module_spi_driver(ad7314_driver);
MODULE_AUTHOR("Sonic Zhang <sonic.zhang@analog.com>");
-MODULE_DESCRIPTION("Analog Devices AD7314, ADT7301 and ADT7302 digital"
- " temperature sensor driver");
+MODULE_DESCRIPTION("Analog Devices AD7314, ADT7301 and ADT7302 digital temperature sensor driver");
MODULE_LICENSE("GPL v2");
int conv_rate, status, config, man_id, dev_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
- pr_debug("adm1021: detect failed, "
- "smbus byte data not supported!\n");
+ pr_debug("detect failed, smbus byte data not supported!\n");
return -ENODEV;
}
/* Check unused bits */
if ((status & 0x03) || (config & 0x3F) || (conv_rate & 0xF8)) {
- pr_debug("adm1021: detect failed, chip not detected!\n");
+ pr_debug("detect failed, chip not detected!\n");
return -ENODEV;
}
else
type_name = "max1617";
- pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n",
+ pr_debug("Detected chip %s at adapter %d, address 0x%02x.\n",
type_name, i2c_adapter_id(adapter), client->addr);
strlcpy(info->type, type_name, I2C_NAME_SIZE);
data = devm_kzalloc(&client->dev, sizeof(struct adm1021_data),
GFP_KERNEL);
- if (!data) {
- pr_debug("adm1021: detect failed, devm_kzalloc failed!\n");
+ if (!data)
return -ENOMEM;
- }
i2c_set_clientdata(client, data);
data->type = id->driver_data;
module_param_array(gpio_input, int, NULL, 0);
MODULE_PARM_DESC(gpio_input, "List of GPIO pins (0-16) to program as inputs");
module_param_array(gpio_output, int, NULL, 0);
-MODULE_PARM_DESC(gpio_output, "List of GPIO pins (0-16) to program as "
- "outputs");
+MODULE_PARM_DESC(gpio_output,
+ "List of GPIO pins (0-16) to program as outputs");
module_param_array(gpio_inverted, int, NULL, 0);
-MODULE_PARM_DESC(gpio_inverted, "List of GPIO pins (0-16) to program as "
- "inverted");
+MODULE_PARM_DESC(gpio_inverted,
+ "List of GPIO pins (0-16) to program as inverted");
module_param_array(gpio_normal, int, NULL, 0);
-MODULE_PARM_DESC(gpio_normal, "List of GPIO pins (0-16) to program as "
- "normal/non-inverted");
+MODULE_PARM_DESC(gpio_normal,
+ "List of GPIO pins (0-16) to program as normal/non-inverted");
module_param_array(gpio_fan, int, NULL, 0);
MODULE_PARM_DESC(gpio_fan, "List of GPIO pins (0-7) to program as fan tachs");
dev_dbg(&client->dev, "ADM1026_REG_CONFIG1 is: 0x%02x\n",
data->config1);
if ((data->config1 & CFG1_MONITOR) == 0) {
- dev_dbg(&client->dev, "Monitoring not currently "
- "enabled.\n");
+ dev_dbg(&client->dev,
+ "Monitoring not currently enabled.\n");
}
if (data->config1 & CFG1_INT_ENABLE) {
- dev_dbg(&client->dev, "SMBALERT interrupts are "
- "enabled.\n");
+ dev_dbg(&client->dev,
+ "SMBALERT interrupts are enabled.\n");
}
if (data->config1 & CFG1_AIN8_9) {
- dev_dbg(&client->dev, "in8 and in9 enabled. "
- "temp3 disabled.\n");
+ dev_dbg(&client->dev,
+ "in8 and in9 enabled. temp3 disabled.\n");
} else {
- dev_dbg(&client->dev, "temp3 enabled. in8 and "
- "in9 disabled.\n");
+ dev_dbg(&client->dev,
+ "temp3 enabled. in8 and in9 disabled.\n");
}
if (data->config1 & CFG1_THERM_HOT) {
- dev_dbg(&client->dev, "Automatic THERM, PWM, "
- "and temp limits enabled.\n");
+ dev_dbg(&client->dev,
+ "Automatic THERM, PWM, and temp limits enabled.\n");
}
if (data->config3 & CFG3_GPIO16_ENABLE) {
- dev_dbg(&client->dev, "GPIO16 enabled. THERM "
- "pin disabled.\n");
+ dev_dbg(&client->dev,
+ "GPIO16 enabled. THERM pin disabled.\n");
} else {
- dev_dbg(&client->dev, "THERM pin enabled. "
- "GPIO16 disabled.\n");
+ dev_dbg(&client->dev,
+ "THERM pin enabled. GPIO16 disabled.\n");
}
if (data->config3 & CFG3_VREF_250)
dev_dbg(&client->dev, "Vref is 2.50 Volts.\n");
company = adm1026_read_value(client, ADM1026_REG_COMPANY);
verstep = adm1026_read_value(client, ADM1026_REG_VERSTEP);
- dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with"
- " COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
+ dev_dbg(&adapter->dev,
+ "Detecting device at %d,0x%02x with COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
i2c_adapter_id(client->adapter), client->addr,
company, verstep);
/* Analog Devices ADM1026 */
} else if (company == ADM1026_COMPANY_ANALOG_DEV
&& (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
- dev_err(&adapter->dev, "Unrecognized stepping "
- "0x%02x. Defaulting to ADM1026.\n", verstep);
+ dev_err(&adapter->dev,
+ "Unrecognized stepping 0x%02x. Defaulting to ADM1026.\n",
+ verstep);
