--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2019-2021 TQ-Systems GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mq-tqma8mq.dtsi"
+#include "mba8mx.dtsi"
+
+/ {
+ model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx";
+ compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+
+ aliases {
+ eeprom0 = &eeprom3;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ rtc0 = &pcf85063;
+ rtc1 = &snvs_rtc;
+ };
+
+ extcon_usbotg: extcon-usbotg0 {
+ compatible = "linux,extcon-usb-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbcon0>;
+ id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ pcie1_refclk: pcie1-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ reg_otg_vbus: regulator-otg-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_regotgvbus>;
+ regulator-name = "MBA8MQ_OTG_VBUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usdhc2_vmmc: regulator-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&btn2 {
+ gpios = <&gpio3 17 GPIO_ACTIVE_LOW>;
+};
+
+&gpio_leds {
+ led3 {
+ label = "led3";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c1 {
+ expander2: gpio@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <®_vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_expander>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ mpcie-rst-hog {
+ gpio-hog;
+ gpios = <13 0>;
+ output-high;
+ line-name = "MPCIE_RST#";
+ };
+ };
+};
+
+&irqsteer {
+ status = "okay";
+};
+
+&led2 {
+ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie0 {
+ reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+ <&clk IMX8MQ_CLK_PCIE1_AUX>,
+ <&clk IMX8MQ_CLK_PCIE1_PHY>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+ epdev_on-supply = <®_vcc_3v3>;
+ hard-wired = <1>;
+ status = "okay";
+};
+
+/*
+ * miniPCIe, also usable for cards with USB. Therefore configure the reset as
+ * static gpio hog.
+ */
+&pcie1 {
+ clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+ <&clk IMX8MQ_CLK_PCIE2_AUX>,
+ <&clk IMX8MQ_CLK_PCIE2_PHY>,
+ <&pcie1_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+ epdev_on-supply = <®_vcc_3v3>;
+ hard-wired = <1>;
+ status = "okay";
+};
+
+&sai3 {
+ assigned-clocks = <&clk IMX8MQ_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
+ clocks = <&clk IMX8MQ_CLK_SAI3_IPG>, <&clk IMX8MQ_CLK_DUMMY>,
+ <&clk IMX8MQ_CLK_SAI3_ROOT>, <&clk IMX8MQ_CLK_DUMMY>,
+ <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_AUDIO_PLL1_OUT>,
+ <&clk IMX8MQ_AUDIO_PLL2_OUT>;
+};
+
+&tlv320aic3x04 {
+ clock-names = "mclk";
+ clocks = <&clk IMX8MQ_CLK_SAI3_ROOT>;
+};
+
+&uart1 {
+ assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+};
+
+&uart2 {
+ assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+};
+
+/* console */
+&uart3 {
+ assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
+ assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+};
+
+&usb3_phy0 {
+ vbus-supply = <®_otg_vbus>;
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ /* we implement dual role but not full featured OTG */
+ extcon = <&extcon_usbotg>;
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ /* OC not supported due to non matching active polarity */
+ disable-over-current;
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x0000004e>,
+ <MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x0000004e>,
+ <MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x0000004e>,
+ <MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x0000004e>;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x0000004e>,
+ <MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x0000004e>,
+ <MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x0000004e>,
+ <MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x0000004e>;
+ };
+
+ pinctrl_expander: expandergrp {
+ fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0xd6>;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3>,
+ <MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23>,
+ <MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f>,
+ <MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f>,
+ <MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f>,
+ <MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f>,
+ <MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91>,
+ <MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91>,
+ <MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91>,
+ <MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91>,
+ <MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f>,
+ <MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91>,
+ <MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91>,
+ <MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f>;
+ };
+
+ pinctrl_gpiobutton: gpiobuttongrp {
+ fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41>,
+ <MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x41>,
+ <MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x41>;
+ };
+
+ pinctrl_gpioled: gpioledgrp {
+ fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x41>,
+ <MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41>,
+ <MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x41>;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000067>,
+ <MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000067>;
+ };
+
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
+ fsl,pins = <MX8MQ_IOMUXC_I2C2_SCL_GPIO5_IO16 0x40000067>,
+ <MX8MQ_IOMUXC_I2C2_SDA_GPIO5_IO17 0x40000067>;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000067>,
+ <MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000067>;
+ };
+
+ pinctrl_i2c3_gpio: i2c3gpiogrp {
+ fsl,pins = <MX8MQ_IOMUXC_I2C3_SCL_GPIO5_IO18 0x40000067>,
+ <MX8MQ_IOMUXC_I2C3_SDA_GPIO5_IO19 0x40000067>;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO14_PWM3_OUT 0x16>;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO15_PWM4_OUT 0x16>;
+ };
+
+ pinctrl_regotgvbus: reggotgvbusgrp {
+ /* USB1 OTG PWR as GPIO */
+ fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x06>;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0xc1>;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <MX8MQ_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6>,
+ <MX8MQ_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0xd6>,
+ <MX8MQ_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0xd6>,
+ <MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6>,
+ <MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6>,
+ <MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6>,
+ <MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x79>,
+ <MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x79>;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x79>,
+ <MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x79>;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x79>,
+ <MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x79>;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <MX8MQ_IOMUXC_UART4_RXD_UART4_DCE_RX 0x79>,
+ <MX8MQ_IOMUXC_UART4_TXD_UART4_DCE_TX 0x79>;
+ };
+
+ pinctrl_usbcon0: usb0congrp {
+ /* ID: floating / high: device, low: host -> use PU */
+ fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xe6>;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83>,
+ <MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3>,
+ <MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3>,
+ <MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3>,
+ <MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3>,
+ <MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3>,
+ <MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1>;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85>,
+ <MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5>,
+ <MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5>,
+ <MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5>,
+ <MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5>,
+ <MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5>,
