[media] mfd: Add the main bulk of core driver for SI476x code
authorAndrey Smirnov <andrew.smirnov@gmail.com>
Wed, 27 Mar 2013 01:47:19 +0000 (22:47 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Fri, 29 Mar 2013 12:14:20 +0000 (09:14 -0300)
This patch adds main part(out of three) of the I2C driver for the
"core" of MFD device.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/mfd/si476x-i2c.c [new file with mode: 0644]

diff --git a/drivers/mfd/si476x-i2c.c b/drivers/mfd/si476x-i2c.c
new file mode 100644 (file)
index 0000000..118c6b1
--- /dev/null
@@ -0,0 +1,886 @@
+/*
+ * drivers/mfd/si476x-i2c.c -- Core device driver for si476x MFD
+ * device
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+#include <linux/module.h>
+
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+
+#include <linux/mfd/si476x-core.h>
+
+#define SI476X_MAX_IO_ERRORS           10
+#define SI476X_DRIVER_RDS_FIFO_DEPTH   128
+
+/**
+ * si476x_core_config_pinmux() - pin function configuration function
+ *
+ * @core: Core device structure
+ *
+ * Configure the functions of the pins of the radio chip.
+ *
+ * The function returns zero in case of succes or negative error code
+ * otherwise.
+ */
+static int si476x_core_config_pinmux(struct si476x_core *core)
+{
+       int err;
+       dev_dbg(&core->client->dev, "Configuring pinmux\n");
+       err = si476x_core_cmd_dig_audio_pin_cfg(core,
+                                               core->pinmux.dclk,
+                                               core->pinmux.dfs,
+                                               core->pinmux.dout,
+                                               core->pinmux.xout);
+       if (err < 0) {
+               dev_err(&core->client->dev,
+                       "Failed to configure digital audio pins(err = %d)\n",
+                       err);
+               return err;
+       }
+
+       err = si476x_core_cmd_zif_pin_cfg(core,
+                                         core->pinmux.iqclk,
+                                         core->pinmux.iqfs,
+                                         core->pinmux.iout,
+                                         core->pinmux.qout);
+       if (err < 0) {
+               dev_err(&core->client->dev,
+                       "Failed to configure ZIF pins(err = %d)\n",
+                       err);
+               return err;
+       }
+
+       err = si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(core,
+                                                     core->pinmux.icin,
+                                                     core->pinmux.icip,
+                                                     core->pinmux.icon,
+                                                     core->pinmux.icop);
+       if (err < 0) {
+               dev_err(&core->client->dev,
+                       "Failed to configure IC-Link/GPO pins(err = %d)\n",
+                       err);
+               return err;
+       }
+
+       err = si476x_core_cmd_ana_audio_pin_cfg(core,
+                                               core->pinmux.lrout);
+       if (err < 0) {
+               dev_err(&core->client->dev,
+                       "Failed to configure analog audio pins(err = %d)\n",
+                       err);
+               return err;
+       }
+
+       err = si476x_core_cmd_intb_pin_cfg(core,
+                                          core->pinmux.intb,
+                                          core->pinmux.a1);
+       if (err < 0) {
+               dev_err(&core->client->dev,
+                       "Failed to configure interrupt pins(err = %d)\n",
+                       err);
+               return err;
+       }
+
+       return 0;
+}
+
+static inline void si476x_core_schedule_polling_work(struct si476x_core *core)
+{
+       schedule_delayed_work(&core->status_monitor,
+                             usecs_to_jiffies(SI476X_STATUS_POLL_US));
+}
+
+/**
+ * si476x_core_start() - early chip startup function
+ * @core: Core device structure
+ * @soft: When set, this flag forces "soft" startup, where "soft"
+ * power down is the one done by sending appropriate command instead
+ * of using reset pin of the tuner
+ *
+ * Perform required startup sequence to correctly power
+ * up the chip and perform initial configuration. It does the
+ * following sequence of actions:
+ *       1. Claims and enables the power supplies VD and VIO1 required
+ *          for I2C interface of the chip operation.
+ *       2. Waits for 100us, pulls the reset line up, enables irq,
+ *          waits for another 100us as it is specified by the
+ *          datasheet.
