#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/clk/versaclock.h>
/ {
- aliases {
- serial0 = &scif2;
- serial1 = &hscif0;
- serial2 = &hscif1;
- serial3 = &scif0;
- serial4 = &hscif2;
- serial5 = &scif5;
- spi0 = &msiof0;
- spi1 = &msiof1;
- spi2 = &msiof2;
- spi3 = &msiof3;
- ethernet0 = &avb;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- backlight: backlight {
+ backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
power-supply = <®_lcd>;
enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>;
- pwms = <&pwm0 0 50000>;
+ pwms = <&pwm2 0 25000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
+ backlight_dpi: backlight-dpi {
+ compatible = "pwm-backlight";
+ power-supply = <®_lcd>;
+ enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>;
+ pwms = <&pwm0 0 25000>;
+ brightness-levels = <0 25 33 50 63 75 88 100>;
+ default-brightness-level = <6>;
+ };
+
hdmi0-out {
compatible = "hdmi-connector";
type = "a";
keys {
compatible = "gpio-keys";
- key-1 {
+ key-1 { /* S19 */
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_1>;
- label = "Switch-1";
+ linux,code = <KEY_UP>;
+ label = "Up";
wakeup-source;
debounce-interval = <20>;
};
- key-2 {
+ key-2 { /*S20 */
gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_2>;
- label = "Switch-2";
+ linux,code = <KEY_LEFT>;
+ label = "Left";
wakeup-source;
debounce-interval = <20>;
};
- key-3 {
+ key-3 { /* S21 */
gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_3>;
- label = "Switch-3";
+ linux,code = <KEY_DOWN>;
+ label = "Down";
wakeup-source;
debounce-interval = <20>;
};
- key-4 {
+ key-4 { /* S22 */
gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_4>;
- label = "Switch-4";
+ linux,code = <KEY_RIGHT>;
+ label = "Right";
wakeup-source;
debounce-interval = <20>;
};
- key-5 {
+ key-5 { /* S23 */
gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_5>;
- label = "Switch-4";
+ linux,code = <KEY_ENTER>;
+ label = "Center";
wakeup-source;
debounce-interval = <20>;
};
led1 {
gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
label = "LED1";
- linux,default-trigger = "heartbeat";
};
led2 {
gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
label = "LED2";
- linux,default-trigger = "heartbeat";
};
led3 {
gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
label = "LED3";
- linux,default-trigger = "heartbeat";
+ };
+ };
+
+ lvds {
+ compatible = "panel-lvds";
+ power-supply = <®_lcd_reset>;
+ width-mm = <223>;
+ height-mm = <125>;
+ backlight = <&backlight_lvds>;
+ data-mapping = "vesa-24";
+
+ panel-timing {
+ /* 800x480@60Hz */
+ clock-frequency = <30000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hsync-len = <48>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ vfront-porch = <13>;
+ vback-porch = <29>;
+ vsync-len = <1>;
+ hsync-active = <1>;
+ vsync-active = <3>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ rgb {
+ /* Different LCD with compatible timings */
+ compatible = "rocktech,rk070er9427";
+ backlight = <&backlight_dpi>;
+ enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ power-supply = <®_lcd>;
+ port {
+ rgb_panel: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
};
};
regulator-name = "audio-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio_exp2 7 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio_exp4 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
-
regulator-name = "SDHI0 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
-
gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1>, <1800000 0>;
- regulator-always-on;
};
/* External DU dot clocks */
#clock-cells = <0>;
clock-frequency = <25000000>;
};
-};
-&audio_clk_a {
- clock-frequency = <22579200>;
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ hs_ep: endpoint {
+ remote-endpoint = <&usb3_hs_ep>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ ss_ep: endpoint {
+ remote-endpoint = <&hd3ss3220_in_ep>;
+ };
+ };
+ };
+ };
};
&audio_clk_b {
status = "okay";
};
-&du {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>,
- <&cpg CPG_MOD 722>,
- <&versaclock5 1>,
- <&x302_clk>,
- <&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2",
- "dclkin.0", "dclkin.1", "dclkin.2";
+&du_out_rgb {
+ remote-endpoint = <&rgb_panel>;
};
&ehci0 {
dr_mode = "otg";
status = "okay";
- clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&versaclock5 3>, <&versaclock6_bb 4>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&versaclock5 3>;
};
&ehci1 {
status = "okay";
- clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&versaclock5 4>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
};
&hdmi0 {
};
};
port@2 {
- /* HDMI sound */
reg = <2>;
