EEPROM) */
- for (band = 1; band <= 5; band++) {
-
- iwl_init_band_reference(priv, band, &eeprom_ch_count,
- &eeprom_ch_info, &eeprom_ch_index);
-
- /* Loop through each band adding each of the channels */
- for (ch = 0; ch < eeprom_ch_count; ch++) {
- ch_info->channel = eeprom_ch_index[ch];
- ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ :
- IEEE80211_BAND_5GHZ;
-
- /* permanently store EEPROM's channel regulatory flags
- * and max power in channel info database. */
- ch_info->eeprom = eeprom_ch_info[ch];
-
- /* Copy the run-time flags so they are there even on
- * invalid channels */
- ch_info->flags = eeprom_ch_info[ch].flags;
- /* First write that ht40 is not enabled, and then enable
- * one by one */
- ch_info->ht40_extension_channel =
- IEEE80211_CHAN_NO_HT40;
-
- if (!(is_channel_valid(ch_info))) {
- IWL_DEBUG_EEPROM(priv,
- "Ch. %d Flags %x [%sGHz] - "
- "No traffic\n",
- ch_info->channel,
- ch_info->flags,
- is_channel_a_band(ch_info) ?
- "5.2" : "2.4");
- ch_info++;
- continue;
- }
-
- /* Initialize regulatory-based run-time data */
- ch_info->max_power_avg = ch_info->curr_txpow =
- eeprom_ch_info[ch].max_power_avg;
- ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
- ch_info->min_power = 0;
-
- IWL_DEBUG_EEPROM(priv, "Ch. %d [%sGHz] "
- "%s%s%s%s%s%s(0x%02x %ddBm):"
- " Ad-Hoc %ssupported\n",
- ch_info->channel,
- is_channel_a_band(ch_info) ?
- "5.2" : "2.4",
- CHECK_AND_PRINT_I(VALID),
- CHECK_AND_PRINT_I(IBSS),
- CHECK_AND_PRINT_I(ACTIVE),
- CHECK_AND_PRINT_I(RADAR),
- CHECK_AND_PRINT_I(WIDE),
- CHECK_AND_PRINT_I(DFS),
- eeprom_ch_info[ch].flags,
- eeprom_ch_info[ch].max_power_avg,
- ((eeprom_ch_info[ch].
- flags & EEPROM_CHANNEL_IBSS)
- && !(eeprom_ch_info[ch].
- flags & EEPROM_CHANNEL_RADAR))
- ? "" : "not ");
-
- ch_info++;
- }
- }
-
- /* Check if we do have HT40 channels */
- if (priv->lib->eeprom_ops.regulatory_bands[5] ==
- EEPROM_REGULATORY_BAND_NO_HT40 &&
- priv->lib->eeprom_ops.regulatory_bands[6] ==
- EEPROM_REGULATORY_BAND_NO_HT40)
- return 0;
-
- /* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */
- for (band = 6; band <= 7; band++) {
- enum ieee80211_band ieeeband;
-
- iwl_init_band_reference(priv, band, &eeprom_ch_count,
- &eeprom_ch_info, &eeprom_ch_index);
-
- /* EEPROM band 6 is 2.4, band 7 is 5 GHz */
- ieeeband =
- (band == 6) ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
-
- /* Loop through each band adding each of the channels */
- for (ch = 0; ch < eeprom_ch_count; ch++) {
- /* Set up driver's info for lower half */
- iwl_mod_ht40_chan_info(priv, ieeeband,
- eeprom_ch_index[ch],
- &eeprom_ch_info[ch],
- IEEE80211_CHAN_NO_HT40PLUS);
-
- /* Set up driver's info for upper half */
- iwl_mod_ht40_chan_info(priv, ieeeband,
- eeprom_ch_index[ch] + 4,
- &eeprom_ch_info[ch],
- IEEE80211_CHAN_NO_HT40MINUS);
- }
- }
-
- /* for newer device (6000 series and up)
- * EEPROM contain enhanced tx power information
- * driver need to process addition information
- * to determine the max channel tx power limits
- */
- if (priv->lib->eeprom_ops.enhanced_txpower)
- iwl_eeprom_enhanced_txpower(priv);
-
- return 0;
-}
-
-/*
- * iwl_free_channel_map - undo allocations in iwl_init_channel_map
- */
-void iwl_free_channel_map(struct iwl_priv *priv)
-{
- kfree(priv->channel_info);
- priv->channel_count = 0;
-}
-
-/**
- * iwl_get_channel_info - Find driver's private channel info
- *
- * Based on band and channel number.
