staging: wilc1000: remove unused code prior to throughput enhancement in SPI
authorAjay Singh <ajay.kathat@microchip.com>
Fri, 17 Jan 2020 10:31:27 +0000 (10:31 +0000)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 22 Jan 2020 08:53:45 +0000 (09:53 +0100)
The firmware now uses throughput enhancement code by default for SPI so
remove the previous implementation as its not used anymore. Removed the
use of 'has_thrpt_enh' element as its always true.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200117160157.8706-5-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/wilc1000/spi.c

index 8694ab5..4b883a9 100644 (file)
@@ -13,7 +13,6 @@
 struct wilc_spi {
        int crc_off;
        int nint;
-       int has_thrpt_enh;
 };
 
 static const struct wilc_hif_func wilc_hif_spi;
@@ -897,8 +896,6 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
                return 0;
        }
 
-       spi_priv->has_thrpt_enh = 1;
-
        isinit = 1;
 
        return 1;
@@ -906,154 +903,22 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
 
 static int wilc_spi_read_size(struct wilc *wilc, u32 *size)
 {
-       struct spi_device *spi = to_spi_device(wilc->dev);
-       struct wilc_spi *spi_priv = wilc->bus_data;
        int ret;
 
-       if (spi_priv->has_thrpt_enh) {
-               ret = spi_internal_read(wilc, 0xe840 - WILC_SPI_REG_BASE,
-                                       size);
-               *size = *size  & IRQ_DMA_WD_CNT_MASK;
-       } else {
-               u32 tmp;
-               u32 byte_cnt;
-
-               ret = wilc_spi_read_reg(wilc, WILC_VMM_TO_HOST_SIZE,
-                                       &byte_cnt);
-               if (!ret) {
-                       dev_err(&spi->dev,
-                               "Failed read WILC_VMM_TO_HOST_SIZE ...\n");
-                       return ret;
-               }
-               tmp = (byte_cnt >> 2) & IRQ_DMA_WD_CNT_MASK;
-               *size = tmp;
-       }
+       ret = spi_internal_read(wilc, 0xe840 - WILC_SPI_REG_BASE, size);
+       *size = *size & IRQ_DMA_WD_CNT_MASK;
 
        return ret;
 }
 
 static int wilc_spi_read_int(struct wilc *wilc, u32 *int_status)
 {
-       struct spi_device *spi = to_spi_device(wilc->dev);
-       struct wilc_spi *spi_priv = wilc->bus_data;
-       int ret;
-       u32 tmp;
-       u32 byte_cnt;
-       bool unexpected_irq;
-       int j;
-       u32 unknown_mask;
-       u32 irq_flags;
-       int k = IRG_FLAGS_OFFSET + 5;
-
-       if (spi_priv->has_thrpt_enh)
-               return spi_internal_read(wilc, 0xe840 - WILC_SPI_REG_BASE,
-                                        int_status);
-       ret = wilc_spi_read_reg(wilc, WILC_VMM_TO_HOST_SIZE, &byte_cnt);
-       if (!ret) {
-               dev_err(&spi->dev,
-                       "Failed read WILC_VMM_TO_HOST_SIZE ...\n");
-               return ret;
-       }
-       tmp = (byte_cnt >> 2) & IRQ_DMA_WD_CNT_MASK;
-
-       j = 0;
-       do {
-               wilc_spi_read_reg(wilc, 0x1a90, &irq_flags);
-               tmp |= ((irq_flags >> 27) << IRG_FLAGS_OFFSET);
-
-               if (spi_priv->nint > 5) {
-                       wilc_spi_read_reg(wilc, 0x1a94, &irq_flags);
-                       tmp |= (((irq_flags >> 0) & 0x7) << k);
-               }
-
-               unknown_mask = ~((1ul << spi_priv->nint) - 1);
-
-               unexpected_irq = (tmp >> IRG_FLAGS_OFFSET) & unknown_mask;
-               if (unexpected_irq) {
-                       dev_err(&spi->dev,
-                               "Unexpected interrupt(2):j=%d,tmp=%x,mask=%x\n",
-                               j, tmp, unknown_mask);
-               }
-
-               j++;
-       } while (unexpected_irq);
-
-       *int_status = tmp;
-
-       return ret;
+       return spi_internal_read(wilc, 0xe840 - WILC_SPI_REG_BASE, int_status);
 }
 
 static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
 {
-       struct spi_device *spi = to_spi_device(wilc->dev);
-       struct wilc_spi *spi_priv = wilc->bus_data;
-       int ret;
-       u32 flags;
-       u32 tbl_ctl;
-
-       if (spi_priv->has_thrpt_enh) {
-               return spi_internal_write(wilc, 0xe844 - WILC_SPI_REG_BASE,
-                                         val);
-       }
-
-       flags = val & (BIT(MAX_NUM_INT) - 1);
-       if (flags) {
-               int i;
-
-               ret = 1;
-               for (i = 0; i < spi_priv->nint; i++) {
-                       /*
-                        * No matter what you write 1 or 0,
-                        * it will clear interrupt.
-                        */
-                       if (flags & 1)
-                               ret = wilc_spi_write_reg(wilc,
-                                                        0x10c8 + i * 4, 1);
-                       if (!ret)
-                               break;
-                       flags >>= 1;
-               }
-               if (!ret) {
-                       dev_err(&spi->dev,
-                               "Failed wilc_spi_write_reg, set reg %x ...\n",
-                               0x10c8 + i * 4);
-                       return ret;
-               }
-               for (i = spi_priv->nint; i < MAX_NUM_INT; i++) {
-                       if (flags & 1)
-                               dev_err(&spi->dev,
-                                       "Unexpected interrupt cleared %d...\n",
-                                       i);
-                       flags >>= 1;
-               }
-       }
-
-       tbl_ctl = 0;
-       /* select VMM table 0 */
-       if (val & SEL_VMM_TBL0)
-               tbl_ctl |= BIT(0);
-       /* select VMM table 1 */
-       if (val & SEL_VMM_TBL1)
-               tbl_ctl |= BIT(1);
-
-       ret = wilc_spi_write_reg(wilc, WILC_VMM_TBL_CTL, tbl_ctl);
-       if (!ret) {
-               dev_err(&spi->dev, "fail write reg vmm_tbl_ctl...\n");
-               return ret;
-       }
-
-       if (val & EN_VMM) {
-               /*
-                * enable vmm transfer.
-                */
-               ret = wilc_spi_write_reg(wilc, WILC_VMM_CORE_CTL, 1);
-               if (!ret) {
-                       dev_err(&spi->dev, "fail write reg vmm_core_ctl...\n");
-                       return ret;
-               }
-       }
-
-       return ret;
+       return spi_internal_write(wilc, 0xe844 - WILC_SPI_REG_BASE, val);
 }
 
 static int wilc_spi_sync_ext(struct wilc *wilc, int nint)