AC_DECL_YYTEXT.
* configure: Rebuild with new automake and libtool.
* aclocal.m4, Makefile.in: Likewise.
* doc/Makefile.am (as.dvi): New target.
* doc/Makefile.in: Rebuild.
+Tue Apr 21 16:18:12 1998 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Call AM_PROG_LEX rather than AC_PROG_LEX and
+ AC_DECL_YYTEXT.
+ * configure: Rebuild with new automake and libtool.
+ * aclocal.m4, Makefile.in: Likewise.
+
+ * doc/Makefile.am (as.dvi): New target.
+ * doc/Makefile.in: Rebuild.
+
+start-sanitize-sky
+Mon Apr 20 12:49:33 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * config/tc-dvp.c (VU_LABEL_PREFIX): Make "_$".
+
+end-sanitize-sky
Sat Apr 18 01:21:04 1998 Stan Cox <scox@cygnus.com>
* configure.in: Added sparc86x support.
-# Makefile.in generated automatically by automake 1.2e from Makefile.am
+# Makefile.in generated automatically by automake 1.3 from Makefile.am
# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
includedir = @includedir@
oldincludedir = /usr/include
+DISTDIR =
+
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
target_alias = @target_alias@
target_triplet = @target@
ALL_OBJ_DEPS = @ALL_OBJ_DEPS@
+AS = @AS@
BFDLIB = @BFDLIB@
CC = @CC@
+DLLTOOL = @DLLTOOL@
EXEEXT = @EXEEXT@
LD = @LD@
LIBTOOL = @LIBTOOL@
DEP_FILE_DEPS = $(CFILES) $(HFILES) $(TARGET_CPU_CFILES) \
$(TARGET_CPU_HFILES) $(OBJ_FORMAT_CFILES) $(OBJ_FORMAT_HFILES)
-# IF YOU PUT ANYTHING HERE IT WILL GO AWAY
TCDEP_a29k_aout = $(srcdir)/config/obj-aout.h $(srcdir)/config/tc-a29k.h \
$(BFDDIR)/libaout.h $(INCDIR)/bfdlink.h $(INCDIR)/opcode/a29k.h
TCDEP_a29k_coff = $(srcdir)/config/obj-coff.h $(srcdir)/config/tc-a29k.h \
$(INCDIR)/opcode/i960.h
TCDEP_m32r_coff = $(srcdir)/config/obj-coff.h $(srcdir)/config/tc-m32r.h \
$(INCDIR)/coff/internal.h $(BFDDIR)/libcoff.h $(INCDIR)/bfdlink.h \
- subsegs.h $(INCDIR)/obstack.h cgen-opc.h $(srcdir)/../opcodes/m32r-opc.h \
- $(INCDIR)/opcode/cgen.h
+ subsegs.h $(INCDIR)/obstack.h $(INCDIR)/symcat.h cgen-opc.h \
+ $(srcdir)/../opcodes/m32r-opc.h $(INCDIR)/opcode/cgen.h
TCDEP_m32r_elf = $(srcdir)/config/obj-elf.h $(BFDDIR)/elf-bfd.h \
$(INCDIR)/elf/common.h $(INCDIR)/elf/internal.h $(INCDIR)/elf/external.h \
$(INCDIR)/bfdlink.h $(srcdir)/config/tc-m32r.h subsegs.h \
- $(INCDIR)/obstack.h cgen-opc.h $(srcdir)/../opcodes/m32r-opc.h \
+ $(INCDIR)/obstack.h $(INCDIR)/symcat.h cgen-opc.h $(srcdir)/../opcodes/m32r-opc.h \
$(INCDIR)/opcode/cgen.h
TCDEP_m68k_aout = $(srcdir)/config/obj-aout.h $(srcdir)/config/tc-m68k.h \
$(BFDDIR)/libaout.h $(INCDIR)/bfdlink.h $(INCDIR)/obstack.h \
$(INCDIR)/elf/common.h $(INCDIR)/elf/internal.h $(INCDIR)/elf/external.h \
$(INCDIR)/bfdlink.h $(srcdir)/config/tc-alpha.h subsegs.h \
$(INCDIR)/obstack.h ecoff.h $(INCDIR)/coff/sym.h $(INCDIR)/coff/ecoff.h \
- $(INCDIR)/aout/aout64.h
+ $(INCDIR)/elf/alpha.h $(INCDIR)/aout/aout64.h
OBJDEP_alpha_evax = $(srcdir)/config/obj-evax.h $(srcdir)/config/tc-alpha.h
OBJDEP_arc_coff = $(srcdir)/config/obj-coff.h $(srcdir)/config/tc-arc.h \
$(INCDIR)/coff/internal.h $(BFDDIR)/libcoff.h $(INCDIR)/bfdlink.h \
SOURCES = $(itbl_test_SOURCES) $(as_new_SOURCES) $(EXTRA_as_new_SOURCES) $(gasp_new_SOURCES)
OBJECTS = $(itbl_test_OBJECTS) $(as_new_OBJECTS) $(gasp_new_OBJECTS)
-default: all
+all: all-recursive-am all-am
.SUFFIXES:
.SUFFIXES: .S .c .l .lo .o .s .y
-$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
uninstall: uninstall-recursive
-all: all-recursive-am all-am
-
install-strip:
$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
installdirs: installdirs-recursive
@echo "it deletes files that may require special tools to rebuild."