- */
-const struct iwl_channel_info *iwl_get_channel_info(const struct iwl_priv *priv,
- enum ieee80211_band band, u16 channel)
-{
- int i;
-
- switch (band) {
- case IEEE80211_BAND_5GHZ:
- for (i = 14; i < priv->channel_count; i++) {
- if (priv->channel_info[i].channel == channel)
- return &priv->channel_info[i];
- }
- break;
- case IEEE80211_BAND_2GHZ:
- if (channel >= 1 && channel <= 14)
- return &priv->channel_info[channel - 1];
- break;
- default:
- BUG();
- }
-
- return NULL;
-}
-
-void iwl_rf_config(struct iwl_priv *priv)
-{
- u16 radio_cfg;
-
- radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
-
- /* write radio config values to register */
- if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX) {
- iwl_set_bit(priv->trans, CSR_HW_IF_CONFIG_REG,
- EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
- EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
- EEPROM_RF_CFG_DASH_MSK(radio_cfg));
- IWL_INFO(priv, "Radio type=0x%x-0x%x-0x%x\n",
- EEPROM_RF_CFG_TYPE_MSK(radio_cfg),
- EEPROM_RF_CFG_STEP_MSK(radio_cfg),
- EEPROM_RF_CFG_DASH_MSK(radio_cfg));
- } else
- WARN_ON(1);
-
- /* set CSR_HW_CONFIG_REG for uCode use */
- iwl_set_bit(priv->trans, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
- CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
-}
+++ /dev/null
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *****************************************************************************/
-
-#ifndef __iwl_eeprom_h__
-#define __iwl_eeprom_h__
-
-#include <net/mac80211.h>
-
-struct iwl_priv;
-
-/*
- * EEPROM access time values:
- *
- * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG.
- * Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1).
- * When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec.
- * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG.
- */
-#define IWL_EEPROM_ACCESS_TIMEOUT 5000 /* uSec */
-
-#define IWL_EEPROM_SEM_TIMEOUT 10 /* microseconds */
-#define IWL_EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
-
-
-/*
- * Regulatory channel usage flags in EEPROM struct iwl4965_eeprom_channel.flags.
- *
- * IBSS and/or AP operation is allowed *only* on those channels with
- * (VALID && IBSS && ACTIVE && !RADAR). This restriction is in place because
- * RADAR detection is not supported by the 4965 driver, but is a
- * requirement for establishing a new network for legal operation on channels
- * requiring RADAR detection or restricting ACTIVE scanning.
- *
- * NOTE: "WIDE" flag does not indicate anything about "HT40" 40 MHz channels.
- * It only indicates that 20 MHz channel use is supported; HT40 channel
- * usage is indicated by a separate set of regulatory flags for each
- * HT40 channel pair.
- *
- * NOTE: Using a channel inappropriately will result in a uCode error!
- */
-#define IWL_NUM_TX_CALIB_GROUPS 5
-enum {
- EEPROM_CHANNEL_VALID = (1 << 0), /* usable for this SKU/geo */
- EEPROM_CHANNEL_IBSS = (1 << 1), /* usable as an IBSS channel */
- /* Bit 2 Reserved */
- EEPROM_CHANNEL_ACTIVE = (1 << 3), /* active scanning allowed */
- EEPROM_CHANNEL_RADAR = (1 << 4), /* radar detection required */
- EEPROM_CHANNEL_WIDE = (1 << 5), /* 20 MHz channel okay */
- /* Bit 6 Reserved (was Narrow Channel) */
- EEPROM_CHANNEL_DFS = (1 << 7), /* dynamic freq selection candidate */
-};
-
-/* SKU Capabilities */
-#define EEPROM_SKU_CAP_BAND_24GHZ (1 << 4)
-#define EEPROM_SKU_CAP_BAND_52GHZ (1 << 5)
-#define EEPROM_SKU_CAP_11N_ENABLE (1 << 6)
-#define EEPROM_SKU_CAP_AMT_ENABLE (1 << 7)
-#define EEPROM_SKU_CAP_IPAN_ENABLE (1 << 8)
-
-/* *regulatory* channel data format in eeprom, one for each channel.
- * There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */
-struct iwl_eeprom_channel {
- u8 flags; /* EEPROM_CHANNEL_* flags copied from EEPROM */
- s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */
-} __packed;
-
-enum iwl_eeprom_enhanced_txpwr_flags {
- IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0),
- IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1),
- IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2),
- IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3),
- IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4),
- IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5),
- IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6),
- IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7),
-};
-
-/**
- * iwl_eeprom_enhanced_txpwr structure
- * This structure presents the enhanced regulatory tx power limit layout
- * in eeprom image
- * Enhanced regulatory tx power portion of eeprom image can be broken down
- * into individual structures; each one is 8 bytes in size and contain the
- * following information
- * @flags: entry flags
- * @channel: channel number
- * @chain_a_max_pwr: chain a max power in 1/2 dBm
- * @chain_b_max_pwr: chain b max power in 1/2 dBm
- * @chain_c_max_pwr: chain c max power in 1/2 dBm
- * @delta_20_in_40: 20-in-40 deltas (hi/lo)
- * @mimo2_max_pwr: mimo2 max power in 1/2 dBm
- * @mimo3_max_pwr: mimo3 max power in 1/2 dBm
- *
- */
-struct iwl_eeprom_enhanced_txpwr {
- u8 flags;
- u8 channel;
- s8 chain_a_max;
- s8 chain_b_max;
- s8 chain_c_max;
- u8 delta_20_in_40;
- s8 mimo2_max;
- s8 mimo3_max;
-} __packed;
-
-/* calibration */
-struct iwl_eeprom_calib_hdr {
- u8 version;
- u8 pa_type;
- __le16 voltage;
-} __packed;
-
-#define EEPROM_CALIB_ALL (INDIRECT_ADDRESS | INDIRECT_CALIBRATION)
-#define EEPROM_XTAL ((2*0x128) | EEPROM_CALIB_ALL)
-
-/* temperature */
