ASoC: S3C24XX: Support for Simtec Hermes boards

Add support for the tlv320aic3x CODEC on the Simtec Hermes board.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 78cfd8d..f8e0fff 100644 (file)
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -91,3 +91,10 @@ config SND_S3C24XX_SOC_SIMTEC_TLV320AIC23
        select SND_S3C24XX_SOC_I2S
        select SND_SOC_TLV320AIC23
        select SND_S3C24XX_SOC_SIMTEC
+
+config SND_S3C24XX_SOC_SIMTEC_HERMES
+       tristate "SoC I2S Audio support for Simtec Hermes board"
+       depends on SND_S3C24XX_SOC
+       select SND_S3C24XX_SOC_I2S
+       select SND_SOC_TLV320AIC3X
+       select SND_S3C24XX_SOC_SIMTEC

diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index 1ccbb87..99f5a7d 100644 (file)
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -21,6 +21,7 @@ snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
 snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
 snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
 snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o
+snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o
 snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o
 
 obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
@@ -30,4 +31,6 @@ obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
 obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
 obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
 obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC) += snd-soc-s3c24xx-simtec.o
+obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o
 obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o
+

diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
new file mode 100644 (file)
index 0000000..8346bd9
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
@@ -0,0 +1,153 @@
+/* sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <plat/audio-simtec.h>
+
+#include "s3c24xx-pcm.h"
+#include "s3c24xx-i2s.h"
+#include "s3c24xx_simtec.h"
+
+#include "../codecs/tlv320aic3x.h"
+
+static const struct snd_soc_dapm_widget dapm_widgets[] = {
+       SND_SOC_DAPM_LINE("GSM Out", NULL),
+       SND_SOC_DAPM_LINE("GSM In", NULL),
+       SND_SOC_DAPM_LINE("Line In", NULL),
+       SND_SOC_DAPM_LINE("Line Out", NULL),
+       SND_SOC_DAPM_LINE("ZV", NULL),
+       SND_SOC_DAPM_MIC("Mic Jack", NULL),
+       SND_SOC_DAPM_HP("Headphone Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route base_map[] = {
+       /* Headphone connected to HP{L,R}OUT and HP{L,R}COM */
+
+       { "Headphone Jack", NULL, "HPLOUT" },
+       { "Headphone Jack", NULL, "HPLCOM" },
+       { "Headphone Jack", NULL, "HPROUT" },
+       { "Headphone Jack", NULL, "HPRCOM" },
+
+       /* ZV connected to Line1 */
+
+       { "LINE1L", NULL, "ZV" },
+       { "LINE1R", NULL, "ZV" },
+
+       /* Line In connected to Line2 */
+
+       { "LINE2L", NULL, "Line In" },
+       { "LINE2R", NULL, "Line In" },
+
+       /* Microphone connected to MIC3R and MIC_BIAS */
+
+       { "MIC3L", NULL, "Mic Jack" },
+
+       /* GSM connected to MONO_LOUT and MIC3L (in) */
+
+       { "GSM Out", NULL, "MONO_LOUT" },
+       { "MIC3L", NULL, "GSM In" },
+
+       /* Speaker is connected to LINEOUT{LN,LP,RN,RP}, however we are
+        * not using the DAPM to power it up and down as there it makes
+        * a click when powering up. */
+};
+
+/**
+ * simtec_hermes_init - initialise and add controls
+ * @codec; The codec instance to attach to.
+ *
+ * Attach our controls and configure the necessary codec
+ * mappings for our sound card instance.
+*/
+static int simtec_hermes_init(struct snd_soc_codec *codec)
+{
+       snd_soc_dapm_new_controls(codec, dapm_widgets,
+                                 ARRAY_SIZE(dapm_widgets));
+
+       snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map));
+
+       snd_soc_dapm_enable_pin(codec, "Headphone Jack");
+       snd_soc_dapm_enable_pin(codec, "Line In");
+       snd_soc_dapm_enable_pin(codec, "Line Out");
+       snd_soc_dapm_enable_pin(codec, "Mic Jack");
+
+       simtec_audio_init(codec);
+       snd_soc_dapm_sync(codec);
+
+       return 0;
+}
+
+static struct aic3x_setup_data codec_setup = {
+};
+
+static struct snd_soc_dai_link simtec_dai_aic33 = {
+       .name           = "tlv320aic33",
+       .stream_name    = "TLV320AIC33",
+       .cpu_dai        = &s3c24xx_i2s_dai,
+       .codec_dai      = &aic3x_dai,
+       .init           = simtec_hermes_init,
+};
+
+/* simtec audio machine driver */
+static struct snd_soc_card snd_soc_machine_simtec_aic33 = {
+       .name           = "Simtec-Hermes",
+       .platform       = &s3c24xx_soc_platform,
+       .dai_link       = &simtec_dai_aic33,
+       .num_links      = 1,
+};
+
+/* simtec audio subsystem */
+static struct snd_soc_device simtec_snd_devdata_aic33 = {
+       .card           = &snd_soc_machine_simtec_aic33,
+       .codec_dev      = &soc_codec_dev_aic3x,
+       .codec_data     = &codec_setup,
+};
+
+static int __devinit simtec_audio_hermes_probe(struct platform_device *pd)
+{
+       dev_info(&pd->dev, "probing....\n");
+       return simtec_audio_core_probe(pd, &simtec_snd_devdata_aic33);
+}
+
+static struct platform_driver simtec_audio_hermes_platdrv = {
+       .driver = {
+               .owner  = THIS_MODULE,
+               .name   = "s3c24xx-simtec-hermes-snd",
+               .pm     = simtec_audio_pm,
+       },
+       .probe  = simtec_audio_hermes_probe,
+       .remove = __devexit_p(simtec_audio_remove),
+};
+
+MODULE_ALIAS("platform:s3c24xx-simtec-hermes-snd");
+
+static int __init simtec_hermes_modinit(void)
+{
+       return platform_driver_register(&simtec_audio_hermes_platdrv);
+}
+
+static void __exit simtec_hermes_modexit(void)
+{
+       platform_driver_unregister(&simtec_audio_hermes_platdrv);
+}
+
+module_init(simtec_hermes_modinit);
+module_exit(simtec_hermes_modexit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio support");
+MODULE_LICENSE("GPL");