phy: usb: Add support for wake and USB low power mode for 7211 S2/S5

Add support for 7211 USB wake. Disable all possible 7211 USB logic
for S2/S5 if USB wake is not enabled.

On the 7211, the XHCI wake signal was not connected properly and
only goes to the USB1_USB1_CTRL_TP_DIAG1 diagonstic register.
The workaround is to have VPU code running that polls for the
proper bit in the DIAG register and to wake the system when
the bit is asserted.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

diff --git a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
index 6096982..456dc4a 100644 (file)
--- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
+++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
@@ -26,7 +26,6 @@
 #define   PIARBCTL_MISC_CAM1_MEM_PAGE_MASK             0x00000f00
 #define   PIARBCTL_MISC_CAM0_MEM_PAGE_MASK             0x000000f0
 #define   PIARBCTL_MISC_SATA_PRIORITY_MASK             0x0000000f
-#define PIARBCTL_USB_M_ASB_CTRL                0x10
 
 #define PIARBCTL_MISC_USB_ONLY_MASK            \
        (PIARBCTL_MISC_USB_SELECT_MASK |        \
@@ -51,14 +50,27 @@
 #define USB_CTRL_USB_PM_STATUS         0x08
 #define USB_CTRL_USB_DEVICE_CTL1       0x10
 #define   USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK      0x00000003
+#define USB_CTRL_TEST_PORT_CTL         0x30
+#define   USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_MASK        0x000000ff
+#define   USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_PME_GEN_MASK        0x0000002e
+#define USB_CTRL_TP_DIAG1              0x34
+#define   USB_CTLR_TP_DIAG1_wake_MASK  0x00000002
+#define USB_CTRL_CTLR_CSHCR            0x50
+#define   USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK  0x00040000
 
 /* Register definitions for the USB_PHY block in 7211b0 */
+#define USB_PHY_PLL_CTL                        0x00
+#define   USB_PHY_PLL_CTL_PLL_RESETB_MASK              0x40000000
 #define USB_PHY_PLL_LDO_CTL            0x08
 #define   USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK         0x00000004
+#define   USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK     0x00000002
+#define   USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK      0x00000001
 #define USB_PHY_UTMI_CTL_1             0x04
 #define   USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK      0x00000800
 #define   USB_PHY_UTMI_CTL_1_PHY_MODE_MASK             0x0000000c
 #define   USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT            2
+#define USB_PHY_IDDQ                   0x1c
+#define   USB_PHY_IDDQ_phy_iddq_MASK                   0x00000001
 #define USB_PHY_STATUS                 0x20
 #define   USB_PHY_STATUS_pll_lock_MASK                 0x00000001
 
@@ -199,6 +211,17 @@ static void usb_init_common(struct brcm_usb_init_params *params)
        }
 }
 
+static void usb_wake_enable_7211b0(struct brcm_usb_init_params *params,
+                                  bool enable)
+{
+       void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+
+       if (enable)
+               USB_CTRL_SET(ctrl, CTLR_CSHCR, ctl_pme_en);
+       else
+               USB_CTRL_UNSET(ctrl, CTLR_CSHCR, ctl_pme_en);
+}
+
 static void usb_init_common_7211b0(struct brcm_usb_init_params *params)
 {
        void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
@@ -210,9 +233,27 @@ static void usb_init_common_7211b0(struct brcm_usb_init_params *params)
        if (params->syscon_piarbctl)
                syscon_piarbctl_init(params->syscon_piarbctl);
 
+       USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN);
+
+       usb_wake_enable_7211b0(params, false);
+       if (!params->wake_enabled) {
+
+               /* undo possible suspend settings */
+               brcm_usb_writel(0, usb_phy + USB_PHY_IDDQ);
+               reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
+               reg |= USB_PHY_PLL_CTL_PLL_RESETB_MASK;
+               brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);
+
+               /* temporarily enable FSM so PHY comes up properly */
+               reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
+               reg |= USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK;
+               brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
+       }
+
        /* Init the PHY */
-       reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_LDO_CTL);
-       reg |= USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK;
+       reg = USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK |
+               USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK |
+               USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK;
        brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL);
 
