hwmon: (lm83) Clean up detect function

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index e59e2d1..08b03e6 100644 (file)
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -1,7 +1,7 @@
 /*
  * lm83.c - Part of lm_sensors, Linux kernel modules for hardware
  *          monitoring
- * Copyright (C) 2003-2008  Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2009  Jean Delvare <khali@linux-fr.org>
  *
  * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
  * a sensor chip made by National Semiconductor. It reports up to four
@@ -295,69 +295,40 @@ static int lm83_detect(struct i2c_client *new_client, int kind,
                       struct i2c_board_info *info)
 {
        struct i2c_adapter *adapter = new_client->adapter;
-       const char *name = "";
+       const char *name;
+       u8 man_id, chip_id;
 
        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
                return -ENODEV;
 
-       /* Now we do the detection and identification. A negative kind
-        * means that the driver was loaded with no force parameter
-        * (default), so we must both detect and identify the chip
-        * (actually there is only one possible kind of chip for now, LM83).
-        * A zero kind means that the driver was loaded with the force
-        * parameter, the detection step shall be skipped. A positive kind
-        * means that the driver was loaded with the force parameter and a
-        * given kind of chip is requested, so both the detection and the
-        * identification steps are skipped. */
-
-       /* Default to an LM83 if forced */
-       if (kind == 0)
-               kind = lm83;
-
-       if (kind < 0) { /* detection */
-               if (((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1)
-                   & 0xA8) != 0x00) ||
-                   ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2)
-                   & 0x48) != 0x00) ||
-                   ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG)
-                   & 0x41) != 0x00)) {
-                       dev_dbg(&adapter->dev,
-                               "LM83 detection failed at 0x%02x.\n",
-                               new_client->addr);
-                       return -ENODEV;
-               }
+       /* Detection */
+       if ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1) & 0xA8) ||
+           (i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2) & 0x48) ||
+           (i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG) & 0x41)) {
+               dev_dbg(&adapter->dev, "LM83 detection failed at 0x%02x\n",
+                       new_client->addr);
+               return -ENODEV;
        }
 
-       if (kind <= 0) { /* identification */
-               u8 man_id, chip_id;
-
-               man_id = i2c_smbus_read_byte_data(new_client,
-                   LM83_REG_R_MAN_ID);
-               chip_id = i2c_smbus_read_byte_data(new_client,
-                   LM83_REG_R_CHIP_ID);
-
-               if (man_id == 0x01) { /* National Semiconductor */
-                       if (chip_id == 0x03) {
-                               kind = lm83;
-                       } else
-                       if (chip_id == 0x01) {
-                               kind = lm82;
-                       }
-               }
-
-               if (kind <= 0) { /* identification failed */
-                       dev_info(&adapter->dev,
-                           "Unsupported chip (man_id=0x%02X, "
-                           "chip_id=0x%02X).\n", man_id, chip_id);
-                       return -ENODEV;
-               }
-       }
+       /* Identification */
+       man_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_MAN_ID);
+       if (man_id != 0x01)     /* National Semiconductor */
+               return -ENODEV;
 
-       if (kind == lm83) {
+       chip_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_CHIP_ID);
+       switch (chip_id) {
+       case 0x03:
                name = "lm83";
-       } else
-       if (kind == lm82) {
+               break;
+       case 0x01:
                name = "lm82";
+               break;
+       default:
+               /* identification failed */
+               dev_info(&adapter->dev,
+                        "Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n",
+                        man_id, chip_id);
+               return -ENODEV;
        }
 
        strlcpy(info->type, name, I2C_NAME_SIZE);