+ *       3. Sends 'POWER_UP' command to the device with all provided
+ *          information about power-up parameters.
+ *       4. Configures, pin multiplexor, disables digital audio and
+ *          configures interrupt sources.
+ *
+ * The function returns zero in case of succes or negative error code
+ * otherwise.
+ */
+int si476x_core_start(struct si476x_core *core, bool soft)
+{
+       struct i2c_client *client = core->client;
+       int err;
+
+       if (!soft) {
+               if (gpio_is_valid(core->gpio_reset))
+                       gpio_set_value_cansleep(core->gpio_reset, 1);
+
+               if (client->irq)
+                       enable_irq(client->irq);
+
+               udelay(100);
+
+               if (!client->irq) {
+                       atomic_set(&core->is_alive, 1);
+                       si476x_core_schedule_polling_work(core);
+               }
+       } else {
+               if (client->irq)
+                       enable_irq(client->irq);
+               else {
+                       atomic_set(&core->is_alive, 1);
+                       si476x_core_schedule_polling_work(core);
+               }
+       }
+
+       err = si476x_core_cmd_power_up(core,
+                                      &core->power_up_parameters);
+
+       if (err < 0) {
+               dev_err(&core->client->dev,
+                       "Power up failure(err = %d)\n",
+                       err);
+               goto disable_irq;
+       }
+
+       if (client->irq)
+               atomic_set(&core->is_alive, 1);
+
+       err = si476x_core_config_pinmux(core);
+       if (err < 0) {
+               dev_err(&core->client->dev,
+                       "Failed to configure pinmux(err = %d)\n",
+                       err);
+               goto disable_irq;
+       }
+
+       if (client->irq) {
+               err = regmap_write(core->regmap,
+                                  SI476X_PROP_INT_CTL_ENABLE,
+                                  SI476X_RDSIEN |
+                                  SI476X_STCIEN |
+                                  SI476X_CTSIEN);
+               if (err < 0) {
+                       dev_err(&core->client->dev,
+                               "Failed to configure interrupt sources"
+                               "(err = %d)\n", err);
+                       goto disable_irq;
+               }
+       }
+
+       return 0;
+
+disable_irq:
+       if (err == -ENODEV)
+               atomic_set(&core->is_alive, 0);
+
+       if (client->irq)
+               disable_irq(client->irq);
+       else
+               cancel_delayed_work_sync(&core->status_monitor);
+
+       if (gpio_is_valid(core->gpio_reset))
+               gpio_set_value_cansleep(core->gpio_reset, 0);
+
+       return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_start);
+
+/**
+ * si476x_core_stop() - chip power-down function
+ * @core: Core device structure
+ * @soft: When set, function sends a POWER_DOWN command instead of
+ * bringing reset line low
+ *
+ * Power down the chip by performing following actions:
+ * 1. Disable IRQ or stop the polling worker
+ * 2. Send the POWER_DOWN command if the power down is soft or bring
+ *    reset line low if not.
+ *
+ * The function returns zero in case of succes or negative error code
+ * otherwise.
+ */
+int si476x_core_stop(struct si476x_core *core, bool soft)
+{
+       int err = 0;
+       atomic_set(&core->is_alive, 0);
+
+       if (soft) {
+               /* TODO: This probably shoud be a configurable option,
+                * so it is possible to have the chips keep their
+                * oscillators running
+                */
+               struct si476x_power_down_args args = {
+                       .xosc = false,
+               };
+               err = si476x_core_cmd_power_down(core, &args);
+       }
+
+       /* We couldn't disable those before
+        * 'si476x_core_cmd_power_down' since we expect to get CTS
+        * interrupt */
+       if (core->client->irq)
+               disable_irq(core->client->irq);
+       else
+               cancel_delayed_work_sync(&core->status_monitor);
+
+       if (!soft) {
+               if (gpio_is_valid(core->gpio_reset))
+                       gpio_set_value_cansleep(core->gpio_reset, 0);
+       }
+       return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_stop);
+
+/**
+ * si476x_core_set_power_state() - set the level at which the power is
+ * supplied for the chip.