-rm -f config.status
-.PHONY: default mostlyclean-hdr distclean-hdr clean-hdr \
-maintainer-clean-hdr mostlyclean-noinstPROGRAMS \
-distclean-noinstPROGRAMS clean-noinstPROGRAMS \
-maintainer-clean-noinstPROGRAMS mostlyclean-compile distclean-compile \
-clean-compile maintainer-clean-compile mostlyclean-libtool \
-distclean-libtool clean-libtool maintainer-clean-libtool \
-install-data-recursive uninstall-data-recursive install-exec-recursive \
+.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
+mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \
+clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \
+mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile mostlyclean-libtool distclean-libtool \
+clean-libtool maintainer-clean-libtool install-data-recursive \
+uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
echo '' > itbl-cpu.h; \
echo '# DO NOT DELETE THIS LINE -- mkdep uses it.' > .dep; \
$(DEP) -f .dep -DBFD_ASSEMBLER -I. -I.. -I$${srcdir} -I../../bfd $(DEP_INCLUDES) $?
- mv -f .depdir/.dep .dep1
+ sed -e '/IF YOU PUT ANYTHING/,$$d' < .depdir/.dep > .dep1
+ rm -f .depdir/.dep
# Work out the special dependencies for the tc-*.c files.
.tcdep: $(TARGET_CPU_CFILES)
else true; fi; \
done; \
done
- echo 'TCDEP_hppa_som = $(srcdir)/config/tc-hppa.h subsegs.h \' >> .tcdepa
- echo ' $(INCDIR)/obstack.h $(BFDDIR)/libhppa.h \' >> .tcdepa
- echo ' $(INCDIR)/opcode/hppa.h $(BFDDIR)/som.h' >> .tcdepa
+ echo 'TCDEP_hppa_som = $$(srcdir)/config/tc-hppa.h subsegs.h \' >> .tcdepa
+ echo ' $$(INCDIR)/obstack.h $$(BFDDIR)/libhppa.h \' >> .tcdepa
+ echo ' $$(INCDIR)/opcode/hppa.h $$(BFDDIR)/som.h' >> .tcdepa
# We don't try to handle all multi cases.
for c in $(CPU_TYPES); do \
$(CPU_MULTI_VALID) \
else true; fi; \
done; \
done
- echo 'OBJDEP_hppa_som = $(srcdir)/config/obj-som.h subsegs.h \' >> .objdepa
- echo ' $(INCDIR)/obstack.h $(BFDDIR)/libhppa.h \' >> .objdepa
- echo ' $(BFDDIR)/som.h $(INCDIR)/aout/stab_gnu.h \' >> .objdepa
- echo ' $(INCDIR)/aout/stab.def' >> .objdepa
+ echo 'OBJDEP_hppa_som = $$(srcdir)/config/obj-som.h subsegs.h \' >> .objdepa
+ echo ' $$(INCDIR)/obstack.h $$(BFDDIR)/libhppa.h \' >> .objdepa
+ echo ' $$(BFDDIR)/som.h $$(INCDIR)/aout/stab_gnu.h \' >> .objdepa
+ echo ' $$(INCDIR)/aout/stab.def' >> .objdepa
# We don't try to handle all multi cases.
for c in $(CPU_TYPES); do \
$(CPU_MULTI_VALID) \
else true; fi; \
done; \
done
- echo 'DEP_hppa_som = $(srcdir)/../bfd/som.h' >> .dep2a
+ echo 'DEP_hppa_som = $$(BFDDIR)/som.h' >> .dep2a
# We don't try to handle all multi cases.
for c in $(CPU_TYPES); do \
$(CPU_MULTI_VALID) \
mv -f .dep2a .dep2
dep.sed: dep-in.sed config.status
+ srcdir=`cd $(srcdir); pwd`; \
sed <$(srcdir)/dep-in.sed >dep.sed \
- -e 's!@INCDIR@!$(INCDIR)!' \
- -e 's!@BFDDIR@!$(BFDDIR)!' \
- -e 's!@SRCDIR@!$(srcdir)!'
+ -e "s!@INCDIR@!$${srcdir}/../include!" \
+ -e "s!@BFDDIR@!$${srcdir}/../bfd!" \
+ -e "s!@SRCDIR@!$${srcdir}!"
dep: .dep
sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < Makefile > tmp-Makefile
-dnl aclocal.m4 generated automatically by aclocal 1.2
+dnl aclocal.m4 generated automatically by aclocal 1.3
+
+dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+dnl This Makefile.in is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
dnl GAS_CHECK_DECL_NEEDED(name, typedefname, typedef, headers)
AC_DEFUN(GAS_CHECK_DECL_NEEDED,[
ifelse([$3],,
AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
AC_DEFINE_UNQUOTED(VERSION, "$VERSION"))
-AM_SANITY_CHECK
-AC_ARG_PROGRAM
+AC_REQUIRE([AM_SANITY_CHECK])
+AC_REQUIRE([AC_ARG_PROGRAM])
dnl FIXME This is truly gross.
