-include include/asm-generic/Kbuild.asm
-header-y += boot.h
-header-y += bootparam.h
-header-y += debugreg.h
-header-y += e820.h
-header-y += hw_breakpoint.h
-header-y += hyperv.h
-header-y += ist.h
-header-y += ldt.h
-header-y += mce.h
-header-y += msr-index.h
-header-y += msr.h
-header-y += mtrr.h
-header-y += perf_regs.h
-header-y += posix_types_32.h
-header-y += posix_types_64.h
-header-y += posix_types_x32.h
-header-y += prctl.h
-header-y += processor-flags.h
-header-y += ptrace-abi.h
-header-y += sigcontext32.h
-header-y += svm.h
-header-y += ucontext.h
-header-y += vm86.h
-header-y += vmx.h
-header-y += vsyscall.h
genhdr-y += unistd_32.h
genhdr-y += unistd_64.h
#ifndef _ASM_X86_BOOT_H
#define _ASM_X86_BOOT_H
-/* Internal svga startup constants */
-#define NORMAL_VGA 0xffff /* 80x25 mode */
-#define EXTENDED_VGA 0xfffe /* 80x50 mode */
-#define ASK_VGA 0xfffd /* ask for it at bootup */
-
-#ifdef __KERNEL__
#include <asm/pgtable_types.h>
+#include <uapi/asm/boot.h>
/* Physical address where kernel should be loaded. */
#define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
#define BOOT_STACK_SIZE 0x1000
#endif
-#endif /* __KERNEL__ */
-
#endif /* _ASM_X86_BOOT_H */
#define _ASM_X86_DEBUGREG_H
-/* Indicate the register numbers for a number of the specific
- debug registers. Registers 0-3 contain the addresses we wish to trap on */
-#define DR_FIRSTADDR 0 /* u_debugreg[DR_FIRSTADDR] */
-#define DR_LASTADDR 3 /* u_debugreg[DR_LASTADDR] */
-
-#define DR_STATUS 6 /* u_debugreg[DR_STATUS] */
-#define DR_CONTROL 7 /* u_debugreg[DR_CONTROL] */
-
-/* Define a few things for the status register. We can use this to determine
- which debugging register was responsible for the trap. The other bits
- are either reserved or not of interest to us. */
-
-/* Define reserved bits in DR6 which are always set to 1 */
-#define DR6_RESERVED (0xFFFF0FF0)
-
-#define DR_TRAP0 (0x1) /* db0 */
-#define DR_TRAP1 (0x2) /* db1 */
-#define DR_TRAP2 (0x4) /* db2 */
-#define DR_TRAP3 (0x8) /* db3 */
-#define DR_TRAP_BITS (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)
-
-#define DR_STEP (0x4000) /* single-step */
-#define DR_SWITCH (0x8000) /* task switch */
-
-/* Now define a bunch of things for manipulating the control register.
- The top two bytes of the control register consist of 4 fields of 4
- bits - each field corresponds to one of the four debug registers,
- and indicates what types of access we trap on, and how large the data
- field is that we are looking at */
-
-#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */
-#define DR_CONTROL_SIZE 4 /* 4 control bits per register */
-
-#define DR_RW_EXECUTE (0x0) /* Settings for the access types to trap on */
-#define DR_RW_WRITE (0x1)
-#define DR_RW_READ (0x3)
-
-#define DR_LEN_1 (0x0) /* Settings for data length to trap on */
-#define DR_LEN_2 (0x4)
-#define DR_LEN_4 (0xC)
-#define DR_LEN_8 (0x8)
-
-/* The low byte to the control register determine which registers are
- enabled. There are 4 fields of two bits. One bit is "local", meaning
- that the processor will reset the bit after a task switch and the other
- is global meaning that we have to explicitly reset the bit. With linux,
- you can use either one, since we explicitly zero the register when we enter
- kernel mode. */
-
-#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit */
-#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit */
-#define DR_LOCAL_ENABLE (0x1) /* Local enable for reg 0 */
-#define DR_GLOBAL_ENABLE (0x2) /* Global enable for reg 0 */
-#define DR_ENABLE_SIZE 2 /* 2 enable bits per register */
-
-#define DR_LOCAL_ENABLE_MASK (0x55) /* Set local bits for all 4 regs */
-#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */
-
-/* The second byte to the control register has a few special things.
