MODE_MULT_CHAN_DOWN,
};
-static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd,
- enum scan_mode scan_mode);
-#ifdef CONFIG_ISA_DMA_API
-static unsigned int labpc_suggest_transfer_size(const struct comedi_cmd *cmd);
-#endif
-
/* analog input ranges */
#define NUM_LABPC_PLUS_AI_RANGES 16
/* indicates unipolar ranges */
/* 2 bytes per sample */
static const int sample_size = 2;
-static inline int labpc_counter_load(struct comedi_device *dev,
- unsigned long base_address,
- unsigned int counter_number,
- unsigned int count, unsigned int mode)
-{
- const struct labpc_boardinfo *thisboard = comedi_board(dev);
-
- if (thisboard->memory_mapped_io)
- return i8254_mm_load((void __iomem *)base_address, 0,
- counter_number, count, mode);
- else
- return i8254_load(base_address, 0, counter_number, count, mode);
-}
-
static void labpc_clear_adc_fifo(const struct comedi_device *dev)
{
struct labpc_private *devpriv = dev->private;
devpriv->read_byte(dev->iobase + ADC_FIFO_REG);
}
-static int labpc_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
+static int labpc_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
{
+ const struct labpc_boardinfo *thisboard = comedi_board(dev);
struct labpc_private *devpriv = dev->private;
+ int i, n;
+ int chan, range;
+ int lsb, msb;
+ int timeout = 1000;
unsigned long flags;
+ /* disable timed conversions */
spin_lock_irqsave(&dev->spinlock, flags);
devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
spin_unlock_irqrestore(&dev->spinlock, flags);
+ /* disable interrupt generation and dma */
devpriv->command3_bits = 0;
devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
- return 0;
-}
-
-static enum scan_mode labpc_ai_scan_mode(const struct comedi_cmd *cmd)
-{
- if (cmd->chanlist_len == 1)
- return MODE_SINGLE_CHAN;
-
- /* chanlist may be NULL during cmdtest. */
- if (cmd->chanlist == NULL)
- return MODE_MULT_CHAN_UP;
-
- if (CR_CHAN(cmd->chanlist[0]) == CR_CHAN(cmd->chanlist[1]))
- return MODE_SINGLE_CHAN_INTERVAL;
-
- if (CR_CHAN(cmd->chanlist[0]) < CR_CHAN(cmd->chanlist[1]))
- return MODE_MULT_CHAN_UP;
-
- if (CR_CHAN(cmd->chanlist[0]) > CR_CHAN(cmd->chanlist[1]))
- return MODE_MULT_CHAN_DOWN;
+ /* set gain and channel */
+ devpriv->command1_bits = 0;
+ chan = CR_CHAN(insn->chanspec);
+ range = CR_RANGE(insn->chanspec);
+ devpriv->command1_bits |= thisboard->ai_range_code[range];
+ /* munge channel bits for differential/scan disabled mode */
+ if (CR_AREF(insn->chanspec) == AREF_DIFF)
+ chan *= 2;
+ devpriv->command1_bits |= ADC_CHAN_BITS(chan);
+ devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG);
- pr_err("ni_labpc: bug! cannot determine AI scan mode\n");
- return 0;
-}
+ /* setup command6 register for 1200 boards */
+ if (thisboard->register_layout == labpc_1200_layout) {
+ /* reference inputs to ground or common? */
+ if (CR_AREF(insn->chanspec) != AREF_GROUND)
+ devpriv->command6_bits |= ADC_COMMON_BIT;
+ else
+ devpriv->command6_bits &= ~ADC_COMMON_BIT;
+ /* bipolar or unipolar range? */
+ if (thisboard->ai_range_is_unipolar[range])
+ devpriv->command6_bits |= ADC_UNIP_BIT;
+ else
+ devpriv->command6_bits &= ~ADC_UNIP_BIT;
+ /* don't interrupt on fifo half full */
+ devpriv->command6_bits &= ~ADC_FHF_INTR_EN_BIT;
+ /* don't enable interrupt on counter a1 terminal count? */
+ devpriv->command6_bits &= ~A1_INTR_EN_BIT;
+ /* write to register */