missing_dir=`cd $ac_aux_dir && pwd`
AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_PROG_MAKE_SET])
+AC_REQUIRE([AC_PROG_MAKE_SET])])
# serial 1
# directory).
if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
- if test "$@" = "X"; then
+ if test "[$]*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
+ if test "[$]*" != "X $srcdir/configure conftestfile" \
+ && test "[$]*" != "X conftestfile $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
test "[$]2" = conftestfile
)
then
AC_SUBST($1)])
-# serial 18 AM_PROG_LIBTOOL
+# serial 24 AM_PROG_LIBTOOL
AC_DEFUN(AM_PROG_LIBTOOL,
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_RANLIB])
-AC_REQUIRE([AC_PROG_CC])
-AC_REQUIRE([AM_PROG_LD])
-AC_REQUIRE([AM_PROG_NM])
-AC_REQUIRE([AC_PROG_LN_S])
-
+[AC_REQUIRE([AM_ENABLE_SHARED])dnl
+AC_REQUIRE([AM_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_RANLIB])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AM_PROG_LD])dnl
+AC_REQUIRE([AM_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+dnl
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)
+AC_SUBST(LIBTOOL)dnl
-dnl CYGNUS LOCAL arguments to enable-shared
-dnl Allow the --disable-shared flag to stop us from building shared libs.
-AC_ARG_ENABLE(shared,
-[ --enable-shared build shared libraries [default=yes]],
-[p=${PACKAGE-bogus-package-name}
- case "$enableval" in
- yes) libtool_enable_shared=yes ;;
- no) libtool_enable_shared=no ;;
- # The value of $p (aka $PACKAGE) is assumed to come from AM_INIT_AUTOMAKE.
- # If it didn't, it'll be `bogus-package-name', thus making this condition
- # not be used.
- *$p*) libtool_enable_shared=yes ;;
- *) libtool_enable_shared=no ;;
-esac])
-test -n "$libtool_enable_shared" && enable_shared="$libtool_enable_shared"
-libtool_shared=
-test "$enable_shared" = no && libtool_shared=" --disable-shared"
-dnl END CYGNUS LOCAL
-
-dnl Allow the --disable-static flag to stop us from building static libs.
-AC_ARG_ENABLE(static,
-[ --enable-static build static libraries [default=yes]],
-[if test "$enableval" = no; then
- libtool_enable_static=no
-else
- libtool_enable_static=yes
-fi])
-test -n "$libtool_enable_static" && enable_static="$libtool_enable_static"
-libtool_static=
-test "$enable_static" = no && libtool_static=" --disable-static"
-
-libtool_flags="$libtool_shared$libtool_static"
+# Check for any special flags to pass to ltconfig.
+libtool_flags=
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-[case "$host" in
+case "$host" in
*-*-irix6*)
- ac_save_CFLAGS="$CFLAGS"
- flag_passed=no
- for f in -32 -64 -n32 ABI -cckr -mips1 -mips2 -mips3 -mips4; do
- case "$f" in
- ABI)
- test -n "$SGI_ABI" && flag_passed=yes
- if test "$flag_passed" = no && test "$ac_cv_prog_gcc" = yes; then
- # Choose the ABI flag according to GCC's specs.
- if $CC -dumpspecs 2>&1 | sed '/^\*link:$/,/^$/!d' | egrep -e '[ ]-32' >/dev/null; then
- LD="${LD-ld} -32"
- else
- LD="${LD-ld} -n32"
- fi
- fi
+ # Find out which ABI we are using.
+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ LD="${LD-ld} -32"
;;
-
- *)
- if echo " $CC $CFLAGS " | egrep -e "[ ]$f[ ]" > /dev/null; then
- flag_passed=yes
- LD="${LD-ld} $f"
- fi
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
;;
esac
- done
- CFLAGS="$ac_save_CFLAGS"
+ fi
+ rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
CFLAGS="$CFLAGS -belf"
;;
-esac]
+
+*-*-cygwin32*)
+ AM_SYS_LIBTOOL_CYGWIN32
+ ;;
+
+esac
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
+DLLTOOL="$DLLTOOL" AS="$AS" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| AC_MSG_ERROR([libtool configure failed])
])
+# AM_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AM_ENABLE_SHARED[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AM_ENABLE_SHARED,
+[define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<< --enable-shared build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT]
+changequote([, ])dnl
+[ --enable-shared=PKGS only build shared libraries if the current package
+ appears as an element in the PKGS list],
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AM_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN(AM_DISABLE_SHARED,
+[AM_ENABLE_SHARED(no)])
+
+# AM_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN(AM_DISABLE_STATIC,
+[AM_ENABLE_STATIC(no)])
+
+# AM_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AM_ENABLE_STATIC[(DEFAULT)]
+# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
+# `yes'.
+AC_DEFUN(AM_ENABLE_STATIC,
+[define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<< --enable-static build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT]
+changequote([, ])dnl
+[ --enable-static=PKGS only build shared libraries if the current package
+ appears as an element in the PKGS list],
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac],
+enable_static=AM_ENABLE_STATIC_DEFAULT)dnl
+])
+
+
# AM_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AM_PROG_LD,
[AC_ARG_WITH(gnu-ld,
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
- /*)
+changequote(,)dnl
+ /* | [A-Za-z]:\\*)
+changequote([,])dnl
test -z "$LD" && LD="$ac_prog"
;;
"")
AC_DEFUN(AM_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
-[case "$NM" in
-/*)
- ac_cv_path_NM="$NM" # Let the user override the test with a path.