} else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
- dev_err(&adapter->dev, "Found version/stepping "
- "0x%02x. Assuming generic ADM1026.\n",
+ dev_err(&adapter->dev,
+ "Found version/stepping 0x%02x. Assuming generic ADM1026.\n",
verstep);
} else {
dev_dbg(&adapter->dev, "Autodetection failed\n");
break;
default:
mutex_unlock(&data->update_lock);
- dev_err(&client->dev, "fan_div value %ld not "
- "supported. Choose one of 1, 2 or 4!\n", val);
+ dev_err(&client->dev,
+ "fan_div value %ld not supported. Choose one of 1, 2 or 4!\n",
+ val);
return -EINVAL;
}
/* Update the value */
* There are no "official" CHIP ID, so actually
* we use Major/Minor revision for that
*/
- pr_info("adm1029: Unknown major revision %x, "
- "please let us know\n", chip_id);
+ pr_info("Unknown major revision %x, please let us know\n",
+ chip_id);
return -ENODEV;
}
reg &= ~(3 << shift);
reg |= (fan_div << shift);
i2c_smbus_write_byte_data(client, ADM9240_REG_VID_FAN_DIV, reg);
- dev_dbg(&client->dev, "fan%d clock divider changed from %u "
- "to %u\n", nr + 1, 1 << old, 1 << fan_div);
+ dev_dbg(&client->dev,
+ "fan%d clock divider changed from %u to %u\n",
+ nr + 1, 1 << old, 1 << fan_div);
}
/*
/* start measurement cycle */
i2c_smbus_write_byte_data(client, ADM9240_REG_CONFIG, 1);
- dev_info(&client->dev, "cold start: config was 0x%02x "
- "mode %u\n", conf, mode);
+ dev_info(&client->dev,
+ "cold start: config was 0x%02x mode %u\n", conf, mode);
}
}
val = i2c_smbus_read_byte_data(client, ADT7411_REG_MANUFACTURER_ID);
if (val < 0 || val != ADT7411_MANUFACTURER_ID) {
- dev_dbg(&client->dev, "Wrong manufacturer ID. Got %d, "
- "expected %d\n", val, ADT7411_MANUFACTURER_ID);
+ dev_dbg(&client->dev,
+ "Wrong manufacturer ID. Got %d, expected %d\n",
+ val, ADT7411_MANUFACTURER_ID);
return -ENODEV;
}
val = i2c_smbus_read_byte_data(client, ADT7411_REG_DEVICE_ID);
if (val < 0 || val != ADT7411_DEVICE_ID) {
- dev_dbg(&client->dev, "Wrong device ID. Got %d, "
- "expected %d\n", val, ADT7411_DEVICE_ID);
+ dev_dbg(&client->dev,
+ "Wrong device ID. Got %d, expected %d\n",
+ val, ADT7411_DEVICE_ID);
return -ENODEV;
}
static unsigned short force_subclients[4];
module_param_array(force_subclients, short, NULL, 0);
-MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
- "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+MODULE_PARM_DESC(force_subclients,
+ "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}");
/* Voltage IN registers 0-6 */
#define ASB100_REG_IN(nr) (0x20 + (nr))
for (i = 2; i <= 3; i++) {
if (force_subclients[i] < 0x48 ||
force_subclients[i] > 0x4f) {
- dev_err(&client->dev, "invalid subclient "
- "address %d; must be 0x48-0x4f\n",
+ dev_err(&client->dev,
+ "invalid subclient address %d; must be 0x48-0x4f\n",
force_subclients[i]);
err = -ENODEV;
goto ERROR_SC_2;
}
if (sc_addr[0] == sc_addr[1]) {
- dev_err(&client->dev, "duplicate addresses 0x%x "
- "for subclients\n", sc_addr[0]);
+ dev_err(&client->dev,
+ "duplicate addresses 0x%x for subclients\n",
+ sc_addr[0]);
err = -ENODEV;
goto ERROR_SC_2;
}
data->lm75[0] = i2c_new_dummy(adapter, sc_addr[0]);
if (!data->lm75[0]) {
- dev_err(&client->dev, "subclient %d registration "
- "at address 0x%x failed.\n", 1, sc_addr[0]);
+ dev_err(&client->dev,
+ "subclient %d registration at address 0x%x failed.\n",
+ 1, sc_addr[0]);
err = -ENOMEM;
goto ERROR_SC_2;
}
data->lm75[1] = i2c_new_dummy(adapter, sc_addr[1]);
if (!data->lm75[1]) {
- dev_err(&client->dev, "subclient %d registration "
- "at address 0x%x failed.\n", 2, sc_addr[1]);
+ dev_err(&client->dev,
+ "subclient %d registration at address 0x%x failed.\n",
+ 2, sc_addr[1]);
err = -ENOMEM;
goto ERROR_SC_3;
}
* fixed for stepping D0 (6EC).
*/
if (c->x86_model == 0xe && c->x86_mask < 0xc && c->microcode < 0x39) {
- pr_err("Errata AE18 not fixed, update BIOS or "
- "microcode of the CPU!\n");
+ pr_err("Errata AE18 not fixed, update BIOS or microcode of the CPU!\n");
return -ENODEV;
}
return 0;
static bool probe_all_addr;
module_param(probe_all_addr, bool, 0);
-MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC "
- "addresses");
+MODULE_PARM_DESC(probe_all_addr,
+ "Include probing of non-standard LPC addresses");
/* Addresses to scan */
static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END};
enum chips { dme1737, sch5027, sch311x, sch5127 };
+#define DO_REPORT "Please report to the driver maintainer."