+ devpriv->write_byte(devpriv->command6_bits,
+ dev->iobase + COMMAND6_REG);
+ }
+ /* setup command4 register */
+ devpriv->command4_bits = 0;
+ devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
+ /* single-ended/differential */
+ if (CR_AREF(insn->chanspec) == AREF_DIFF)
+ devpriv->command4_bits |= ADC_DIFF_BIT;
+ devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
-static int labpc_ai_chanlist_invalid(const struct comedi_device *dev,
- const struct comedi_cmd *cmd,
- enum scan_mode mode)
-{
- int channel, range, aref, i;
+ /*
+ * initialize pacer counter output to make sure it doesn't
+ * cause any problems
+ */
+ devpriv->write_byte(INIT_A0_BITS, dev->iobase + COUNTER_A_CONTROL_REG);
- if (cmd->chanlist == NULL)
- return 0;
+ labpc_clear_adc_fifo(dev);
- if (mode == MODE_SINGLE_CHAN)
- return 0;
+ for (n = 0; n < insn->n; n++) {
+ /* trigger conversion */
+ devpriv->write_byte(0x1, dev->iobase + ADC_CONVERT_REG);
- if (mode == MODE_SINGLE_CHAN_INTERVAL) {
- if (cmd->chanlist_len > 0xff) {
- comedi_error(dev,
- "ni_labpc: chanlist too long for single channel interval mode\n");
- return 1;
+ for (i = 0; i < timeout; i++) {
+ if (devpriv->read_byte(dev->iobase +
+ STATUS1_REG) & DATA_AVAIL_BIT)
+ break;
+ udelay(1);
}
+ if (i == timeout) {
+ comedi_error(dev, "timeout");
+ return -ETIME;
+ }
+ lsb = devpriv->read_byte(dev->iobase + ADC_FIFO_REG);
+ msb = devpriv->read_byte(dev->iobase + ADC_FIFO_REG);
+ data[n] = (msb << 8) | lsb;
}
- channel = CR_CHAN(cmd->chanlist[0]);
- range = CR_RANGE(cmd->chanlist[0]);
- aref = CR_AREF(cmd->chanlist[0]);
+ return n;
+}
- for (i = 0; i < cmd->chanlist_len; i++) {
+#ifdef CONFIG_ISA_DMA_API
+/* utility function that suggests a dma transfer size in bytes */
+static unsigned int labpc_suggest_transfer_size(const struct comedi_cmd *cmd)
+{
+ unsigned int size;
+ unsigned int freq;
- switch (mode) {
- case MODE_SINGLE_CHAN_INTERVAL:
- if (CR_CHAN(cmd->chanlist[i]) != channel) {
- comedi_error(dev,
- "channel scanning order specified in chanlist is not supported by hardware.\n");
- return 1;
- }
- break;
- case MODE_MULT_CHAN_UP:
- if (CR_CHAN(cmd->chanlist[i]) != i) {
- comedi_error(dev,
- "channel scanning order specified in chanlist is not supported by hardware.\n");
- return 1;
- }
- break;
- case MODE_MULT_CHAN_DOWN:
- if (CR_CHAN(cmd->chanlist[i]) !=
- cmd->chanlist_len - i - 1) {
- comedi_error(dev,
- "channel scanning order specified in chanlist is not supported by hardware.\n");
- return 1;
- }
- break;
- default:
- dev_err(dev->class_dev,
- "ni_labpc: bug! in chanlist check\n");
- return 1;
- break;
- }
+ if (cmd->convert_src == TRIG_TIMER)
+ freq = 1000000000 / cmd->convert_arg;
+ /* return some default value */
+ else
+ freq = 0xffffffff;
- if (CR_RANGE(cmd->chanlist[i]) != range) {
- comedi_error(dev,
- "entries in chanlist must all have the same range\n");
- return 1;
- }
+ /* make buffer fill in no more than 1/3 second */
+ size = (freq / 3) * sample_size;
- if (CR_AREF(cmd->chanlist[i]) != aref) {
- comedi_error(dev,
- "entries in chanlist must all have the same reference\n");
- return 1;
- }
- }
+ /* set a minimum and maximum size allowed */
+ if (size > dma_buffer_size)
+ size = dma_buffer_size - dma_buffer_size % sample_size;
+ else if (size < sample_size)
+ size = sample_size;
- return 0;
+ return size;
}
+#endif
