* arm-tdep.c: Fix typos in comments.
* bsd-uthread.c: Ditto.
* completer.c: Ditto.
* corelow.c: Ditto.
* cp-namespace.c: Ditto.
* cp-support.c: Ditto.
* cris-tdep.c: Ditto.
* dbxread.c: Ditto.
* dwarf2read.c: Ditto.
* frame.h: Ditto.
* gdbtypes.h: Ditto.
* inferior.h: Ditto.
* mdebugread.c: Ditto.
* mips-tdep.c: Ditto.
* ppc-linux-nat.c: Ditto.
* ppc-linux-tdep.c: Ditto.
* printcmd.c: Ditto.
* sol-thread.c: Ditto.
* solib-frv.c: Ditto.
* solist.h: Ditto.
* sparc64-tdep.c: Ditto.
* spu-tdep.c: Ditto.
* stabsread.c: Ditto.
* symfile.c: Ditto.
* valops.c: Ditto.
* varobj.c: Ditto.
* vax-nat.c: Ditto.
* python/py-block.c: Ditto.
* python/py-symbol.c: Ditto.
* python/py-symtab.c: Ditto.
* python/py-value.c: Ditto.
* tui/tui-win.c: Ditto.
2011-02-25 Michael Snyder <msnyder@vmware.com>
+ * arm-tdep.c: Fix typos in comments.
+ * bsd-uthread.c: Ditto.
+ * completer.c: Ditto.
+ * corelow.c: Ditto.
+ * cp-namespace.c: Ditto.
+ * cp-support.c: Ditto.
+ * cris-tdep.c: Ditto.
+ * dbxread.c: Ditto.
+ * dwarf2read.c: Ditto.
+ * frame.h: Ditto.
+ * gdbtypes.h: Ditto.
+ * inferior.h: Ditto.
+ * mdebugread.c: Ditto.
+ * mips-tdep.c: Ditto.
+ * ppc-linux-nat.c: Ditto.
+ * ppc-linux-tdep.c: Ditto.
+ * printcmd.c: Ditto.
+ * sol-thread.c: Ditto.
+ * solib-frv.c: Ditto.
+ * solist.h: Ditto.
+ * sparc64-tdep.c: Ditto.
+ * spu-tdep.c: Ditto.
+ * stabsread.c: Ditto.
+ * symfile.c: Ditto.
+ * valops.c: Ditto.
+ * varobj.c: Ditto.
+ * vax-nat.c: Ditto.
+ * python/py-block.c: Ditto.
+ * python/py-symbol.c: Ditto.
+ * python/py-symtab.c: Ditto.
+ * python/py-value.c: Ditto.
+ * tui/tui-win.c: Ditto.
+
+2011-02-25 Michael Snyder <msnyder@vmware.com>
+
* inferior.c (print_inferior): Accept a string instead of an int
for requested_inferiors, and use get_number_or_range to parse it.
(info_inferiors_command): Pass args string to print_inferior.
|| TYPE_CODE (type) == TYPE_CODE_REF
|| TYPE_CODE (type) == TYPE_CODE_ENUM)
{
- /* If the the type is a plain integer, then the access is
- straight-forward. Otherwise we have to play around a bit more. */
+ /* If the type is a plain integer, then the access is
+ straight-forward. Otherwise we have to play around a bit
+ more. */
int len = TYPE_LENGTH (type);
int regno = ARM_A1_REGNUM;
ULONGEST tmp;
#define BSD_UTHREAD_PS_RUNNING 0
#define BSD_UTHREAD_PS_DEAD 18
-/* Address of the pointer to the the thread structure for the running
+/* Address of the pointer to the thread structure for the running
thread. */
static CORE_ADDR bsd_uthread_thread_run_addr;
}
/* Skip over the possibly quoted word STR (as defined by the quote
- characters QUOTECHARS and the the word break characters
- BREAKCHARS). Returns pointer to the location after the "word". If
- either QUOTECHARS or BREAKCHARS is NULL, use the same values used
- by the completer. */
+ characters QUOTECHARS and the word break characters BREAKCHARS).
+ Returns pointer to the location after the "word". If either
+ QUOTECHARS or BREAKCHARS is NULL, use the same values used by the
+ completer. */
char *
skip_quoted_chars (char *str, char *quotechars, char *breakchars)
/* Link a new core_fns into the global core_file_fns list. Called on
gdb startup by the _initialize routine in each core file register
- reader, to register information about each format the the reader is
+ reader, to register information about each format the reader is
prepared to handle. */
void
/* FIXME: carlton/2004-01-16: The problem that this is trying to
address is that, unfortunately, sometimes NAME is wrong: it may not
include the name of namespaces enclosing the type in question.
- lookup_transparent_type gets called when the the type in question
+ lookup_transparent_type gets called when the type in question
is a declaration, and we're trying to find its definition; but, for
declarations, our type name deduction mechanism doesn't work.
There's nothing we can do to fix this in general, I think, in the
return cp_lookup_transparent_type_loop (name, scope, 0);
}
-/* Lookup the the type definition associated to NAME in
- namespaces/classes containing SCOPE whose name is strictly longer
- than LENGTH. LENGTH must be the index of the start of a component
- of SCOPE. */
+/* Lookup the type definition associated to NAME in namespaces/classes
+ containing SCOPE whose name is strictly longer than LENGTH. LENGTH
+ must be the index of the start of a component of SCOPE. */
static struct type *
cp_lookup_transparent_type_loop (const char *name,
}
}
-/* Adds the the overload list overload candidates for FUNC_NAME found
+/* Adds the overload list overload candidates for FUNC_NAME found
through argument dependent lookup. */
struct symbol **
return;
}
/* The shift size is given as a 5 bit quick value, i.e. we don't
- want the the sign bit of the quick value. */
+ want the sign bit of the quick value. */
shift_steps = cris_get_asr_shift_steps (inst);
value = inst_env->reg[REG_PC];
if (value & SIGNED_DWORD_MASK)
{
check_assign (inst, inst_env);
- /* Get the new value for the the PC. */
+ /* Get the new value for the PC. */
newpc =
read_memory_unsigned_integer ((CORE_ADDR) inst_env->prefix_value,
4, inst_env->byte_order);
*) The assignment to namestring.
*) The call to strchr.
- *) The addition of a partial symbol the the two partial
+ *) The addition of a partial symbol the two partial
symbol lists. This last is a large section of code, so
I've imbedded it in the following macro. */
address increment value corresponding to special opcode
255. I.e., this value is scaled by the minimum
instruction length since special opcode 255 would have
- scaled the the increment. */
+ scaled the increment. */
case DW_LNS_const_add_pc:
{
CORE_ADDR adjust = (255 - lh->opcode_base) / lh->line_range;
/* For every stopped thread, GDB tracks two frames: current and
selected. Current frame is the inner most frame of the selected
- thread. Selected frame is the one being examined by the the GDB
+ thread. Selected frame is the one being examined by the GDB
CLI (selected using `up', `down', ...). The frames are created
on-demand (via get_prev_frame()) and then held in a frame cache. */
/* FIXME: cagney/2002-11-28: Er, there is a lie here. If you do the
{
/* Integral types. */
- /* Implicit size/sign (based on the the architecture's ABI). */
+ /* Implicit size/sign (based on the architecture's ABI). */
struct type *builtin_void;
struct type *builtin_char;
struct type *builtin_short;
/* If set, the inferior should be controlled in non-stop mode. In
this mode, each thread is controlled independently. Execution
- commands apply only to the the selected thread by default, and stop
+ commands apply only to the selected thread by default, and stop
events stop only the thread that had the event -- the other threads
are kept running freely. */
extern int non_stop;
}
/* If the current psymbol has an enumerated type, we need to add
- all the the enum constants to the partial symbol table. */
+ all the enum constants to the partial symbol table. */
static void
handle_psymbol_enumerators (struct objfile *objfile, FDR *fh, int stype,
len -= partial_len;
val += partial_len;
- /* Compute the the offset into the stack at which we
- will copy the next parameter.
+ /* Compute the offset into the stack at which we will
+ copy the next parameter.
In the new EABI (and the NABI32), the stack_offset
only needs to be adjusted when it has been used. */
len -= partial_len;
val += partial_len;
- /* Compute the the offset into the stack at which we
- will copy the next parameter.
+ /* Compute the offset into the stack at which we will
+ copy the next parameter.
In N32 (N64?), the stack_offset only needs to be
adjusted when it has been used. */
len -= partial_len;
val += partial_len;
- /* Compute the the offset into the stack at which we
- will copy the next parameter.
+ /* Compute the offset into the stack at which we will
+ copy the next parameter.
In older ABIs, the caller reserved space for
registers that contained arguments. This was loosely
len -= partial_len;
val += partial_len;
- /* Compute the the offset into the stack at which we
- will copy the next parameter.
+ /* Compute the offset into the stack at which we will
+ copy the next parameter.
In older ABIs, the caller reserved space for
registers that contained arguments. This was loosely
and the target PC is in $2.
* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
before the jal instruction, this is effectively a call stub
- and the the target PC is in $2. Otherwise this is effectively
+ and the target PC is in $2. Otherwise this is effectively
a return stub and the target PC is in $18.
See the source code for the stubs in gcc/config/mips/mips16.S for
/* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
before the jal instruction, this is effectively a call stub
- and the the target PC is in $2. Otherwise this is effectively
+ and the target PC is in $2. Otherwise this is effectively
a return stub and the target PC is in $18. */
else if (name[19] == 's' || name[19] == 'd')
{
typedef char gdb_vsxregset_t[SIZEOF_VSXREGS];
-/* On PPC processors that support the the Signal Processing Extension
+/* On PPC processors that support the Signal Processing Extension
(SPE) APU, the general-purpose registers are 64 bits long.
However, the ordinary Linux kernel PTRACE_PEEKUSER / PTRACE_POKEUSER
ptrace calls only access the lower half of each register, to allow
GDB itself continues to claim the general-purpose registers are 32
bits long. It has unnamed raw registers that hold the upper halves
- of the gprs, and the the full 64-bit SIMD views of the registers,
+ of the gprs, and the full 64-bit SIMD views of the registers,
'ev0' -- 'ev31', are pseudo-registers that splice the top and
bottom halves together.
/* Until November 2001, gcc did not comply with the 32 bit SysV
R4 ABI requirement that structures less than or equal to 8
bytes should be returned in registers. Instead GCC was using
- the the AIX/PowerOpen ABI - everything returned in memory
+ the AIX/PowerOpen ABI - everything returned in memory
(well ignoring vectors that is). When this was corrected, it
wasn't fixed for GNU/Linux native platform. Use the
PowerOpen struct convention. */
|| TYPE_CODE (type) == TYPE_CODE_NAMESPACE)
value_print (val, stream, options);
else
- /* User specified format, so don't look to the the type to
- tell us what to do. */
+ /* User specified format, so don't look to the type to tell us
+ what to do. */
val_print_scalar_formatted (type,
value_contents_for_printing (val),
value_embedded_offset (val),
/* Given a block, and a block_object that has previously been
allocated and initialized, populate the block_object with the
struct block data. Also, register the block_object life-cycle
- with the life-cycle of the the object file associated with this
+ with the life-cycle of the object file associated with this
block, if needed. */
static void
set_block (block_object *obj, struct block *block,
/* Given a symbol, and a symbol_object that has previously been
allocated and initialized, populate the symbol_object with the
struct symbol data. Also, register the symbol_object life-cycle
- with the life-cycle of the the object file associated with this
+ with the life-cycle of the object file associated with this
symbol, if needed. */
static void
set_symbol (symbol_object *obj, struct symbol *symbol)
self_sal->ob_type->tp_free (self);
}
-/* Given a sal, and a sal_object that has previously been
- allocated and initialized, populate the sal_object with the
- struct sal data. Also, register the sal_object life-cycle with the
- life-cycle of the the object file associated with this sal, if
- needed. If a failure occurs during the sal population, this
- function will return NULL. */
+/* Given a sal, and a sal_object that has previously been allocated
+ and initialized, populate the sal_object with the struct sal data.
+ Also, register the sal_object life-cycle with the life-cycle of the
+ object file associated with this sal, if needed. If a failure
+ occurs during the sal population, this function will return
+ NULL. */
static int
set_sal (sal_object *sal_obj, struct symtab_and_line sal)
{
/* Given a symtab, and a symtab_object that has previously been
allocated and initialized, populate the symtab_object with the
struct symtab data. Also, register the symtab_object life-cycle
- with the life-cycle of the the object file associated with this
+ with the life-cycle of the object file associated with this
symtab, if needed. */
static void
set_symtab (symtab_object *obj, struct symtab *symtab)
#include "python-internal.h"
/* Even though Python scalar types directly map to host types, we use
- target types here to remain consistent with the the values system in
+ target types here to remain consistent with the values system in
GDB (which uses target arithmetic). */
/* Python's integer type corresponds to C's long type. */
return buf;
}
-/* Return the the libthread_db state string assicoated with STATECODE.
+/* Return the libthread_db state string assicoated with STATECODE.
If STATECODE is unknown, return an appropriate message. */
static char *
/* Locate the address of the first link map struct. */
lm_addr = lm_base ();
- /* We have at least one link map entry. Fetch the the lot of them,
+ /* We have at least one link map entry. Fetch the lot of them,
building the solist chain. */
while (lm_addr)
{
void (*relocate_section_addresses) (struct so_list *so,
struct target_section *);
- /* Free the the link map info and any other private data
- structures associated with a so_list entry. */
+ /* Free the link map info and any other private data structures
+ associated with a so_list entry. */
void (*free_so) (struct so_list *so);
/* Reset or free private data structures not associated with
#include "sparc64-tdep.h"
-/* This file implements the The SPARC 64-bit ABI as defined by the
+/* This file implements the SPARC 64-bit ABI as defined by the
section "Low-Level System Information" of the SPARC Compliance
Definition (SCD) 2.4.1, which is the 64-bit System V psABI for
SPARC. */
int id = tdep->id;
/* The objfile architecture of a standalone SPU executable does not
- provide an SPU ID. Retrieve it from the the objfile's relocated
+ provide an SPU ID. Retrieve it from the objfile's relocated
address range in this special case. */
if (id == -1
&& symfile_objfile && symfile_objfile->obfd
describing the type.
PP points to a character pointer that points to the next unconsumed token
- in the the stabs string. For example, given stabs "A:T4=s4a:1,0,32;;",
+ in the stabs string. For example, given stabs "A:T4=s4a:1,0,32;;",
*PP will point to "4a:1,0,32;;".
TYPE points to an incomplete type that needs to be filled in.
/* Link SF into the global symtab_fns list. Called on startup by the
_initialize routine in each object file format reader, to register
- information about each format the the reader is prepared to
- handle. */
+ information about each format the reader is prepared to handle. */
void
add_symtab_fns (const struct sym_fns *sf)
}
-/* Resize all the windows based on the the terminal size. This
- function gets called from within the readline sinwinch handler. */
+/* Resize all the windows based on the terminal size. This function
+ gets called from within the readline sinwinch handler. */
void
tui_resize_all (void)
{
{
const char *qualified_name = NULL;
- /* If the the overload match is being search for both
- as a method and non member function, the first argument
- must now be dereferenced. */
+ /* If the overload match is being search for both as a method
+ and non member function, the first argument must now be
+ dereferenced. */
if (method == BOTH)
arg_types[0] = TYPE_TARGET_TYPE (arg_types[0]);
switch (compare_badness (func_badness, method_badness))
{
case 0: /* Top two contenders are equally good. */
- /* FIXME: GDB does not support the general ambiguous
- case. All candidates should be collected and presented
- the the user. */
+ /* FIXME: GDB does not support the general ambiguous case.
+ All candidates should be collected and presented the
+ user. */
error (_("Ambiguous overload resolution"));
break;
case 1: /* Incomparable top contenders. */
}
/* Compares the two method/function types T1 and T2 for "equality"
- with respect to the the methods' parameters. If the types of the
+ with respect to the methods' parameters. If the types of the
two parameter lists are the same, returns 1; 0 otherwise. This
comparison may ignore any artificial parameters in T1 if
SKIP_ARTIFICIAL is non-zero. This function will ALWAYS skip
after assignment, and the first thing value_assign
does is coerce the input.
For example, if we are assigning an array to a pointer variable we
- should compare the pointer with the the array's address, not with the
+ should compare the pointer with the array's address, not with the
array's content. */
value = coerce_array (value);
#include "vax-tdep.h"
#include "inf-ptrace.h"
-/* Address of the user structure. This is the the value for 32V; 3BSD
+/* Address of the user structure. This is the value for 32V; 3BSD
uses a different value, but hey, who's still using those systems? */
static CORE_ADDR vax_kernel_u_addr = 0x80020000;
projects / external / binutils.git / commitdiff