- ;;
-*)
+[if test -z "$NM"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
- test -z "$ac_dir" && dir=.
+ test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm; then
# Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1!d' prevents false positives on HP-UX, which says:
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1!d'; exit 0) | egrep /dev/null >/dev/null; then
+ if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1!d'; exit 0) | egrep /dev/null >/dev/null; then
+ elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
else
ac_cv_path_NM="$ac_dir/nm"
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
- ;;
-esac])
+else
+ ac_cv_path_NM="$NM" # Let the user override the test with a path.
+fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
AC_SUBST(NM)
])
+# AM_SYS_LIBTOOL_CYGWIN32 - find tools needed on cygwin32
+AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN32,
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+AC_CHECK_TOOL(AS, as, false)
+])
+
# Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER,
done<<>>dnl>>)
changequote([,]))])
+
+dnl AM_PROG_LEX
+dnl Look for flex, lex or missing, then run AC_PROG_LEX and AC_DECL_YYTEXT
+AC_DEFUN(AM_PROG_LEX,
+[missing_dir=ifelse([$1],,`cd $ac_aux_dir && pwd`,$1)
+AC_CHECK_PROGS(LEX, flex lex, "$missing_dir/missing flex")
+AC_PROG_LEX
+AC_DECL_YYTEXT])
+
# Add --enable-maintainer-mode option to configure.
# From Jim Meyering
[AC_REQUIRE([AM_CYGWIN32])
AC_REQUIRE([AM_MINGW32])
AC_MSG_CHECKING([for executable suffix])
-AC_CACHE_VAL(am_cv_exeext,[
-if test "$CYGWIN32" = yes -o "$MINGW32" = yes; then
+AC_CACHE_VAL(am_cv_exeext,
+[if test "$CYGWIN32" = yes || test "$MINGW32" = yes; then
am_cv_exeext=.exe
else
cat > am_c_test.c << 'EOF'
}
EOF
${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
-am_cv_exeext=`echo am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//`
+am_cv_exeext=
+for file in am_c_test.*; do
+ case $file in
+ *.c) ;;
+ *.o) ;;
+ *) am_cv_exeext=`echo $file | sed -e s/am_c_test//` ;;
+ esac
+done
rm -f am_c_test*])
test x"${am_cv_exeext}" = x && am_cv_exeext=no
fi
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- case "$NM" in
-/* | [A-Za-z]:\\*)
- ac_cv_path_NM="$NM" # Let the user override the test with a path.
- ;;
-*)
+ if test -z "$NM"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
test -z "$ac_dir" && ac_dir=.
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
- ;;
-esac
+else
+ ac_cv_path_NM="$NM" # Let the user override the test with a path.
+fi
fi
NM="$ac_cv_path_NM"
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1255: checking whether ln -s works" >&5
+echo "configure:1252: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
+fi
+
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
case "$host" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1291 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1292: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1294 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1295: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
CFLAGS="$CFLAGS -belf"
;;
+
+*-*-cygwin32*)
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1320: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+DLLTOOL="$ac_cv_prog_DLLTOOL"
+if test -n "$DLLTOOL"; then
+ echo "$ac_t""$DLLTOOL" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_DLLTOOL"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1351: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_DLLTOOL="dlltool"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
+fi
+fi
+DLLTOOL="$ac_cv_prog_DLLTOOL"
+if test -n "$DLLTOOL"; then
+ echo "$ac_t""$DLLTOOL" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ DLLTOOL="false"
+fi
+fi
+
+# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1385: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS="${ac_tool_prefix}as"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+ echo "$ac_t""$AS" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_AS"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1416: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS="as"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+ echo "$ac_t""$AS" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ AS="false"
+fi
+fi
+
+
+ ;;
+
esac
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
+DLLTOOL="$DLLTOOL" AS="$AS" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2065: checking for $ac_word" >&5
+echo "configure:2205: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2094: checking for $ac_word" >&5
+echo "configure:2234: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2142: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2282: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 2152 "configure"
+#line 2292 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2156: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2296: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2176: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2316: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2181: checking whether we are using GNU C" >&5
+echo "configure:2321: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2190: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2330: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2205: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2345: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2238: checking for $ac_word" >&5
+echo "configure:2378: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
done
test -n "$YACC" || YACC="yacc"
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:2408: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 2423 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2429: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 2440 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2446: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+missing_dir=`cd $ac_aux_dir && pwd`
+for ac_prog in flex lex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2474: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_LEX="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+ echo "$ac_t""$LEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+test -n "$LEX" && break
+done
+test -n "$LEX" || LEX=""$missing_dir/missing flex""
+
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2270: checking for $ac_word" >&5
+echo "configure:2506: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:2303: checking for yywrap in -l$ac_lib" >&5
+echo "configure:2539: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2311 "configure"
+#line 2547 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:2322: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2558: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2345: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
- cat > conftest.$ac_ext <<EOF
-#line 2360 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2366: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -E -traditional-cpp"
- cat > conftest.$ac_ext <<EOF
-#line 2377 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2383: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
- ac_cv_prog_CPP="$CPP"
-fi
- CPP="$ac_cv_prog_CPP"
-else
- ac_cv_prog_CPP="$CPP"
-fi
-echo "$ac_t""$CPP" 1>&6
-
echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:2406: checking lex output file root" >&5
+echo "configure:2581: checking lex output file root" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:2427: checking whether yytext is a pointer" >&5
+echo "configure:2602: checking whether yytext is a pointer" >&5
if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LEXLIB"
cat > conftest.$ac_ext <<EOF
-#line 2439 "configure"
