--- /dev/null
+/*
+ * LP8755 High Performance Power Management Unit : System Interface Driver
+ * (based on rev. 0.26)
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/platform_data/lp8755.h>
+
+#define LP8755_REG_BUCK0 0x00
+#define LP8755_REG_BUCK1 0x03
+#define LP8755_REG_BUCK2 0x04
+#define LP8755_REG_BUCK3 0x01
+#define LP8755_REG_BUCK4 0x05
+#define LP8755_REG_BUCK5 0x02
+#define LP8755_REG_MAX 0xFF
+
+#define LP8755_BUCK_EN_M BIT(7)
+#define LP8755_BUCK_LINEAR_OUT_MAX 0x76
+#define LP8755_BUCK_VOUT_M 0x7F
+
+enum bucks {
+ BUCK0 = 0,
+ BUCK1,
+ BUCK2,
+ BUCK3,
+ BUCK4,
+ BUCK5,
+};
+
+struct lp8755_mphase {
+ int nreg;
+ int buck_num[LP8755_BUCK_MAX];
+};
+
+struct lp8755_chip {
+ struct device *dev;
+ struct regmap *regmap;
+ struct lp8755_platform_data *pdata;
+
+ int irq;
+ unsigned int irqmask;
+
+ int mphase;
+ struct regulator_dev *rdev[LP8755_BUCK_MAX];
+};
+
+/**
+ *lp8755_read : read a single register value from lp8755.
+ *@pchip : device to read from
+ *@reg : register to read from
+ *@val : pointer to store read value
+ */
+static int lp8755_read(struct lp8755_chip *pchip, unsigned int reg,
+ unsigned int *val)
+{
+ return regmap_read(pchip->regmap, reg, val);
+}
+
+/**
+ *lp8755_write : write a single register value to lp8755.
+ *@pchip : device to write to
+ *@reg : register to write to
+ *@val : value to be written
+ */
+static int lp8755_write(struct lp8755_chip *pchip, unsigned int reg,
+ unsigned int val)
+{
+ return regmap_write(pchip->regmap, reg, val);
+}
+
+/**
+ *lp8755_update_bits : set the values of bit fields in lp8755 register.
+ *@pchip : device to read from
+ *@reg : register to update
+ *@mask : bitmask to be changed
+ *@val : value for bitmask
+ */
+static int lp8755_update_bits(struct lp8755_chip *pchip, unsigned int reg,
+ unsigned int mask, unsigned int val)
+{
+ return regmap_update_bits(pchip->regmap, reg, mask, val);
+}
+
+static int lp8755_buck_enable_time(struct regulator_dev *rdev)
+{
+ int ret;
+ unsigned int regval;
+ enum lp8755_bucks id = rdev_get_id(rdev);
+ struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
+
+ ret = lp8755_read(pchip, 0x12 + id, ®val);
+ if (ret < 0) {
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return ret;
+ }
+ return (regval & 0xff) * 100;
+}
+
+static int lp8755_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ int ret;
+ unsigned int regbval = 0x0;
+ enum lp8755_bucks id = rdev_get_id(rdev);
+ struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ /* forced pwm mode */
+ regbval = (0x01 << id);
+ break;
+ case REGULATOR_MODE_NORMAL:
+ /* enable automatic pwm/pfm mode */
+ ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x00);
+ if (ret < 0)
+ goto err_i2c;
+ break;
+ case REGULATOR_MODE_IDLE:
+ /* enable automatic pwm/pfm/lppfm mode */
+ ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x20);
+ if (ret < 0)
+ goto err_i2c;
+
+ ret = lp8755_update_bits(pchip, 0x10, 0x01, 0x01);
+ if (ret < 0)
+ goto err_i2c;
+ break;
+ default:
+ dev_err(pchip->dev, "Not supported buck mode %s\n", __func__);
+ /* forced pwm mode */
+ regbval = (0x01 << id);
+ }
+
+ ret = lp8755_update_bits(pchip, 0x06, 0x01 << id, regbval);
+ if (ret < 0)
+ goto err_i2c;
+ return ret;
+err_i2c:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return ret;
+}
+