-#define EEPROM_KELVIN_TEMPERATURE ((2*0x12A) | EEPROM_CALIB_ALL)
-#define EEPROM_RAW_TEMPERATURE ((2*0x12B) | EEPROM_CALIB_ALL)
-
-
-/* agn links */
-#define EEPROM_LINK_HOST (2*0x64)
-#define EEPROM_LINK_GENERAL (2*0x65)
-#define EEPROM_LINK_REGULATORY (2*0x66)
-#define EEPROM_LINK_CALIBRATION (2*0x67)
-#define EEPROM_LINK_PROCESS_ADJST (2*0x68)
-#define EEPROM_LINK_OTHERS (2*0x69)
-#define EEPROM_LINK_TXP_LIMIT (2*0x6a)
-#define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b)
-
-/* agn regulatory - indirect access */
-#define EEPROM_REG_BAND_1_CHANNELS ((0x08)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 28 bytes */
-#define EEPROM_REG_BAND_2_CHANNELS ((0x26)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 26 bytes */
-#define EEPROM_REG_BAND_3_CHANNELS ((0x42)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
-#define EEPROM_REG_BAND_4_CHANNELS ((0x5C)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */
-#define EEPROM_REG_BAND_5_CHANNELS ((0x74)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 12 bytes */
-#define EEPROM_REG_BAND_24_HT40_CHANNELS ((0x82)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */
-#define EEPROM_REG_BAND_52_HT40_CHANNELS ((0x92)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */
-
-/* 6000 regulatory - indirect access */
-#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS ((0x80)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */
-/* 2.4 GHz */
-extern const u8 iwl_eeprom_band_1[14];
-
-#define ADDRESS_MSK 0x0000FFFF
-#define INDIRECT_TYPE_MSK 0x000F0000
-#define INDIRECT_HOST 0x00010000
-#define INDIRECT_GENERAL 0x00020000
-#define INDIRECT_REGULATORY 0x00030000
-#define INDIRECT_CALIBRATION 0x00040000
-#define INDIRECT_PROCESS_ADJST 0x00050000
-#define INDIRECT_OTHERS 0x00060000
-#define INDIRECT_TXP_LIMIT 0x00070000
-#define INDIRECT_TXP_LIMIT_SIZE 0x00080000
-#define INDIRECT_ADDRESS 0x00100000
-
-/* General */
-#define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */
-#define EEPROM_SUBSYSTEM_ID (2*0x0A) /* 2 bytes */
-#define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */
-#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */
-#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */
-#define EEPROM_VERSION (2*0x44) /* 2 bytes */
-#define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */
-#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */
-#define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */
-#define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */
-
-/* The following masks are to be applied on EEPROM_RADIO_CONFIG */
-#define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */
-#define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */
-#define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */
-#define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */
-#define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */
-#define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */
-
-#define EEPROM_RF_CONFIG_TYPE_MAX 0x3
-
-#define EEPROM_REGULATORY_BAND_NO_HT40 (0)
-
-struct iwl_eeprom_ops {
- const u32 regulatory_bands[7];
- bool enhanced_txpower;
-};
-
-
-int iwl_eeprom_init(struct iwl_priv *priv, u32 hw_rev);
-void iwl_eeprom_free(struct iwl_priv *priv);
-int iwl_eeprom_check_version(struct iwl_priv *priv);
-int iwl_eeprom_init_hw_params(struct iwl_priv *priv);
-u16 iwl_eeprom_calib_version(struct iwl_priv *priv);
-const u8 *iwl_eeprom_query_addr(struct iwl_priv *priv, size_t offset);
-u16 iwl_eeprom_query16(struct iwl_priv *priv, size_t offset);
-void iwl_eeprom_get_mac(struct iwl_priv *priv, u8 *mac);
-int iwl_init_channel_map(struct iwl_priv *priv);
-void iwl_free_channel_map(struct iwl_priv *priv);
-const struct iwl_channel_info *iwl_get_channel_info(
- const struct iwl_priv *priv,
- enum ieee80211_band band, u16 channel);
-void iwl_rf_config(struct iwl_priv *priv);
-
-#endif /* __iwl_eeprom_h__ */
}
EXPORT_SYMBOL_GPL(iwl_clear_bit);
+void iwl_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 v;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ WARN_ON_ONCE(value & ~mask);
+#endif
+
+ spin_lock_irqsave(&trans->reg_lock, flags);
+ v = iwl_read32(trans, reg);
+ v &= ~mask;
+ v |= value;
+ iwl_write32(trans, reg, v);
+ spin_unlock_irqrestore(&trans->reg_lock, flags);
+}
+EXPORT_SYMBOL_GPL(iwl_set_bits_mask);
+
int iwl_poll_bit(struct iwl_trans *trans, u32 addr,
u32 bits, u32 mask, int timeout)
{
void iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask);
void iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask);
+void iwl_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value);
+
int iwl_poll_bit(struct iwl_trans *trans, u32 addr,
u32 bits, u32 mask, int timeout);
int iwl_poll_direct_bit(struct iwl_trans *trans, u32 addr, u32 mask,
op_mode->ops->wimax_active(op_mode);
}
-/*****************************************************
-* Op mode layers implementations
-******************************************************/
-extern const struct iwl_op_mode_ops iwl_dvm_ops;
-
#endif /* __iwl_op_mode_h__ */
#define SCD_QUEUE_STTS_REG_POS_ACTIVE (3)
#define SCD_QUEUE_STTS_REG_POS_WSL (4)
#define SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19)
-#define SCD_QUEUE_STTS_REG_MSK (0x00FF0000)
+#define SCD_QUEUE_STTS_REG_MSK (0x017F0000)
#define SCD_QUEUE_CTX_REG1_CREDIT_POS (8)
#define SCD_QUEUE_CTX_REG1_CREDIT_MSK (0x00FFFF00)
* Must be atomic
* @reclaim: free packet until ssn. Returns a list of freed packets.