static int labpc_use_continuous_mode(const struct comedi_cmd *cmd,
enum scan_mode mode)
return cmd->scan_begin_arg;
}
-static void labpc_set_ai_scan_period(struct comedi_cmd *cmd,
- enum scan_mode mode, unsigned int ns)
-{
- if (cmd->scan_begin_src != TRIG_TIMER)
- return;
+static void labpc_set_ai_scan_period(struct comedi_cmd *cmd,
+ enum scan_mode mode, unsigned int ns)
+{
+ if (cmd->scan_begin_src != TRIG_TIMER)
+ return;
+
+ if (mode == MODE_SINGLE_CHAN && cmd->convert_src == TRIG_TIMER)
+ return;
+
+ cmd->scan_begin_arg = ns;
+}
+
+/* figures out what counter values to use based on command */
+static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd,
+ enum scan_mode mode)
+{
+ struct labpc_private *devpriv = dev->private;
+ /* max value for 16 bit counter in mode 2 */
+ const int max_counter_value = 0x10000;
+ /* min value for 16 bit counter in mode 2 */
+ const int min_counter_value = 2;
+ unsigned int base_period;
+ unsigned int scan_period;
+ unsigned int convert_period;
+
+ /*
+ * if both convert and scan triggers are TRIG_TIMER, then they
+ * both rely on counter b0
+ */
+ convert_period = labpc_ai_convert_period(cmd, mode);
+ scan_period = labpc_ai_scan_period(cmd, mode);
+ if (convert_period && scan_period) {
+ /*
+ * pick the lowest b0 divisor value we can (for maximum input
+ * clock speed on convert and scan counters)
+ */
+ devpriv->divisor_b0 = (scan_period - 1) /
+ (LABPC_TIMER_BASE * max_counter_value) + 1;
+ if (devpriv->divisor_b0 < min_counter_value)
+ devpriv->divisor_b0 = min_counter_value;
+ if (devpriv->divisor_b0 > max_counter_value)
+ devpriv->divisor_b0 = max_counter_value;
+
+ base_period = LABPC_TIMER_BASE * devpriv->divisor_b0;
+
+ /* set a0 for conversion frequency and b1 for scan frequency */
+ switch (cmd->flags & TRIG_ROUND_MASK) {
+ default:
+ case TRIG_ROUND_NEAREST:
+ devpriv->divisor_a0 =
+ (convert_period + (base_period / 2)) / base_period;
+ devpriv->divisor_b1 =
+ (scan_period + (base_period / 2)) / base_period;
+ break;
+ case TRIG_ROUND_UP:
+ devpriv->divisor_a0 =
+ (convert_period + (base_period - 1)) / base_period;
+ devpriv->divisor_b1 =
+ (scan_period + (base_period - 1)) / base_period;
+ break;
+ case TRIG_ROUND_DOWN:
+ devpriv->divisor_a0 = convert_period / base_period;
+ devpriv->divisor_b1 = scan_period / base_period;
+ break;
+ }
+ /* make sure a0 and b1 values are acceptable */
+ if (devpriv->divisor_a0 < min_counter_value)
+ devpriv->divisor_a0 = min_counter_value;
+ if (devpriv->divisor_a0 > max_counter_value)
+ devpriv->divisor_a0 = max_counter_value;
+ if (devpriv->divisor_b1 < min_counter_value)
+ devpriv->divisor_b1 = min_counter_value;
+ if (devpriv->divisor_b1 > max_counter_value)
+ devpriv->divisor_b1 = max_counter_value;
+ /* write corrected timings to command */
+ labpc_set_ai_convert_period(cmd, mode,
+ base_period * devpriv->divisor_a0);
+ labpc_set_ai_scan_period(cmd, mode,
+ base_period * devpriv->divisor_b1);
+ /*
+ * if only one TRIG_TIMER is used, we can employ the generic
+ * cascaded timing functions
+ */
+ } else if (scan_period) {
+ /*
+ * calculate cascaded counter values
+ * that give desired scan timing
+ */
+ i8253_cascade_ns_to_timer_2div(LABPC_TIMER_BASE,
+ &(devpriv->divisor_b1),
+ &(devpriv->divisor_b0),
+ &scan_period,
+ cmd->flags & TRIG_ROUND_MASK);
+ labpc_set_ai_scan_period(cmd, mode, scan_period);