+#line 2614 "configure"
#include "confdefs.h"
`cat $LEX_OUTPUT_ROOT.c`
int main() {
; return 0; }
EOF
-if { (eval echo configure:2446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2621: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_cv_prog_lex_yytext_pointer=yes
else
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:2469: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:2644: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6
-echo "configure:2487: checking for Cygwin32 environment" >&5
+echo "configure:2662: checking for Cygwin32 environment" >&5
if eval "test \"`echo '$''{'am_cv_cygwin32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2492 "configure"
+#line 2667 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN32__;
; return 0; }
EOF
-if { (eval echo configure:2499: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2674: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
am_cv_cygwin32=yes
else
CYGWIN32=
test "$am_cv_cygwin32" = yes && CYGWIN32=yes
echo $ac_n "checking for Mingw32 environment""... $ac_c" 1>&6
-echo "configure:2516: checking for Mingw32 environment" >&5
+echo "configure:2691: checking for Mingw32 environment" >&5
if eval "test \"`echo '$''{'am_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2521 "configure"
+#line 2696 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:2528: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2703: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
am_cv_mingw32=yes
else
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2547: checking for executable suffix" >&5
+echo "configure:2722: checking for executable suffix" >&5
if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
}
EOF
${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
-am_cv_exeext=`echo am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//`
+am_cv_exeext=
+for file in am_c_test.*; do
+ case $file in
+ *.c) ;;
+ *.o) ;;
+ *) am_cv_exeext=`echo $file | sed -e s/am_c_test//` ;;
+ esac
+done
rm -f am_c_test*
fi
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2575: checking for $ac_hdr" >&5
+echo "configure:2757: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2580 "configure"
+#line 2762 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2585: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2767: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
# Put this here so that autoconf's "cross-compiling" message doesn't confuse
# people who are not cross-compiling but are compiling cross-assemblers.
echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
-echo "configure:2615: checking whether compiling a cross-assembler" >&5
+echo "configure:2797: checking whether compiling a cross-assembler" >&5
if test "${host}" = "${target}"; then
cross_gas=no
else
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2630: checking for working alloca.h" >&5
+echo "configure:2812: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2635 "configure"
+#line 2817 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2642: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2824: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2663: checking for alloca" >&5
+echo "configure:2845: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2668 "configure"
+#line 2850 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2873: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2723: checking whether alloca needs Cray hooks" >&5
+echo "configure:2905: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2728 "configure"
+#line 2910 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2753: checking for $ac_func" >&5
+echo "configure:2935: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2758 "configure"
+#line 2940 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2781: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2963: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2808: checking stack direction for C alloca" >&5
+echo "configure:2990: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2816 "configure"
+#line 2998 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:2835: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3017: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2857: checking for inline" >&5
+echo "configure:3039: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2864 "configure"
+#line 3046 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2871: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3053: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
for ac_func in unlink remove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2901: checking for $ac_func" >&5
+echo "configure:3083: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2906 "configure"
+#line 3088 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2929: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in sbrk
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2958: checking for $ac_func" >&5
+echo "configure:3140: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2963 "configure"
+#line 3145 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2986: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# enough, but on some of those systems, the assert macro relies on requoting
# working properly!
echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
-echo "configure:3015: checking for working assert macro" >&5
+echo "configure:3197: checking for working assert macro" >&5
if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3020 "configure"
+#line 3202 "configure"
#include "confdefs.h"
#include <assert.h>
#include <stdio.h>
; return 0; }
EOF
-if { (eval echo configure:3036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3218: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_assert_ok=yes
else
"
echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
-echo "configure:3077: checking whether declaration is required for strstr" >&5
+echo "configure:3259: checking whether declaration is required for strstr" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3082 "configure"
+#line 3264 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:3093: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_strstr=no
else
echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
-echo "configure:3114: checking whether declaration is required for malloc" >&5
+echo "configure:3296: checking whether declaration is required for malloc" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3119 "configure"
+#line 3301 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:3130: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3312: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_malloc=no
else
echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
-echo "configure:3151: checking whether declaration is required for free" >&5
+echo "configure:3333: checking whether declaration is required for free" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3156 "configure"
+#line 3338 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:3167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3349: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_free=no
else
echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
-echo "configure:3188: checking whether declaration is required for sbrk" >&5
+echo "configure:3370: checking whether declaration is required for sbrk" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3193 "configure"
+#line 3375 "configure"
#include "confdefs.h"
$gas_test_headers
int main() {
; return 0; }
EOF
-if { (eval echo configure:3204: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3386: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_sbrk=no