+
/* ---------------------------------------------------------------------
* Registers
*
val = i2c_smbus_read_byte_data(client, reg);
if (val < 0) {
- dev_warn(&client->dev, "Read from register "
- "0x%02x failed! Please report to the driver "
- "maintainer.\n", reg);
+ dev_warn(&client->dev,
+ "Read from register 0x%02x failed! %s\n",
+ reg, DO_REPORT);
}
} else { /* ISA device */
outb(reg, data->addr);
res = i2c_smbus_write_byte_data(client, reg, val);
if (res < 0) {
- dev_warn(&client->dev, "Write to register "
- "0x%02x failed! Please report to the driver "
- "maintainer.\n", reg);
+ dev_warn(&client->dev,
+ "Write to register 0x%02x failed! %s\n",
+ reg, DO_REPORT);
}
} else { /* ISA device */
outb(reg, data->addr);
/* Only valid for fan[1-4] */
if (!(val == 1 || val == 2 || val == 4)) {
count = -EINVAL;
- dev_warn(dev, "Fan type value %ld not "
- "supported. Choose one of 1, 2, or 4.\n",
+ dev_warn(dev,
+ "Fan type value %ld not supported. Choose one of 1, 2, or 4.\n",
val);
goto exit;
}
/* Only valid for pwm[1-3] */
if (val < 0 || val > 2) {
count = -EINVAL;
- dev_warn(dev, "PWM enable %ld not "
- "supported. Choose one of 0, 1, or 2.\n",
+ dev_warn(dev,
+ "PWM enable %ld not supported. Choose one of 0, 1, or 2.\n",
val);
goto exit;
}
if (!(val == 1 || val == 2 || val == 4 ||
val == 6 || val == 7)) {
count = -EINVAL;
- dev_warn(dev, "PWM auto channels zone %ld "
- "not supported. Choose one of 1, 2, 4, 6, "
+ dev_warn(dev,
+ "PWM auto channels zone %ld not supported. Choose one of 1, 2, 4, 6, "
"or 7.\n", val);
goto exit;
}
* selected attributes from read-only to read-writeable.
*/
if (data->config & 0x02) {
- dev_info(dev, "Device is locked. Some attributes "
- "will be read-only.\n");
+ dev_info(dev,
+ "Device is locked. Some attributes will be read-only.\n");
} else {
/* Change permissions of zone sysfs attributes */
dme1737_chmod_group(dev, &dme1737_zone_chmod_group,
/* Inform if part is not monitoring/started */
if (!(data->config & 0x01)) {
if (!force_start) {
- dev_err(dev, "Device is not monitoring. "
- "Use the force_start load parameter to "
- "override.\n");
+ dev_err(dev,
+ "Device is not monitoring. Use the force_start load parameter to override.\n");
return -EFAULT;
}
*/
if (dme1737_i2c_get_features(0x2e, data) &&
dme1737_i2c_get_features(0x4e, data)) {
- dev_warn(dev, "Failed to query Super-IO for optional "
- "features.\n");
+ dev_warn(dev,
+ "Failed to query Super-IO for optional features.\n");
}
}
break;
}
- dev_info(dev, "Optional features: pwm3=%s, pwm5=%s, pwm6=%s, "
- "fan3=%s, fan4=%s, fan5=%s, fan6=%s.\n",
+ dev_info(dev,
+ "Optional features: pwm3=%s, pwm5=%s, pwm6=%s, fan3=%s, fan4=%s, fan5=%s, fan6=%s.\n",
(data->has_features & HAS_PWM(2)) ? "yes" : "no",
(data->has_features & HAS_PWM(4)) ? "yes" : "no",
(data->has_features & HAS_PWM(5)) ? "yes" : "no",
reg = dme1737_read(data, DME1737_REG_TACH_PWM);
/* Inform if fan-to-pwm mapping differs from the default */
if (client && reg != 0xa4) { /* I2C chip */
- dev_warn(dev, "Non-standard fan to pwm mapping: "
- "fan1->pwm%d, fan2->pwm%d, fan3->pwm%d, "
- "fan4->pwm%d. Please report to the driver "
- "maintainer.\n",
+ dev_warn(dev,
+ "Non-standard fan to pwm mapping: fan1->pwm%d, fan2->pwm%d, fan3->pwm%d, fan4->pwm%d. %s\n",
(reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1,
- ((reg >> 4) & 0x03) + 1, ((reg >> 6) & 0x03) + 1);
+ ((reg >> 4) & 0x03) + 1, ((reg >> 6) & 0x03) + 1,
+ DO_REPORT);
} else if (!client && reg != 0x24) { /* ISA chip */
- dev_warn(dev, "Non-standard fan to pwm mapping: "
- "fan1->pwm%d, fan2->pwm%d, fan3->pwm%d. "
- "Please report to the driver maintainer.\n",
+ dev_warn(dev,
+ "Non-standard fan to pwm mapping: fan1->pwm%d, fan2->pwm%d, fan3->pwm%d. %s\n",
(reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1,
- ((reg >> 4) & 0x03) + 1);
+ ((reg >> 4) & 0x03) + 1, DO_REPORT);
}
/*
DME1737_REG_PWM_CONFIG(ix));
if ((data->has_features & HAS_PWM(ix)) &&
(PWM_EN_FROM_REG(data->pwm_config[ix]) == -1)) {
- dev_info(dev, "Switching pwm%d to "
- "manual mode.\n", ix + 1);
+ dev_info(dev,
+ "Switching pwm%d to manual mode.\n",
+ ix + 1);
data->pwm_config[ix] = PWM_EN_TO_REG(1,
data->pwm_config[ix]);
dme1737_write(data, DME1737_REG_PWM(ix), 0);
/* result not allowed to be >= 256W */
if ((tmp >> 16) >= 256)
- dev_warn(&f4->dev, "Bogus value for ProcessorPwrWatts "
- "(processor_pwr_watts>=%u)\n",
+ dev_warn(&f4->dev,
+ "Bogus value for ProcessorPwrWatts (processor_pwr_watts>=%u)\n",
