imx: imx8qxp_mek: fix CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR

The first stage of flash.bin is larger than 584 * 512, so when
writting u-boot.itb, some data will be override. Enlarge the
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to fix boot.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

diff --git a/board/freescale/imx8qxp_mek/README b/board/freescale/imx8qxp_mek/README
index f32290e..9f2e2f7 100644 (file)
--- a/board/freescale/imx8qxp_mek/README
+++ b/board/freescale/imx8qxp_mek/README
@@ -43,7 +43,7 @@ $ export ATF_LOAD_ADDR=0x80000000
 $ export BL33_LOAD_ADDR=0x80020000
 $ make imx8qxp_mek_defconfig
 $ make flash.bin
-$ dd if=u-boot.itb of=flash.bin bs=512 seek=528
+$ dd if=u-boot.itb of=flash.bin bs=512 seek=1984
 
 Flash the binary into the SD card
 =================================

diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index c357c7b..872805c 100644 (file)
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -13,7 +13,7 @@
 #define CONFIG_SPL_MAX_SIZE                            (124 * 1024)
 #define CONFIG_SYS_MONITOR_LEN                         (1024 * 1024)
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR                0x250
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR                0x800
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION             0
 
 #define CONFIG_SPL_LDSCRIPT            "arch/arm/cpu/armv8/u-boot-spl.lds"