+ } else if (convert_period) {
+ /*
+ * calculate cascaded counter values
+ * that give desired conversion timing
+ */
+ i8253_cascade_ns_to_timer_2div(LABPC_TIMER_BASE,
+ &(devpriv->divisor_a0),
+ &(devpriv->divisor_b0),
+ &convert_period,
+ cmd->flags & TRIG_ROUND_MASK);
+ labpc_set_ai_convert_period(cmd, mode, convert_period);
+ }
+}
+
+static enum scan_mode labpc_ai_scan_mode(const struct comedi_cmd *cmd)
+{
+ if (cmd->chanlist_len == 1)
+ return MODE_SINGLE_CHAN;
+
+ /* chanlist may be NULL during cmdtest. */
+ if (cmd->chanlist == NULL)
+ return MODE_MULT_CHAN_UP;
+
+ if (CR_CHAN(cmd->chanlist[0]) == CR_CHAN(cmd->chanlist[1]))
+ return MODE_SINGLE_CHAN_INTERVAL;
+
+ if (CR_CHAN(cmd->chanlist[0]) < CR_CHAN(cmd->chanlist[1]))
+ return MODE_MULT_CHAN_UP;
+
+ if (CR_CHAN(cmd->chanlist[0]) > CR_CHAN(cmd->chanlist[1]))
+ return MODE_MULT_CHAN_DOWN;
+
+ pr_err("ni_labpc: bug! cannot determine AI scan mode\n");
+ return 0;
+}
+
+static int labpc_ai_chanlist_invalid(const struct comedi_device *dev,
+ const struct comedi_cmd *cmd,
+ enum scan_mode mode)
+{
+ int channel, range, aref, i;
+
+ if (cmd->chanlist == NULL)
+ return 0;
+
+ if (mode == MODE_SINGLE_CHAN)
+ return 0;
+
+ if (mode == MODE_SINGLE_CHAN_INTERVAL) {
+ if (cmd->chanlist_len > 0xff) {
+ comedi_error(dev,
+ "ni_labpc: chanlist too long for single channel interval mode\n");
+ return 1;
+ }
+ }
+
+ channel = CR_CHAN(cmd->chanlist[0]);
+ range = CR_RANGE(cmd->chanlist[0]);
+ aref = CR_AREF(cmd->chanlist[0]);
+
+ for (i = 0; i < cmd->chanlist_len; i++) {
+
+ switch (mode) {
+ case MODE_SINGLE_CHAN_INTERVAL:
+ if (CR_CHAN(cmd->chanlist[i]) != channel) {
+ comedi_error(dev,
+ "channel scanning order specified in chanlist is not supported by hardware.\n");
+ return 1;
+ }
+ break;
+ case MODE_MULT_CHAN_UP:
+ if (CR_CHAN(cmd->chanlist[i]) != i) {
+ comedi_error(dev,
+ "channel scanning order specified in chanlist is not supported by hardware.\n");
+ return 1;
+ }
+ break;
+ case MODE_MULT_CHAN_DOWN:
+ if (CR_CHAN(cmd->chanlist[i]) !=
+ cmd->chanlist_len - i - 1) {
+ comedi_error(dev,
+ "channel scanning order specified in chanlist is not supported by hardware.\n");
+ return 1;
+ }
+ break;
+ default:
+ dev_err(dev->class_dev,
+ "ni_labpc: bug! in chanlist check\n");
+ return 1;
+ break;
+ }
+
+ if (CR_RANGE(cmd->chanlist[i]) != range) {
+ comedi_error(dev,
+ "entries in chanlist must all have the same range\n");
+ return 1;
+ }
- if (mode == MODE_SINGLE_CHAN && cmd->convert_src == TRIG_TIMER)
- return;
+ if (CR_AREF(cmd->chanlist[i]) != aref) {
+ comedi_error(dev,
+ "entries in chanlist must all have the same reference\n");
+ return 1;
+ }
+ }
- cmd->scan_begin_arg = ns;
+ return 0;
}
static int labpc_ai_cmdtest(struct comedi_device *dev,
return 0;
}
+static inline int labpc_counter_load(struct comedi_device *dev,
+ unsigned long base_address,
+ unsigned int counter_number,
+ unsigned int count, unsigned int mode)
+{
+ const struct labpc_boardinfo *thisboard = comedi_board(dev);
+
+ if (thisboard->memory_mapped_io)
+ return i8254_mm_load((void __iomem *)base_address, 0,
+ counter_number, count, mode);
+ else
+ return i8254_load(base_address, 0, counter_number, count, mode);
+}
+
static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
const struct labpc_boardinfo *thisboard = comedi_board(dev);
return 0;
}