(unsigned int) (tmp >> 16));
/* convert to microWatt */
v = 3;
break;
default:
- dev_err(dev, "fan_div value %lu not supported. "
- "Choose one of 2, 4 or 8!\n", v);
+ dev_err(dev,
+ "fan_div value %lu not supported. Choose one of 2, 4 or 8!\n",
+ v);
return -EINVAL;
}
}
if (i == ARRAY_SIZE(watchdog_minors)) {
data->watchdog_miscdev.minor = 0;
- dev_warn(&client->dev, "Couldn't register watchdog chardev "
- "(due to no free minor)\n");
+ dev_warn(&client->dev,
+ "Couldn't register watchdog chardev (due to no free minor)\n");
}
mutex_unlock(&watchdog_data_mutex);
val = 3;
break;
default:
- dev_err(dev, "Invalid fan clock divider %lu, choose one "
- "of 1, 2, 4 or 8\n", val);
+ dev_err(dev,
+ "Invalid fan clock divider %lu, choose one of 1, 2, 4 or 8\n",
+ val);
return -EINVAL;
}
err = ipmi_create_user(data->interface, &driver_data.ipmi_hndlrs,
data, &data->user);
if (err < 0) {
- dev_err(bmc, "Unable to register user with IPMI "
- "interface %d\n", data->interface);
+ dev_err(bmc,
+ "Unable to register user with IPMI interface %d\n",
+ data->interface);
return -EACCES;
}
struct aem_ipmi_data *data = user_msg_data;
if (msg->msgid != data->tx_msgid) {
- dev_err(data->bmc_device, "Mismatch between received msgid "
- "(%02x) and transmitted msgid (%02x)!\n",
+ dev_err(data->bmc_device,
+ "Mismatch between received msgid (%02x) and transmitted msgid (%02x)!\n",
(int)msg->msgid,
(int)data->tx_msgid);
ipmi_free_recv_msg(msg);
/* Register with hwmon */
data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
if (IS_ERR(data->hwmon_dev)) {
- dev_err(&data->pdev->dev, "Unable to register hwmon "
- "device for IPMI interface %d\n",
+ dev_err(&data->pdev->dev,
+ "Unable to register hwmon device for IPMI interface %d\n",
probe->interface);
res = PTR_ERR(data->hwmon_dev);
goto hwmon_reg_err;
/* Register with hwmon */
data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
if (IS_ERR(data->hwmon_dev)) {
- dev_err(&data->pdev->dev, "Unable to register hwmon "
- "device for IPMI interface %d\n",
+ dev_err(&data->pdev->dev,
+ "Unable to register hwmon device for IPMI interface %d\n",
probe->interface);
res = PTR_ERR(data->hwmon_dev);
goto hwmon_reg_err;
while (!aem_find_aem2(probe, &fi_resp, i)) {
if (fi_resp.major != 2) {
- dev_err(probe->bmc_device, "Unknown AEM v%d; please "
- "report this to the maintainer.\n",
+ dev_err(probe->bmc_device,
+ "Unknown AEM v%d; please report this to the maintainer.\n",
fi_resp.major);
i++;
continue;
data->sensor_major = data->rx_msg_data[0];
data->sensor_minor = data->rx_msg_data[1];
- dev_info(data->bmc_device, "Found BMC with sensor interface "
- "v%d.%d %d-%02d-%02d on interface %d\n",
+ dev_info(data->bmc_device,
+ "Found BMC with sensor interface v%d.%d %d-%02d-%02d on interface %d\n",
data->sensor_major,
data->sensor_minor,
extract_value(data->rx_msg_data, 2),
err = ipmi_create_user(data->interface, &driver_data.ipmi_hndlrs,
data, &data->user);
if (err < 0) {
- dev_err(dev, "Unable to register user with IPMI "
- "interface %d\n", data->interface);
+ dev_err(dev,
+ "Unable to register user with IPMI interface %d\n",
+ data->interface);
goto out;
}
data->hwmon_dev = hwmon_device_register(data->bmc_device);
if (IS_ERR(data->hwmon_dev)) {
- dev_err(data->bmc_device, "Unable to register hwmon "
- "device for IPMI interface %d\n",
+ dev_err(data->bmc_device,
+ "Unable to register hwmon device for IPMI interface %d\n",
data->interface);
goto out_user;
}
struct ibmpex_bmc_data *data = (struct ibmpex_bmc_data *)user_msg_data;
if (msg->msgid != data->tx_msgid) {
- dev_err(data->bmc_device, "Mismatch between received msgid "
- "(%02x) and transmitted msgid (%02x)!\n",
+ dev_err(data->bmc_device,
+ "Mismatch between received msgid (%02x) and transmitted msgid (%02x)!\n",
(int)msg->msgid,
(int)data->tx_msgid);
ipmi_free_recv_msg(msg);
*/
if (model >= 0x40) {
data->swap_core_select = 1;
- dev_warn(&pdev->dev, "Temperature readouts might be wrong - "
- "check erratum #141\n");
+ dev_warn(&pdev->dev,
+ "Temperature readouts might be wrong - check erratum #141\n");
}
/*
data->fan_div[nr] = 3;
break;
default:
- dev_err(dev, "fan_div value %ld not "
- "supported. Choose one of 1, 2, 4 or 8!\n", val);
+ dev_err(dev,
+ "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n",
+ val);
mutex_unlock(&data->update_lock);
return -EINVAL;
}
goto err_nodev;
if (lm78_alias_detect(client, i)) {
- dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