else
# for it?
echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
-echo "configure:3228: checking whether declaration is required for errno" >&5
+echo "configure:3410: checking whether declaration is required for errno" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3233 "configure"
+#line 3415 "configure"
#include "confdefs.h"
#ifdef HAVE_ERRNO_H
; return 0; }
EOF
-if { (eval echo configure:3248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_errno=no
else
s%@NM@%$NM%g
s%@LN_S@%$LN_S%g
s%@LIBTOOL@%$LIBTOOL%g
+s%@DLLTOOL@%$DLLTOOL%g
+s%@AS@%$AS%g
s%@extra_objects@%$extra_objects%g
s%@target_cpu_type@%$target_cpu_type%g
s%@obj_format@%$obj_format%g
AC_PROG_CC
AC_PROG_YACC
-AC_PROG_LEX
-AC_DECL_YYTEXT
+AM_PROG_LEX
AM_MAINTAINER_MODE
AM_CYGWIN32
-# Makefile for GNU Assembler documentation
-# Copyright (C) 1987-1993 Free Software Foundation, Inc.
+# Makefile.in generated automatically by automake 1.3 from Makefile.am
-#This file is part of GNU GAS.
+# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-#GNU GAS is free software; you can redistribute it and/or modify
-#it under the terms of the GNU General Public License as published by
-#the Free Software Foundation; either version 2, or (at your option)
-#any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
-#GNU GAS is distributed in the hope that it will be useful,
-#but WITHOUT ANY WARRANTY; without even the implied warranty of
-#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#GNU General Public License for more details.
-#You should have received a copy of the GNU General Public License
-#along with GNU GAS; see the file COPYING. If not, write to
-#the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# The targets for external use include:
-# all, doc, proto, install, uninstall, includes, TAGS,
-# clean, cleanconfig, realclean, stage1, stage2, stage3, stage4.
-
-# Variables that exist for you to override.
+SHELL = @SHELL@
srcdir = @srcdir@
+top_srcdir = @top_srcdir@
VPATH = @srcdir@
-
prefix = @prefix@
-
-program_transform_name = @program_transform_name@
exec_prefix = @exec_prefix@
-bindir = $(exec_prefix)/bin
-libdir = $(exec_prefix)/lib
-datadir = $(prefix)/lib
-mandir = $(prefix)/man
-man1dir = $(mandir)/man1
-man2dir = $(mandir)/man2
-man3dir = $(mandir)/man3
-man4dir = $(mandir)/man4
-man5dir = $(mandir)/man5
-man6dir = $(mandir)/man6
-man7dir = $(mandir)/man7
-man8dir = $(mandir)/man8
-man9dir = $(mandir)/man9
-infodir = $(prefix)/info
-includedir = $(prefix)/include
-docdir = $(datadir)/doc
-
-SHELL = /bin/sh
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DISTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
-INSTALL_XFORM1 = $(INSTALL) -b $(program_transform_name) .1
-
-AR = ar
-AR_FLAGS = qv
-BISON = bison
-MAKEINFO = makeinfo
-TEXI2DVI = TEXINPUTS=$(TEXIDIR):$$TEXINPUTS texi2dvi
-RANLIB = ranlib
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+ALL_OBJ_DEPS = @ALL_OBJ_DEPS@
+AS = @AS@
+BFDLIB = @BFDLIB@
+CC = @CC@
+DLLTOOL = @DLLTOOL@
+EXEEXT = @EXEEXT@
+LD = @LD@
+LEX = @LEX@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+NM = @NM@
+OPCODES_LIB = @OPCODES_LIB@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+YACC = @YACC@
+atof = @atof@
+extra_objects = @extra_objects@
+obj_format = @obj_format@
+target_cpu_type = @target_cpu_type@
+te_file = @te_file@
+
+AUTOMAKE_OPTIONS = cygnus
# What version of the manual you want; "all" includes everything
CONFIG=all
-# Where to find texinfo.tex to format docn with TeX
-TEXIDIR = $(srcdir)/../../texinfo
+man_MANS = as.1
+
+info_TEXINFOS = as.texinfo gasp.texi
+
+CPU_DOCS = \
+ c-a29k.texi \
+ c-arm.texi \
+ c-d10v.texi \
+ c-h8300.texi \
+ c-h8500.texi \
+ c-hppa.texi \
+ c-i386.texi \
+ c-i960.texi \
+ c-m68k.texi \
+ c-mips.texi \
+ c-ns32k.texi \
+ c-sh.texi \
+ c-sparc.texi \
+ c-vax.texi \
+ c-v850.texi \
+ c-z8k.texi
-##
+# This one isn't ready for prime time yet. Not even a little bit.
