if WL_TI
source "drivers/net/wireless/ti/wl1251/Kconfig"
+source "drivers/net/wireless/ti/wl12xx/Kconfig"
+
+# keep last for automatic dependencies
source "drivers/net/wireless/ti/wlcore/Kconfig"
endif # WL_TI
-obj-$(CONFIG_WL12XX) += wlcore/
+obj-$(CONFIG_WLCORE) += wlcore/
+obj-$(CONFIG_WL12XX) += wl12xx/
obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wlcore/
obj-$(CONFIG_WL1251) += wl1251/
--- /dev/null
+config WL12XX
+ tristate "TI wl12xx support"
+ select WLCORE
+ ---help---
+ This module adds support for wireless adapters based on TI wl1271,
+ wl1273, wl1281 and wl1283 chipsets. This module does *not* include
+ support for wl1251. For wl1251 support, use the separate homonymous
+ driver instead.
--- /dev/null
+wl12xx-objs = main.o
+
+obj-$(CONFIG_WL12XX) += wl12xx.o
--- /dev/null
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "../wlcore/wlcore.h"
+
+static const struct platform_device_id wl12xx_id_table[] __devinitconst = {
+ { "wl12xx", 0 },
+ { } /* Terminating Entry */
+};
+MODULE_DEVICE_TABLE(platform, wl12xx_id_table);
+
+static struct platform_driver wl12xx_driver = {
+ .probe = wlcore_probe,
+ .remove = __devexit_p(wlcore_remove),
+ .id_table = wl12xx_id_table,
+ .driver = {
+ .name = "wl12xx_driver",
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init wl12xx_init(void)
+{
+ return platform_driver_register(&wl12xx_driver);
+}
+module_init(wl12xx_init);
+
+static void __exit wl12xx_exit(void)
+{
+ platform_driver_unregister(&wl12xx_driver);
+}
+module_exit(wl12xx_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
-menuconfig WL12XX_MENU
- tristate "TI wl12xx driver support"
- depends on MAC80211 && EXPERIMENTAL
- ---help---
- This will enable TI wl12xx driver support for the following chips:
- wl1271, wl1273, wl1281 and wl1283.
- The drivers make use of the mac80211 stack.
-
-config WL12XX
- tristate "TI wl12xx support"
- depends on WL12XX_MENU && GENERIC_HARDIRQS
+config WLCORE
+ tristate "TI wlcore support"
+ depends on WL_TI && GENERIC_HARDIRQS
depends on INET
select FW_LOADER
---help---
- This module adds support for wireless adapters based on TI wl1271 and
- TI wl1273 chipsets. This module does *not* include support for wl1251.
- For wl1251 support, use the separate homonymous driver instead.
+ This module contains the main code for TI WLAN chips. It abstracts
+ hardware-specific differences among different chipset families.
+ Each chipset family needs to implement its own lower-level module
+ that will depend on this module for the common code.
- If you choose to build a module, it will be called wl12xx. Say N if
+ If you choose to build a module, it will be called wlcore. Say N if
unsure.
-config WL12XX_SPI
- tristate "TI wl12xx SPI support"
- depends on WL12XX && SPI_MASTER
+config WLCORE_SPI
+ tristate "TI wlcore SPI support"
+ depends on WLCORE && SPI_MASTER
select CRC7
---help---
This module adds support for the SPI interface of adapters using
- TI wl12xx chipsets. Select this if your platform is using
+ TI WLAN chipsets. Select this if your platform is using
the SPI bus.
- If you choose to build a module, it'll be called wl12xx_spi.
+ If you choose to build a module, it'll be called wlcore_spi.
Say N if unsure.
-config WL12XX_SDIO
- tristate "TI wl12xx SDIO support"
- depends on WL12XX && MMC
+config WLCORE_SDIO
+ tristate "TI wlcore SDIO support"
+ depends on WLCORE && MMC
---help---
This module adds support for the SDIO interface of adapters using
- TI wl12xx chipsets. Select this if your platform is using
+ TI WLAN chipsets. Select this if your platform is using
the SDIO bus.
- If you choose to build a module, it'll be called wl12xx_sdio.
+ If you choose to build a module, it'll be called wlcore_sdio.
Say N if unsure.
config WL12XX_PLATFORM_DATA
bool
- depends on WL12XX_SDIO != n || WL1251_SDIO != n
+ depends on WLCORE_SDIO != n || WL1251_SDIO != n
default y
-wl12xx-objs = main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \
+wlcore-objs = main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \
boot.o init.o debugfs.o scan.o
-wl12xx_spi-objs = spi.o
-wl12xx_sdio-objs = sdio.o
+wlcore_spi-objs = spi.o
+wlcore_sdio-objs = sdio.o
-wl12xx-$(CONFIG_NL80211_TESTMODE) += testmode.o
-obj-$(CONFIG_WL12XX) += wl12xx.o
-obj-$(CONFIG_WL12XX_SPI) += wl12xx_spi.o
-obj-$(CONFIG_WL12XX_SDIO) += wl12xx_sdio.o
+wlcore-$(CONFIG_NL80211_TESTMODE) += testmode.o
+obj-$(CONFIG_WLCORE) += wlcore.o
+obj-$(CONFIG_WLCORE_SPI) += wlcore_spi.o
+obj-$(CONFIG_WLCORE_SDIO) += wlcore_sdio.o
# small builtin driver bit
obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wl12xx_platform_data.o
return IRQ_WAKE_THREAD;
}
-static int __devinit wl12xx_probe(struct platform_device *pdev)
+int __devinit wlcore_probe(struct platform_device *pdev)
{
struct wl12xx_platform_data *pdata = pdev->dev.platform_data;
struct ieee80211_hw *hw;
out:
return ret;
}
+EXPORT_SYMBOL_GPL(wlcore_probe);
-static int __devexit wl12xx_remove(struct platform_device *pdev)
+int __devexit wlcore_remove(struct platform_device *pdev)
{
struct wl1271 *wl = platform_get_drvdata(pdev);
return 0;
}
-
-static const struct platform_device_id wl12xx_id_table[] __devinitconst = {
- { "wl12xx", 0 },
- { } /* Terminating Entry */
-};
-MODULE_DEVICE_TABLE(platform, wl12xx_id_table);
-
-static struct platform_driver wl12xx_driver = {
- .probe = wl12xx_probe,
- .remove = __devexit_p(wl12xx_remove),
- .id_table = wl12xx_id_table,
- .driver = {
- .name = "wl12xx_driver",
- .owner = THIS_MODULE,
- }
-};
-
-static int __init wl12xx_init(void)
-{
- return platform_driver_register(&wl12xx_driver);
-}
-module_init(wl12xx_init);
-
-static void __exit wl12xx_exit(void)
-{
- platform_driver_unregister(&wl12xx_driver);
-}
-module_exit(wl12xx_exit);
+EXPORT_SYMBOL_GPL(wlcore_remove);
u32 wl12xx_debug_level = DEBUG_NONE;
EXPORT_SYMBOL_GPL(wl12xx_debug_level);
--- /dev/null
+/*
+ * This file is part of wlcore
+ *
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WLCORE_H__
+#define __WLCORE_H__
+
+int __devinit wlcore_probe(struct platform_device *pdev);
+int __devexit wlcore_remove(struct platform_device *pdev);
+
+#endif /* __WLCORE_H__ */
projects / platform / kernel / linux-exynos.git / commitdiff