ab8500-charger: Add support for autopower on AB8505 and AB9540
authorNicolas Guion <nicolas.guion@stericsson.com>
Wed, 23 May 2012 13:59:43 +0000 (15:59 +0200)
committerLee Jones <lee.jones@linaro.org>
Wed, 23 Jan 2013 14:39:17 +0000 (14:39 +0000)
Accessing autopower register fails on the AB8505 and ab9540 as
the fallback software control register has moved.

Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
Reviewed-by: Nicolas GUION <nicolas.guion@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
drivers/power/ab8500_charger.c

index d834566..da965ee 100644 (file)
@@ -95,6 +95,8 @@
 
 #define CHG_WD_INTERVAL                        (60 * HZ)
 
+#define AB8500_SW_CONTROL_FALLBACK     0x03
+
 /* UsbLineStatus register - usb types */
 enum ab8500_charger_link_status {
        USB_STAT_NOT_CONFIGURED,
@@ -312,42 +314,58 @@ static enum power_supply_property ab8500_charger_usb_props[] = {
 static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di,
                bool fallback)
 {
+       u8 val;
        u8 reg;
+       u8 bank;
+       u8 bit;
        int ret;
 
        dev_dbg(di->dev, "SW Fallback: %d\n", fallback);
 
+       if (is_ab8500(di->parent)) {
+               bank = 0x15;
+               reg = 0x0;
+               bit = 3;
+       } else {
+               bank = AB8500_SYS_CTRL1_BLOCK;
+               reg = AB8500_SW_CONTROL_FALLBACK;
+               bit = 0;
+       }
+
        /* read the register containing fallback bit */
-       ret = abx500_get_register_interruptible(di->dev, 0x15, 0x00, &reg);
-       if (ret) {
-               dev_err(di->dev, "%d write failed\n", __LINE__);
+       ret = abx500_get_register_interruptible(di->dev, bank, reg, &val);
+       if (ret < 0) {
+               dev_err(di->dev, "%d read failed\n", __LINE__);
                return;
        }
 
-       /* enable the OPT emulation registers */
-       ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
-       if (ret) {
-               dev_err(di->dev, "%d write failed\n", __LINE__);
-               return;
+       if (is_ab8500(di->parent)) {
+               /* enable the OPT emulation registers */
+               ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
+               if (ret) {
+                       dev_err(di->dev, "%d write failed\n", __LINE__);
+                       goto disable_otp;
+               }
        }
 
        if (fallback)
-               reg |= 0x8;
+               val |= (1 << bit);
        else
-               reg &= ~0x8;
+               val &= ~(1 << bit);
 
        /* write back the changed fallback bit value to register */
-       ret = abx500_set_register_interruptible(di->dev, 0x15, 0x00, reg);
+       ret = abx500_set_register_interruptible(di->dev, bank, reg, val);
        if (ret) {
                dev_err(di->dev, "%d write failed\n", __LINE__);
-               return;
        }
 
-       /* disable the set OTP registers again */
-       ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
-       if (ret) {
-               dev_err(di->dev, "%d write failed\n", __LINE__);
-               return;
+disable_otp:
+       if (is_ab8500(di->parent)) {
+               /* disable the set OTP registers again */
+               ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
+               if (ret) {
+                       dev_err(di->dev, "%d write failed\n", __LINE__);
+               }
        }
 }