+static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev)
+{
+ int ret;
+ unsigned int regval;
+ enum lp8755_bucks id = rdev_get_id(rdev);
+ struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
+
+ ret = lp8755_read(pchip, 0x06, ®val);
+ if (ret < 0)
+ goto err_i2c;
+
+ /* mode fast means forced pwm mode */
+ if (regval & (0x01 << id))
+ return REGULATOR_MODE_FAST;
+
+ ret = lp8755_read(pchip, 0x08 + id, ®val);
+ if (ret < 0)
+ goto err_i2c;
+
+ /* mode idle means automatic pwm/pfm/lppfm mode */
+ if (regval & 0x20)
+ return REGULATOR_MODE_IDLE;
+
+ /* mode normal means automatic pwm/pfm mode */
+ return REGULATOR_MODE_NORMAL;
+
+err_i2c:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return 0;
+}
+
+static int lp8755_buck_set_ramp(struct regulator_dev *rdev, int ramp)
+{
+ int ret;
+ unsigned int regval = 0x00;
+ enum lp8755_bucks id = rdev_get_id(rdev);
+ struct lp8755_chip *pchip = rdev_get_drvdata(rdev);
+
+ /* uV/us */
+ switch (ramp) {
+ case 0 ... 230:
+ regval = 0x07;
+ break;
+ case 231 ... 470:
+ regval = 0x06;
+ break;
+ case 471 ... 940:
+ regval = 0x05;
+ break;
+ case 941 ... 1900:
+ regval = 0x04;
+ break;
+ case 1901 ... 3800:
+ regval = 0x03;
+ break;
+ case 3801 ... 7500:
+ regval = 0x02;
+ break;
+ case 7501 ... 15000:
+ regval = 0x01;
+ break;
+ case 15001 ... 30000:
+ regval = 0x00;
+ break;
+ default:
+ dev_err(pchip->dev,
+ "Not supported ramp value %d %s\n", ramp, __func__);
+ return -EINVAL;
+ }
+
+ ret = lp8755_update_bits(pchip, 0x07 + id, 0x07, regval);
+ if (ret < 0)
+ goto err_i2c;
+ return ret;
+err_i2c:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return ret;
+}
+
+static struct regulator_ops lp8755_buck_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable_time = lp8755_buck_enable_time,
+ .set_mode = lp8755_buck_set_mode,
+ .get_mode = lp8755_buck_get_mode,
+ .set_ramp_delay = lp8755_buck_set_ramp,
+};
+
+#define lp8755_rail(_id) "lp8755_buck"#_id
+#define lp8755_buck_init(_id)\
+{\
+ .constraints = {\
+ .name = lp8755_rail(_id),\
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,\
+ .min_uV = 500000,\
+ .max_uV = 1675000,\
+ },\
+}
+
+static struct regulator_init_data lp8755_reg_default[LP8755_BUCK_MAX] = {
+ [BUCK0] = lp8755_buck_init(0),
+ [BUCK1] = lp8755_buck_init(1),
+ [BUCK2] = lp8755_buck_init(2),
+ [BUCK3] = lp8755_buck_init(3),
+ [BUCK4] = lp8755_buck_init(4),
+ [BUCK5] = lp8755_buck_init(5),
+};
+
+static const struct lp8755_mphase mphase_buck[MPHASE_CONF_MAX] = {
+ {3, {BUCK0, BUCK3, BUCK5}
+ },
+ {6, {BUCK0, BUCK1, BUCK2, BUCK3, BUCK4, BUCK5}
+ },
+ {5, {BUCK0, BUCK2, BUCK3, BUCK4, BUCK5}
+ },
+ {4, {BUCK0, BUCK3, BUCK4, BUCK5}
+ },
+ {3, {BUCK0, BUCK4, BUCK5}
+ },
+ {2, {BUCK0, BUCK5}
+ },
+ {1, {BUCK0}
+ },
+ {2, {BUCK0, BUCK3}
+ },
+ {4, {BUCK0, BUCK2, BUCK3, BUCK5}
+ },
+};
+
+static int lp8755_init_data(struct lp8755_chip *pchip)
+{
+ unsigned int regval;
+ int ret, icnt, buck_num;
+ struct lp8755_platform_data *pdata = pchip->pdata;
+
+ /* read back muti-phase configuration */
+ ret = lp8755_read(pchip, 0x3D, ®val);
+ if (ret < 0)
+ goto out_i2c_error;
+ pchip->mphase = regval & 0x07;
+
+ /* set default data based on multi-phase config */
+ for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) {
+ buck_num = mphase_buck[pchip->mphase].buck_num[icnt];
+ pdata->buck_data[buck_num] = &lp8755_reg_default[buck_num];
