if (reg < 0x3000)
req.index = CMD_USB_WR;
- else
+ else if (reg < 0x4000)
req.index = CMD_SYS_WR;
+ else
+ req.index = CMD_IR_WR;
req.value = reg;
req.size = len;
if (reg < 0x3000)
req.index = CMD_USB_RD;
- else
+ else if (reg < 0x4000)
req.index = CMD_SYS_RD;
+ else
+ req.index = CMD_IR_RD;
req.value = reg;
req.size = len;
.agc_targ_val = 0x3e,
};
-static int rtl28xxu_frontend_attach(struct dvb_usb_adapter *adap)
+static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
{
int ret;
struct rtl28xxu_priv *priv = adap->dev->priv;
u8 buf[1];
struct rtl2830_config *rtl2830_config;
+ /* open RTL2831U/RTL2830 I2C gate */
+ struct rtl28xxu_req req_gate = {0x0120, 0x0011, 0x0001, "\x08"};
/* for MT2060 tuner probe */
struct rtl28xxu_req req_mt2060 = {0x00c0, CMD_I2C_RD, 1, buf};
/* for QT1010 tuner probe */
struct rtl28xxu_req req_qt1010 = {0x0fc4, CMD_I2C_RD, 1, buf};
- /* open RTL2831U/RTL2830 I2C gate */
- struct rtl28xxu_req req_gate = {0x0120, 0x0011, 0x0001, "\x08"};
deb_info("%s:\n", __func__);
return ret;
}
+static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ int ret;
+ struct rtl28xxu_priv *priv = adap->dev->priv;
+ u8 buf[1];
+ /* open RTL2832U/RTL2832 I2C gate */
+ struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"};
+ /* close RTL2832U/RTL2832 I2C gate */
+ struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"};
+ /* for FC2580 tuner probe */
+ struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf};
+
+ deb_info("%s:\n", __func__);
+
+ /* GPIO direction */
+ ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_DIR, 0x0a);
+ if (ret)
+ goto err;
+
+ /* enable as output GPIO0, GPIO2, GPIO4 */
+ ret = rtl2831_wr_reg(adap->dev, SYS_GPIO_OUT_EN, 0x15);
+ if (ret)
+ goto err;
+
+ ret = rtl2831_wr_reg(adap->dev, SYS_DEMOD_CTL, 0xe8);
+ if (ret)
+ goto err;
+
+ /*
+ * Probe used tuner. We need to know used tuner before demod attach
+ * since there is some demod params needed to set according to tuner.
+ */
+
+ /* open demod I2C gate */
+ ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_open);
+ if (ret)
+ goto err;
+
+ /* check FC2580 ID register; reg=01 val=56 */
+ ret = rtl28xxu_ctrl_msg(adap->dev, &req_fc2580);
+ if (ret == 0 && buf[0] == 0x56) {
+ priv->tuner = TUNER_RTL2832_FC2580;
+ deb_info("%s: FC2580\n", __func__);
+ goto found;
+ } else {
+ deb_info("%s: FC2580 probe failed=%d - %02x\n",
+ __func__, ret, buf[0]);
+ }
+
+ /* close demod I2C gate */
+ ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close);
+ if (ret)
+ goto err;
+
+ /* tuner not found */
+ ret = -ENODEV;
+ goto err;
+
+found:
+ /* close demod I2C gate */
+ ret = rtl28xxu_ctrl_msg(adap->dev, &req_gate_close);
+ if (ret)
+ goto err;
+
+ /* attach demodulator */
+ /* TODO: */
+
+ return ret;
+err:
+ deb_info("%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
static struct qt1010_config rtl28xxu_qt1010_config = {
.i2c_address = 0x62, /* 0xc4 */
};
.AgcMasterByte = 0x00,
};
-static int rtl28xxu_tuner_attach(struct dvb_usb_adapter *adap)
+static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap)
{
int ret;
struct rtl28xxu_priv *priv = adap->dev->priv;
return ret;
}
+static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ int ret;
+ struct rtl28xxu_priv *priv = adap->dev->priv;
+ struct dvb_frontend *fe = NULL;
+
+ deb_info("%s:\n", __func__);
+
+ switch (priv->tuner) {
+ case TUNER_RTL2832_FC2580:
+ /* TODO: */
+ break;
+ default:
+ err("unknown tuner=%d", priv->tuner);
+ }
+
+ if (fe == NULL) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ return 0;
+err:
+ deb_info("%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
static int rtl28xxu_streaming_ctrl(struct dvb_usb_adapter *adap , int onoff)
{
int ret;
sys0 = sys0 & 0x0f;
sys0 |= 0xe0;
} else {
-
-#if 0 /* keep */
/*
* FIXME: Use .fe_ioctl_override() to prevent demod
- * IOCTLs in case of device is powered off.