+ * @core: Core device structure
+ * @next_state: enum si476x_power_state describing power state to
+ *              switch to.
+ *
+ * Switch on all the required power supplies
+ *
+ * This function returns 0 in case of suvccess and negative error code
+ * otherwise.
+ */
+int si476x_core_set_power_state(struct si476x_core *core,
+                               enum si476x_power_state next_state)
+{
+       /*
+          It is not clear form the datasheet if it is possible to
+          work with device if not all power domains are operational.
+          So for now the power-up policy is "power-up all the things!"
+        */
+       int err = 0;
+
+       if (core->power_state == SI476X_POWER_INCONSISTENT) {
+               dev_err(&core->client->dev,
+                       "The device in inconsistent power state\n");
+               return -EINVAL;
+       }
+
+       if (next_state != core->power_state) {
+               switch (next_state) {
+               case SI476X_POWER_UP_FULL:
+                       err = regulator_bulk_enable(ARRAY_SIZE(core->supplies),
+                                                   core->supplies);
+                       if (err < 0) {
+                               core->power_state = SI476X_POWER_INCONSISTENT;
+                               break;
+                       }
+                       /*
+                        * Startup timing diagram recommends to have a
+                        * 100 us delay between enabling of the power
+                        * supplies and turning the tuner on.
+                        */
+                       udelay(100);
+
+                       err = si476x_core_start(core, false);
+                       if (err < 0)
+                               goto disable_regulators;
+
+                       core->power_state = next_state;
+                       break;
+
+               case SI476X_POWER_DOWN:
+                       core->power_state = next_state;
+                       err = si476x_core_stop(core, false);
+                       if (err < 0)
+                               core->power_state = SI476X_POWER_INCONSISTENT;
+disable_regulators:
+                       err = regulator_bulk_disable(ARRAY_SIZE(core->supplies),
+                                                    core->supplies);
+                       if (err < 0)
+                               core->power_state = SI476X_POWER_INCONSISTENT;
+                       break;
+               default:
+                       BUG();
+               }
+       }
+
+       return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_set_power_state);
+
+/**
+ * si476x_core_report_drainer_stop() - mark the completion of the RDS
+ * buffer drain porcess by the worker.
+ *
+ * @core: Core device structure
+ */
+static inline void si476x_core_report_drainer_stop(struct si476x_core *core)
+{
+       mutex_lock(&core->rds_drainer_status_lock);
+       core->rds_drainer_is_working = false;
+       mutex_unlock(&core->rds_drainer_status_lock);
+}
+
+/**
+ * si476x_core_start_rds_drainer_once() - start RDS drainer worker if
+ * ther is none working, do nothing otherwise
+ *
+ * @core: Datastructure corresponding to the chip.
+ */
+static inline void si476x_core_start_rds_drainer_once(struct si476x_core *core)
+{
+       mutex_lock(&core->rds_drainer_status_lock);
+       if (!core->rds_drainer_is_working) {
+               core->rds_drainer_is_working = true;
+               schedule_work(&core->rds_fifo_drainer);
+       }
+       mutex_unlock(&core->rds_drainer_status_lock);
+}
+/**
+ * si476x_drain_rds_fifo() - RDS buffer drainer.
+ * @work: struct work_struct being ppassed to the function by the
+ * kernel.
+ *
+ * Drain the contents of the RDS FIFO of
+ */
+static void si476x_core_drain_rds_fifo(struct work_struct *work)
+{
+       int err;
+
+       struct si476x_core *core = container_of(work, struct si476x_core,
+                                               rds_fifo_drainer);
+
+       struct si476x_rds_status_report report;
+
+       si476x_core_lock(core);
+       err = si476x_core_cmd_fm_rds_status(core, true, false, false, &report);
+       if (!err) {
+               int i = report.rdsfifoused;
+               dev_dbg(&core->client->dev,
+                       "%d elements in RDS FIFO. Draining.\n", i);
+               for (; i > 0; --i) {
+                       err = si476x_core_cmd_fm_rds_status(core, false, false,
+                                                           (i == 1), &report);
+                       if (err < 0)
+                               goto unlock;
+
+                       kfifo_in(&core->rds_fifo, report.rds,
+                                sizeof(report.rds));
+                       dev_dbg(&core->client->dev, "RDS data:\n %*ph\n",
+                               sizeof(report.rds), report.rds);
+               }
+               dev_dbg(&core->client->dev, "Drrrrained!\n");
+               wake_up_interruptible(&core->rds_read_queue);
+       }
+
+unlock:
+       si476x_core_unlock(core);
+       si476x_core_report_drainer_stop(core);
+}
+
+/**
+ * si476x_core_pronounce_dead()
+ *
+ * @core: Core device structure
+ *
+ * Mark the device as being dead and wake up all potentially waiting
+ * threads of execution.
