TPL: TM2: config: samsung: Samsung TM2 config file

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>

diff --git a/include/configs/tm2.h b/include/configs/tm2.h
new file mode 100644 (file)
index 0000000..fd0c60f
--- /dev/null
+++ b/include/configs/tm2.h
@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2016 Samsung Electronics
+ *
+ * Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Configuration for Samsung Exynos 5433-based TM2/TM2E boards.
+ * Parts were derived from Hikey board configuration.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __SAMSUNG_TM2_H
+#define __SAMSUNG_TM2_H
+
+#include <linux/sizes.h>
+
+/* MMU Definitions */
+#define CONFIG_SYS_CACHELINE_SIZE 64
+
+#define CONFIG_PWM
+#define CONFIG_ARCH_EXYNOS
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_UNZIP
+
+/* Physical Memory Map */
+
+/* SD/MMC configuration */
+#define CONFIG_BOUNCE_BUFFER
+
+/* DWC3 */
+#define CONFIG_USB_DWC3
+#define CONFIG_USB_DWC3_GADGET
+#define CONFIG_USB_DWC3_PHY_SAMSUNG
+
+/* USB gadget */
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW    2
+
+/* Downloader */
+#define CONFIG_G_DNL_VENDOR_NUM                0x04E8
+#define CONFIG_G_DNL_PRODUCT_NUM       0x6601
+#define CONFIG_G_DNL_MANUFACTURER      "Samsung"
+#define CONFIG_USB_GADGET_DOWNLOAD
+
+/* DFU */
+#define CONFIG_USB_FUNCTION_DFU
+#define CONFIG_DFU_MMC
+#define CONFIG_CMD_DFU
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE   SZ_32M
+#define DFU_DEFAULT_POLL_TIMEOUT       300
+#define DFU_MANIFEST_POLL_TIMEOUT       25000
+
+/* THOR */
+#define CONFIG_G_DNL_THOR_VENDOR_NUM   CONFIG_G_DNL_VENDOR_NUM
+#define CONFIG_G_DNL_THOR_PRODUCT_NUM  0x685D
+#define CONFIG_USB_FUNCTION_THOR
+#define CONFIG_CMD_THOR_DOWNLOAD
+
+/* UMS */
+#define CONFIG_G_DNL_UMS_VENDOR_NUM    0x0525
+#define CONFIG_G_DNL_UMS_PRODUCT_NUM   0xA4A5
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_CMD_USB_MASS_STORAGE
+
+/* CONFIG_SYS_TEXT_BASE needs to align with where sboot loads kernel */
+#define CONFIG_SYS_TEXT_BASE           0x20080000
+
+#define CONFIG_NR_DRAM_BANKS           1
+#define PHYS_SDRAM_1                   0x20000000
+#define PHYS_SDRAM_1_SIZE              0xbf700000
+#define GICD_BASE                      0x11001000
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000
+#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 0x80000)
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (80 << 20))
+#define CONFIG_SYS_BOOTM_LEN           (48 << 20)
+
+/* Serial port Exynos S5P through the device model */
+#define CONFIG_BAUDRATE                        115200
+
+/* Initial environment variables */
+#define CONFIG_BOOTCOMMAND             "run modedetect"
+#define CONFIG_EXTRA_ENV_SETTINGS      "dfu_alt_info=kernel part 0 9 offset 0x400;rootfs part 0 18;system-data part 0 19;user part 0 21\0" \
+                                       "modedetect=if itest.l *0x10580044 == 0x81 || itest.l *0x10580044 == 0x1; then echo Thor mode enabled; run displayimg; thor 0 mmc 0; reset; else echo Booting kernel; run boarddetect; run loadkernel; bootm 0x30080000#$board; reset; fi\0" \
+                                       "fdt_high=0xffffffffffffffff\0" \
+                                       "bootargs=console=ttySAC1,115200 earlycon=exynos4210,0x14C20000 loglevel=7 root=/dev/mmcblk0p18 rootfstype=ext4 rootwait\0" \
+                                       "boarddetect=if itest.l *0x138000b4 == 0x0063f9ff; then setenv board tm2e; elif itest.l *0x138000b4 == 0x0059f9ff; then setenv board tm2; else setenv board unknown; fi; echo Detected $board board\0" \
+                                       "loadkernel=part start mmc 0 9 kernel_sect; part size mmc 0 9 kernel_size; mmc read 0x30000000 $kernel_sect $kernel_size\0" \
+                                       "displayimg=unzip 200d0000 67000000; mw.l 138000b4 0059f9ff; mw.l 138001a0 67e10000; mw.l 13800200 00001680; mw.l 13801410 1; mw.l 13802040 e0000018; sleep 1; mw.l 13802040 e0000008\0"
+#define CONFIG_MENUPROMPT              "Loading, please wait..."
+
+#define CONFIG_ENV_SIZE                        0x1000
+#define CONFIG_ENV_IS_NOWHERE
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
+                                       sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_MAXARGS             16      /* max command args */
+
+#endif /* __SAMSUNG_TM2_H */