- We can slow the instruction pipeline for instructions coming via the
- gdt or the ldt if we want to. I am not sure why this is an advantage */
-
-#ifdef __i386__
-#define DR_CONTROL_RESERVED (0xFC00) /* Reserved by Intel */
-#else
-#define DR_CONTROL_RESERVED (0xFFFFFFFF0000FC00UL) /* Reserved */
-#endif
-
-#define DR_LOCAL_SLOWDOWN (0x100) /* Local slow the pipeline */
-#define DR_GLOBAL_SLOWDOWN (0x200) /* Global slow the pipeline */
-
-/*
- * HW breakpoint additions
- */
-#ifdef __KERNEL__
-
#include <linux/bug.h>
+#include <uapi/asm/debugreg.h>
DECLARE_PER_CPU(unsigned long, cpu_dr7);
#endif /* X86_64 */
-#endif /* __KERNEL__ */
-
#endif /* _ASM_X86_DEBUGREG_H */
#ifndef _ASM_X86_E820_H
#define _ASM_X86_E820_H
-#define E820MAP 0x2d0 /* our map */
-#define E820MAX 128 /* number of entries in E820MAP */
-/*
- * Legacy E820 BIOS limits us to 128 (E820MAX) nodes due to the
- * constrained space in the zeropage. If we have more nodes than
- * that, and if we've booted off EFI firmware, then the EFI tables
- * passed us from the EFI firmware can list more nodes. Size our
- * internal memory map tables to have room for these additional
- * nodes, based on up to three entries per node for which the
- * kernel was built: MAX_NUMNODES == (1 << CONFIG_NODES_SHIFT),
- * plus E820MAX, allowing space for the possible duplicate E820
- * entries that might need room in the same arrays, prior to the
- * call to sanitize_e820_map() to remove duplicates. The allowance
- * of three memory map entries per node is "enough" entries for
- * the initial hardware platform motivating this mechanism to make
- * use of additional EFI map entries. Future platforms may want
- * to allow more than three entries per node or otherwise refine
- * this size.
- */
-
-/*
- * Odd: 'make headers_check' complains about numa.h if I try
- * to collapse the next two #ifdef lines to a single line:
- * #if defined(__KERNEL__) && defined(CONFIG_EFI)
- */
-#ifdef __KERNEL__
#ifdef CONFIG_EFI
#include <linux/numa.h>
#define E820_X_MAX (E820MAX + 3 * MAX_NUMNODES)
#else /* ! CONFIG_EFI */
#define E820_X_MAX E820MAX
#endif
-#else /* ! __KERNEL__ */
-#define E820_X_MAX E820MAX
-#endif
-
-#define E820NR 0x1e8 /* # entries in E820MAP */
-
-#define E820_RAM 1
-#define E820_RESERVED 2
-#define E820_ACPI 3
-#define E820_NVS 4
-#define E820_UNUSABLE 5
-
-/*
- * reserved RAM used by kernel itself
- * if CONFIG_INTEL_TXT is enabled, memory of this type will be
- * included in the S3 integrity calculation and so should not include
- * any memory that BIOS might alter over the S3 transition
- */
-#define E820_RESERVED_KERN 128
-
+#include <uapi/asm/e820.h>
#ifndef __ASSEMBLY__
-#include <linux/types.h>
-struct e820entry {
- __u64 addr; /* start of memory segment */
- __u64 size; /* size of memory segment */
- __u32 type; /* type of memory segment */
-} __attribute__((packed));
-
-struct e820map {
- __u32 nr_map;
- struct e820entry map[E820_X_MAX];
-};
-
-#define ISA_START_ADDRESS 0xa0000
-#define ISA_END_ADDRESS 0x100000
-
-#define BIOS_BEGIN 0x000a0000
-#define BIOS_END 0x00100000
-
-#define BIOS_ROM_BASE 0xffe00000
-#define BIOS_ROM_END 0xffffffff
-
-#ifdef __KERNEL__
/* see comment in arch/x86/kernel/e820.c */
extern struct e820map e820;
extern struct e820map e820_saved;
return s >= ISA_START_ADDRESS && e <= ISA_END_ADDRESS;
}
-#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
-
-#ifdef __KERNEL__
#include <linux/ioport.h>
#define HIGH_MEMORY (1024*1024)
-#endif /* __KERNEL__ */
-
#endif /* _ASM_X86_E820_H */
#ifndef _I386_HW_BREAKPOINT_H
#define _I386_HW_BREAKPOINT_H
-#ifdef __KERNEL__
+#include <uapi/asm/hw_breakpoint.h>
+
#define __ARCH_HW_BREAKPOINT_H
/*
extern struct pmu perf_ops_bp;
-#endif /* __KERNEL__ */
#endif /* _I386_HW_BREAKPOINT_H */
-
-#ifndef _ASM_X86_IST_H
-#define _ASM_X86_IST_H
-
/*
* Include file for the interface to IST BIOS
* Copyright 2002 Andy Grover <andrew.grover@intel.com>
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
+#ifndef _ASM_X86_IST_H
+#define _ASM_X86_IST_H
+#include <uapi/asm/ist.h>
-#include <linux/types.h>
-
-struct ist_info {
- __u32 signature;
- __u32 command;
- __u32 event;
- __u32 perf_level;
-};
-
-#ifdef __KERNEL__
extern struct ist_info ist_info;
-#endif /* __KERNEL__ */
#endif /* _ASM_X86_IST_H */
#ifndef _ASM_X86_KVM_PARA_H
#define _ASM_X86_KVM_PARA_H
-#include <linux/types.h>
-#include <asm/hyperv.h>
-
-/* This CPUID returns the signature 'KVMKVMKVM' in ebx, ecx, and edx. It
- * should be used to determine that a VM is running under KVM.