+ *
+ */
+static void si476x_core_pronounce_dead(struct si476x_core *core)
+{
+       dev_info(&core->client->dev, "Core device is dead.\n");
+
+       atomic_set(&core->is_alive, 0);
+
+       /* Wake up al possible waiting processes */
+       wake_up_interruptible(&core->rds_read_queue);
+
+       atomic_set(&core->cts, 1);
+       wake_up(&core->command);
+
+       atomic_set(&core->stc, 1);
+       wake_up(&core->tuning);
+}
+
+/**
+ * si476x_core_i2c_xfer()
+ *
+ * @core: Core device structure
+ * @type: Transfer type
+ * @buf: Transfer buffer for/with data
+ * @count: Transfer buffer size
+ *
+ * Perfrom and I2C transfer(either read or write) and keep a counter
+ * of I/O errors. If the error counter rises above the threshold
+ * pronounce device dead.
+ *
+ * The function returns zero on succes or negative error code on
+ * failure.
+ */
+int si476x_core_i2c_xfer(struct si476x_core *core,
+                   enum si476x_i2c_type type,
+                   char *buf, int count)
+{
+       static int io_errors_count;
+       int err;
+       if (type == SI476X_I2C_SEND)
+               err = i2c_master_send(core->client, buf, count);
+       else
+               err = i2c_master_recv(core->client, buf, count);
+
+       if (err < 0) {
+               if (io_errors_count++ > SI476X_MAX_IO_ERRORS)
+                       si476x_core_pronounce_dead(core);
+       } else {
+               io_errors_count = 0;
+       }
+
+       return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_i2c_xfer);
+
+/**
+ * si476x_get_status()
+ * @core: Core device structure
+ *
+ * Get the status byte of the core device by berforming one byte I2C
+ * read.
+ *
+ * The function returns a status value or a negative error code on
+ * error.
+ */
+static int si476x_core_get_status(struct si476x_core *core)
+{
+       u8 response;
+       int err = si476x_core_i2c_xfer(core, SI476X_I2C_RECV,
+                                 &response, sizeof(response));
+
+       return (err < 0) ? err : response;
+}
+
+/**
+ * si476x_get_and_signal_status() - IRQ dispatcher
+ * @core: Core device structure
+ *
+ * Dispatch the arrived interrupt request based on the value of the
+ * status byte reported by the tuner.
+ *
+ */
+static void si476x_core_get_and_signal_status(struct si476x_core *core)
+{
+       int status = si476x_core_get_status(core);
+       if (status < 0) {
+               dev_err(&core->client->dev, "Failed to get status\n");
+               return;
+       }
+
+       if (status & SI476X_CTS) {
+               /* Unfortunately completions could not be used for
+                * signalling CTS since this flag cannot be cleared
+                * in status byte, and therefore once it becomes true
+                * multiple calls to 'complete' would cause the
+                * commands following the current one to be completed
+                * before they actually are */
+               dev_dbg(&core->client->dev, "[interrupt] CTSINT\n");
+               atomic_set(&core->cts, 1);
+               wake_up(&core->command);
+       }
+
+       if (status & SI476X_FM_RDS_INT) {
+               dev_dbg(&core->client->dev, "[interrupt] RDSINT\n");
+               si476x_core_start_rds_drainer_once(core);
+       }
+
+       if (status & SI476X_STC_INT) {
+               dev_dbg(&core->client->dev, "[interrupt] STCINT\n");
+               atomic_set(&core->stc, 1);
+               wake_up(&core->tuning);
+       }
+}
+
+static void si476x_core_poll_loop(struct work_struct *work)
+{
+       struct si476x_core *core = SI476X_WORK_TO_CORE(work);
+
+       si476x_core_get_and_signal_status(core);
+
+       if (atomic_read(&core->is_alive))
+               si476x_core_schedule_polling_work(core);
+}
+
+static irqreturn_t si476x_core_interrupt(int irq, void *dev)
+{
+       struct si476x_core *core = dev;
+
+       si476x_core_get_and_signal_status(core);
+
+       return IRQ_HANDLED;
+}
+
+/**
+ * si476x_firmware_version_to_revision()
+ * @core: Core device structure
+ * @major:  Firmware major number
+ * @minor1: Firmware first minor number
+ * @minor2: Firmware second minor number
+ *
+ * Convert a chip's firmware version number into an offset that later
+ * will be used to as offset in "vtable" of tuner functions
+ *
+ * This function returns a positive offset in case of success and a -1
+ * in case of failure.