-all:
-install:
- $(INSTALL_XFORM1) $(srcdir)/as.1 $(man1dir)/as.1
+noinst_TEXINFOS = internals.texi
+
+DISTCLEANFILES = asconfig.texi
+mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
+CONFIG_HEADER = ../config.h
+CONFIG_CLEAN_FILES =
+TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then echo $(top_srcdir)/../texinfo/util/texi2dvi; else echo texi2dvi; fi`
+TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
+INFO_DEPS = as.info gasp.info
+DVIS = as.dvi gasp.dvi
+TEXINFOS = as.texinfo gasp.texi
+man1dir = $(mandir)/man1
+MANS = $(man_MANS)
-info: as.info gasp.info
-dvi: as.dvi gasp.dvi
+NROFF = nroff
+DIST_COMMON = Makefile.am Makefile.in
-asconfig.texi: $(CONFIG).texi
- rm -f asconfig.texi
- ln -s $(srcdir)/$(CONFIG).texi ./asconfig.texi || \
- ln $(srcdir)/$(CONFIG).texi ./asconfig.texi || \
- cp $(srcdir)/$(CONFIG).texi ./asconfig.texi
-
-as.info: $(srcdir)/as.texinfo asconfig.texi
- $(MAKEINFO) -I$(TEXIDIR) -o as.info $(srcdir)/as.texinfo
-
-gasp.info: $(srcdir)/gasp.texi
- $(MAKEINFO) -o gasp.info $(srcdir)/gasp.texi
-
-install-info: install-info-as install-info-gasp
-install-info-as: as.info
- if [ -r as.info ]; then \
- dir=. ; \
- else \
- dir=$(srcdir) ; \
- fi ; \
- for i in `cd $$dir ; echo as.info*` ; do \
- $(INSTALL_DATA) $$dir/$$i $(infodir)/$$i ; \
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP = --best
+all: Makefile $(MANS)
+
+.SUFFIXES:
+.SUFFIXES: .dvi .info .ps .texi .texinfo .txi
+$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && $(AUTOMAKE) --cygnus doc/Makefile
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+as.info: as.texinfo
+as.dvi: as.texinfo
+
+
+gasp.info: gasp.texi
+gasp.dvi: gasp.texi
+
+
+DVIPS = dvips
+
+.texi.info:
+ @rm -f $@ $@-[0-9] $@-[0-9][0-9]
+ $(MAKEINFO) -I $(srcdir) $<
+
+.texi.dvi:
+ TEXINPUTS=$(top_srcdir)/../texinfo:$$TEXINPUTS \
+ MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
+
+.texi:
+ @rm -f $@ $@-[0-9] $@-[0-9][0-9]
+ $(MAKEINFO) -I $(srcdir) $<
+
+.texinfo.info:
+ @rm -f $@ $@-[0-9] $@-[0-9][0-9]
+ $(MAKEINFO) -I $(srcdir) $<
+
+.texinfo:
+ @rm -f $@ $@-[0-9] $@-[0-9][0-9]
+ $(MAKEINFO) -I $(srcdir) $<
+
+.texinfo.dvi:
+ TEXINPUTS=$(top_srcdir)/../texinfo:$$TEXINPUTS \
+ MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
+
+.txi.info:
+ @rm -f $@ $@-[0-9] $@-[0-9][0-9]
+ $(MAKEINFO) -I $(srcdir) $<
+
+.txi.dvi:
+ TEXINPUTS=$(top_srcdir)/../texinfo:$$TEXINPUTS \
+ MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
+
+.txi:
+ @rm -f $@ $@-[0-9] $@-[0-9][0-9]
+ $(MAKEINFO) -I $(srcdir) $<
+.dvi.ps:
+ $(DVIPS) $< -o $@
+
+install-info-am: $(INFO_DEPS)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(infodir)
+ @for file in $(INFO_DEPS); do \
+ if test -f $$file; then d=.; else d=$(srcdir); fi; \
+ for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
+ if test -f $$d/$$ifile; then \
+ echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
+ $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
+ else : ; fi; \
+ done; \
done
-install-info-gasp: gasp.info
- if [ -r gasp.info ]; then \
- dir=. ; \
- else \
- dir=$(srcdir) ; \
- fi ; \
- for i in `cd $$dir ; echo gasp.info*` ; do \
- $(INSTALL_DATA) $$dir/$$i $(infodir)/$$i ; \
+ @$(POST_INSTALL)
+ @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
+ for file in $(INFO_DEPS); do \
+ echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
+ install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
+ done; \
+ else : ; fi
+
+uninstall-info:
+ $(PRE_UNINSTALL)
+ @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
+ ii=yes; \
+ else ii=; fi; \
+ for file in $(INFO_DEPS); do \
+ test -z "$ii" \
+ || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
+ done
+ @$(NORMAL_UNINSTALL)
+ for file in $(INFO_DEPS); do \
+ (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
done
-as.dvi: $(srcdir)/as.texinfo asconfig.texi
- $(TEXI2DVI) $(srcdir)/as.texinfo
+dist-info: $(INFO_DEPS)
+ for base in $(INFO_DEPS); do \
+ if test -f $$base; then d=.; else d=$(srcdir); fi; \
+ for file in `cd $$d && eval echo $$base*`; do \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file; \
+ done; \
+ done
-gasp.dvi: $(srcdir)/gasp.texi
- $(TEXI2DVI) $(srcdir)/gasp.texi
+mostlyclean-aminfo:
+ -rm -f as.aux as.cp as.cps as.dvi as.fn as.fns as.ky as.kys as.ps \
+ as.log as.pg as.toc as.tp as.tps as.vr as.vrs as.op as.tr \
+ as.cv as.cn gasp.aux gasp.cp gasp.cps gasp.dvi gasp.fn \
+ gasp.fns gasp.ky gasp.kys gasp.ps gasp.log gasp.pg gasp.toc \
+ gasp.tp gasp.tps gasp.vr gasp.vrs gasp.op gasp.tr gasp.cv \
+ gasp.cn
-# This one isn't ready for prime time yet. Not even a little bit.