- *
- * For now we cannot power off device because most FE IOCTLs
- * can be performed only when device is powered.
- * Using IOCTLs when device is powered off will result errors
- * because register access to demod fails.
+ * IOCTLs in case of device is powered off. Or change
+ * RTL2830 demod not perform requestesd IOCTL & IO when sleep.
*/
gpio &= (~0x01); /* GPIO0 = 0 */
gpio |= 0x10; /* GPIO4 = 1 */
sys0 = sys0 & (~0xc0);
-#endif
}
deb_info("%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__, sys0, gpio);
return ret;
}
-static int rtl28xxu_rc_query(struct dvb_usb_device *d)
+static int rtl2831u_rc_query(struct dvb_usb_device *d)
{
- int ret;
+ int ret, i;
+ struct rtl28xxu_priv *priv = d->priv;
u8 buf[5];
u32 rc_code;
+ struct rtl28xxu_reg_val rc_nec_tab[] = {
+ { 0x3033, 0x80 },
+ { 0x3020, 0x43 },
+ { 0x3021, 0x16 },
+ { 0x3022, 0x16 },
+ { 0x3023, 0x5a },
+ { 0x3024, 0x2d },
+ { 0x3025, 0x16 },
+ { 0x3026, 0x01 },
+ { 0x3028, 0xb0 },
+ { 0x3029, 0x04 },
+ { 0x302c, 0x88 },
+ { 0x302e, 0x13 },
+ { 0x3030, 0xdf },
+ { 0x3031, 0x05 },
+ };
+
+ /* init remote controller */
+ if (!priv->rc_active) {
+ for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) {
+ ret = rtl2831_wr_reg(d, rc_nec_tab[i].reg,
+ rc_nec_tab[i].val);
+ if (ret)
+ goto err;
+ }
+ priv->rc_active = true;
+ }
ret = rtl2831_rd_regs(d, SYS_IRRC_RP, buf, 5);
if (ret)
return ret;
}
+
+static int rtl2832u_rc_query(struct dvb_usb_device *d)
+{
+ int ret, i;
+ struct rtl28xxu_priv *priv = d->priv;
+ u8 buf[128];
+ int len;
+ struct rtl28xxu_reg_val rc_nec_tab[] = {
+ {IR_RX_CTRL, 0x20},
+ {IR_RX_BUF_CTRL, 0x80},
+ {IR_RX_IF, 0xff},
+ {IR_RX_IE, 0xff},
+ {IR_MAX_DURATION0, 0xd0},
+ {IR_MAX_DURATION1, 0x07},
+ {IR_IDLE_LEN0, 0xc0},
+ {IR_IDLE_LEN1, 0x00},
+ {IR_GLITCH_LEN, 0x03},
+ {IR_RX_CLK, 0x09},
+ {IR_RX_CFG, 0x1c},
+ {IR_MAX_H_TOL_LEN, 0x1e},
+ {IR_MAX_L_TOL_LEN, 0x1e},
+ {IR_RX_CTRL, 0x80},
+ };
+
+ /* init remote controller */
+ if (!priv->rc_active) {
+ for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) {
+ ret = rtl2831_wr_reg(d, rc_nec_tab[i].reg,
+ rc_nec_tab[i].val);
+ if (ret)
+ goto err;
+ }
+ priv->rc_active = true;
+ }
+
+ ret = rtl2831_rd_reg(d, IR_RX_IF, &buf[0]);
+ if (ret)
+ goto err;
+
+ if (buf[0] != 0x83)
+ goto exit;
+
+ ret = rtl2831_rd_reg(d, IR_RX_BC, &buf[0]);
+ if (ret)
+ goto err;
+
+ len = buf[0];
+ ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len);
+
+ /* TODO: pass raw IR to Kernel IR decoder */
+
+ ret = rtl2831_wr_reg(d, IR_RX_IF, 0x03);
+ ret = rtl2831_wr_reg(d, IR_RX_BUF_CTRL, 0x80);
+ ret = rtl2831_wr_reg(d, IR_RX_CTRL, 0x80);
+
+exit:
+ return ret;
+err:
+ deb_info("%s: failed=%d\n", __func__, ret);
+ return ret;
+}
+
+
/* DVB USB Driver stuff */
#define USB_VID_REALTEK 0x0bda
+#define USB_VID_DEXATEK 0x1D19
#define USB_PID_RTL2831U 0x2831
+#define USB_PID_RTL2832U 0x2832
#define USB_PID_FREECOM 0x0160
+#define USB_PID_DEXATEK_1101 0x1101
#define RTL2831U_0BDA_2831 0
#define RTL2831U_14AA_0160 1
