* different link partner.
*/
ret_val = e1000e_config_fc_after_link_up(hw);
- if (ret_val) {
+ if (ret_val)
e_dbg("Error configuring flow control\n");
- }
return ret_val;
}
{
u32 ledctl;
- if (hw->mac.ops.setup_led != e1000e_setup_led_generic) {
+ if (hw->mac.ops.setup_led != e1000e_setup_led_generic)
return -E1000_ERR_CONFIG;
- }
if (hw->phy.media_type == e1000_media_type_fiber) {
ledctl = er32(LEDCTL);
err = pci_enable_msix(adapter->pdev,
adapter->msix_entries,
adapter->num_vectors);
- if (err == 0) {
+ if (err == 0)
return;
- }
}
/* MSI-X failed, so fall through and try MSI */
e_err("Failed to initialize MSI-X interrupts. "
e1000_clean_rx_ring(adapter);
- for (i = 0; i < rx_ring->count; i++) {
+ for (i = 0; i < rx_ring->count; i++)
kfree(rx_ring->buffer_info[i].ps_pages);
- }
vfree(rx_ring->buffer_info);
rx_ring->buffer_info = NULL;
/* handle TSO and jumbo frames */
if (bytes/packets > 8000)
retval = bulk_latency;
- else if ((packets < 5) && (bytes > 512)) {
+ else if ((packets < 5) && (bytes > 512))
retval = low_latency;
- }
break;
case low_latency: /* 50 usec aka 20000 ints/s */
if (bytes > 10000) {
/* this if handles the TSO accounting */
- if (bytes/packets > 8000) {
+ if (bytes/packets > 8000)
retval = bulk_latency;
- } else if ((packets < 10) || ((bytes/packets) > 1200)) {
+ else if ((packets < 10) || ((bytes/packets) > 1200))
retval = bulk_latency;
- } else if ((packets > 35)) {
+ else if ((packets > 35))
retval = lowest_latency;
- }
} else if (bytes/packets > 2000) {
retval = bulk_latency;
} else if (packets <= 2 && bytes < 512) {
break;
case bulk_latency: /* 250 usec aka 4000 ints/s */
if (bytes > 25000) {
- if (packets > 35) {
+ if (packets > 35)
retval = low_latency;
- }
} else if (bytes < 6000) {
retval = low_latency;
}
e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
- if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL)
ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
- }
return ret_val;
}