--- /dev/null
+Marvell PWM controller
+
+Required properties:
+- compatible: should be one or more of:
+ - "marvell,pxa250-pwm"
+ - "marvell,pxa270-pwm"
+ - "marvell,pxa168-pwm"
+ - "marvell,pxa910-pwm"
+- reg: Physical base address and length of the registers used by the PWM channel
+ Note that one device instance must be created for each PWM that is used, so the
+ length covers only the register window for one PWM output, not that of the
+ entire PWM controller. Currently length is 0x10 for all supported devices.
+- #pwm-cells: Should be 1. This cell is used to specify the period in
+ nanoseconds.
+
+Example PWM device node:
+
+pwm0: pwm@40b00000 {
+ compatible = "marvell,pxa250-pwm";
+ reg = <0x40b00000 0x10>;
+ #pwm-cells = <1>;
+};
+
+Example PWM client node:
+
+backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 5000000>;
+ ...
+}
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/pwm.h>
+#include <linux/of_device.h>
#include <asm/div64.h>
.owner = THIS_MODULE,
};
+#ifdef CONFIG_OF
+/*
+ * Device tree users must create one device instance for each pwm channel.
+ * Hence we dispense with the HAS_SECONDARY_PWM and "tell" the original driver
+ * code that this is a single channel pxa25x-pwm. Currently all devices are
+ * supported identically.
+ */
+static struct of_device_id pwm_of_match[] = {
+ { .compatible = "marvell,pxa250-pwm", .data = &pwm_id_table[0]},
+ { .compatible = "marvell,pxa270-pwm", .data = &pwm_id_table[0]},
+ { .compatible = "marvell,pxa168-pwm", .data = &pwm_id_table[0]},
+ { .compatible = "marvell,pxa910-pwm", .data = &pwm_id_table[0]},
+ { }
+};
+MODULE_DEVICE_TABLE(of, pwm_of_match);
+#else
+#define pwm_of_match NULL
+#endif
+
+static const struct platform_device_id *pxa_pwm_get_id_dt(struct device *dev)
+{
+ const struct of_device_id *id = of_match_device(pwm_of_match, dev);
+
+ return id ? id->data : NULL;
+}
+
+static struct pwm_device *
+pxa_pwm_of_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
+{
+ struct pwm_device *pwm;
+
+ pwm = pwm_request_from_chip(pc, 0, NULL);
+ if (IS_ERR(pwm))
+ return pwm;
+
+ pwm_set_period(pwm, args->args[0]);
+
+ return pwm;
+}
+
static int pwm_probe(struct platform_device *pdev)
{
const struct platform_device_id *id = platform_get_device_id(pdev);
struct resource *r;
int ret = 0;
+ if (IS_ENABLED(CONFIG_OF) && id == NULL)
+ id = pxa_pwm_get_id_dt(&pdev->dev);
+
+ if (id == NULL)
+ return -EINVAL;
+
pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
if (pwm == NULL) {
dev_err(&pdev->dev, "failed to allocate memory\n");
pwm->chip.base = -1;
pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1;
+ if (IS_ENABLED(CONFIG_OF)) {
+ pwm->chip.of_xlate = pxa_pwm_of_xlate;
+ pwm->chip.of_pwm_n_cells = 1;
+ }
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(pwm->mmio_base))
.driver = {
.name = "pxa25x-pwm",
.owner = THIS_MODULE,
+ .of_match_table = pwm_of_match,
},
.probe = pwm_probe,
.remove = pwm_remove,