$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
- gamecube-head.S gamecube.c wii-head.S wii.c
+ gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
image-$(CONFIG_KATMAI) += cuImage.katmai
image-$(CONFIG_WARP) += cuImage.warp
image-$(CONFIG_YOSEMITE) += cuImage.yosemite
+image-$(CONFIG_ISS4xx) += treeImage.iss4xx \
+ treeImage.iss4xx-mpic
# Board ports in arch/powerpc/platform/8xx/Kconfig
image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
--- /dev/null
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "ibm,iss-4xx";
+ compatible = "ibm,iss-4xx";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <0>;
+ clock-frequency = <100000000>; // 100Mhz :-)
+ timebase-frequency = <100000000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "ok";
+ };
+ cpu@1 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <1>;
+ clock-frequency = <100000000>; // 100Mhz :-)
+ timebase-frequency = <100000000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x01f00100>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <2>;
+ clock-frequency = <100000000>; // 100Mhz :-)
+ timebase-frequency = <100000000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x01f00200>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <3>;
+ clock-frequency = <100000000>; // 100Mhz :-)
+ timebase-frequency = <100000000>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0 0x01f00300>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+
+ };
+
+ MPIC: interrupt-controller {
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ dcr-reg = <0xffc00000 0x00030000>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+
+ };
+
+ plb {
+ compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; // Filled in by zImage
+
+ POB0: opb {
+ compatible = "ibm,opb-4xx", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Wish there was a nicer way of specifying a full 32-bit
+ range */
+ ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+ 0x80000000 0x00000001 0x80000000 0x80000000>;
+ clock-frequency = <0>; // Filled in by zImage
+ UART0: serial@40000200 {
+ device_type = "serial";
+ compatible = "ns16550a";
+ reg = <0x40000200 0x00000008>;
+ virtual-reg = <0xe0000200>;
+ clock-frequency = <11059200>;
+ current-speed = <115200>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <0x0 0x2>;
+ };
+ };
+ };
+
+ nvrtc {
+ compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
+ reg = <0 0xEF703000 0x2000>;
+ };
+ iss-block {
+ compatible = "ibm,iss-sim-block-device";
+ reg = <0 0xEF701000 0x1000>;
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@40000200";
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "ibm,iss-4xx";
+ compatible = "ibm,iss-4xx";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,4xx"; // real CPU changed in sim
+ reg = <0x00000000>;
+ clock-frequency = <100000000>; // 100Mhz :-)
+ timebase-frequency = <100000000>;
+ i-cache-line-size = <32>; // may need fixup in sim
+ d-cache-line-size = <32>; // may need fixup in sim
+ i-cache-size = <32768>; /* may need fixup in sim */
+ d-cache-size = <32768>; /* may need fixup in sim */
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-4xx", "ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-4xx", "ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ plb {
+ compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; // Filled in by zImage
+
+ POB0: opb {
+ compatible = "ibm,opb-4xx", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Wish there was a nicer way of specifying a full 32-bit
+ range */
+ ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+ 0x80000000 0x00000001 0x80000000 0x80000000>;
+ clock-frequency = <0>; // Filled in by zImage
+ UART0: serial@40000200 {
+ device_type = "serial";
+ compatible = "ns16550a";
+ reg = <0x40000200 0x00000008>;
+ virtual-reg = <0xe0000200>;
+ clock-frequency = <11059200>;
+ current-speed = <115200>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x0 0x4>;
+ };
+ };
+ };
+
+ nvrtc {
+ compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
+ reg = <0 0xEF703000 0x2000>;
+ };
+ iss-block {
+ compatible = "ibm,iss-sim-block-device";
+ reg = <0 0xEF701000 0x1000>;
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@40000200";
+ };
+};
--- /dev/null
+/*
+ * Copyright 2010 Ben. Herrenschmidt, IBM Corporation.
+ *
+ * Based on earlier code:
+ * Copyright (C) Paul Mackerras 1997.
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * Copyright 2007 David Gibson, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "reg.h"
+#include "io.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "libfdt.h"
+
+BSS_STACK(4096);
+
+static void iss_4xx_fixups(void)
+{
+ ibm4xx_sdram_fixup_memsize();
+}
+
+#define SPRN_PIR 0x11E /* Processor Indentification Register */
+void platform_init(void)
+{
+ unsigned long end_of_ram = 0x08000000;
+ unsigned long avail_ram = end_of_ram - (unsigned long)_end;
+ u32 pir_reg;
+
+ simple_alloc_init(_end, avail_ram, 128, 64);
+ platform_ops.fixups = iss_4xx_fixups;
+ platform_ops.exit = ibm44x_dbcr_reset;
+ pir_reg = mfspr(SPRN_PIR);
+ fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
link_address='0x600000'
platformo="$object/$platform-head.o $object/$platform.o"
;;
+treeboot-iss4xx-mpic)
+ platformo="$object/treeboot-iss4xx.o"
+ ;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
#define PVR_8245 0x80811014
#define PVR_8260 PVR_8240
+/* 476 Simulator seems to currently have the PVR of the 602... */
+#define PVR_476_ISS 0x00052000
+
/* 64-bit processors */
/* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */
#define PV_NORTHSTAR 0x0033
.machine_check = machine_check_47x,
.platform = "ppc470",
},
+ { /* 476 iss */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x00050000,
+ .cpu_name = "476",
+ .cpu_features = CPU_FTRS_47X,
+ .cpu_user_features = COMMON_USER_BOOKE |
+ PPC_FEATURE_HAS_FPU,
+ .cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_47x |
+ MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL,
+ .icache_bsize = 32,
+ .dcache_bsize = 128,
+ .machine_check = machine_check_47x,
+ .platform = "ppc470",
+ },
{ /* default match */
.pvr_mask = 0x00000000,
.pvr_value = 0x00000000,
srwi r3,r3,16
cmplwi cr0,r3,PVR_476@h
beq head_start_47x
+ cmplwi cr0,r3,PVR_476_ISS@h
+ beq head_start_47x
#endif /* CONFIG_PPC_47x */
/*
help
This option enables support for the AMCC PPC440EP evaluation board.
