media: imx274: device tree binding file

The binding file for imx274 CMOS sensor V4l2 driver

Signed-off-by: Leon Luo <leonl@leopardimaging.com>
Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt
new file mode 100644 (file)
index 0000000..80f2e89
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx274.txt
@@ -0,0 +1,33 @@
+* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor
+
+The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with
+an active array size of 3864H x 2202V. It is programmable through I2C
+interface. The I2C address is fixed to 0x1a as per sensor data sheet.
+Image data is sent through MIPI CSI-2, which is configured as 4 lanes
+at 1440 Mbps.
+
+
+Required Properties:
+- compatible: value should be "sony,imx274" for imx274 sensor
+- reg: I2C bus address of the device
+
+Optional Properties:
+- reset-gpios: Sensor reset GPIO
+
+The imx274 device node should contain one 'port' child node with
+an 'endpoint' subnode. For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+       sensor@1a {
+               compatible = "sony,imx274";
+               reg = <0x1a>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reset-gpios = <&gpio_sensor 0 0>;
+               port {
+                       sensor_out: endpoint {
+                               remote-endpoint = <&csiss_in>;
+                       };
+               };
+       };