dw_hdmi0_snd_in: endpoint {
remote-endpoint = <&rsnd_endpoint1>;
&i2c2 {
status = "okay";
- clock-frequency = <100000>;
+ clock-frequency = <400000>;
pinctrl-0 = <&i2c2_pins>;
pinctrl-names = "default";
#gpio-cells = <2>;
};
- versaclock6_bb: versaclock6_bb@6a {
+ gpio_exp4: gpio@23 {
+ compatible = "onnn,pca9654";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ versaclock6_bb: clock-controller@6a {
compatible = "idt,5p49v6965";
reg = <0x6a>;
#clock-cells = <1>;
clocks = <&x304_clk>;
clock-names = "xin";
- /* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */
+
assigned-clocks = <&versaclock6_bb 1>,
<&versaclock6_bb 2>,
<&versaclock6_bb 3>,
<&versaclock6_bb 4>;
- assigned-clock-rates = <24000000>, <24000000>, <24000000>, <24000000>;
+ assigned-clock-rates = <24000000>, <24000000>, <24000000>, <24576000>;
+
+ OUT1 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT2 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT3 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <3300000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT4 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <3300000>;
+ idt,slew-percent = <100>;
+ };
};
};
&i2c5 {
status = "okay";
- clock-frequency = <100000>;
+ clock-frequency = <400000>;
pinctrl-0 = <&i2c5_pins>;
pinctrl-names = "default";
codec: wm8962@1a {
compatible = "wlf,wm8962";
reg = <0x1a>;
+ clocks = <&versaclock6_bb 3>;
DCVDD-supply = <®_audio>;
DBVDD-supply = <®_audio>;
AVDD-supply = <®_audio>;
interrupts = <9 IRQ_TYPE_EDGE_RISING>;
wakeup-source;
};
+
+ hd3ss3220@47 {
+ compatible = "ti,hd3ss3220";
+ reg = <0x47>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ hd3ss3220_in_ep: endpoint {
+ remote-endpoint = <&ss_ep>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ hd3ss3220_out_ep: endpoint {
+ remote-endpoint = <&usb3_role_switch>;
+ };
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&msiof1 {
+ pinctrl-0 = <&msiof1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
};
&ohci0 {
function = "pwm0";
};
+ pwm2_pins: pwm2 {
+ groups = "pwm2_a";
+ function = "pwm2";
+ };
+
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
};
sound_clk_pins: sound_clk {
- groups = "audio_clk_a_a";
+ groups = "audio_clk_a_a", "audio_clk_b_a";
function = "audio_clk";
};
status = "okay";
};
+&pwm2 {
+ pinctrl-0 = <&pwm2_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&rcar_sound {
pinctrl-0 = <&sound_pins &sound_clk_pins>;
pinctrl-names = "default";
status = "okay";
- clocks = <&cpg CPG_MOD 1005>,
- <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
- <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
- <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
- <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
- <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
- <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
- <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
- <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
- <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
- <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
- <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
- <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
- <&cpg CPG_CORE R8A774A1_CLK_S0D4>;
-
ports {
#address-cells = <1>;
#size-cells = <0>;
};
};
+&rwdt {
+ status = "okay";
+ timeout-sec = <60>;
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
shared-pin;
};
+&tmu0 {
+ status = "okay";
+};
+
+&tmu1 {
+ status = "okay";
+};
+
+&tmu2 {
+ status = "okay";
+};
+
+&tmu3 {
+ status = "okay";
+};
+
+&tmu4 {
+ status = "okay";
+};
+
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
pinctrl-names = "default";
status = "okay";
};
+
+&usb3_peri0 {
+ companion = <&xhci0>;
+ status = "okay";
+ usb-role-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ usb3_hs_ep: endpoint {
+ remote-endpoint = <&hs_ep>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ usb3_role_switch: endpoint {
+ remote-endpoint = <&hd3ss3220_out_ep>;
+ };
+ };
+ };
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&vin0 {
+ status = "okay";
+};
+&vin1 {
+ status = "okay";
+};
+&vin2 {
+ status = "okay";
+};
+&vin3 {
+ status = "okay";
+};
+&vin4 {
+ status = "okay";
+};
+&vin5 {
+ status = "okay";
+};
+&vin6 {
+ status = "okay";
+};
+&vin7 {
+ status = "okay";
+};
+
+&xhci0
+{
+ pinctrl-0 = <&usb30_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/versaclock.h>
/ {
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
- reg = <0x0 0x48000000 0x0 0x78000000>;
+ reg = <0x0 0x48000000 0x0 0xc000000>;
};
- memory@600000000 {
+ memory@57000000 {
device_type = "memory";
- reg = <0x6 0x00000000 0x0 0x80000000>;
