dpaa2-switch: add support for configuring per port broadcast flooding
authorIoana Ciornei <ioana.ciornei@nxp.com>
Mon, 22 Mar 2021 20:58:57 +0000 (22:58 +0200)
committerDavid S. Miller <davem@davemloft.net>
Mon, 22 Mar 2021 23:37:45 +0000 (16:37 -0700)
The BR_BCAST_FLOOD bridge port flag is now accepted by the driver and a
change in its state will determine a reconfiguration of the broadcast
egress flooding list on the FDB associated with the port.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h

index 2ea3a4d..2ae4faf 100644 (file)
@@ -127,7 +127,10 @@ static void dpaa2_switch_fdb_get_flood_cfg(struct ethsw_core *ethsw, u16 fdb_id,
                if (ethsw->ports[j]->fdb->fdb_id != fdb_id)
                        continue;
 
-               cfg->if_id[i++] = ethsw->ports[j]->idx;
+               if (type == DPSW_BROADCAST && ethsw->ports[j]->bcast_flood)
+                       cfg->if_id[i++] = ethsw->ports[j]->idx;
+               else if (type == DPSW_FLOODING)
+                       cfg->if_id[i++] = ethsw->ports[j]->idx;
        }
 
        /* Add the CTRL interface to the egress flooding domain */
@@ -1260,11 +1263,22 @@ static int dpaa2_switch_port_set_learning(struct ethsw_port_priv *port_priv, boo
        return err;
 }
 
+static int dpaa2_switch_port_flood(struct ethsw_port_priv *port_priv,
+                                  struct switchdev_brport_flags flags)
+{
+       struct ethsw_core *ethsw = port_priv->ethsw_data;
+
+       if (flags.mask & BR_BCAST_FLOOD)
+               port_priv->bcast_flood = !!(flags.val & BR_BCAST_FLOOD);
+
+       return dpaa2_switch_fdb_set_egress_flood(ethsw, port_priv->fdb->fdb_id);
+}
+
 static int dpaa2_switch_port_pre_bridge_flags(struct net_device *netdev,
                                              struct switchdev_brport_flags flags,
                                              struct netlink_ext_ack *extack)
 {
-       if (flags.mask & ~(BR_LEARNING))
+       if (flags.mask & ~(BR_LEARNING | BR_BCAST_FLOOD))
                return -EINVAL;
 
        return 0;
@@ -1285,6 +1299,12 @@ static int dpaa2_switch_port_bridge_flags(struct net_device *netdev,
                        return err;
        }
 
+       if (flags.mask & BR_BCAST_FLOOD) {
+               err = dpaa2_switch_port_flood(port_priv, flags);
+               if (err)
+                       return err;
+       }
+
        return 0;
 }
 
@@ -1643,6 +1663,12 @@ static int dpaa2_switch_port_bridge_leave(struct net_device *netdev)
        if (err)
                netdev_err(netdev, "Unable to restore RX VLANs to the new FDB, err (%d)\n", err);
 
+       /* Reset the flooding state to denote that this port can send any
+        * packet in standalone mode. With this, we are also ensuring that any
+        * later bridge join will have the flooding flag on.
+        */
+       port_priv->bcast_flood = true;
+
        /* Setup the egress flood policy (broadcast, unknown unicast).
         * When the port is not under a bridge, only the CTRL interface is part
         * of the flooding domain besides the actual port
@@ -2728,6 +2754,8 @@ static int dpaa2_switch_probe_port(struct ethsw_core *ethsw,
 
        port_netdev->needed_headroom = DPAA2_SWITCH_NEEDED_HEADROOM;
 
+       port_priv->bcast_flood = true;
+
        /* Set MTU limits */
        port_netdev->min_mtu = ETH_MIN_MTU;
        port_netdev->max_mtu = ETHSW_MAX_FRAME_LENGTH;
index 9335630..65ede60 100644 (file)
@@ -105,13 +105,13 @@ struct ethsw_port_priv {
        struct ethsw_core       *ethsw_data;
        u8                      link_state;
        u8                      stp_state;
-       bool                    flood;
 
        u8                      vlans[VLAN_VID_MASK + 1];
        u16                     pvid;
        u16                     tx_qdid;
 
        struct dpaa2_switch_fdb *fdb;
+       bool                    bcast_flood;
 };
 
 /* Switch data */