+ }
+ return ret;
+
+out_i2c_error:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return ret;
+}
+
+#define lp8755_buck_desc(_id)\
+{\
+ .name = lp8755_rail(_id),\
+ .id = LP8755_BUCK##_id,\
+ .ops = &lp8755_buck_ops,\
+ .n_voltages = LP8755_BUCK_LINEAR_OUT_MAX+1,\
+ .uV_step = 10000,\
+ .min_uV = 500000,\
+ .type = REGULATOR_VOLTAGE,\
+ .owner = THIS_MODULE,\
+ .enable_reg = LP8755_REG_BUCK##_id,\
+ .enable_mask = LP8755_BUCK_EN_M,\
+ .vsel_reg = LP8755_REG_BUCK##_id,\
+ .vsel_mask = LP8755_BUCK_VOUT_M,\
+}
+
+static struct regulator_desc lp8755_regulators[] = {
+ lp8755_buck_desc(0),
+ lp8755_buck_desc(1),
+ lp8755_buck_desc(2),
+ lp8755_buck_desc(3),
+ lp8755_buck_desc(4),
+ lp8755_buck_desc(5),
+};
+
+static int lp8755_regulator_init(struct lp8755_chip *pchip)
+{
+ int ret, icnt, buck_num;
+ struct lp8755_platform_data *pdata = pchip->pdata;
+ struct regulator_config rconfig = { };
+
+ rconfig.regmap = pchip->regmap;
+ rconfig.dev = pchip->dev;
+ rconfig.driver_data = pchip;
+
+ for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) {
+ buck_num = mphase_buck[pchip->mphase].buck_num[icnt];
+ rconfig.init_data = pdata->buck_data[buck_num];
+ rconfig.of_node = pchip->dev->of_node;
+ pchip->rdev[buck_num] =
+ regulator_register(&lp8755_regulators[buck_num], &rconfig);
+ if (IS_ERR(pchip->rdev[buck_num])) {
+ ret = PTR_ERR(pchip->rdev[buck_num]);
+ dev_err(pchip->dev, "regulator init failed: buck 0\n");
+ goto err_buck;
+ }
+ }
+
+ return 0;
+
+err_buck:
+ for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
+ if (pchip->rdev[icnt] != NULL)
+ regulator_unregister(pchip->rdev[icnt]);
+ return ret;
+}
+
+static irqreturn_t lp8755_irq_handler(int irq, void *data)
+{
+ int ret, icnt;
+ unsigned int flag0, flag1;
+ struct lp8755_chip *pchip = data;
+
+ /* read flag0 register */
+ ret = lp8755_read(pchip, 0x0D, &flag0);
+ if (ret < 0)
+ goto err_i2c;
+ /* clear flag register to pull up int. pin */
+ ret = lp8755_write(pchip, 0x0D, 0x00);
+ if (ret < 0)
+ goto err_i2c;
+
+ /* sent power fault detection event to specific regulator */
+ for (icnt = 0; icnt < 6; icnt++)
+ if ((flag0 & (0x4 << icnt))
+ && (pchip->irqmask & (0x04 << icnt))
+ && (pchip->rdev[icnt] != NULL))
+ regulator_notifier_call_chain(pchip->rdev[icnt],
+ LP8755_EVENT_PWR_FAULT,
+ NULL);
+
+ /* read flag1 register */
+ ret = lp8755_read(pchip, 0x0E, &flag1);
+ if (ret < 0)
+ goto err_i2c;
+ /* clear flag register to pull up int. pin */
+ ret = lp8755_write(pchip, 0x0E, 0x00);
+ if (ret < 0)
+ goto err_i2c;
+
+ /* send OCP event to all regualtor devices */
+ if ((flag1 & 0x01) && (pchip->irqmask & 0x01))
+ for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
+ if (pchip->rdev[icnt] != NULL)
+ regulator_notifier_call_chain(pchip->rdev[icnt],
+ LP8755_EVENT_OCP,
+ NULL);
+
+ /* send OVP event to all regualtor devices */
+ if ((flag1 & 0x02) && (pchip->irqmask & 0x02))
+ for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++)
+ if (pchip->rdev[icnt] != NULL)
+ regulator_notifier_call_chain(pchip->rdev[icnt],
+ LP8755_EVENT_OVP,
+ NULL);
+ return IRQ_HANDLED;
+
+err_i2c:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return IRQ_NONE;
+}
+
+static int lp8755_int_config(struct lp8755_chip *pchip)
+{
+ int ret;
+ unsigned int regval;
+
+ if (pchip->irq == 0) {
