sudo make install
```
+### Add USB device Rules
+
+This is an optional environment.
+But as ARTIK is connected through USB, some operation like programming of binary can't be worked without this configuration.
+
+1. Make a file named 99-\<anyname\>.rules.
+2. Add below contents at above file.
+```
+SUBSYSTEMS=="usb",ATTRS{idVendor}=="0403",ATTRS{idProduct}=="6010",MODE="0666" RUN+="/sbin/modprobe ftdi_sio" RUN+="/bin/sh -c 'echo 0403 6010 > /sys/bus/usb-serial/drivers/ftdi_sio/new_id'"
+```
+3. Place the above file in /etc/udev/rules.d folder with sudo permission.
+4. Reboot your system.
+
+
## How to program a binary
There are two methods, using OpenOCD or script.
sudo ln -s /usr/local/lib/libftd2xx.so.1.0.4 libftd2xx.so
```
+### Add USB device Rules
+
+This is an optional environment.
+But as this board is connected through USB, some operation like programming of binary can't be worked without this configuration.
+
+1. Make a file named 99-\<anyname\>.rules.
+2. Add below contents at above file.
+```
+SUBSYSTEMS=="usb",ATTRS{idVendor}=="0403",ATTRS{idProduct}=="6010",MODE="0666" RUN+="/sbin/modprobe ftdi_sio" RUN+="/bin/sh -c 'echo 0403 6010 > /sys/bus/usb-serial/drivers/ftdi_sio/new_id'"
+```
+3. Place the above file in /etc/udev/rules.d folder with sudo permission.
+4. Reboot your system.
+
## How to program a binary
After buiding a Tizen RT, execute below at $TIZENRT_BASEDIR/os folder.