+ */
+static int si476x_core_fwver_to_revision(struct si476x_core *core,
+                                        int func, int major,
+                                        int minor1, int minor2)
+{
+       switch (func) {
+       case SI476X_FUNC_FM_RECEIVER:
+               switch (major) {
+               case 5:
+                       return SI476X_REVISION_A10;
+               case 8:
+                       return SI476X_REVISION_A20;
+               case 10:
+                       return SI476X_REVISION_A30;
+               default:
+                       goto unknown_revision;
+               }
+       case SI476X_FUNC_AM_RECEIVER:
+               switch (major) {
+               case 5:
+                       return SI476X_REVISION_A10;
+               case 7:
+                       return SI476X_REVISION_A20;
+               case 9:
+                       return SI476X_REVISION_A30;
+               default:
+                       goto unknown_revision;
+               }
+       case SI476X_FUNC_WB_RECEIVER:
+               switch (major) {
+               case 3:
+                       return SI476X_REVISION_A10;
+               case 5:
+                       return SI476X_REVISION_A20;
+               case 7:
+                       return SI476X_REVISION_A30;
+               default:
+                       goto unknown_revision;
+               }
+       case SI476X_FUNC_BOOTLOADER:
+       default:                /* FALLTHROUG */
+               BUG();
+               return -1;
+       }
+
+unknown_revision:
+       dev_err(&core->client->dev,
+               "Unsupported version of the firmware: %d.%d.%d, "
+               "reverting to A10 comptible functions\n",
+               major, minor1, minor2);
+
+       return SI476X_REVISION_A10;
+}
+
+/**
+ * si476x_get_revision_info()
+ * @core: Core device structure
+ *
+ * Get the firmware version number of the device. It is done in
+ * following three steps:
+ *    1. Power-up the device
+ *    2. Send the 'FUNC_INFO' command
+ *    3. Powering the device down.
+ *
+ * The function return zero on success and a negative error code on
+ * failure.