+config ISS4xx
+ bool "ISS 4xx Simulator"
+ depends on (44x || 40x)
+ default n
+ select 405GP if 40x
+ select 440GP if 44x && !PPC_47x
+ select PPC_FPU
+ select OF_RTC
+ help
+ This option enables support for the IBM ISS simulation environment
+
#config LUAN
# bool "Luan"
# depends on 44x
obj-$(CONFIG_WARP) += warp.o
obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
+obj-$(CONFIG_ISS4xx) += iss4xx.o
--- /dev/null
+/*
+ * PPC476 board specific routines
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003-2005 Zultys Technologies
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+#include <asm/mpic.h>
+#include <asm/mmu.h>
+
+static __initdata struct of_device_id iss4xx_of_bus[] = {
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,plb6", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ {},
+};
+
+static int __init iss4xx_device_probe(void)
+{
+ of_platform_bus_probe(NULL, iss4xx_of_bus, NULL);
+ of_instantiate_rtc();
+
+ return 0;
+}
+machine_device_initcall(iss4xx, iss4xx_device_probe);
+
+/* We can have either UICs or MPICs */
+static void __init iss4xx_init_irq(void)
+{
+ struct device_node *np;
+
+ /* Find top level interrupt controller */
+ for_each_node_with_property(np, "interrupt-controller") {
+ if (of_get_property(np, "interrupts", NULL) == NULL)
+ break;
+ }
+ if (np == NULL)
+ panic("Can't find top level interrupt controller");
+
+ /* Check type and do appropriate initialization */
+ if (of_device_is_compatible(np, "ibm,uic")) {
+ uic_init_tree();
+ ppc_md.get_irq = uic_get_irq;
+#ifdef CONFIG_MPIC
+ } else if (of_device_is_compatible(np, "chrp,open-pic")) {
+ /* The MPIC driver will get everything it needs from the
+ * device-tree, just pass 0 to all arguments
+ */
+ struct mpic *mpic = mpic_alloc(np, 0, MPIC_PRIMARY, 0, 0,
+ " MPIC ");
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+ ppc_md.get_irq = mpic_get_irq;
+#endif
+ } else
+ panic("Unrecognized top level interrupt controller");
+}
+
+#ifdef CONFIG_SMP
+static void __cpuinit smp_iss4xx_setup_cpu(int cpu)
+{
+ mpic_setup_this_cpu();
+}
+
+static void __cpuinit smp_iss4xx_kick_cpu(int cpu)
+{
+ struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
+ const u64 *spin_table_addr_prop;
+ u32 *spin_table;
+ extern void start_secondary_47x(void);
+
+ BUG_ON(cpunode == NULL);
+
+ /* Assume spin table. We could test for the enable-method in
+ * the device-tree but currently there's little point as it's
+ * our only supported method
+ */
+ spin_table_addr_prop = of_get_property(cpunode, "cpu-release-addr",
+ NULL);
+ if (spin_table_addr_prop == NULL) {
+ pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", cpu);
+ return;
+ }
+
+ /* Assume it's mapped as part of the linear mapping. This is a bit
+ * fishy but will work fine for now
+ */
+ spin_table = (u32 *)__va(*spin_table_addr_prop);
+ pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
+
+ spin_table[3] = cpu;
+ smp_wmb();
+ spin_table[1] = __pa(start_secondary_47x);
+ mb();
+}
+
+static struct smp_ops_t iss_smp_ops = {
+ .probe = smp_mpic_probe,
+ .message_pass = smp_mpic_message_pass,
+ .setup_cpu = smp_iss4xx_setup_cpu,
+ .kick_cpu = smp_iss4xx_kick_cpu,
+ .give_timebase = smp_generic_give_timebase,
+ .take_timebase = smp_generic_take_timebase,
+};
+
+static void __init iss4xx_smp_init(void)
+{
+ if (mmu_has_feature(MMU_FTR_TYPE_47x))
+ smp_ops = &iss_smp_ops;
+}
+
+#else /* CONFIG_SMP */
+static void __init iss4xx_smp_init(void) { }
+#endif /* CONFIG_SMP */
+
+static void __init iss4xx_setup_arch(void)
+{
+ iss4xx_smp_init();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init iss4xx_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "ibm,iss-4xx"))
+ return 0;
+
+ return 1;
+}
+
+define_machine(iss4xx) {
+ .name = "ISS-4xx",
+ .probe = iss4xx_probe,
+ .progress = udbg_progress,
+ .init_IRQ = iss4xx_init_irq,
+ .setup_arch = iss4xx_setup_arch,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};
projects / profile / common / kernel-common.git / commitdiff