/*
* structure for Packet Filter Control reg in rxmac address map
* located at address 0x4084
+ *
+ * 31-23: unused
+ * 22-16: min_pkt_size
+ * 15-4: unused
+ * 3: filter_frag_en
+ * 2: filter_uni_en
+ * 1: filter_multi_en
+ * 0: filter_broad_en
*/
-typedef union _RXMAC_PF_CTRL_t {
- u32 value;
- struct {
-#ifdef _BIT_FIELDS_HTOL
- u32 unused2:9; /* bits 23-31 */
- u32 min_pkt_size:7; /* bits 16-22 */
- u32 unused1:12; /* bits 4-15 */
- u32 filter_frag_en:1; /* bit 3 */
- u32 filter_uni_en:1; /* bit 2 */
- u32 filter_multi_en:1; /* bit 1 */
- u32 filter_broad_en:1; /* bit 0 */
-#else
- u32 filter_broad_en:1; /* bit 0 */
- u32 filter_multi_en:1; /* bit 1 */
- u32 filter_uni_en:1; /* bit 2 */
- u32 filter_frag_en:1; /* bit 3 */
- u32 unused1:12; /* bits 4-15 */
- u32 min_pkt_size:7; /* bits 16-22 */
- u32 unused2:9; /* bits 23-31 */
-#endif
- } bits;
-} RXMAC_PF_CTRL_t, *PRXMAC_PF_CTRL_t;
/*
* structure for Memory Controller Interface Control Max Segment reg in rxmac
u32 multi_hash2; /* 0x4078 */
u32 multi_hash3; /* 0x407C */
u32 multi_hash4; /* 0x4080 */
- RXMAC_PF_CTRL_t pf_ctrl; /* 0x4084 */
+ u32 pf_ctrl; /* 0x4084 */
RXMAC_MCIF_CTRL_MAX_SEG_t mcif_ctrl_max_seg; /* 0x4088 */
RXMAC_MCIF_WATER_MARK_t mcif_water_mark; /* 0x408C */
RXMAC_RXQ_DIAG_t rxq_diag; /* 0x4090 */
struct _RXMAC_t __iomem *pRxMac = &etdev->regs->rxmac;
RXMAC_WOL_SA_LO_t sa_lo;
RXMAC_WOL_SA_HI_t sa_hi;
- RXMAC_PF_CTRL_t pf_ctrl = { 0 };
+ u32 pf_ctrl = 0;
/* Disable the MAC while it is being configured (also disable WOL) */
writel(0x8, &pRxMac->ctrl.value);
writel(sa_hi.value, &pRxMac->sa_hi.value);
/* Disable all Packet Filtering */
- writel(0, &pRxMac->pf_ctrl.value);
+ writel(0, &pRxMac->pf_ctrl);
/* Let's initialize the Unicast Packet filtering address */
if (etdev->PacketFilter & ET131X_PACKET_TYPE_DIRECTED) {
SetupDeviceForUnicast(etdev);
- pf_ctrl.bits.filter_uni_en = 1;
+ pf_ctrl |= 4; /* Unicast filter */
} else {
writel(0, &pRxMac->uni_pf_addr1.value);
writel(0, &pRxMac->uni_pf_addr2.value);
}
/* Let's initialize the Multicast hash */
- if (etdev->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST) {
- pf_ctrl.bits.filter_multi_en = 0;
- } else {
- pf_ctrl.bits.filter_multi_en = 1;
+ if (!(etdev->PacketFilter & ET131X_PACKET_TYPE_ALL_MULTICAST)) {
+ pf_ctrl |= 2; /* Multicast filter */
SetupDeviceForMulticast(etdev);
}
/* Runt packet filtering. Didn't work in version A silicon. */
- pf_ctrl.bits.min_pkt_size = NIC_MIN_PACKET_SIZE + 4;
- pf_ctrl.bits.filter_frag_en = 1;
+ pf_ctrl |= (NIC_MIN_PACKET_SIZE + 4) << 16;
+ pf_ctrl |= 8; /* Fragment filter */
if (etdev->RegistryJumboPacket > 8192) {
RXMAC_MCIF_CTRL_MAX_SEG_t mcif_ctrl_max_seg;
* dropping doesn't work, so it is disabled in the pf_ctrl register,
* but we still leave the packet filter on.