+ */
+static int si476x_core_get_revision_info(struct si476x_core *core)
+{
+       int rval;
+       struct si476x_func_info info;
+
+       si476x_core_lock(core);
+       rval = si476x_core_set_power_state(core, SI476X_POWER_UP_FULL);
+       if (rval < 0)
+               goto exit;
+
+       rval = si476x_core_cmd_func_info(core, &info);
+       if (rval < 0)
+               goto power_down;
+
+       core->revision = si476x_core_fwver_to_revision(core, info.func,
+                                                      info.firmware.major,
+                                                      info.firmware.minor[0],
+                                                      info.firmware.minor[1]);
+power_down:
+       si476x_core_set_power_state(core, SI476X_POWER_DOWN);
+exit:
+       si476x_core_unlock(core);
+
+       return rval;
+}
+
+bool si476x_core_has_am(struct si476x_core *core)
+{
+       return core->chip_id == SI476X_CHIP_SI4761 ||
+               core->chip_id == SI476X_CHIP_SI4764;
+}
+EXPORT_SYMBOL_GPL(si476x_core_has_am);
+
+bool si476x_core_has_diversity(struct si476x_core *core)
+{
+       return core->chip_id == SI476X_CHIP_SI4764;
+}
+EXPORT_SYMBOL_GPL(si476x_core_has_diversity);
+
+bool si476x_core_is_a_secondary_tuner(struct si476x_core *core)
+{
+       return si476x_core_has_diversity(core) &&
+               (core->diversity_mode == SI476X_PHDIV_SECONDARY_ANTENNA ||
+                core->diversity_mode == SI476X_PHDIV_SECONDARY_COMBINING);
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_a_secondary_tuner);
+
+bool si476x_core_is_a_primary_tuner(struct si476x_core *core)
+{
+       return si476x_core_has_diversity(core) &&
+               (core->diversity_mode == SI476X_PHDIV_PRIMARY_ANTENNA ||
+                core->diversity_mode == SI476X_PHDIV_PRIMARY_COMBINING);
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_a_primary_tuner);
+
+bool si476x_core_is_in_am_receiver_mode(struct si476x_core *core)
+{
+       return si476x_core_has_am(core) &&
+               (core->power_up_parameters.func == SI476X_FUNC_AM_RECEIVER);
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_in_am_receiver_mode);
+
+bool si476x_core_is_powered_up(struct si476x_core *core)
+{
+       return core->power_state == SI476X_POWER_UP_FULL;
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_powered_up);
+
+static int si476x_core_probe(struct i2c_client *client,
+                            const struct i2c_device_id *id)
+{
+       int rval;
+       struct si476x_core          *core;
+       struct si476x_platform_data *pdata;
+       struct mfd_cell *cell;
+       int              cell_num;
+
+       core = devm_kzalloc(&client->dev, sizeof(*core), GFP_KERNEL);
+       if (!core) {
+               dev_err(&client->dev,
+                       "failed to allocate 'struct si476x_core'\n");
+               return -ENOMEM;
+       }
+       core->client = client;
+
+       core->regmap = devm_regmap_init_si476x(core);
+       if (IS_ERR(core->regmap)) {
+               rval = PTR_ERR(core->regmap);
+               dev_err(&client->dev,
+                       "Failed to allocate register map: %d\n",
+                       rval);
+               return rval;
+       }
+
+       i2c_set_clientdata(client, core);
+
+       atomic_set(&core->is_alive, 0);
+       core->power_state = SI476X_POWER_DOWN;
+
+       pdata = client->dev.platform_data;
+       if (pdata) {
+               memcpy(&core->power_up_parameters,
+                      &pdata->power_up_parameters,
+                      sizeof(core->power_up_parameters));
+
+               core->gpio_reset = -1;
+               if (gpio_is_valid(pdata->gpio_reset)) {
+                       rval = gpio_request(pdata->gpio_reset, "si476x reset");
+                       if (rval) {
+                               dev_err(&client->dev,
+                                       "Failed to request gpio: %d\n", rval);
+                               return rval;
+                       }
+                       core->gpio_reset = pdata->gpio_reset;
+                       gpio_direction_output(core->gpio_reset, 0);
+               }
+
+               core->diversity_mode = pdata->diversity_mode;
+               memcpy(&core->pinmux, &pdata->pinmux,
+                      sizeof(struct si476x_pinmux));
+       } else {
+               dev_err(&client->dev, "No platform data provided\n");
+               return -EINVAL;
+       }
+
+       core->supplies[0].supply = "vd";
+       core->supplies[1].supply = "va";
+       core->supplies[2].supply = "vio1";