- "be the same as ISA device\n", address);
+ dev_dbg(&adapter->dev,
+ "Device at 0x%02x appears to be the same as ISA device\n",
+ address);
goto err_nodev;
}
data->fan_div[nr] = 3;
break;
default:
- dev_err(&client->dev, "fan_div value %ld not "
- "supported. Choose one of 1, 2, 4 or 8!\n", val);
+ dev_err(&client->dev,
+ "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n",
+ val);
mutex_unlock(&data->update_lock);
return -EINVAL;
}
company = lm85_read_value(client, LM85_REG_COMPANY);
verstep = lm85_read_value(client, LM85_REG_VERSTEP);
- dev_dbg(&adapter->dev, "Detecting device at 0x%02x with "
- "COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
+ dev_dbg(&adapter->dev,
+ "Detecting device at 0x%02x with COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
address, company, verstep);
/* All supported chips have the version in common */
if (value >= 0) {
return value;
} else {
- dev_warn(&client->dev, "lm93: read byte data failed, "
- "address 0x%02x.\n", reg);
+ dev_warn(&client->dev,
+ "lm93: read byte data failed, address 0x%02x.\n",
+ reg);
mdelay(i + 3);
}
result = i2c_smbus_write_byte_data(client, reg, value);
if (result < 0)
- dev_warn(&client->dev, "lm93: write byte data failed, "
- "0x%02x at address 0x%02x.\n", value, reg);
+ dev_warn(&client->dev,
+ "lm93: write byte data failed, 0x%02x at address 0x%02x.\n",
+ value, reg);
return result;
}
if (value >= 0) {
return value;
} else {
- dev_warn(&client->dev, "lm93: read word data failed, "
- "address 0x%02x.\n", reg);
+ dev_warn(&client->dev,
+ "lm93: read word data failed, address 0x%02x.\n",
+ reg);
mdelay(i + 3);
}
result = i2c_smbus_write_word_data(client, reg, value);
if (result < 0)
- dev_warn(&client->dev, "lm93: write word data failed, "
- "0x%04x at address 0x%02x.\n", value, reg);
+ dev_warn(&client->dev,
+ "lm93: write word data failed, 0x%04x at address 0x%02x.\n",
+ value, reg);
return result;
}
if (result == lm93_block_read_cmds[fbn].len) {
break;
} else {
- dev_warn(&client->dev, "lm93: block read data failed, "
- "command 0x%02x.\n",
+ dev_warn(&client->dev,
+ "lm93: block read data failed, command 0x%02x.\n",
lm93_block_read_cmds[fbn].cmd);
mdelay(i + 3);
}
return;
}
- dev_warn(&client->dev, "timed out waiting for sensor "
- "chip to signal ready!\n");
+ dev_warn(&client->dev,
+ "timed out waiting for sensor chip to signal ready!\n");
}
/* Return 0 if detection is successful, -ENODEV otherwise */
dev_dbg(&client->dev, "using SMBus block data transactions\n");
update = lm93_update_client_full;
} else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) {
- dev_dbg(&client->dev, "disabled SMBus block data "
- "transactions\n");
+ dev_dbg(&client->dev,
+ "disabled SMBus block data transactions\n");
update = lm93_update_client_min;
} else {
- dev_dbg(&client->dev, "detect failed, "
- "smbus byte and/or word data not supported!\n");
+ dev_dbg(&client->dev,
+ "detect failed, smbus byte and/or word data not supported!\n");
return -ENODEV;
}
confreg[3] = superio_inb(sioaddr, 0x25);
if (confreg[2] & 0x40) {
- pr_info("Using thermistors for "
- "temperature monitoring\n");
+ pr_info("Using thermistors for temperature monitoring\n");
}
if (confreg[3] & 0xE0) {
pr_info("VID inputs routed (mode %u)\n",
if (data->address[i]
&& !devm_request_region(dev, extra_isa[i], PC87360_EXTENT,
pc87360_driver.driver.name)) {
- dev_err(dev, "Region 0x%x-0x%x already "
- "in use!\n", extra_isa[i],
- extra_isa[i]+PC87360_EXTENT-1);
+ dev_err(dev,
+ "Region 0x%x-0x%x already in use!\n",
+ extra_isa[i], extra_isa[i]+PC87360_EXTENT-1);
return -EBUSY;
}
}
if (init >= 2 && data->innr) {
reg = pc87360_read_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONVRATE);
- dev_info(&pdev->dev, "VLM conversion set to "
- "1s period, 160us delay\n");
+ dev_info(&pdev->dev,
+ "VLM conversion set to 1s period, 160us delay\n");
pc87360_write_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONVRATE,
(reg & 0xC0) | 0x11);
if (init >= init_in[i]) {
/* Forcibly enable voltage channel */
if (!(reg & CHAN_ENA)) {
- dev_dbg(&pdev->dev, "Forcibly "
- "enabling in%d\n", i);
+ dev_dbg(&pdev->dev, "Forcibly enabling in%d\n",
+ i);
pc87360_write_value(data, LD_IN, i,
PC87365_REG_IN_STATUS,
(reg & 0x68) | 0x87);
data->fan_status[nr] += 0x20;
data->fan_min[nr] >>= 1;
data->fan[nr] >>= 1;
- dev_dbg(dev, "Increasing "
- "clock divider to %d for fan %d\n",
+ dev_dbg(dev,
+ "Increasing clock divider to %d for fan %d\n",
