staging: rtl8188eu: remove RT_TRACE and MSG_88E prints from usb_halinit.c

Eventually, all driver-specific debug prints should be removed.
Take another step in that direction.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210620175301.14988-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index 6c88675..ba80512 100644 (file)
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -648,7 +648,6 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
        HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON);
        status = rtw_hal_power_on(Adapter);
        if (status == _FAIL) {
-               RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init power on!\n"));
                goto exit;
        }
 
@@ -688,7 +687,6 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
                        Adapter->bFWReady = false;
                        return status;
                }
-               RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("Initializeadapt8192CSdio(): Download Firmware Success!!\n"));
                Adapter->bFWReady = true;
        }
        rtl8188e_InitializeFirmwareVars(Adapter);
@@ -709,7 +707,6 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
        HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_LLTT);
        status =  InitLLTTable(Adapter, txpktbuf_bndy);
        if (status == _FAIL) {
-               RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init LLT table\n"));
                goto exit;
        }
 
@@ -845,8 +842,6 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
 {
        u8 val8;
 
-       RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("%s\n", __func__));
-
        /* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
        val8 = usb_read8(Adapter, REG_TX_RPT_CTRL);
        usb_write8(Adapter, REG_TX_RPT_CTRL, val8 & (~BIT(1)));
@@ -938,14 +933,10 @@ u32 rtw_hal_inirp_init(struct adapter *Adapter)
 
        status = _SUCCESS;
 
-       RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
-                ("===> usb_inirp_init\n"));
-
        /* issue Rx irp to receive data */
        precvbuf = precvpriv->precv_buf;
        for (i = 0; i < NR_RECVBUFF; i++) {
                if (!usb_read_port(Adapter, RECV_BULK_IN_ADDR, precvbuf)) {
-                       RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("usb_rx_init: usb_read_port error\n"));
                        status = _FAIL;
                        goto exit;
                }
@@ -954,9 +945,6 @@ u32 rtw_hal_inirp_init(struct adapter *Adapter)
        }
 
 exit:
-
-       RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("<=== usb_inirp_init\n"));
-
        return status;
 }
 
@@ -1000,8 +988,6 @@ static void Hal_EfuseParseMACAddr_8188EU(struct adapter *adapt, u8 *hwinfo, bool
                /* Read Permanent MAC address */
                memcpy(eeprom->mac_addr, &hwinfo[EEPROM_MAC_ADDR_88EU], ETH_ALEN);
        }
-       RT_TRACE(_module_hci_hal_init_c_, _drv_notice_,
-                ("%s: Permanent Address = %pM\n", __func__, eeprom->mac_addr));
 }
 
 static void readAdapterInfo_8188EU(struct adapter *adapt)
@@ -1040,14 +1026,7 @@ static void _ReadPROMContent(struct adapter *Adapter)
 
 void rtw_hal_read_chip_info(struct adapter *Adapter)
 {
-       unsigned long start = jiffies;
-
-       MSG_88E("====> %s\n", __func__);
-
        _ReadPROMContent(Adapter);
-
-       MSG_88E("<==== %s in %d ms\n", __func__,
-               jiffies_to_msecs(jiffies - start));
 }
 
 #define GPIO_DEBUG_PORT_NUM 0