ARM: dts: aspeed-g5: Move EDAC node to APB

Previously the register interface was not attached to any internal bus,
which is not correct - it lives on the APB.

Cc: Stefan M Schaeckeler <sschaeck@cisco.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Stefan Schaeckeler <sschaeck@cisco.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index a259c63fff06fcdf413fba46ac73296545c63355..a35e1bd739af783e2d6334ef1ee9b85f2c0d3198 100644 (file)
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -47,13 +47,6 @@
                reg = <0x80000000 0>;
        };
 
-       edac: sdram@1e6e0000 {
-               compatible = "aspeed,ast2500-sdram-edac";
-               reg = <0x1e6e0000 0x174>;
-               interrupts = <0>;
-               status = "disabled";
-       };
-
        ahb {
                compatible = "simple-bus";
                #address-cells = <1>;
@@ -213,6 +206,13 @@
                        #size-cells = <1>;
                        ranges;
 
+                       edac: sdram@1e6e0000 {
+                               compatible = "aspeed,ast2500-sdram-edac";
+                               reg = <0x1e6e0000 0x174>;
+                               interrupts = <0>;
+                               status = "disabled";
+                       };
+
                        syscon: syscon@1e6e2000 {
                                compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
                                reg = <0x1e6e2000 0x1a8>;