FAN_DIV_FROM_REG(data->fan_status[nr]), nr + 1);
}
} else {
data->fan_status[nr] -= 0x20;
data->fan_min[nr] <<= 1;
data->fan[nr] <<= 1;
- dev_dbg(dev, "Decreasing "
- "clock divider to %d for fan %d\n",
+ dev_dbg(dev,
+ "Decreasing clock divider to %d for fan %d\n",
FAN_DIV_FROM_REG(data->fan_status[nr]),
nr + 1);
}
pc87427_readall_pwm(data, nr);
mode = data->pwm_enable[nr] & PWM_ENABLE_MODE_MASK;
if (mode != PWM_MODE_MANUAL && mode != PWM_MODE_OFF) {
- dev_notice(dev, "Can't set PWM%d duty cycle while not in "
- "manual mode\n", nr + 1);
+ dev_notice(dev,
+ "Can't set PWM%d duty cycle while not in manual mode\n",
+ nr + 1);
mutex_unlock(&data->lock);
return -EPERM;
}
val = superio_inb(sioaddr, SIOREG_MAP);
if (val & 0x01) {
- pr_warn("Logical device 0x%02x is memory-mapped, "
- "can't use\n", logdev[i]);
+ pr_warn("Logical device 0x%02x is memory-mapped, can't use\n",
+ logdev[i]);
continue;
}
val = (superio_inb(sioaddr, SIOREG_IOBASE) << 8)
| superio_inb(sioaddr, SIOREG_IOBASE + 1);
if (!val) {
- pr_info("I/O base address not set for logical device "
- "0x%02x\n", logdev[i]);
+ pr_info("I/O base address not set for logical device 0x%02x\n",
+ logdev[i]);
continue;
}
sio_data->address[i] = val;
break;
}
if (i == max_busy_polls + max_lazy_polls) {
- pr_err("Max retries exceeded reading virtual "
- "register 0x%04hx (%d)\n", reg, 1);
+ pr_err("Max retries exceeded reading virtual register 0x%04hx (%d)\n",
+ reg, 1);
return -EIO;
}
break;
if (i == 0)
- pr_warn("EC reports: 0x%02x reading virtual register "
- "0x%04hx\n", (unsigned int)val, reg);
+ pr_warn("EC reports: 0x%02x reading virtual register 0x%04hx\n",
+ (unsigned int)val, reg);
}
if (i == max_busy_polls) {
- pr_err("Max retries exceeded reading virtual "
- "register 0x%04hx (%d)\n", reg, 2);
+ pr_err("Max retries exceeded reading virtual register 0x%04hx (%d)\n",
+ reg, 2);
return -EIO;
}
data->fan_div[nr] = 3;
break;
default:
- dev_err(dev, "fan_div value %ld not "
- "supported. Choose one of 1, 2, 4 or 8!\n", val);
+ dev_err(dev,
+ "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n",
+ val);
mutex_unlock(&data->update_lock);
return -EINVAL;
}
static unsigned short adm1022_temp3[16];
static unsigned int adm1022_temp3_num;
module_param_array(adm1022_temp3, ushort, &adm1022_temp3_num, 0);
-MODULE_PARM_DESC(adm1022_temp3, "List of adapter,address pairs "
- "to enable 3rd temperature (ADM1022 only)");
+MODULE_PARM_DESC(adm1022_temp3,
+ "List of adapter,address pairs to enable 3rd temperature (ADM1022 only)");
/* Many THMC50 constants specified below */
const char *type_name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
- pr_debug("thmc50: detect failed, "
- "smbus byte data not supported!\n");
+ pr_debug("thmc50: detect failed, smbus byte data not supported!\n");
return -ENODEV;
}
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_WORD_DATA)) {
- dev_err(&client->dev, "adapter doesn't support SMBus word "
- "transactions\n");
+ dev_err(&client->dev,
+ "adapter doesn't support SMBus word transactions\n");
return -ENODEV;
}
return -EINVAL;
if (val != 1) {
- dev_err(dev, "temp_reset_history value %ld not"
- " supported. Use 1 to reset the history!\n", val);
+ dev_err(dev,
+ "temp_reset_history value %ld not supported. Use 1 to reset the history!\n",
+ val);
return -EINVAL;
}
i2c_smbus_write_byte_data(to_i2c_client(dev),
/* Start conversions (disable shutdown if necessary) */
config = i2c_smbus_read_byte_data(client, TMP421_CONFIG_REG_1);
if (config < 0) {
- dev_err(&client->dev, "Could not read configuration"
- " register (%d)\n", config);
+ dev_err(&client->dev,
+ "Could not read configuration register (%d)\n", config);
return -ENODEV;
}
module_i2c_driver(tmp421_driver);
MODULE_AUTHOR("Andre Prendel <andre.prendel@gmx.de>");
-MODULE_DESCRIPTION("Texas Instruments TMP421/422/423 temperature sensor"
- " driver");
+MODULE_DESCRIPTION("Texas Instruments TMP421/422/423 temperature sensor driver");
MODULE_LICENSE("GPL");
address = val & ~(VIA686A_EXTENT - 1);
if (address == 0) {
- dev_err(&dev->dev, "base address not set - upgrade BIOS "
- "or use force_addr=0xaddr\n");
+ dev_err(&dev->dev,
+ "base address not set - upgrade BIOS or use force_addr=0xaddr\n");
return -ENODEV;
}
return -ENODEV;
if (!(val & 0x0001)) {
if (!force_addr) {
- dev_warn(&dev->dev, "Sensors disabled, enable "
- "with force_addr=0x%x\n", address);
+ dev_warn(&dev->dev,
+ "Sensors disabled, enable with force_addr=0x%x\n",