* Must be atomic
- * @tx_agg_setup: setup a tx queue for AMPDU - will be called once the HW is
+ * @txq_enable: setup a tx queue for AMPDU - will be called once the HW is
* ready and a successful ADDBA response has been received.
* May sleep
- * @tx_agg_disable: de-configure a Tx queue to send AMPDUs
+ * @txq_disable: de-configure a Tx queue to send AMPDUs
* Must be atomic
* @wait_tx_queue_empty: wait until all tx queues are empty
* May sleep
void (*reclaim)(struct iwl_trans *trans, int queue, int ssn,
struct sk_buff_head *skbs);
- void (*tx_agg_setup)(struct iwl_trans *trans, int queue, int fifo,
- int sta_id, int tid, int frame_limit, u16 ssn);
- void (*tx_agg_disable)(struct iwl_trans *trans, int queue);
+ void (*txq_enable)(struct iwl_trans *trans, int queue, int fifo,
+ int sta_id, int tid, int frame_limit, u16 ssn);
+ void (*txq_disable)(struct iwl_trans *trans, int queue);
int (*dbgfs_register)(struct iwl_trans *trans, struct dentry* dir);
int (*wait_tx_queue_empty)(struct iwl_trans *trans);
* @hw_id_str: a string with info about HW ID. Set during transport allocation.
* @pm_support: set to true in start_hw if link pm is supported
* @wait_command_queue: the wait_queue for SYNC host commands
+ * @dev_cmd_pool: pool for Tx cmd allocation - for internal use only.
+ * The user should use iwl_trans_{alloc,free}_tx_cmd.
+ * @dev_cmd_headroom: room needed for the transport's private use before the
+ * device_cmd for Tx - for internal use only
+ * The user should use iwl_trans_{alloc,free}_tx_cmd.
*/
struct iwl_trans {
const struct iwl_trans_ops *ops;
wait_queue_head_t wait_command_queue;
+ /* The following fields are internal only */
+ struct kmem_cache *dev_cmd_pool;
+ size_t dev_cmd_headroom;
+
/* pointer to trans specific struct */
/*Ensure that this pointer will always be aligned to sizeof pointer */
char trans_specific[0] __aligned(sizeof(void *));
return trans->ops->send_cmd(trans, cmd);
}
+static inline struct iwl_device_cmd *
+iwl_trans_alloc_tx_cmd(struct iwl_trans *trans)
+{
+ u8 *dev_cmd_ptr = kmem_cache_alloc(trans->dev_cmd_pool, GFP_ATOMIC);
+
+ if (unlikely(dev_cmd_ptr == NULL))
+ return NULL;
+
+ return (struct iwl_device_cmd *)
+ (dev_cmd_ptr + trans->dev_cmd_headroom);
+}
+
+static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans,
+ struct iwl_device_cmd *dev_cmd)
+{
+ u8 *dev_cmd_ptr = (u8 *)dev_cmd - trans->dev_cmd_headroom;
+
+ kmem_cache_free(trans->dev_cmd_pool, dev_cmd_ptr);
+}
+
static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb,
struct iwl_device_cmd *dev_cmd, int queue)
{
trans->ops->reclaim(trans, queue, ssn, skbs);
}
-static inline void iwl_trans_tx_agg_disable(struct iwl_trans *trans, int queue)
+static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue)
{
WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE,
"%s bad state = %d", __func__, trans->state);
- trans->ops->tx_agg_disable(trans, queue);
+ trans->ops->txq_disable(trans, queue);
}
-static inline void iwl_trans_tx_agg_setup(struct iwl_trans *trans, int queue,
- int fifo, int sta_id, int tid,
- int frame_limit, u16 ssn)
+static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue,
+ int fifo, int sta_id, int tid,
+ int frame_limit, u16 ssn)
{
might_sleep();
WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE,
"%s bad state = %d", __func__, trans->state);
- trans->ops->tx_agg_setup(trans, queue, fifo, sta_id, tid,
+ trans->ops->txq_enable(trans, queue, fifo, sta_id, tid,
frame_limit, ssn);
}
#include <linux/module.h>
#include <linux/stringify.h>
#include "iwl-config.h"
-#include "iwl-cfg.h"
#include "iwl-csr.h"
#include "iwl-agn-hw.h"
+#include "cfg.h"
/* Highest firmware API version supported */
#define IWL1000_UCODE_API_MAX 5
.support_ct_kill_exit = true,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF,
.chain_noise_scale = 1000,
- .wd_timeout = IWL_WATCHHDOG_DISABLED,
+ .wd_timeout = IWL_WATCHDOG_DISABLED,
.max_event_log_size = 128,
};
static const struct iwl_ht_params iwl1000_ht_params = {
.ht_greenfield_support = true,
.use_rts_for_aggregation = true, /* use rts/cts protection */
+ .ht40_bands = BIT(IEEE80211_BAND_2GHZ),
+};
+
