arm: dts: imx6ul-geam: Add FEC node

Add FEC node for Engicam GEAM6UL module.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

diff --git a/arch/arm/dts/imx6ul-geam-kit.dts b/arch/arm/dts/imx6ul-geam-kit.dts
index 3672b02..07c21cb 100644 (file)
--- a/arch/arm/dts/imx6ul-geam-kit.dts
+++ b/arch/arm/dts/imx6ul-geam-kit.dts
@@ -59,6 +59,13 @@
        };
 };
 
+&fec1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_enet1>;
+       phy-mode = "rmii";
+       status = "okay";
+};
+
 &i2c1 {
        clock-frequency = <100000>;
        pinctrl-names = "default";
@@ -91,6 +98,20 @@
 };
 
 &iomuxc {
+       pinctrl_enet1: enet1grp {
+               fsl,pins = <
+                       MX6UL_PAD_GPIO1_IO07__ENET2_MDC         0x1b0b0
+                       MX6UL_PAD_GPIO1_IO06__ENET2_MDIO        0x1b0b0
+                       MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+                       MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+                       MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+                       MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+                       MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+                       MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+                       MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b031
+               >;
+       };
+
        pinctrl_i2c1: i2c1grp {
                fsl,pins = <
                        MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0