dt-bindings: iio: adc: exynos: Convert Exynos ADC bindings to json-schema

Convert Samsung Exynos Analog to Digital Converter bindings to DT schema
format using json-schema.

This is a direct conversion of existing bindings so it also copies the
existing error in the bindings regarding the requirement of two register
address ranges for certain compatibles.  The inconsistency in binding
was caused by commit fafb37cfae6d ("iio: exyno-adc: use syscon for PMU
register access").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt
deleted file mode 100644 (file)
index e1fe02f..0000000
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-Samsung Exynos Analog to Digital Converter bindings
-
-The devicetree bindings are for the new ADC driver written for
-Exynos4 and upward SoCs from Samsung.
-
-New driver handles the following
-1. Supports ADC IF found on EXYNOS4412/EXYNOS5250
-   and future SoCs from Samsung
-2. Add ADC driver under iio/adc framework
-3. Also adds the Documentation for device tree bindings
-
-Required properties:
-- compatible:          Must be "samsung,exynos-adc-v1"
-                               for Exynos5250 controllers.
-                       Must be "samsung,exynos-adc-v2" for
-                               future controllers.
-                       Must be "samsung,exynos3250-adc" for
-                               controllers compatible with ADC of Exynos3250.
-                       Must be "samsung,exynos4212-adc" for
-                               controllers compatible with ADC of Exynos4212 and Exynos4412.
-                       Must be "samsung,exynos7-adc" for
-                               the ADC in Exynos7 and compatibles
-                       Must be "samsung,s3c2410-adc" for
-                               the ADC in s3c2410 and compatibles
-                       Must be "samsung,s3c2416-adc" for
-                               the ADC in s3c2416 and compatibles
-                       Must be "samsung,s3c2440-adc" for
-                               the ADC in s3c2440 and compatibles
-                       Must be "samsung,s3c2443-adc" for
-                               the ADC in s3c2443 and compatibles
-                       Must be "samsung,s3c6410-adc" for
-                               the ADC in s3c6410 and compatibles
-                       Must be "samsung,s5pv210-adc" for
-                               the ADC in s5pv210 and compatibles
-- reg:                 List of ADC register address range
-                       - The base address and range of ADC register
-                       - The base address and range of ADC_PHY register (every
-                         SoC except for s3c24xx/s3c64xx ADC)
-- interrupts:          Contains the interrupt information for the timer. The
-                       format is being dependent on which interrupt controller
-                       the Samsung device uses.
-- #io-channel-cells = <1>; As ADC has multiple outputs
-- clocks               From common clock bindings: handles to clocks specified
-                       in "clock-names" property, in the same order.
-- clock-names          From common clock bindings: list of clock input names
-                       used by ADC block:
-                       - "adc" : ADC bus clock
-                       - "sclk" : ADC special clock (only for Exynos3250 and
-                                  compatible ADC block)
-- vdd-supply           VDD input supply.
-
-- samsung,syscon-phandle Contains the PMU system controller node
-                       (To access the ADC_PHY register on Exynos5250/5420/5800/3250)
-Optional properties:
-- has-touchscreen:     If present, indicates that a touchscreen is
-                       connected an usable.
-
-Note: child nodes can be added for auto probing from device tree.
-
-Example: adding device info in dtsi file
-
-adc: adc@12d10000 {
-       compatible = "samsung,exynos-adc-v1";
-       reg = <0x12D10000 0x100>;
-       interrupts = <0 106 0>;
-       #io-channel-cells = <1>;
-       io-channel-ranges;
-
-       clocks = <&clock 303>;
-       clock-names = "adc";
-
-       vdd-supply = <&buck5_reg>;
-       samsung,syscon-phandle = <&pmu_system_controller>;
-};
-
-Example: adding device info in dtsi file for Exynos3250 with additional sclk
-
-adc: adc@126c0000 {
-       compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
-       reg = <0x126C0000 0x100>;
-       interrupts = <0 137 0>;
-       #io-channel-cells = <1>;
-       io-channel-ranges;
-
-       clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
-       clock-names = "adc", "sclk";
-
-       vdd-supply = <&buck5_reg>;
-       samsung,syscon-phandle = <&pmu_system_controller>;
-};
-
-Example: Adding child nodes in dts file
-
-adc@12d10000 {
-
-       /* NTC thermistor is a hwmon device */
-       ncp15wb473@0 {
-               compatible = "murata,ncp15wb473";
-               pullup-uv = <1800000>;
-               pullup-ohm = <47000>;
-               pulldown-ohm = <0>;
-               io-channels = <&adc 4>;
-       };
-};
-
-Note: Does not apply to ADC driver under arch/arm/plat-samsung/
-Note: The child node can be added under the adc node or separately.

diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
new file mode 100644 (file)
index 0000000..dd58121
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/samsung,exynos-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Analog to Digital Converter (ADC)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos-adc-v1                 # Exynos5250
+      - samsung,exynos-adc-v2
+      - samsung,exynos3250-adc
+      - samsung,exynos4212-adc                # Exynos4212 and Exynos4412
+      - samsung,exynos7-adc
+      - samsung,s3c2410-adc
+      - samsung,s3c2416-adc
+      - samsung,s3c2440-adc
+      - samsung,s3c2443-adc
+      - samsung,s3c6410-adc
+      - samsung,s5pv210-adc
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    description:
+      Phandle to ADC bus clock. For Exynos3250 additional clock is needed.
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    description:
+      Must contain clock names (adc, sclk) matching phandles in clocks
+      property.
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  vdd-supply:
+    description: VDD input supply
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description:
+      Phandle to the PMU system controller node (to access the ADC_PHY
+      register on Exynos5250/5420/5800/3250).
+
+  has-touchscreen:
+    description:
+      If present, indicates that a touchscreen is connected and usable.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - "#io-channel-cells"
+  - vdd-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos-adc-v1
+              - samsung,exynos-adc-v2
+              - samsung,exynos3250-adc
+              - samsung,exynos4212-adc
+              - samsung,s5pv210-adc
+    then:
+      properties:
+        reg:
+          items:
+            # For S5P and Exynos
+            - description: base registers
+            - description: phy registers
+      required:
+        - samsung,syscon-phandle
+    else:
+      properties:
+        reg:
+          items:
+            - description: base registers
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-adc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: adc
+            - const: sclk
+    else:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: adc
+
+examples:
+  - |
+    adc: adc@12d10000 {
+      compatible = "samsung,exynos-adc-v1";
+      reg = <0x12d10000 0x100>;
+      interrupts = <0 106 0>;
+      #io-channel-cells = <1>;
+      io-channel-ranges;
+
+      clocks = <&clock 303>;
+      clock-names = "adc";
+
+      vdd-supply = <&buck5_reg>;
+      samsung,syscon-phandle = <&pmu_system_controller>;
+
+      /* NTC thermistor is a hwmon device */
+      ncp15wb473@0 {
+        compatible = "murata,ncp15wb473";
+        pullup-uv = <1800000>;
+        pullup-ohm = <47000>;
+        pulldown-ohm = <0>;
+        io-channels = <&adc 4>;
+      };
+    };
+
+  - |
+    adc@126c0000 {
+      compatible = "samsung,exynos3250-adc";
+      reg = <0x126C0000 0x100>;
+      interrupts = <0 137 0>;
+      #io-channel-cells = <1>;
+      io-channel-ranges;
+
+      clocks = <&cmu 0>, // CLK_TSADC
+               <&cmu 1>; // CLK_SCLK_TSADC
+      clock-names = "adc", "sclk";
+
+      vdd-supply = <&buck5_reg>;
+      samsung,syscon-phandle = <&pmu_system_controller>;
+    };