+       core->supplies[3].supply = "vio2";
+
+       rval = devm_regulator_bulk_get(&client->dev,
+                                      ARRAY_SIZE(core->supplies),
+                                      core->supplies);
+       if (rval) {
+               dev_err(&client->dev, "Failet to gett all of the regulators\n");
+               goto free_gpio;
+       }
+
+       mutex_init(&core->cmd_lock);
+       init_waitqueue_head(&core->command);
+       init_waitqueue_head(&core->tuning);
+
+       rval = kfifo_alloc(&core->rds_fifo,
+                          SI476X_DRIVER_RDS_FIFO_DEPTH *
+                          sizeof(struct v4l2_rds_data),
+                          GFP_KERNEL);
+       if (rval) {
+               dev_err(&client->dev, "Could not alloate the FIFO\n");
+               goto free_gpio;
+       }
+       mutex_init(&core->rds_drainer_status_lock);
+       init_waitqueue_head(&core->rds_read_queue);
+       INIT_WORK(&core->rds_fifo_drainer, si476x_core_drain_rds_fifo);
+
+       if (client->irq) {
+               rval = devm_request_threaded_irq(&client->dev,
+                                                client->irq, NULL,
+                                                si476x_core_interrupt,
+                                                IRQF_TRIGGER_FALLING,
+                                                client->name, core);
+               if (rval < 0) {
+                       dev_err(&client->dev, "Could not request IRQ %d\n",
+                               client->irq);
+                       goto free_kfifo;
+               }
+               disable_irq(client->irq);
+               dev_dbg(&client->dev, "IRQ requested.\n");
+
+               core->rds_fifo_depth = 20;
+       } else {
+               INIT_DELAYED_WORK(&core->status_monitor,
+                                 si476x_core_poll_loop);
+               dev_info(&client->dev,
+                        "No IRQ number specified, will use polling\n");
+
+               core->rds_fifo_depth = 5;
+       }
+
+       core->chip_id = id->driver_data;
+
+       rval = si476x_core_get_revision_info(core);
+       if (rval < 0) {
+               rval = -ENODEV;
+               goto free_kfifo;
+       }
+
+       cell_num = 0;
+
+       cell = &core->cells[SI476X_RADIO_CELL];
+       cell->name = "si476x-radio";
+       cell_num++;
+
+#ifdef CONFIG_SND_SOC_SI476X
+       if ((core->chip_id == SI476X_CHIP_SI4761 ||
+            core->chip_id == SI476X_CHIP_SI4764)       &&
+           core->pinmux.dclk == SI476X_DCLK_DAUDIO     &&
+           core->pinmux.dfs  == SI476X_DFS_DAUDIO      &&
+           core->pinmux.dout == SI476X_DOUT_I2S_OUTPUT &&
+           core->pinmux.xout == SI476X_XOUT_TRISTATE) {
+               cell = &core->cells[SI476X_CODEC_CELL];
+               cell->name          = "si476x-codec";
+               cell_num++;
+       }
+#endif
+       rval = mfd_add_devices(&client->dev,
+                              (client->adapter->nr << 8) + client->addr,
+                              core->cells, cell_num,
+                              NULL, 0, NULL);
+       if (!rval)
+               return 0;
+
+free_kfifo:
+       kfifo_free(&core->rds_fifo);
+
+free_gpio:
+       if (gpio_is_valid(core->gpio_reset))
+               gpio_free(core->gpio_reset);
+
+       return rval;
+}
+
+static int si476x_core_remove(struct i2c_client *client)
+{
+       struct si476x_core *core = i2c_get_clientdata(client);
+
+       si476x_core_pronounce_dead(core);
+       mfd_remove_devices(&client->dev);
+
+       if (client->irq)
+               disable_irq(client->irq);
+       else
+               cancel_delayed_work_sync(&core->status_monitor);
+
+       kfifo_free(&core->rds_fifo);
+
+       if (gpio_is_valid(core->gpio_reset))
+               gpio_free(core->gpio_reset);
+
+       return 0;
+}
+
+
+static const struct i2c_device_id si476x_id[] = {
+       { "si4761", SI476X_CHIP_SI4761 },
+       { "si4764", SI476X_CHIP_SI4764 },
+       { "si4768", SI476X_CHIP_SI4768 },
+       { },
+};
+MODULE_DEVICE_TABLE(i2c, si476x_id);
+
+static struct i2c_driver si476x_core_driver = {
+       .driver         = {
+               .name   = "si476x-core",
+               .owner  = THIS_MODULE,
+       },
+       .probe          = si476x_core_probe,
+       .remove         = si476x_core_remove,
+       .id_table       = si476x_id,
+};
+module_i2c_driver(si476x_core_driver);
+
+
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("Si4761/64/68 AM/FM MFD core device driver");
+MODULE_LICENSE("GPL");