-static int labpc_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+static int labpc_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
{
- const struct labpc_boardinfo *thisboard = comedi_board(dev);
struct labpc_private *devpriv = dev->private;
- int i, n;
- int chan, range;
- int lsb, msb;
- int timeout = 1000;
unsigned long flags;
- /* disable timed conversions */
spin_lock_irqsave(&dev->spinlock, flags);
devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
spin_unlock_irqrestore(&dev->spinlock, flags);
- /* disable interrupt generation and dma */
devpriv->command3_bits = 0;
devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
- /* set gain and channel */
- devpriv->command1_bits = 0;
- chan = CR_CHAN(insn->chanspec);
- range = CR_RANGE(insn->chanspec);
- devpriv->command1_bits |= thisboard->ai_range_code[range];
- /* munge channel bits for differential/scan disabled mode */
- if (CR_AREF(insn->chanspec) == AREF_DIFF)
- chan *= 2;
- devpriv->command1_bits |= ADC_CHAN_BITS(chan);
- devpriv->write_byte(devpriv->command1_bits, dev->iobase + COMMAND1_REG);
-
- /* setup command6 register for 1200 boards */
- if (thisboard->register_layout == labpc_1200_layout) {
- /* reference inputs to ground or common? */
- if (CR_AREF(insn->chanspec) != AREF_GROUND)
- devpriv->command6_bits |= ADC_COMMON_BIT;
- else
- devpriv->command6_bits &= ~ADC_COMMON_BIT;
- /* bipolar or unipolar range? */
- if (thisboard->ai_range_is_unipolar[range])
- devpriv->command6_bits |= ADC_UNIP_BIT;
- else
- devpriv->command6_bits &= ~ADC_UNIP_BIT;
- /* don't interrupt on fifo half full */
- devpriv->command6_bits &= ~ADC_FHF_INTR_EN_BIT;
- /* don't enable interrupt on counter a1 terminal count? */
- devpriv->command6_bits &= ~A1_INTR_EN_BIT;
- /* write to register */
- devpriv->write_byte(devpriv->command6_bits,
- dev->iobase + COMMAND6_REG);
- }
- /* setup command4 register */
- devpriv->command4_bits = 0;
- devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
- /* single-ended/differential */
- if (CR_AREF(insn->chanspec) == AREF_DIFF)
- devpriv->command4_bits |= ADC_DIFF_BIT;
- devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
-
- /*
- * initialize pacer counter output to make sure it doesn't
- * cause any problems
- */
- devpriv->write_byte(INIT_A0_BITS, dev->iobase + COUNTER_A_CONTROL_REG);
-
- labpc_clear_adc_fifo(dev);
-
- for (n = 0; n < insn->n; n++) {
- /* trigger conversion */
- devpriv->write_byte(0x1, dev->iobase + ADC_CONVERT_REG);
-
- for (i = 0; i < timeout; i++) {
- if (devpriv->read_byte(dev->iobase +
- STATUS1_REG) & DATA_AVAIL_BIT)
- break;
- udelay(1);
- }
- if (i == timeout) {
- comedi_error(dev, "timeout");
- return -ETIME;
- }
- lsb = devpriv->read_byte(dev->iobase + ADC_FIFO_REG);
- msb = devpriv->read_byte(dev->iobase + ADC_FIFO_REG);
- data[n] = (msb << 8) | lsb;
- }
-
- return n;
-}
-
-#ifdef CONFIG_ISA_DMA_API
-/* utility function that suggests a dma transfer size in bytes */
-static unsigned int labpc_suggest_transfer_size(const struct comedi_cmd *cmd)
-{
- unsigned int size;
- unsigned int freq;
-
- if (cmd->convert_src == TRIG_TIMER)
- freq = 1000000000 / cmd->convert_arg;
- /* return some default value */
- else
- freq = 0xffffffff;
-
- /* make buffer fill in no more than 1/3 second */
- size = (freq / 3) * sample_size;
-
- /* set a minimum and maximum size allowed */
- if (size > dma_buffer_size)
