scsi: lpfc: Abort outstanding ELS cmds when mailbox timeout error is detected

[ Upstream commit 089ea22e374aa20043e72243c47b5867d5419d38 ]

A mailbox timeout error usually indicates something has gone wrong, and a
follow up reset of the HBA is a typical recovery mechanism.  Introduce a
MBX_TMO_ERR flag to detect such cases and have lpfc_els_flush_cmd abort ELS
commands if the MBX_TMO_ERR flag condition was set.  This ensures all of
the registered SGL resources meant for ELS traffic are not leaked after an
HBA reset.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 9ad233b..664ac30 100644 (file)
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -895,6 +895,7 @@ enum lpfc_irq_chann_mode {
 enum lpfc_hba_bit_flags {
        FABRIC_COMANDS_BLOCKED,
        HBA_PCI_ERR,
+       MBX_TMO_ERR,
 };
 
 struct lpfc_hba {

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 43ebb41..6b5ce98 100644 (file)
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -9410,11 +9410,13 @@ void
 lpfc_els_flush_cmd(struct lpfc_vport *vport)
 {
        LIST_HEAD(abort_list);
+       LIST_HEAD(cancel_list);
        struct lpfc_hba  *phba = vport->phba;
        struct lpfc_sli_ring *pring;
        struct lpfc_iocbq *tmp_iocb, *piocb;
        u32 ulp_command;
        unsigned long iflags = 0;
+       bool mbx_tmo_err;
 
        lpfc_fabric_abort_vport(vport);
 
@@ -9436,15 +9438,16 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
        if (phba->sli_rev == LPFC_SLI_REV4)
                spin_lock(&pring->ring_lock);
 
+       mbx_tmo_err = test_bit(MBX_TMO_ERR, &phba->bit_flags);
        /* First we need to issue aborts to outstanding cmds on txcmpl */
        list_for_each_entry_safe(piocb, tmp_iocb, &pring->txcmplq, list) {
-               if (piocb->cmd_flag & LPFC_IO_LIBDFC)
+               if (piocb->cmd_flag & LPFC_IO_LIBDFC && !mbx_tmo_err)
                        continue;
 
                if (piocb->vport != vport)
                        continue;
 
-               if (piocb->cmd_flag & LPFC_DRIVER_ABORTED)
+               if (piocb->cmd_flag & LPFC_DRIVER_ABORTED && !mbx_tmo_err)
                        continue;
 
                /* On the ELS ring we can have ELS_REQUESTs or
@@ -9463,8 +9466,8 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
                         */
                        if (phba->link_state == LPFC_LINK_DOWN)
                                piocb->cmd_cmpl = lpfc_cmpl_els_link_down;
-               }
-               if (ulp_command == CMD_GEN_REQUEST64_CR)
+               } else if (ulp_command == CMD_GEN_REQUEST64_CR ||
+                          mbx_tmo_err)
                        list_add_tail(&piocb->dlist, &abort_list);
        }
 
@@ -9476,11 +9479,19 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
        list_for_each_entry_safe(piocb, tmp_iocb, &abort_list, dlist) {
                spin_lock_irqsave(&phba->hbalock, iflags);
                list_del_init(&piocb->dlist);
-               lpfc_sli_issue_abort_iotag(phba, pring, piocb, NULL);
+               if (mbx_tmo_err)
+                       list_move_tail(&piocb->list, &cancel_list);
+               else
+                       lpfc_sli_issue_abort_iotag(phba, pring, piocb, NULL);
+
                spin_unlock_irqrestore(&phba->hbalock, iflags);
        }
-       /* Make sure HBA is alive */
-       lpfc_issue_hb_tmo(phba);
+       if (!list_empty(&cancel_list))
+               lpfc_sli_cancel_iocbs(phba, &cancel_list, IOSTAT_LOCAL_REJECT,
+                                     IOERR_SLI_ABORTED);
+       else
+               /* Make sure HBA is alive */
+               lpfc_issue_hb_tmo(phba);
 
        if (!list_empty(&abort_list))
                lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index d54fd15..f59de61 100644 (file)
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -7563,6 +7563,8 @@ lpfc_disable_pci_dev(struct lpfc_hba *phba)
 void
 lpfc_reset_hba(struct lpfc_hba *phba)
 {
+       int rc = 0;
+
        /* If resets are disabled then set error state and return. */
        if (!phba->cfg_enable_hba_reset) {
                phba->link_state = LPFC_HBA_ERROR;
@@ -7573,13 +7575,25 @@ lpfc_reset_hba(struct lpfc_hba *phba)
        if (phba->sli.sli_flag & LPFC_SLI_ACTIVE) {
                lpfc_offline_prep(phba, LPFC_MBX_WAIT);
        } else {
+               if (test_bit(MBX_TMO_ERR, &phba->bit_flags)) {
+                       /* Perform a PCI function reset to start from clean */
+                       rc = lpfc_pci_function_reset(phba);
+                       lpfc_els_flush_all_cmd(phba);
+               }
                lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
                lpfc_sli_flush_io_rings(phba);
        }
        lpfc_offline(phba);
-       lpfc_sli_brdrestart(phba);
-       lpfc_online(phba);
-       lpfc_unblock_mgmt_io(phba);
+       clear_bit(MBX_TMO_ERR, &phba->bit_flags);
+       if (unlikely(rc)) {
+               lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+                               "8888 PCI function reset failed rc %x\n",
+                               rc);
+       } else {
+               lpfc_sli_brdrestart(phba);
+               lpfc_online(phba);
+               lpfc_unblock_mgmt_io(phba);
+       }
 }
 
 /**

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index b44bb3a..427a6ac 100644 (file)
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -3919,6 +3919,8 @@ void lpfc_poll_eratt(struct timer_list *t)
        uint64_t sli_intr, cnt;
 
        phba = from_timer(phba, t, eratt_poll);
+       if (!(phba->hba_flag & HBA_SETUP))
+               return;
 
        /* Here we will also keep track of interrupts per sec of the hba */
        sli_intr = phba->sli.slistat.sli_intr;
@@ -7712,7 +7714,9 @@ lpfc_sli4_repost_sgl_list(struct lpfc_hba *phba,
                spin_unlock_irq(&phba->hbalock);
        } else {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
-                               "3161 Failure to post sgl to port.\n");
+                               "3161 Failure to post sgl to port,status %x "
+                               "blkcnt %d totalcnt %d postcnt %d\n",
+                               status, block_cnt, total_cnt, post_cnt);
                return -EIO;
        }
 
@@ -8495,6 +8499,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
                        spin_unlock_irq(&phba->hbalock);
                }
        }
+       phba->hba_flag &= ~HBA_SETUP;
 
        lpfc_sli4_dip(phba);
 
@@ -9317,6 +9322,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
         * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing
         * it to fail all outstanding SCSI IO.
         */
+       set_bit(MBX_TMO_ERR, &phba->bit_flags);
        spin_lock_irq(&phba->pport->work_port_lock);
        phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
        spin_unlock_irq(&phba->pport->work_port_lock);