+ <MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1>;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f>,
+ <MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7>,
+ <MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7>,
+ <MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7>,
+ <MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7>,
+ <MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7>,
+ <MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1>;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+ fsl,pins = <MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2019-2021 TQ-Systems GmbH
+ */
+
+#include "imx8mq.dtsi"
+
+/ {
+ model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ";
+ compatible = "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+
+ memory@40000000 {
+ device_type = "memory";
+ /* our minimum RAM config will be 1024 MiB */
+ reg = <0x00000000 0x40000000 0 0x40000000>;
+ };
+
+ /* e-MMC IO, needed for HS modes */
+ reg_vcc1v8: regulator-vcc1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "TQMA8MX_VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_vcc3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "TQMA8MX_VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_vdd_arm: regulator-vdd-arm {
+ compatible = "regulator-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dvfs>;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "TQMa8Mx_DVFS";
+ regulator-type = "voltage";
+ regulator-settling-time-us = <150000>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ states = <900000 0x1 1000000 0x0>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* global autoconfigured region for contiguous allocations */
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ /* 640 MiB */
+ size = <0 0x28000000>;
+ /* 1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
+ alloc-ranges = <0 0x40000000 0 0x78000000>;
+ linux,cma-default;
+ };
+ };
+};
+
+&A53_0 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_1 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_2 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_3 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&gpu {
+ status = "okay";
+};
+
+&pgc_gpu {
+ power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+ power-supply = <&sw1c_reg>;
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pfuze100: pmic@8 {
+ compatible = "fsl,pfuze100";
+ fsl,pfuze-support-disable-sw;
+ reg = <0x8>;
+
+ regulators {
+ /* VDD_GPU */
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ /* VDD_VPU */
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ /* NVCC_DRAM */
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ /* VDD_DRAM */
+ sw3a_reg: sw3ab {
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ /* 1.8 V for QSPI NOR, e-MMC IO, must not be changed */
+ nvcc_1v8_reg: sw4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-always-on;
+ };
+
+ /* not used */
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ /* VDD_PHY_0V9 */
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <975000>;
+ regulator-always-on;
+ };
+
+ /* VDD_PHY_1V8 */
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1675000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-always-on;
+ };
+
+ /* VDDA_1V8 */
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1625000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-always-on;
+ };
+
+ /* VDD_PHY_3V3 */
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3625000>;
+ regulator-always-on;
+ };
+
+ /* not used */
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+
+ sensor0: temperature-sensor-eeprom@1b {
+ compatible = "nxp,se97", "jedec,jc-42.4-temp";
+ reg = <0x1b>;
+ };
+
+ pcf85063: rtc@51 {
+ compatible = "nxp,pcf85063a";
+ reg = <0x51>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ interrupt-names = "irq";
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ quartz-load-femtofarads = <7000>;
+
+ clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ eeprom1: eeprom@53 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ read-only;
+ };
+
+ eeprom0: eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ pagesize = <32>;
+ };
+};
+
+&pcie0 {
+ /* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
+ vph-supply = <&vgen5_reg>;
+};
+
+&pcie1 {
+ /* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
+ vph-supply = <&vgen5_reg>;
+};
+
+&qspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi>;
+ assigned-clocks = <&clk IMX8MQ_CLK_QSPI>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>;
+ status = "okay";
+
+ flash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <84000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc1v8>;
+ status = "okay";
+};
+
+&vpu {
+ status = "okay";
+};
+
+/* Attention: wdog reset forcing POR needs baseboard support */
+&wdog1 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_dvfs: dvfsgrp {
+ fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x16>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f>,
+ <MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f>;
+ };
+
+ pinctrl_i2c1_gpio: i2c1gpiogrp {
+ fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_GPIO5_IO14 0x40000074>,
+ <MX8MQ_IOMUXC_I2C1_SDA_GPIO5_IO15 0x40000074>;
+ };
+
+ pinctrl_qspi: qspigrp {
+ fsl,pins = <MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x97>,
+ <MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82>,
+ <MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x97>,
+ <MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x97>,
+ <MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x97>,
+ <MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x97>;
+ };
+
+ pinctrl_rtc: rtcgrp {
+ fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x41>;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83>,
+ <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3>,
+ <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3>,
+ <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3>,
+ <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3>,
+ <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3>,
+ <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3>,
+ <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3>,
+ <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3>,
+ <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3>,
+ <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83>,
+ <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1>;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85>,
+ <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5>,
+ <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5>,
+ <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5>,
+ <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5>,
+ <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5>,
+ <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5>,
+ <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5>,
+ <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5>,
+ <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5>,
+ <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85>,
+ <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1>;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87>,
+ <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7>,
+ <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7>,
+ <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7>,
+ <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7>,
+ <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7>,
+ <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7>,
+ <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7>,
+ <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7>,
+ <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7>,
+ <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87>,
+ <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1>;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6>;
+ };
+};
projects / platform / kernel / linux-rpi.git / commitdiff