net: sunhme: output link status with a single print.

This driver currently prints the link status using four separate
printk calls, which these days gets presented to the user as four
distinct messages, not exactly ideal:

  [   32.582778] eth0: Link is up using
  [   32.582828] internal
  [   32.582837] transceiver at
  [   32.582888] 100Mb/s, Full Duplex.

Restructure the display_link_mode function to use a single netdev_info
call to present all this information as a single message, which is much
nicer:

  [   33.640143] hme 0000:00:01.1 eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex.

The display_forced_link_mode function has a similar structure, so adjust
it in a similar fashion.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c
index 77e5dff..8594ee8 100644 (file)
--- a/drivers/net/ethernet/sun/sunhme.c
+++ b/drivers/net/ethernet/sun/sunhme.c
@@ -545,43 +545,24 @@ static int try_next_permutation(struct happy_meal *hp, void __iomem *tregs)
 
 static void display_link_mode(struct happy_meal *hp, void __iomem *tregs)
 {
-       printk(KERN_INFO "%s: Link is up using ", hp->dev->name);
-       if (hp->tcvr_type == external)
-               printk("external ");
-       else
-               printk("internal ");
-       printk("transceiver at ");
        hp->sw_lpa = happy_meal_tcvr_read(hp, tregs, MII_LPA);
-       if (hp->sw_lpa & (LPA_100HALF | LPA_100FULL)) {
-               if (hp->sw_lpa & LPA_100FULL)
-                       printk("100Mb/s, Full Duplex.\n");
-               else
-                       printk("100Mb/s, Half Duplex.\n");
-       } else {
-               if (hp->sw_lpa & LPA_10FULL)
-                       printk("10Mb/s, Full Duplex.\n");
-               else
-                       printk("10Mb/s, Half Duplex.\n");
-       }
+
+       netdev_info(hp->dev,
+                   "Link is up using %s transceiver at %dMb/s, %s Duplex.\n",
+                   hp->tcvr_type == external ? "external" : "internal",
+                   hp->sw_lpa & (LPA_100HALF | LPA_100FULL) ? 100 : 10,
+                   hp->sw_lpa & (LPA_100FULL | LPA_10FULL) ? "Full" : "Half");
 }
 
 static void display_forced_link_mode(struct happy_meal *hp, void __iomem *tregs)
 {
-       printk(KERN_INFO "%s: Link has been forced up using ", hp->dev->name);
-       if (hp->tcvr_type == external)
-               printk("external ");
-       else
-               printk("internal ");
-       printk("transceiver at ");
        hp->sw_bmcr = happy_meal_tcvr_read(hp, tregs, MII_BMCR);
-       if (hp->sw_bmcr & BMCR_SPEED100)
-               printk("100Mb/s, ");
-       else
-               printk("10Mb/s, ");
-       if (hp->sw_bmcr & BMCR_FULLDPLX)
-               printk("Full Duplex.\n");
-       else
-               printk("Half Duplex.\n");
+
+       netdev_info(hp->dev,
+                   "Link has been forced up using %s transceiver at %dMb/s, %s Duplex.\n",
+                   hp->tcvr_type == external ? "external" : "internal",
+                   hp->sw_bmcr & BMCR_SPEED100 ? 100 : 10,
+                   hp->sw_bmcr & BMCR_FULLDPLX ? "Full" : "Half");
 }
 
 static int set_happy_link_modes(struct happy_meal *hp, void __iomem *tregs)