+#define RTL2832U_1ST_ID (RTL2831U_14AA_0160 + 1)
+
+#define RTL2832U_0BDA_2832 (0 + RTL2832U_1ST_ID)
+#define RTL2832U_1D19_1101 (1 + RTL2832U_1ST_ID)
+
+
static struct usb_device_id rtl28xxu_table[] = {
[RTL2831U_0BDA_2831] = {
USB_DEVICE(USB_VID_REALTEK, USB_PID_RTL2831U)},
[RTL2831U_14AA_0160] = {
USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM)},
+
+ [RTL2832U_0BDA_2832] = {
+ USB_DEVICE(USB_VID_REALTEK, USB_PID_RTL2832U)},
+ [RTL2832U_1D19_1101] = {
+ USB_DEVICE(USB_VID_DEXATEK, USB_PID_DEXATEK_1101)},
+
{} /* terminating entry */
};
.num_adapters = 1,
.adapter = {
{
- .frontend_attach = rtl28xxu_frontend_attach,
- .tuner_attach = rtl28xxu_tuner_attach,
+ .frontend_attach = rtl2831u_frontend_attach,
+ .tuner_attach = rtl2831u_tuner_attach,
.streaming_ctrl = rtl28xxu_streaming_ctrl,
.stream = {
.type = USB_BULK,
.rc.core = {
.protocol = RC_TYPE_NEC,
.module_name = "rtl28xxu",
- .rc_query = rtl28xxu_rc_query,
+ .rc_query = rtl2831u_rc_query,
.rc_interval = 400,
.allowed_protos = RC_TYPE_NEC,
.rc_codes = RC_MAP_EMPTY,
},
}
},
+ {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .no_reconnect = 1,
+
+ .size_of_priv = sizeof(struct rtl28xxu_priv),
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .frontend_attach = rtl2832u_frontend_attach,
+ .tuner_attach = rtl2832u_tuner_attach,
+ .streaming_ctrl = rtl28xxu_streaming_ctrl,
+ .stream = {
+ .type = USB_BULK,
+ .count = 6,
+ .endpoint = 0x81,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
+ }
+ },
+
+ .power_ctrl = rtl28xxu_power_ctrl,
+
+ .rc.core = {
+ .protocol = RC_TYPE_NEC,
+ .module_name = "rtl28xxu",
+ .rc_query = rtl2832u_rc_query,
+ .rc_interval = 400,
+ .allowed_protos = RC_TYPE_NEC,
+ .rc_codes = RC_MAP_EMPTY,
+ },
+
+ .i2c_algo = &rtl28xxu_i2c_algo,
+
+ .num_device_descs = 2,
+ .devices = {
+ {
+ .name = "Realtek RTL2832U reference design",
+ .cold_ids = {NULL},
+ .warm_ids = {
+ &rtl28xxu_table[RTL2832U_0BDA_2832], NULL},
+ },
+ {
+ .name = "Dexatek dongle",
+ .cold_ids = {NULL},
+ .warm_ids = {
+ &rtl28xxu_table[RTL2832U_1D19_1101], NULL},
+ },
+ }
+ },
+
};
static int rtl28xxu_probe(struct usb_interface *intf,
int ret, i;
int properties_count = ARRAY_SIZE(rtl28xxu_properties);
struct dvb_usb_device *d = NULL;
- struct rtl28xxu_reg_val rc_nec_tab[] = {
- { 0x3033, 0x80 },
- { 0x3020, 0x43 },
- { 0x3021, 0x16 },
- { 0x3022, 0x16 },
- { 0x3023, 0x5a },
- { 0x3024, 0x2d },
- { 0x3025, 0x16 },
- { 0x3026, 0x01 },
- { 0x3028, 0xb0 },
- { 0x3029, 0x04 },
- { 0x302c, 0x88 },
- { 0x302e, 0x13 },
- { 0x3030, 0xdf },
- { 0x3031, 0x05 },
- };
deb_info("%s: interface=%d\n", __func__,
intf->cur_altsetting->desc.bInterfaceNumber);
if (ret)
goto err;
- /* init remote controller */
- for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) {
- ret = rtl2831_wr_reg(d, rc_nec_tab[i].reg, rc_nec_tab[i].val);
- if (ret)
- goto err;
- }
-
return ret;
err:
deb_info("%s: failed=%d\n", __func__, ret);
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff