arm64: dts: r8a7796: salvator-x: Set drive-strength for ravb pins

The EthernetAVB should not depend on the bootloader to setup correct
drive-strength values.  Values for drive-strength where found by
examining the registers after the bootloader has configured the
registers and successfully used the EthernetAVB.

Based on commit 7d73a4da2681dc5d ("arm64: dts: r8a7795: salvator-x: Set
drive-strength for ravb pins").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index 18b478b..31f0221 100644 (file)
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -110,8 +110,22 @@
        pinctrl-names = "default";
 
        avb_pins: avb {
-               groups = "avb_mdc";
-               function = "avb";
+               mux {
+                       groups = "avb_link", "avb_phy_int", "avb_mdc",
+                                "avb_mii";
+                       function = "avb";
+               };
+
+               pins_mdc {
+                       groups = "avb_mdc";
+                       drive-strength = <24>;
+               };
+
+               pins_mii_tx {
+                       pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+                              "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+                       drive-strength = <12>;
+               };
        };
 
        scif1_pins: scif1 {