+static const struct iwl_eeprom_params iwl1000_eeprom_params = {
+ .regulatory_bands = {
+ EEPROM_REG_BAND_1_CHANNELS,
+ EEPROM_REG_BAND_2_CHANNELS,
+ EEPROM_REG_BAND_3_CHANNELS,
+ EEPROM_REG_BAND_4_CHANNELS,
+ EEPROM_REG_BAND_5_CHANNELS,
+ EEPROM_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_REGULATORY_BAND_NO_HT40,
+ }
};
#define IWL_DEVICE_1000 \
.eeprom_ver = EEPROM_1000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \
.base_params = &iwl1000_base_params, \
+ .eeprom_params = &iwl1000_eeprom_params, \
.led_mode = IWL_LED_BLINK
const struct iwl_cfg iwl1000_bgn_cfg = {
.eeprom_ver = EEPROM_1000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \
.base_params = &iwl1000_base_params, \
+ .eeprom_params = &iwl1000_eeprom_params, \
.led_mode = IWL_LED_RF_STATE, \
.rx_with_siso_diversity = true
#include <linux/module.h>
#include <linux/stringify.h>
#include "iwl-config.h"
-#include "iwl-cfg.h"
#include "iwl-agn-hw.h"
-#include "iwl-commands.h" /* needed for BT for now */
+#include "cfg.h"
+#include "dvm/commands.h" /* needed for BT for now */
/* Highest firmware API version supported */
#define IWL2030_UCODE_API_MAX 6
static const struct iwl_ht_params iwl2000_ht_params = {
.ht_greenfield_support = true,
.use_rts_for_aggregation = true, /* use rts/cts protection */
+ .ht40_bands = BIT(IEEE80211_BAND_2GHZ),
};
static const struct iwl_bt_params iwl2030_bt_params = {
.bt_session_2 = true,
};
+static const struct iwl_eeprom_params iwl20x0_eeprom_params = {
+ .regulatory_bands = {
+ EEPROM_REG_BAND_1_CHANNELS,
+ EEPROM_REG_BAND_2_CHANNELS,
+ EEPROM_REG_BAND_3_CHANNELS,
+ EEPROM_REG_BAND_4_CHANNELS,
+ EEPROM_REG_BAND_5_CHANNELS,
+ EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_REGULATORY_BAND_NO_HT40,
+ },
+ .enhanced_txpower = true,
+};
+
#define IWL_DEVICE_2000 \
.fw_name_pre = IWL2000_FW_PRE, \
.ucode_api_max = IWL2000_UCODE_API_MAX, \
.eeprom_ver = EEPROM_2000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
.base_params = &iwl2000_base_params, \
+ .eeprom_params = &iwl20x0_eeprom_params, \
.need_temp_offset_calib = true, \
.temp_offset_v2 = true, \
.led_mode = IWL_LED_RF_STATE
.eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
.base_params = &iwl2030_base_params, \
.bt_params = &iwl2030_bt_params, \
+ .eeprom_params = &iwl20x0_eeprom_params, \
.need_temp_offset_calib = true, \
.temp_offset_v2 = true, \
.led_mode = IWL_LED_RF_STATE, \
.eeprom_ver = EEPROM_2000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
.base_params = &iwl2000_base_params, \
+ .eeprom_params = &iwl20x0_eeprom_params, \
.need_temp_offset_calib = true, \
.temp_offset_v2 = true, \
.led_mode = IWL_LED_RF_STATE, \
.eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
.base_params = &iwl2030_base_params, \
.bt_params = &iwl2030_bt_params, \
+ .eeprom_params = &iwl20x0_eeprom_params, \
.need_temp_offset_calib = true, \
.temp_offset_v2 = true, \
.led_mode = IWL_LED_RF_STATE, \
#include <linux/module.h>
#include <linux/stringify.h>
#include "iwl-config.h"
-#include "iwl-cfg.h"
#include "iwl-agn-hw.h"
#include "iwl-csr.h"
+#include "cfg.h"
/* Highest firmware API version supported */
#define IWL5000_UCODE_API_MAX 5
.led_compensation = 51,
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
.chain_noise_scale = 1000,
- .wd_timeout = IWL_WATCHHDOG_DISABLED,
+ .wd_timeout = IWL_WATCHDOG_DISABLED,
.max_event_log_size = 512,
.no_idle_support = true,
};
static const struct iwl_ht_params iwl5000_ht_params = {
.ht_greenfield_support = true,
+ .ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ),
+};
+
+static const struct iwl_eeprom_params iwl5000_eeprom_params = {
+ .regulatory_bands = {
+ EEPROM_REG_BAND_1_CHANNELS,
+ EEPROM_REG_BAND_2_CHANNELS,
+ EEPROM_REG_BAND_3_CHANNELS,
+ EEPROM_REG_BAND_4_CHANNELS,
+ EEPROM_REG_BAND_5_CHANNELS,
+ EEPROM_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_REG_BAND_52_HT40_CHANNELS
+ },
};
#define IWL_DEVICE_5000 \
.eeprom_ver = EEPROM_5000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, \
.base_params = &iwl5000_base_params, \
+ .eeprom_params = &iwl5000_eeprom_params, \
.led_mode = IWL_LED_BLINK
const struct iwl_cfg iwl5300_agn_cfg = {
.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