- size = dma_buffer_size - dma_buffer_size % sample_size;
- else if (size < sample_size)
- size = sample_size;
-
- return size;
-}
-#endif
-
-/* figures out what counter values to use based on command */
-static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd,
- enum scan_mode mode)
-{
- struct labpc_private *devpriv = dev->private;
- /* max value for 16 bit counter in mode 2 */
- const int max_counter_value = 0x10000;
- /* min value for 16 bit counter in mode 2 */
- const int min_counter_value = 2;
- unsigned int base_period;
- unsigned int scan_period;
- unsigned int convert_period;
-
- /*
- * if both convert and scan triggers are TRIG_TIMER, then they
- * both rely on counter b0
- */
- convert_period = labpc_ai_convert_period(cmd, mode);
- scan_period = labpc_ai_scan_period(cmd, mode);
- if (convert_period && scan_period) {
- /*
- * pick the lowest b0 divisor value we can (for maximum input
- * clock speed on convert and scan counters)
- */
- devpriv->divisor_b0 = (scan_period - 1) /
- (LABPC_TIMER_BASE * max_counter_value) + 1;
- if (devpriv->divisor_b0 < min_counter_value)
- devpriv->divisor_b0 = min_counter_value;
- if (devpriv->divisor_b0 > max_counter_value)
- devpriv->divisor_b0 = max_counter_value;
-
- base_period = LABPC_TIMER_BASE * devpriv->divisor_b0;
-
- /* set a0 for conversion frequency and b1 for scan frequency */
- switch (cmd->flags & TRIG_ROUND_MASK) {
- default:
- case TRIG_ROUND_NEAREST:
- devpriv->divisor_a0 =
- (convert_period + (base_period / 2)) / base_period;
- devpriv->divisor_b1 =
- (scan_period + (base_period / 2)) / base_period;
- break;
- case TRIG_ROUND_UP:
- devpriv->divisor_a0 =
- (convert_period + (base_period - 1)) / base_period;
- devpriv->divisor_b1 =
- (scan_period + (base_period - 1)) / base_period;
- break;
- case TRIG_ROUND_DOWN:
- devpriv->divisor_a0 = convert_period / base_period;
- devpriv->divisor_b1 = scan_period / base_period;
- break;
- }
- /* make sure a0 and b1 values are acceptable */
- if (devpriv->divisor_a0 < min_counter_value)
- devpriv->divisor_a0 = min_counter_value;
- if (devpriv->divisor_a0 > max_counter_value)
- devpriv->divisor_a0 = max_counter_value;
- if (devpriv->divisor_b1 < min_counter_value)
- devpriv->divisor_b1 = min_counter_value;
- if (devpriv->divisor_b1 > max_counter_value)
- devpriv->divisor_b1 = max_counter_value;
- /* write corrected timings to command */
- labpc_set_ai_convert_period(cmd, mode,
- base_period * devpriv->divisor_a0);
- labpc_set_ai_scan_period(cmd, mode,
- base_period * devpriv->divisor_b1);
- /*
- * if only one TRIG_TIMER is used, we can employ the generic
- * cascaded timing functions
- */
- } else if (scan_period) {
- /*
- * calculate cascaded counter values
- * that give desired scan timing
- */
- i8253_cascade_ns_to_timer_2div(LABPC_TIMER_BASE,
- &(devpriv->divisor_b1),
- &(devpriv->divisor_b0),
- &scan_period,
- cmd->flags & TRIG_ROUND_MASK);
- labpc_set_ai_scan_period(cmd, mode, scan_period);
- } else if (convert_period) {
- /*
- * calculate cascaded counter values
- * that give desired conversion timing
- */
- i8253_cascade_ns_to_timer_2div(LABPC_TIMER_BASE,
- &(devpriv->divisor_a0),
- &(devpriv->divisor_b0),
- &convert_period,
- cmd->flags & TRIG_ROUND_MASK);
- labpc_set_ai_convert_period(cmd, mode, convert_period);
- }
+ return 0;
}
#ifdef CONFIG_ISA_DMA_API
projects / kernel / kernel-generic.git / commitdiff