+ dev_warn(pchip->dev, "not use interrupt : %s\n", __func__);
+ return 0;
+ }
+
+ ret = lp8755_read(pchip, 0x0F, ®val);
+ if (ret < 0)
+ goto err_i2c;
+ pchip->irqmask = regval;
+ ret = request_threaded_irq(pchip->irq, NULL, lp8755_irq_handler,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "lp8755-irq", pchip);
+ if (ret)
+ return ret;
+
+ return ret;
+
+err_i2c:
+ dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+ return ret;
+}
+
+static const struct regmap_config lp8755_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = LP8755_REG_MAX,
+};
+
+static int lp8755_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret, icnt;
+ struct lp8755_chip *pchip;
+ struct lp8755_platform_data *pdata = client->dev.platform_data;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "i2c functionality check fail.\n");
+ return -EOPNOTSUPP;
+ }
+
+ pchip = devm_kzalloc(&client->dev,
+ sizeof(struct lp8755_chip), GFP_KERNEL);
+ if (!pchip)
+ return -ENOMEM;
+
+ pchip->dev = &client->dev;
+ pchip->regmap = devm_regmap_init_i2c(client, &lp8755_regmap);
+ if (IS_ERR(pchip->regmap)) {
+ ret = PTR_ERR(pchip->regmap);
+ dev_err(&client->dev, "fail to allocate regmap %d\n", ret);
+ return ret;
+ }
+ i2c_set_clientdata(client, pchip);
+
+ if (pdata != NULL) {
+ pchip->pdata = pdata;
+ pchip->mphase = pdata->mphase;
+ } else {
+ pchip->pdata = devm_kzalloc(pchip->dev,
+ sizeof(struct lp8755_platform_data),
+ GFP_KERNEL);
+ if (!pchip->pdata)
+ return -ENOMEM;
+ ret = lp8755_init_data(pchip);
+ if (ret < 0)
+ goto err_chip_init;
+ }
+
+ ret = lp8755_regulator_init(pchip);
+ if (ret < 0)
+ goto err_regulator;
+
+ pchip->irq = client->irq;
+ ret = lp8755_int_config(pchip);
+ if (ret < 0)
+ goto err_irq;
+
+ return ret;
+
+err_irq:
+ dev_err(&client->dev, "fail to irq config\n");
+
+ for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++)
+ regulator_unregister(pchip->rdev[icnt]);
+
+err_regulator:
+ dev_err(&client->dev, "fail to initialize regulators\n");
+ /* output disable */
+ for (icnt = 0; icnt < 0x06; icnt++)
+ lp8755_write(pchip, icnt, 0x00);
+
+err_chip_init:
+ dev_err(&client->dev, "fail to initialize chip\n");
+ return ret;
+}
+
+static int lp8755_remove(struct i2c_client *client)
+{
+ int icnt;
+ struct lp8755_chip *pchip = i2c_get_clientdata(client);
+
+ for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++)
+ regulator_unregister(pchip->rdev[icnt]);
+
+ for (icnt = 0; icnt < 0x06; icnt++)
+ lp8755_write(pchip, icnt, 0x00);
+
+ if (pchip->irq != 0)
+ free_irq(pchip->irq, pchip);
+
+ return 0;
+}
+
+static const struct i2c_device_id lp8755_id[] = {
+ {LP8755_NAME, 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, lp8755_id);
+
+static struct i2c_driver lp8755_i2c_driver = {
+ .driver = {
+ .name = LP8755_NAME,
+ },
+ .probe = lp8755_probe,
+ .remove = __devexit_p(lp8755_remove),
+ .id_table = lp8755_id,
+};
+
+static int __init lp8755_init(void)
+{
+ return i2c_add_driver(&lp8755_i2c_driver);
+}
+
+subsys_initcall(lp8755_init);
+
+static void __exit lp8755_exit(void)
+{
+ i2c_del_driver(&lp8755_i2c_driver);
+}
+
+module_exit(lp8755_exit);
+
+MODULE_DESCRIPTION("Texas Instruments lp8755 driver");
+MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
+MODULE_LICENSE("GPL v2");
projects / profile / ivi / kernel-x86-ivi.git / commitdiff