.base_params = &iwl5000_base_params,
+ .eeprom_params = &iwl5000_eeprom_params,
.ht_params = &iwl5000_ht_params,
.led_mode = IWL_LED_BLINK,
.internal_wimax_coex = true,
.eeprom_ver = EEPROM_5050_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION, \
.base_params = &iwl5000_base_params, \
+ .eeprom_params = &iwl5000_eeprom_params, \
.no_xtal_calib = true, \
.led_mode = IWL_LED_BLINK, \
.internal_wimax_coex = true
#include <linux/module.h>
#include <linux/stringify.h>
#include "iwl-config.h"
-#include "iwl-cfg.h"
#include "iwl-agn-hw.h"
-#include "iwl-commands.h" /* needed for BT for now */
+#include "cfg.h"
+#include "dvm/commands.h" /* needed for BT for now */
/* Highest firmware API version supported */
#define IWL6000_UCODE_API_MAX 6
static const struct iwl_ht_params iwl6000_ht_params = {
.ht_greenfield_support = true,
.use_rts_for_aggregation = true, /* use rts/cts protection */
+ .ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ),
};
static const struct iwl_bt_params iwl6000_bt_params = {
.bt_sco_disable = true,
};
+static const struct iwl_eeprom_params iwl6000_eeprom_params = {
+ .regulatory_bands = {
+ EEPROM_REG_BAND_1_CHANNELS,
+ EEPROM_REG_BAND_2_CHANNELS,
+ EEPROM_REG_BAND_3_CHANNELS,
+ EEPROM_REG_BAND_4_CHANNELS,
+ EEPROM_REG_BAND_5_CHANNELS,
+ EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_REG_BAND_52_HT40_CHANNELS
+ },
+ .enhanced_txpower = true,
+};
+
#define IWL_DEVICE_6005 \
.fw_name_pre = IWL6005_FW_PRE, \
.ucode_api_max = IWL6000G2_UCODE_API_MAX, \
.eeprom_ver = EEPROM_6005_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6005_TX_POWER_VERSION, \
.base_params = &iwl6000_g2_base_params, \
+ .eeprom_params = &iwl6000_eeprom_params, \
.need_temp_offset_calib = true, \
.led_mode = IWL_LED_RF_STATE
.eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION, \
.base_params = &iwl6000_g2_base_params, \
.bt_params = &iwl6000_bt_params, \
+ .eeprom_params = &iwl6000_eeprom_params, \
.need_temp_offset_calib = true, \
.led_mode = IWL_LED_RF_STATE, \
.adv_pm = true \
.eeprom_ver = EEPROM_6000_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, \
.base_params = &iwl6000_base_params, \
+ .eeprom_params = &iwl6000_eeprom_params, \
.led_mode = IWL_LED_BLINK
const struct iwl_cfg iwl6000i_2agn_cfg = {
.eeprom_ver = EEPROM_6050_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, \
.base_params = &iwl6050_base_params, \
+ .eeprom_params = &iwl6000_eeprom_params, \
.led_mode = IWL_LED_BLINK, \
.internal_wimax_coex = true
.eeprom_ver = EEPROM_6150_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, \
.base_params = &iwl6050_base_params, \
+ .eeprom_params = &iwl6000_eeprom_params, \
.led_mode = IWL_LED_BLINK, \
.internal_wimax_coex = true
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
.base_params = &iwl6000_base_params,
+ .eeprom_params = &iwl6000_eeprom_params,
.ht_params = &iwl6000_ht_params,
.led_mode = IWL_LED_BLINK,
};
#include <linux/pci-aspm.h>
#include "iwl-trans.h"
-#include "iwl-cfg.h"
#include "iwl-drv.h"
#include "iwl-trans.h"
-#include "iwl-trans-pcie-int.h"
+
+#include "cfg.h"
+#include "internal.h"
#define IWL_PCI_DEVICE(dev, subdev, cfg) \
.vendor = PCI_VENDOR_ID_INTEL, .device = (dev), \
void iwl_trans_txq_update_byte_cnt_tbl(struct iwl_trans *trans,
struct iwl_tx_queue *txq,
u16 byte_cnt);
-void iwl_trans_pcie_tx_agg_disable(struct iwl_trans *trans, int queue);
+void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int queue);
void iwl_trans_set_wr_ptrs(struct iwl_trans *trans, int txq_id, u32 index);
void iwl_trans_tx_queue_set_status(struct iwl_trans *trans,
struct iwl_tx_queue *txq,
int tx_fifo_id, bool active);
-void iwl_trans_pcie_tx_agg_setup(struct iwl_trans *trans, int queue, int fifo,
- int sta_id, int tid, int frame_limit, u16 ssn);
+void __iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id,
+ int fifo, int sta_id, int tid,
+ int frame_limit, u16 ssn);
+void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, int fifo,
+ int sta_id, int tid, int frame_limit, u16 ssn);
void iwl_txq_free_tfd(struct iwl_trans *trans, struct iwl_tx_queue *txq,
enum dma_data_direction dma_dir);