+ address);
return -ENODEV;
}
break;
default:
count = -EINVAL;
- dev_warn(dev, "fan div value %ld not supported. "
- "Choose one of 1, 2, 4, or 8.\n", val);
+ dev_warn(dev,
+ "fan div value %ld not supported. Choose one of 1, 2, 4, or 8.\n",
+ val);
goto EXIT;
}
vt1211_write8(data, VT1211_REG_FAN_DIV,
break;
default:
count = -EINVAL;
- dev_warn(dev, "pwm mode %ld not supported. "
- "Choose one of 0 or 2.\n", val);
+ dev_warn(dev,
+ "pwm mode %ld not supported. Choose one of 0 or 2.\n",
+ val);
goto EXIT;
}
vt1211_write8(data, VT1211_REG_PWM_CTL,
case SHOW_SET_PWM_AUTO_CHANNELS_TEMP:
if (val < 1 || val > 7) {
count = -EINVAL;
- dev_warn(dev, "temp channel %ld not supported. "
- "Choose a value between 1 and 7.\n", val);
+ dev_warn(dev,
+ "temp channel %ld not supported. Choose a value between 1 and 7.\n",
+ val);
goto EXIT;
}
if (!ISTEMP(val - 1, data->uch_config)) {
if ((uch_config < -1) || (uch_config > 31)) {
err = -EINVAL;
- pr_warn("Invalid UCH configuration %d. "
- "Choose a value between 0 and 31.\n", uch_config);
+ pr_warn("Invalid UCH configuration %d. Choose a value between 0 and 31.\n",
+ uch_config);
goto EXIT;
}
if ((int_mode < -1) || (int_mode > 0)) {
err = -EINVAL;
- pr_warn("Invalid interrupt mode %d. "
- "Only mode 0 is supported.\n", int_mode);
+ pr_warn("Invalid interrupt mode %d. Only mode 0 is supported.\n",
+ int_mode);
goto EXIT;
}
data->fan_div[nr] = 3;
break;
default:
- dev_err(dev, "fan_div value %ld not supported. "
- "Choose one of 1, 2, 4 or 8!\n", val);
+ dev_err(dev,
+ "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n",
+ val);
mutex_unlock(&data->update_lock);
return -EINVAL;
}
&& (reg >= 0xff || (sio_data->kind == nct6775
&& reg == 0x00))
&& data->fan_div[i] < 0x07) {
- dev_dbg(dev, "Increasing fan%d "
- "clock divider from %u to %u\n",
+ dev_dbg(dev,
+ "Increasing fan%d clock divider from %u to %u\n",
i + 1, div_from_reg(data->fan_div[i]),
div_from_reg(data->fan_div[i] + 1));
data->fan_div[i]++;
*/
data->fan_min[nr] = 254;
new_div = 7; /* 128 == (1 << 7) */
- dev_warn(dev, "fan%u low limit %lu below minimum %u, set to "
- "minimum\n", nr + 1, val,
- data->fan_from_reg_min(254, 7));
+ dev_warn(dev,
+ "fan%u low limit %lu below minimum %u, set to minimum\n",
+ nr + 1, val, data->fan_from_reg_min(254, 7));
} else if (!reg) {
/*
* Speed above this value cannot possibly be represented,
*/
data->fan_min[nr] = 1;
new_div = 0; /* 1 == (1 << 0) */
- dev_warn(dev, "fan%u low limit %lu above maximum %u, set to "
- "maximum\n", nr + 1, val,
- data->fan_from_reg_min(1, 0));
+ dev_warn(dev,
+ "fan%u low limit %lu above maximum %u, set to maximum\n",
+ nr + 1, val, data->fan_from_reg_min(1, 0));
} else {
/*
* Automatically pick the best divider, i.e. the one such
en_vrm10 = superio_inb(sio_data->sioreg,
SIO_REG_EN_VRM10);
if ((en_vrm10 & 0x08) && data->vrm == 90) {
- dev_warn(dev, "Setting VID input "
- "voltage to TTL\n");
+ dev_warn(dev,
+ "Setting VID input voltage to TTL\n");
superio_outb(sio_data->sioreg,
SIO_REG_EN_VRM10,
en_vrm10 & ~0x08);
} else if (!(en_vrm10 & 0x08)
&& data->vrm == 100) {
- dev_warn(dev, "Setting VID input "
- "voltage to VRM10\n");
+ dev_warn(dev,
+ "Setting VID input voltage to VRM10\n");
superio_outb(sio_data->sioreg,
SIO_REG_EN_VRM10,
en_vrm10 | 0x08);
if (err)
goto exit_release;
} else {
- dev_info(dev, "VID pins in output mode, CPU VID not "
- "available\n");
+ dev_info(dev,
+ "VID pins in output mode, CPU VID not available\n");
}
}
/* Activate logical device if needed */
val = superio_inb(sioaddr, SIO_REG_ENABLE);
if (!(val & 0x01)) {
- pr_warn("Forcibly enabling Super-I/O. "
- "Sensor is probably unusable.\n");
+ pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n");
superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
}
/* Insmod parameters */
static unsigned short force_subclients[4];
module_param_array(force_subclients, short, NULL, 0);
-MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
- "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+MODULE_PARM_DESC(force_subclients,
+ "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}");
static bool reset;
module_param(reset, bool, 0);
data->sens[nr] = val;
break;
case W83781D_DEFAULT_BETA:
- dev_warn(dev, "Sensor type %d is deprecated, please use 4 "
- "instead\n", W83781D_DEFAULT_BETA);
+ dev_warn(dev,
+ "Sensor type %d is deprecated, please use 4 instead\n",
+ W83781D_DEFAULT_BETA);
/* fall through */
case 4: /* thermistor */
tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
for (i = 2; i <= 3; i++) {
if (force_subclients[i] < 0x48 ||
force_subclients[i] > 0x4f) {
- dev_err(&new_client->dev, "Invalid subclient "
- "address %d; must be 0x48-0x4f\n",
+ dev_err(&new_client->dev,
+ "Invalid subclient address %d; must be 0x48-0x4f\n",
force_subclients[i]);
err = -EINVAL;
goto ERROR_SC_1;
for (i = 0; i < num_sc; i++) {
data->lm75[i] = i2c_new_dummy(adapter, sc_addr[i]);
if (!data->lm75[i]) {
- dev_err(&new_client->dev, "Subclient %d "
- "registration at address 0x%x "
- "failed.\n", i, sc_addr[i]);
+ dev_err(&new_client->dev,
+ "Subclient %d registration at address 0x%x failed.\n",
+ i, sc_addr[i]);
err = -ENOMEM;
if (i == 1)
goto ERROR_SC_3;
goto err_nodev;
if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) {
- dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
- "be the same as ISA device\n", address);
+ dev_dbg(&adapter->dev,
+ "Device at 0x%02x appears to be the same as ISA device\n",
+ address);
goto err_nodev;
}
* as I see very little reason why this would be needed at
* all.
*/
- dev_info(dev, "If reset=1 solved a problem you were "
- "having, please report!\n");
+ dev_info(dev,
+ "If reset=1 solved a problem you were having, please report!\n");
/* save these registers */
i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
/* Enable temp2 */
tmp = w83781d_read_value(data, W83781D_REG_TEMP2_CONFIG);
if (tmp & 0x01) {
- dev_warn(dev, "Enabling temp2, readings "
- "might not make sense\n");
+ dev_warn(dev,
+ "Enabling temp2, readings might not make sense\n");
w83781d_write_value(data, W83781D_REG_TEMP2_CONFIG,
tmp & 0xfe);
}
tmp = w83781d_read_value(data,
W83781D_REG_TEMP3_CONFIG);
if (tmp & 0x01) {
- dev_warn(dev, "Enabling temp3, "
- "readings might not make sense\n");
+ dev_warn(dev,
+ "Enabling temp3, readings might not make sense\n");
w83781d_write_value(data,
W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
}
static unsigned short force_subclients[4];
module_param_array(force_subclients, short, NULL, 0);
-MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
- "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+MODULE_PARM_DESC(force_subclients,
+ "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}");
static bool reset;
module_param(reset, bool, 0);
static unsigned short force_subclients[4];
module_param_array(force_subclients, short, NULL, 0);
-MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
- "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+MODULE_PARM_DESC(force_subclients,
+ "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}");
static bool init;
module_param(init, bool, 0);
for (i = 2; i <= 3; i++) {
if (force_subclients[i] < 0x48 ||
force_subclients[i] > 0x4f) {
- dev_err(&new_client->dev, "invalid subclient "
- "address %d; must be 0x48-0x4f\n",
+ dev_err(&new_client->dev,
+ "invalid subclient address %d; must be 0x48-0x4f\n",
force_subclients[i]);
err = -ENODEV;
goto ERROR_SC_0;
if (!(val & 0x80)) {
if ((data->lm75[0] != NULL) &&
((val & 0x7) == ((val >> 4) & 0x7))) {
- dev_err(&new_client->dev, "duplicate addresses 0x%x, "
- "use force_subclient\n", data->lm75[0]->addr);
+ dev_err(&new_client->dev,
+ "duplicate addresses 0x%x, use force_subclient\n",
+ data->lm75[0]->addr);
err = -ENODEV;
goto ERROR_SC_1;
}
static unsigned short force_subclients[4];
module_param_array(force_subclients, short, NULL, 0);
-MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
- "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+MODULE_PARM_DESC(force_subclients,
+ "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}");
static bool reset;
module_param(reset, bool, 0);
}
if (i == ARRAY_SIZE(watchdog_minors)) {
data->watchdog_miscdev.minor = 0;
- dev_warn(&client->dev, "Couldn't register watchdog chardev "
- "(due to no free minor)\n");
+ dev_warn(&client->dev,
+ "Couldn't register watchdog chardev (due to no free minor)\n");
}
mutex_unlock(&watchdog_data_mutex);
&w83795_in[i][3].dev_attr.attr,
S_IRUGO);
if (err_max || err_min)
- dev_warn(&client->dev, "Failed to set in%d limits "
- "read-only (%d, %d)\n", i, err_max, err_min);
+ dev_warn(&client->dev,
+ "Failed to set in%d limits read-only (%d, %d)\n",
+ i, err_max, err_min);
else
- dev_info(&client->dev, "in%d limits set dynamically "
- "from VID\n", i);
+ dev_info(&client->dev,
+ "in%d limits set dynamically from VID\n", i);
}
}
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff