leds: rgb: leds-qcom-lpg: Fix calculation of best period Hi-Res PWMs

commit 2528eec7da0ec58fcae6d12cfa79a622c933d86b upstream.

When determining the actual best period by looping through all
possible PWM configs, the resolution currently used is based on
bit shift value which is off-by-one above the possible maximum
PWM value allowed.

So subtract one from the resolution before determining the best
period so that the maximum duty cycle requested by the PWM user
won't result in a value above the maximum allowed by the selected
resolution.

Cc: stable@vger.kernel.org    # 6.4
Fixes: b00d2ed37617 ("leds: rgb: leds-qcom-lpg: Add support for high resolution PWM")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20250305-leds-qcom-lpg-fix-max-pwm-on-hi-res-v4-3-bfe124a53a9f@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
index 2115709fca5236337827553fde04321109260b47..a41c2b13766dc1f1e6b130ca2a4713f85625483e 100644 (file)
--- a/drivers/leds/rgb/leds-qcom-lpg.c
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@@ -311,7 +311,7 @@ static int lpg_calc_freq(struct lpg_channel *chan, uint64_t period)
                max_res = LPG_RESOLUTION_9BIT;
        }
 
-       min_period = div64_u64((u64)NSEC_PER_SEC * (1 << pwm_resolution_arr[0]),
+       min_period = div64_u64((u64)NSEC_PER_SEC * ((1 << pwm_resolution_arr[0]) - 1),
                               clk_rate_arr[clk_len - 1]);
        if (period <= min_period)
                return -EINVAL;
@@ -332,7 +332,7 @@ static int lpg_calc_freq(struct lpg_channel *chan, uint64_t period)
         */
 
        for (i = 0; i < pwm_resolution_count; i++) {
-               resolution = 1 << pwm_resolution_arr[i];
+               resolution = (1 << pwm_resolution_arr[i]) - 1;
                for (clk_sel = 1; clk_sel < clk_len; clk_sel++) {
                        u64 numerator = period * clk_rate_arr[clk_sel];
 
@@ -1060,7 +1060,7 @@ static int lpg_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
                if (ret)
                        return ret;
 
-               state->period = DIV_ROUND_UP_ULL((u64)NSEC_PER_SEC * (1 << resolution) *
+               state->period = DIV_ROUND_UP_ULL((u64)NSEC_PER_SEC * ((1 << resolution) - 1) *
                                                 pre_div * (1 << m), refclk);
                state->duty_cycle = DIV_ROUND_UP_ULL((u64)NSEC_PER_SEC * pwm_value * pre_div * (1 << m), refclk);
        } else {