M: Florian Fainelli <florian@openwrt.org>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/cpmac.c
+F: drivers/net/ethernet/ti/cpmac.c
CPU FREQUENCY DRIVERS
M: Dave Jones <davej@redhat.com>
W: http://sourceforge.net/projects/tlan/
S: Maintained
F: Documentation/networking/tlan.txt
-F: drivers/net/tlan.*
+F: drivers/net/ethernet/ti/tlan.*
TOMOYO SECURITY MODULE
M: Kentaro Takeda <takedakn@nttdata.co.jp>
To compile this driver as a module, choose M here. The module
will be called netx-eth.
-config TI_DAVINCI_EMAC
- tristate "TI DaVinci EMAC Support"
- depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
- select TI_DAVINCI_MDIO
- select TI_DAVINCI_CPDMA
- select PHYLIB
- help
- This driver supports TI's DaVinci Ethernet .
-
- To compile this driver as a module, choose M here: the module
- will be called davinci_emac_driver. This is recommended.
-
-config TI_DAVINCI_MDIO
- tristate "TI DaVinci MDIO Support"
- depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
- select PHYLIB
- help
- This driver supports TI's DaVinci MDIO module.
-
- To compile this driver as a module, choose M here: the module
- will be called davinci_mdio. This is recommended.
-
-config TI_DAVINCI_CPDMA
- tristate "TI DaVinci CPDMA Support"
- depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
- help
- This driver supports TI's DaVinci CPDMA dma engine.
-
- To compile this driver as a module, choose M here: the module
- will be called davinci_cpdma. This is recommended.
-
config DM9000
tristate "DM9000 support"
depends on ARM || BLACKFIN || MIPS
To compile this driver as a module, choose M here: the module
will be called r6040. This is recommended.
-config TLAN
- tristate "TI ThunderLAN support"
- depends on NET_PCI && (PCI || EISA)
- ---help---
- If you have a PCI Ethernet network card based on the ThunderLAN chip
- which is supported by this driver, say Y and read the
- Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Devices currently supported by this driver are Compaq Netelligent,
- Compaq NetFlex and Olicom cards. Please read the file
- <file:Documentation/networking/tlan.txt> for more details.
-
- To compile this driver as a module, choose M here. The module
- will be called tlan.
-
- Please email feedback to <torben.mathiasen@compaq.com>.
-
-config CPMAC
- tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
- depends on NET_ETHERNET && EXPERIMENTAL && AR7
- select PHYLIB
- help
- TI AR7 CPMAC Ethernet support
-
config NET_POCKET
bool "Pocket and portable adapters"
depends on PARPORT
obj-$(CONFIG_MII) += mii.o
obj-$(CONFIG_MDIO) += mdio.o
obj-$(CONFIG_PHYLIB) += phy/
-
-obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
-obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
-obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
-
obj-$(CONFIG_IP1000) += ipg.o
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_BONDING) += bonding/
obj-$(CONFIG_ROADRUNNER) += rrunner.o
-obj-$(CONFIG_TLAN) += tlan.o
obj-$(CONFIG_R6040) += r6040.o
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
obj-$(CONFIG_FEALNX) += fealnx.o
obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
obj-$(CONFIG_DEFXX) += defxx.o
-obj-$(CONFIG_CPMAC) += cpmac.o
obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
source "drivers/net/ethernet/stmicro/Kconfig"
source "drivers/net/ethernet/sun/Kconfig"
source "drivers/net/ethernet/tehuti/Kconfig"
+source "drivers/net/ethernet/ti/Kconfig"
source "drivers/net/ethernet/toshiba/Kconfig"
source "drivers/net/ethernet/tundra/Kconfig"
source "drivers/net/ethernet/via/Kconfig"
obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
obj-$(CONFIG_NET_VENDOR_SUN) += sun/
obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
+obj-$(CONFIG_NET_VENDOR_TI) += ti/
obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/
obj-$(CONFIG_NET_VENDOR_VIA) += via/
--- /dev/null
+#
+# TI device configuration
+#
+
+config NET_VENDOR_TI
+ bool "Texas Instruments (TI) devices"
+ depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3))
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about TI devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_TI
+
+config TI_DAVINCI_EMAC
+ tristate "TI DaVinci EMAC Support"
+ depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+ select TI_DAVINCI_MDIO
+ select TI_DAVINCI_CPDMA
+ select PHYLIB
+ ---help---
+ This driver supports TI's DaVinci Ethernet .
+
+ To compile this driver as a module, choose M here: the module
+ will be called davinci_emac_driver. This is recommended.
+
+config TI_DAVINCI_MDIO
+ tristate "TI DaVinci MDIO Support"
+ depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+ select PHYLIB
+ ---help---
+ This driver supports TI's DaVinci MDIO module.
+
+ To compile this driver as a module, choose M here: the module
+ will be called davinci_mdio. This is recommended.
+
+config TI_DAVINCI_CPDMA
+ tristate "TI DaVinci CPDMA Support"
+ depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+ ---help---
+ This driver supports TI's DaVinci CPDMA dma engine.
+
+ To compile this driver as a module, choose M here: the module
+ will be called davinci_cpdma. This is recommended.
+
+config TLAN
+ tristate "TI ThunderLAN support"
+ depends on (PCI || EISA)
+ ---help---
+ If you have a PCI Ethernet network card based on the ThunderLAN chip
+ which is supported by this driver, say Y and read the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Devices currently supported by this driver are Compaq Netelligent,
+ Compaq NetFlex and Olicom cards. Please read the file
+ <file:Documentation/networking/tlan.txt> for more details.
+
+ To compile this driver as a module, choose M here. The module
+ will be called tlan.
+
+ Please email feedback to <torben.mathiasen@compaq.com>.
+
+config CPMAC
+ tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && AR7
+ select PHYLIB
+ ---help---
+ TI AR7 CPMAC Ethernet support
+
+endif # NET_VENDOR_TI
--- /dev/null
+#
+# Makefile for the TI network device drivers.
+#
+
+obj-$(CONFIG_TLAN) += tlan.o
+obj-$(CONFIG_CPMAC) += cpmac.o
+obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
+obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
+obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o