-internals.dvi: $(srcdir)/internals.texi
- $(TEXI2DVI) $(srcdir)/internals.texi
-internals.ps: internals.dvi
- dvips internals.dvi -o internals.ps
-internals.ps4: internals.ps
- psnup -4 < internals.ps > internals.ps4
-
-# ROFF doc targets as.ms, as.mm, as.me
-# (we don't use a variable because we don't trust all makes to handle
-# a var in the target name right).
-# roff output (-ms)
-# THESE ARE PROBABLY BROKEN until texi2roff extended for Texinfo conditionals
-as.ms: $(srcdir)/as.texinfo asconfig.texi
- sed -e '/\\input texinfo/d' \
- -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
- -e 's/{.*,,/{/' \
- $(srcdir)/as.texinfo | \
- texi2roff -ms >as.ms
-
-# roff output (-mm)
-as.mm: $(srcdir)/as.texinfo asconfig.texi
- sed -e '/\\input texinfo/d' \
- -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
- -e 's/{.*,,/{/' \
- -e '/@noindent/d' \
- $(srcdir)/as.texinfo | \
- texi2roff -mm | \
- sed -e 's/---/\\(em/g' \
- >as.mm
-
-# roff output (-me)
-as.me: $(srcdir)/as.texinfo asconfig.texi
- sed -e '/\\input texinfo/d' \
- -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
- -e 's/{.*,,/{/' \
- $(srcdir)/as.texinfo | \
- texi2roff -me >as.me
-
-clean mostlyclean: clean-dvi clean-info
- rm -f asconfig.texi
+clean-aminfo:
+
+distclean-aminfo:
+
+maintainer-clean-aminfo:
+ for i in $(INFO_DEPS); do \
+ rm -f $$i; \
+ if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
+ rm -f $$i-[0-9]*; \
+ fi; \
+ done
+clean-info: mostlyclean-aminfo
+
+install-man1:
+ $(mkinstalldirs) $(DESTDIR)$(man1dir)
+ @list='$(man1_MANS)'; \
+ l2='$(man_MANS)'; for i in $$l2; do \
+ case "$$i" in \
+ *.1*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+ else file=$$i; fi; \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
+ $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
+ done
+
+uninstall-man1:
+ @list='$(man1_MANS)'; \
+ l2='$(man_MANS)'; for i in $$l2; do \
+ case "$$i" in \
+ *.1*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
+ rm -f $(DESTDIR)$(man1dir)/$$inst; \
+ done
+install-man: $(MANS)
+ @$(NORMAL_INSTALL)
+ $(MAKE) install-man1
+uninstall-man:
+ @$(NORMAL_UNINSTALL)
+ $(MAKE) uninstall-man1
+tags: TAGS
+TAGS:
+
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = doc
+
+distdir: $(DISTFILES)
+ @for file in $(DISTFILES); do \
+ if test -f $$file; then d=.; else d=$(srcdir); fi; \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file; \
+ done
+ $(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
+info: $(INFO_DEPS)
+dvi: $(DVIS)
+check:
+ $(MAKE)
+installcheck:
+install-info: install-info-am
+install-exec:
+ @$(NORMAL_INSTALL)
-distclean realclean:
- rm -f Makefile config.status asconfig.texi \
- as.?? as.??s as.aux as.log as.toc \
- gasp.?? gasp.??s gasp.aux gasp.log gasp.toc
+install-data: install-man
+ @$(NORMAL_INSTALL)
-clean-dvi:
- rm -f as.?? as.??? gasp.?? gasp.???
+install: install-exec install-data all
+ @:
-clean-info:
- rm -f as.info* gasp.info*
+uninstall: uninstall-man
+
+install-strip:
+ $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+installdirs:
+ $(mkinstalldirs) $(DESTDIR)$(mandir)/man1
+
+
+mostlyclean-generic:
+ -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -rm -f Makefile $(DISTCLEANFILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+ -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+mostlyclean: mostlyclean-aminfo mostlyclean-generic
+
+clean: clean-aminfo clean-generic mostlyclean
+
+distclean: distclean-aminfo distclean-generic clean
+ -rm -f config.status
+ -rm -f libtool
+
+maintainer-clean: maintainer-clean-aminfo maintainer-clean-generic \
+ distclean
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+.PHONY: install-info-am uninstall-info mostlyclean-aminfo \
+distclean-aminfo clean-aminfo maintainer-clean-aminfo install-man1 \
+uninstall-man1 install-man uninstall-man tags distdir info dvi \
+installcheck install-info install-exec install-data install uninstall \
+all installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+asconfig.texi: $(CONFIG).texi
+ rm -f asconfig.texi
+ ln -s $(srcdir)/$(CONFIG).texi ./asconfig.texi >/dev/null 2>&1 \
+ || ln $(srcdir)/$(CONFIG).texi ./asconfig.texi >/dev/null 2>&1 \
+ || cp $(srcdir)/$(CONFIG).texi ./asconfig.texi
-force:
+as.info: $(srcdir)/as.texinfo asconfig.texi $(CPU_DOCS)
+as.dvi: $(srcdir)/as.texinfo asconfig.texi $(CPU_DOCS)
-Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
- (cd .. ; $(SHELL) ./config.status)
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
projects / platform / upstream / binutils.git / commitdiff