+ reg = <0x0 0x57000000 0x0 0x29000000>;
};
osc_32k: osc_32k {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
phy-handle = <&phy0>;
- phy-mode = "rgmii-id";
+ rx-internal-delay-ps = <1800>;
+ tx-internal-delay-ps = <2000>;
status = "okay";
phy0: ethernet-phy@0 {
pinctrl-names = "default";
uart-has-rtscts;
status = "okay";
- max-speed = <4000000>;
bluetooth {
compatible = "brcm,bcm43438-bt";
device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>;
clocks = <&osc_32k>;
clock-names = "extclk";
+ max-speed = <4000000>;
};
};
&i2c4 {
status = "okay";
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
pca9654: gpio@20 {
compatible = "onnn,pca9654";
};
eeprom@50 {
- compatible = "microchip, at24c64", "atmel,24c64";
+ compatible = "microchip,at24c64", "atmel,24c64";
pagesize = <32>;
read-only; /* Manufacturing EEPROM programmed at factory */
reg = <0x50>;
<&versaclock5 2>,
<&versaclock5 3>,
<&versaclock5 4>;
+
assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>;
+
+ OUT1 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT2 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT3 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT4 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <3300000>;
+ idt,slew-percent = <100>;
+ };
};
};
status = "okay";
};
-&usb_extal_clk {
- clock-frequency = <50000000>;
+&usb2_clksel {
+ status = "okay";
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+ <&versaclock5 3>, <&usb3s0_clk>;
+ clock-names = "ehci_ohci", "hs-usb-if",
+ "usb_extal", "usb_xtal";
};
&usb3s0_clk {
clock-frequency = <100000000>;
};
-
-&vspb {
- status = "okay";
-};
-
-&vspi0 {
- status = "okay";
-};
#include "beacon-renesom-baseboard.dtsi"
/ {
- model = "Beacon Embedded Works RZ/G2M Development Kit";
- compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1";
+ model = "Beacon EmbeddedWorks RZ/G2M Development Kit";
+ compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1";
+
+ aliases {
+ serial0 = &scif2;
+ serial1 = &hscif0;
+ serial2 = &hscif1;
+ serial3 = &scif0;
+ serial4 = &hscif2;
+ serial5 = &scif5;
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x80000000>;
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&versaclock5 1>,
+ <&x302_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2",
+ "dclkin.0", "dclkin.1", "dclkin.2";
+};
+
+/* Reference versaclock instead of audio_clk_a */
+&rcar_sound {
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&versaclock6_bb 4>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A774A1_CLK_S0D4>;
};
resets = <&cpg 905>;
};
- pfc: pin-controller@e6060000 {
+ pfc: pinctrl@e6060000 {
compatible = "renesas,pfc-r8a774a1";
reg = <0 0xe6060000 0 0x50c>;
};
status = "disabled";
};
+ usb2_clksel: clock-controller@e6590630 {
+ compatible = "renesas,r8a774a1-rcar-usb2-clock-sel",
+ "renesas,rcar-gen3-usb2-clock-sel";
+ reg = <0 0xe6590630 0 0x02>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+ <&usb_extal_clk>, <&usb3s0_clk>;
+ clock-names = "ehci_ohci", "hs-usb-if",
+ "usb_extal", "usb_xtal";
+ #clock-cells = <0>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
+ reset-names = "ehci_ohci", "hs-usb-if";
+ status = "disabled";
+ };
+
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a774a1-usb-dmac",
"renesas,usb-dmac";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ rx-internal-delay-ps = <0>;
+ tx-internal-delay-ps = <0>;
iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a774a1-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x4000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ clock-names = "rpc";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
status = "disabled";
};
+ pciec0_ep: pcie-ep@fe000000 {
+ compatible = "renesas,r8a774a1-pcie-ep",
+ "renesas,rcar-gen3-pcie-ep";
+ reg = <0x0 0xfe000000 0 0x80000>,
+ <0x0 0xfe100000 0 0x100000>,
+ <0x0 0xfe200000 0 0x200000>,
+ <0x0 0x30000000 0 0x8000000>,
+ <0x0 0x38000000 0 0x8000000>;
+ reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>;
+ clock-names = "pcie";
+ resets = <&cpg 319>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ pciec1_ep: pcie-ep@ee800000 {
+ compatible = "renesas,r8a774a1-pcie-ep",
+ "renesas,rcar-gen3-pcie-ep";
+ reg = <0x0 0xee800000 0 0x80000>,
+ <0x0 0xee900000 0 0x100000>,
+ <0x0 0xeea00000 0 0x200000>,
+ <0x0 0xc0000000 0 0x8000000>,
+ <0x0 0xc8000000 0 0x8000000>;
+ reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 318>;
+ clock-names = "pcie";
+ resets = <&cpg 318>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
fdp1@fe940000 {
compatible = "renesas,fdp1";
reg = <0 0xfe940000 0 0x2400>;
projects / platform / kernel / u-boot.git / commitdiff