These four files are left over from the h8300 removal.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+++ /dev/null
-Renesas H8S2678 PLL clock
-
-This device is Clock multiplyer
-
-Required Properties:
-
- - compatible: Must be "renesas,h8s2678-pll-clock"
-
- - clocks: Reference to the parent clocks
-
- - #clock-cells: Must be 0
-
- - reg: Two rate selector (Multiply / Divide) register address
-
-Example
--------
-
- pllclk: pllclk {
- compatible = "renesas,h8s2678-pll-clock";
- clocks = <&xclk>;
- #clock-cells = <0>;
- reg = <0xfee03b 2>, <0xfee045 2>;
- };
+++ /dev/null
-* Renesas H8/300 16bit timer
-
-The 16bit timer is a 16bit timer/counter with configurable clock inputs and
-programmable compare match.
-
-Required Properties:
-
- - compatible: must contain "renesas,16bit-timer"
- - reg: base address and length of the registers block for the timer module.
- - interrupts: interrupt-specifier for the timer, IMIA
- - clocks: a list of phandle, one for each entry in clock-names.
- - clock-names: must contain "peripheral_clk" for the functional clock.
- - renesas,channel: timer channel number.
-
-Example:
-
- timer16: timer@ffff68 {
- compatible = "reneas,16bit-timer";
- reg = <0xffff68 8>, <0xffff60 8>;
- interrupts = <24>;
- renesas,channel = <0>;
- clocks = <&pclk>;
- clock-names = "peripheral_clk";
- };
-
+++ /dev/null
-* Renesas H8/300 8bit timer
-
-The 8bit timer is a 8bit timer/counter with configurable clock inputs and
-programmable compare match.
-
-This implement only supported cascade mode.
-
-Required Properties:
-
- - compatible: must contain "renesas,8bit-timer"
- - reg: base address and length of the registers block for the timer module.
- - interrupts: interrupt-specifier for the timer, CMIA and TOVI
- - clocks: a list of phandle, one for each entry in clock-names.
- - clock-names: must contain "fck" for the functional clock.
-
-Example:
-
- timer8_0: timer@ffff80 {
- compatible = "renesas,8bit-timer";
- reg = <0xffff80 10>;
- interrupts = <36>;
- clocks = <&fclk>;
- clock-names = "fck";
- };
-
+++ /dev/null
-../../../arch/h8300/boot/dts
\ No newline at end of file