        /* wait for lock */
@@ -276,12 +317,36 @@ static void usb_uninit_common(struct brcm_usb_init_params *params)
 
 }
 
+static void usb_uninit_common_7211b0(struct brcm_usb_init_params *params)
+{
+       void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+       void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY];
+       u32 reg;
+
+       pr_debug("%s\n", __func__);
+
+       if (params->wake_enabled) {
+               USB_CTRL_SET(ctrl, TEST_PORT_CTL, TPOUT_SEL_PME_GEN);
+               usb_wake_enable_7211b0(params, true);
+       } else {
+               USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
+               brcm_usb_writel(0, usb_phy + USB_PHY_PLL_LDO_CTL);
+               reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
+               reg &= ~USB_PHY_PLL_CTL_PLL_RESETB_MASK;
+               brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);
+               brcm_usb_writel(USB_PHY_IDDQ_phy_iddq_MASK,
+                               usb_phy + USB_PHY_IDDQ);
+       }
+
+}
+
 static void usb_uninit_xhci(struct brcm_usb_init_params *params)
 {
 
        pr_debug("%s\n", __func__);
 
-       xhci_soft_reset(params, 1);
+       if (!params->wake_enabled)
+               xhci_soft_reset(params, 1);
 }
 
 static int usb_get_dual_select(struct brcm_usb_init_params *params)
@@ -309,7 +374,6 @@ static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
        brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 }
 
-
 static const struct brcm_usb_init_ops bcm7216_ops = {
        .init_ipp = usb_init_ipp,
        .init_common = usb_init_common,
@@ -324,7 +388,7 @@ static const struct brcm_usb_init_ops bcm7211b0_ops = {
        .init_ipp = usb_init_ipp,
        .init_common = usb_init_common_7211b0,
        .init_xhci = usb_init_xhci,
-       .uninit_common = usb_uninit_common,
+       .uninit_common = usb_uninit_common_7211b0,
        .uninit_xhci = usb_uninit_xhci,
        .get_dual_select = usb_get_dual_select,
        .set_dual_select = usb_set_dual_select,
@@ -346,4 +410,5 @@ void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params)
 
        params->family_name = "7211";
        params->ops = &bcm7211b0_ops;
+       params->suspend_with_clocks = true;
 }

diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c
index 17acc3c..9391ab4 100644 (file)
--- a/drivers/phy/broadcom/phy-brcm-usb-init.c
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
@@ -783,12 +783,24 @@ static void usb_init_ipp(struct brcm_usb_init_params *params)
                msleep(50);
 }
 
+static void usb_wake_enable(struct brcm_usb_init_params *params,
+                         bool enable)
+{
+       void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
+
+       if (enable)
+               USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN);
+       else
+               USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN);
+}
+
 static void usb_init_common(struct brcm_usb_init_params *params)
 {
        u32 reg;
        void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 
        /* Clear any pending wake conditions */
+       usb_wake_enable(params, false);
        reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS));
        brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS));
 
@@ -935,6 +947,8 @@ static void usb_uninit_common(struct brcm_usb_init_params *params)
 
        if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN))
                USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN);
+       if (params->wake_enabled)
+               usb_wake_enable(params, true);
 }
 
 static void usb_uninit_eohci(struct brcm_usb_init_params *params)
@@ -978,17 +992,6 @@ static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
        }
 }
 
-static void usb_wake_enable(struct brcm_usb_init_params *params,
-                         int enable)
-{
-       void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
-
-       if (enable)
-               USB_CTRL_SET(ctrl, USB_PM, RMTWKUP_EN);
-       else
-               USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN);
-}
-
 static const struct brcm_usb_init_ops bcm7445_ops = {
        .init_ipp = usb_init_ipp,
        .init_common = usb_init_common,
@@ -999,7 +1002,6 @@ static const struct brcm_usb_init_ops bcm7445_ops = {
        .uninit_xhci = usb_uninit_xhci,
        .get_dual_select = usb_get_dual_select,
        .set_dual_select = usb_set_dual_select,
-       .wake_enable = usb_wake_enable,
 };
 
 void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params)

diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.h b/drivers/phy/broadcom/phy-brcm-usb-init.h
index 4cdd9cc..899b9eb 100644 (file)
--- a/drivers/phy/broadcom/phy-brcm-usb-init.h
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
@@ -46,8 +46,6 @@ struct brcm_usb_init_ops {
        void (*uninit_xhci)(struct brcm_usb_init_params *params);
        int  (*get_dual_select)(struct brcm_usb_init_params *params);
        void (*set_dual_select)(struct brcm_usb_init_params *params, int mode);
-       void (*wake_enable)(struct brcm_usb_init_params *params,
-                           int enable);
 };
 
 struct  brcm_usb_init_params {
@@ -62,6 +60,8 @@ struct  brcm_usb_init_params {
        const u32 *usb_reg_bits_map;
        const struct brcm_usb_init_ops *ops;
        struct regmap *syscon_piarbctl;
+       bool wake_enabled;
+       bool suspend_with_clocks;
 };
 
 void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params);
@@ -145,13 +145,6 @@ static inline void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini)
                ini->ops->uninit_xhci(ini);
 }
 
-static inline void brcm_usb_wake_enable(struct brcm_usb_init_params *ini,
-       int enable)
-{
-       if (ini->ops->wake_enable)
-               ini->ops->wake_enable(ini, enable);
-}
-
 static inline int brcm_usb_get_dual_select(struct brcm_usb_init_params *ini)
 {
        if (ini->ops->get_dual_select)

diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
index 1ab44f5..491bbd4 100644 (file)
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -535,16 +535,26 @@ static int brcm_usb_phy_suspend(struct device *dev)
        struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
 
        if (priv->init_count) {
+               priv->ini.wake_enabled = device_may_wakeup(dev);
                if (priv->phys[BRCM_USB_PHY_3_0].inited)
                        brcm_usb_uninit_xhci(&priv->ini);
                if (priv->phys[BRCM_USB_PHY_2_0].inited)
                        brcm_usb_uninit_eohci(&priv->ini);
                brcm_usb_uninit_common(&priv->ini);
-               brcm_usb_wake_enable(&priv->ini, true);
-               if (priv->phys[BRCM_USB_PHY_3_0].inited)
-                       clk_disable_unprepare(priv->usb_30_clk);
-               if (priv->phys[BRCM_USB_PHY_2_0].inited || !priv->has_eohci)
-                       clk_disable_unprepare(priv->usb_20_clk);
+
+               /*
+                * Handle the clocks unless needed for wake. This has
+                * to work for both older XHCI->3.0-clks, EOHCI->2.0-clks
+                * and newer XHCI->2.0-clks/3.0-clks.
+                */
+
+               if (!priv->ini.suspend_with_clocks) {
+                       if (priv->phys[BRCM_USB_PHY_3_0].inited)
+                               clk_disable_unprepare(priv->usb_30_clk);
+                       if (priv->phys[BRCM_USB_PHY_2_0].inited ||
+                           !priv->has_eohci)
+                               clk_disable_unprepare(priv->usb_20_clk);
+               }
                if (priv->wake_irq >= 0)
                        enable_irq_wake(priv->wake_irq);
        }
@@ -557,7 +567,6 @@ static int brcm_usb_phy_resume(struct device *dev)
 
        clk_prepare_enable(priv->usb_20_clk);
        clk_prepare_enable(priv->usb_30_clk);
-       brcm_usb_wake_enable(&priv->ini, false);
        brcm_usb_init_ipp(&priv->ini);
 
        /*
@@ -579,6 +588,8 @@ static int brcm_usb_phy_resume(struct device *dev)
                } else if (priv->has_xhci) {
                        brcm_usb_uninit_xhci(&priv->ini);
                        clk_disable_unprepare(priv->usb_30_clk);
+                       if (!priv->has_eohci)
+                               clk_disable_unprepare(priv->usb_20_clk);
                }
        } else {
                if (priv->has_xhci)
@@ -589,7 +600,7 @@ static int brcm_usb_phy_resume(struct device *dev)
                clk_disable_unprepare(priv->usb_20_clk);
                clk_disable_unprepare(priv->usb_30_clk);
        }
-
+       priv->ini.wake_enabled = false;
        return 0;
 }
 #endif /* CONFIG_PM_SLEEP */