int iwl_tx_queue_reclaim(struct iwl_trans *trans, int txq_id, int index,
#include "iwl-prph.h"
#include "iwl-io.h"
-#include "iwl-trans-pcie-int.h"
+#include "internal.h"
#include "iwl-op-mode.h"
#ifdef CONFIG_IWLWIFI_IDI
#include "iwl-drv.h"
#include "iwl-trans.h"
-#include "iwl-trans-pcie-int.h"
#include "iwl-csr.h"
#include "iwl-prph.h"
-#include "iwl-eeprom.h"
#include "iwl-agn-hw.h"
+#include "internal.h"
/* FIXME: need to abstract out TX command (once we know what it looks like) */
-#include "iwl-commands.h"
+#include "dvm/commands.h"
#define SCD_QUEUECHAIN_SEL_ALL(trans, trans_pcie) \
(((1<<trans->cfg->base_params->num_of_queues) - 1) &\
spin_lock_irqsave(&trans_pcie->irq_lock, flags);
+ /* make sure all queue are not stopped/used */
+ memset(trans_pcie->queue_stopped, 0, sizeof(trans_pcie->queue_stopped));
+ memset(trans_pcie->queue_used, 0, sizeof(trans_pcie->queue_used));
+
trans_pcie->scd_base_addr =
iwl_read_prph(trans, SCD_SRAM_BASE_ADDR);
a = trans_pcie->scd_base_addr + SCD_CONTEXT_MEM_LOWER_BOUND;
iwl_write_prph(trans, SCD_DRAM_BASE_ADDR,
trans_pcie->scd_bc_tbls.dma >> 10);
+ for (i = 0; i < trans_pcie->n_q_to_fifo; i++) {
+ int fifo = trans_pcie->setup_q_to_fifo[i];
+
+ __iwl_trans_pcie_txq_enable(trans, i, fifo, IWL_INVALID_STATION,
+ IWL_TID_NON_QOS,
+ SCD_FRAME_LIMIT, 0);
+ }
+
+ /* Activate all Tx DMA/FIFO channels */
+ iwl_trans_txq_set_sched(trans, IWL_MASK(0, 7));
+
/* Enable DMA channel */
for (chan = 0; chan < FH_TCSR_CHNL_NUM ; chan++)
iwl_write_direct32(trans, FH_TCSR_CHNL_TX_CONFIG_REG(chan),
- FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
- FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);
+ FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
+ FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);
/* Update FH chicken bits */
reg_val = iwl_read_direct32(trans, FH_TX_CHICKEN_BITS_REG);
iwl_write_direct32(trans, FH_TX_CHICKEN_BITS_REG,
reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
- iwl_write_prph(trans, SCD_QUEUECHAIN_SEL,
- SCD_QUEUECHAIN_SEL_ALL(trans, trans_pcie));
- iwl_write_prph(trans, SCD_AGGR_SEL, 0);
-
- /* initiate the queues */
- for (i = 0; i < trans->cfg->base_params->num_of_queues; i++) {
- iwl_write_prph(trans, SCD_QUEUE_RDPTR(i), 0);
- iwl_write_direct32(trans, HBUS_TARG_WRPTR, 0 | (i << 8));
- iwl_write_targ_mem(trans, trans_pcie->scd_base_addr +
- SCD_CONTEXT_QUEUE_OFFSET(i), 0);
- iwl_write_targ_mem(trans, trans_pcie->scd_base_addr +
- SCD_CONTEXT_QUEUE_OFFSET(i) +
- sizeof(u32),
- ((SCD_WIN_SIZE <<
- SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) &
- SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) |
- ((SCD_FRAME_LIMIT <<
- SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
- SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK));
- }
-
- iwl_write_prph(trans, SCD_INTERRUPT_MASK,
- IWL_MASK(0, trans->cfg->base_params->num_of_queues));
-
- /* Activate all Tx DMA/FIFO channels */
- iwl_trans_txq_set_sched(trans, IWL_MASK(0, 7));
-
- iwl_trans_set_wr_ptrs(trans, trans_pcie->cmd_queue, 0);
-
- /* make sure all queue are not stopped/used */
- memset(trans_pcie->queue_stopped, 0, sizeof(trans_pcie->queue_stopped));
- memset(trans_pcie->queue_used, 0, sizeof(trans_pcie->queue_used));
-
- for (i = 0; i < trans_pcie->n_q_to_fifo; i++) {
- int fifo = trans_pcie->setup_q_to_fifo[i];
-
- set_bit(i, trans_pcie->queue_used);
-
- iwl_trans_tx_queue_set_status(trans, &trans_pcie->txq[i],
- fifo, true);
- }
-
spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
/* Enable L1-Active */
iounmap(trans_pcie->hw_base);
pci_release_regions(trans_pcie->pci_dev);
pci_disable_device(trans_pcie->pci_dev);
+ kmem_cache_destroy(trans->dev_cmd_pool);
kfree(trans);
}
.tx = iwl_trans_pcie_tx,
.reclaim = iwl_trans_pcie_reclaim,
- .tx_agg_disable = iwl_trans_pcie_tx_agg_disable,
- .tx_agg_setup = iwl_trans_pcie_tx_agg_setup,
+ .txq_disable = iwl_trans_pcie_txq_disable,
+ .txq_enable = iwl_trans_pcie_txq_enable,
.dbgfs_register = iwl_trans_pcie_dbgfs_register,
{
struct iwl_trans_pcie *trans_pcie;
struct iwl_trans *trans;
+ char cmd_pool_name[100];
u16 pci_cmd;
int err;
init_waitqueue_head(&trans->wait_command_queue);