*/
- writel(pf_ctrl.value, &pRxMac->pf_ctrl.value);
+ writel(pf_ctrl, &pRxMac->pf_ctrl);
writel(0x9, &pRxMac->ctrl.value);
}
* et131x_set_packet_filter - Configures the Rx Packet filtering on the device
* @adapter: pointer to our private adapter structure
*
+ * FIXME: lot of dups with MAC code
+ *
* Returns 0 on success, errno on failure
*/
int et131x_set_packet_filter(struct et131x_adapter *adapter)
int status = 0;
uint32_t filter = adapter->PacketFilter;
RXMAC_CTRL_t ctrl;
- RXMAC_PF_CTRL_t pf_ctrl;
+ u32 pf_ctrl;
ctrl.value = readl(&adapter->regs->rxmac.ctrl.value);
- pf_ctrl.value = readl(&adapter->regs->rxmac.pf_ctrl.value);
+ pf_ctrl = readl(&adapter->regs->rxmac.pf_ctrl);
/* Default to disabled packet filtering. Enable it in the individual
* case statements that require the device to filter something
/* Set us to be in promiscuous mode so we receive everything, this
* is also true when we get a packet filter of 0
*/
- if ((filter & ET131X_PACKET_TYPE_PROMISCUOUS) || filter == 0) {
- pf_ctrl.bits.filter_broad_en = 0;
- pf_ctrl.bits.filter_multi_en = 0;
- pf_ctrl.bits.filter_uni_en = 0;
- } else {
+ if ((filter & ET131X_PACKET_TYPE_PROMISCUOUS) || filter == 0)
+ pf_ctrl &= ~7; /* Clear filter bits */
+ else {
/*
* Set us up with Multicast packet filtering. Three cases are
* possible - (1) we have a multi-cast list, (2) we receive ALL
* multicast entries or (3) we receive none.
*/
- if (filter & ET131X_PACKET_TYPE_ALL_MULTICAST) {
- pf_ctrl.bits.filter_multi_en = 0;
- } else {
+ if (filter & ET131X_PACKET_TYPE_ALL_MULTICAST)
+ pf_ctrl &= ~2; /* Multicast filter bit */
+ else {
SetupDeviceForMulticast(adapter);
- pf_ctrl.bits.filter_multi_en = 1;
+ pf_ctrl |= 2;
ctrl.bits.pkt_filter_disable = 0;
}
/* Set us up with Unicast packet filtering */
if (filter & ET131X_PACKET_TYPE_DIRECTED) {
SetupDeviceForUnicast(adapter);
- pf_ctrl.bits.filter_uni_en = 1;
+ pf_ctrl |= 4;
ctrl.bits.pkt_filter_disable = 0;
}
/* Set us up with Broadcast packet filtering */
if (filter & ET131X_PACKET_TYPE_BROADCAST) {
- pf_ctrl.bits.filter_broad_en = 1;
+ pf_ctrl |= 1; /* Broadcast filter bit */
ctrl.bits.pkt_filter_disable = 0;
- } else {
- pf_ctrl.bits.filter_broad_en = 0;
- }
+ } else
+ pf_ctrl &= ~1;
/* Setup the receive mac configuration registers - Packet
* Filter control + the enable / disable for packet filter
* in the control reg.
*/
- writel(pf_ctrl.value,
- &adapter->regs->rxmac.pf_ctrl.value);
+ writel(pf_ctrl, &adapter->regs->rxmac.pf_ctrl);
writel(ctrl.value, &adapter->regs->rxmac.ctrl.value);
}
return status;