spin_lock_init(&trans->reg_lock);
+ snprintf(cmd_pool_name, sizeof(cmd_pool_name), "iwl_cmd_pool:%s",
+ dev_name(trans->dev));
+
+ trans->dev_cmd_headroom = 0;
+ trans->dev_cmd_pool =
+ kmem_cache_create(cmd_pool_name,
+ sizeof(struct iwl_device_cmd)
+ + trans->dev_cmd_headroom,
+ sizeof(void *),
+ SLAB_HWCACHE_ALIGN,
+ NULL);
+
+ if (!trans->dev_cmd_pool)
+ goto out_pci_disable_msi;
+
return trans;
+out_pci_disable_msi:
+ pci_disable_msi(pdev);
out_pci_release_regions:
pci_release_regions(pdev);
out_pci_disable_device:
#include "iwl-csr.h"
#include "iwl-prph.h"
#include "iwl-io.h"
-#include "iwl-agn-hw.h"
#include "iwl-op-mode.h"
-#include "iwl-trans-pcie-int.h"
+#include "internal.h"
/* FIXME: need to abstract out TX command (once we know what it looks like) */
-#include "iwl-commands.h"
+#include "dvm/commands.h"
#define IWL_TX_CRC_SIZE 4
#define IWL_TX_DELIMITER_SIZE 4
IWL_DEBUG_TX_QUEUES(trans, "Deactivate queue %d\n", txq_id);
}
-void iwl_trans_pcie_tx_agg_setup(struct iwl_trans *trans, int txq_id, int fifo,
- int sta_id, int tid, int frame_limit, u16 ssn)
+void __iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id,
+ int fifo, int sta_id, int tid,
+ int frame_limit, u16 ssn)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
- unsigned long flags;
- u16 ra_tid = BUILD_RAxTID(sta_id, tid);
+
+ lockdep_assert_held(&trans_pcie->irq_lock);
if (test_and_set_bit(txq_id, trans_pcie->queue_used))
WARN_ONCE(1, "queue %d already used - expect issues", txq_id);
- spin_lock_irqsave(&trans_pcie->irq_lock, flags);
-
/* Stop this Tx queue before configuring it */
iwlagn_tx_queue_stop_scheduler(trans, txq_id);
- /* Map receiver-address / traffic-ID to this queue */
- iwlagn_tx_queue_set_q2ratid(trans, ra_tid, txq_id);
+ /* Set this queue as a chain-building queue unless it is CMD queue */
+ if (txq_id != trans_pcie->cmd_queue)
+ iwl_set_bits_prph(trans, SCD_QUEUECHAIN_SEL, BIT(txq_id));
- /* Set this queue as a chain-building queue */
- iwl_set_bits_prph(trans, SCD_QUEUECHAIN_SEL, BIT(txq_id));
+ /* If this queue is mapped to a certain station: it is an AGG queue */
+ if (sta_id != IWL_INVALID_STATION) {
+ u16 ra_tid = BUILD_RAxTID(sta_id, tid);
- /* enable aggregations for the queue */
- iwl_set_bits_prph(trans, SCD_AGGR_SEL, BIT(txq_id));
+ /* Map receiver-address / traffic-ID to this queue */
+ iwlagn_tx_queue_set_q2ratid(trans, ra_tid, txq_id);
+
+ /* enable aggregations for the queue */
+ iwl_set_bits_prph(trans, SCD_AGGR_SEL, BIT(txq_id));
+ }
/* Place first TFD at index corresponding to start sequence number.
* Assumes that ssn_idx is valid (!= 0xFFF) */
/* Set up Tx window size and frame limit for this queue */
iwl_write_targ_mem(trans, trans_pcie->scd_base_addr +
+ SCD_CONTEXT_QUEUE_OFFSET(txq_id), 0);
+ iwl_write_targ_mem(trans, trans_pcie->scd_base_addr +
SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32),
((frame_limit << SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) &
SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) |
((frame_limit << SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK));
- iwl_set_bits_prph(trans, SCD_INTERRUPT_MASK, (1 << txq_id));
-
/* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
iwl_trans_tx_queue_set_status(trans, &trans_pcie->txq[txq_id],
fifo, true);
+}
+
+void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, int fifo,
+ int sta_id, int tid, int frame_limit, u16 ssn)
+{
+ struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+ unsigned long flags;
+
+ spin_lock_irqsave(&trans_pcie->irq_lock, flags);
+
+ __iwl_trans_pcie_txq_enable(trans, txq_id, fifo, sta_id,
+ tid, frame_limit, ssn);
spin_unlock_irqrestore(&trans_pcie->irq_lock, flags);
}
-void iwl_trans_pcie_tx_agg_disable(struct iwl_trans *trans, int txq_id)
+void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int txq_id)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
trans_pcie->txq[txq_id].q.write_ptr = 0;
iwl_trans_set_wr_ptrs(trans, txq_id, 0);
- iwl_clear_bits_prph(trans, SCD_INTERRUPT_MASK, BIT(txq_id));
-
iwl_trans_tx_queue_set_status(trans, &trans_pcie->txq[txq_id],
0, false);
}
projects / platform / kernel / linux-arm64.git / commitdiff