- */
-#define KVM_CPUID_SIGNATURE 0x40000000
-
-/* This CPUID returns a feature bitmap in eax. Before enabling a particular
- * paravirtualization, the appropriate feature bit should be checked.
- */
-#define KVM_CPUID_FEATURES 0x40000001
-#define KVM_FEATURE_CLOCKSOURCE 0
-#define KVM_FEATURE_NOP_IO_DELAY 1
-#define KVM_FEATURE_MMU_OP 2
-/* This indicates that the new set of kvmclock msrs
- * are available. The use of 0x11 and 0x12 is deprecated
- */
-#define KVM_FEATURE_CLOCKSOURCE2 3
-#define KVM_FEATURE_ASYNC_PF 4
-#define KVM_FEATURE_STEAL_TIME 5
-#define KVM_FEATURE_PV_EOI 6
-
-/* The last 8 bits are used to indicate how to interpret the flags field
- * in pvclock structure. If no bits are set, all flags are ignored.
- */
-#define KVM_FEATURE_CLOCKSOURCE_STABLE_BIT 24
-
-#define MSR_KVM_WALL_CLOCK 0x11
-#define MSR_KVM_SYSTEM_TIME 0x12
-
-#define KVM_MSR_ENABLED 1
-/* Custom MSRs falls in the range 0x4b564d00-0x4b564dff */
-#define MSR_KVM_WALL_CLOCK_NEW 0x4b564d00
-#define MSR_KVM_SYSTEM_TIME_NEW 0x4b564d01
-#define MSR_KVM_ASYNC_PF_EN 0x4b564d02
-#define MSR_KVM_STEAL_TIME 0x4b564d03
-#define MSR_KVM_PV_EOI_EN 0x4b564d04
-
-struct kvm_steal_time {
- __u64 steal;
- __u32 version;
- __u32 flags;
- __u32 pad[12];
-};
-
-#define KVM_STEAL_ALIGNMENT_BITS 5
-#define KVM_STEAL_VALID_BITS ((-1ULL << (KVM_STEAL_ALIGNMENT_BITS + 1)))
-#define KVM_STEAL_RESERVED_MASK (((1 << KVM_STEAL_ALIGNMENT_BITS) - 1 ) << 1)
-
-#define KVM_MAX_MMU_OP_BATCH 32
-
-#define KVM_ASYNC_PF_ENABLED (1 << 0)
-#define KVM_ASYNC_PF_SEND_ALWAYS (1 << 1)
-
-/* Operations for KVM_HC_MMU_OP */
-#define KVM_MMU_OP_WRITE_PTE 1
-#define KVM_MMU_OP_FLUSH_TLB 2
-#define KVM_MMU_OP_RELEASE_PT 3
-
-/* Payload for KVM_HC_MMU_OP */
-struct kvm_mmu_op_header {
- __u32 op;
- __u32 pad;
-};
-
-struct kvm_mmu_op_write_pte {
- struct kvm_mmu_op_header header;
- __u64 pte_phys;
- __u64 pte_val;
-};
-
-struct kvm_mmu_op_flush_tlb {
- struct kvm_mmu_op_header header;
-};
-
-struct kvm_mmu_op_release_pt {
- struct kvm_mmu_op_header header;
- __u64 pt_phys;
-};
-
-#define KVM_PV_REASON_PAGE_NOT_PRESENT 1
-#define KVM_PV_REASON_PAGE_READY 2
-
-struct kvm_vcpu_pv_apf_data {
- __u32 reason;
- __u8 pad[60];
- __u32 enabled;
-};
-
-#define KVM_PV_EOI_BIT 0
-#define KVM_PV_EOI_MASK (0x1 << KVM_PV_EOI_BIT)
-#define KVM_PV_EOI_ENABLED KVM_PV_EOI_MASK
-#define KVM_PV_EOI_DISABLED 0x0
-
-#ifdef __KERNEL__
#include <asm/processor.h>
+#include <uapi/asm/kvm_para.h>
extern void kvmclock_init(void);
extern int kvm_register_clock(char *txt);
}
#endif
-#endif /* __KERNEL__ */
-
#endif /* _ASM_X86_KVM_PARA_H */
#ifndef _ASM_X86_MCE_H
#define _ASM_X86_MCE_H
-#include <linux/types.h>
-#include <asm/ioctls.h>
+#include <uapi/asm/mce.h>
-/*
- * Machine Check support for x86
- */
-
-/* MCG_CAP register defines */
-#define MCG_BANKCNT_MASK 0xff /* Number of Banks */
-#define MCG_CTL_P (1ULL<<8) /* MCG_CTL register available */
-#define MCG_EXT_P (1ULL<<9) /* Extended registers available */
-#define MCG_CMCI_P (1ULL<<10) /* CMCI supported */
-#define MCG_EXT_CNT_MASK 0xff0000 /* Number of Extended registers */
-#define MCG_EXT_CNT_SHIFT 16
-#define MCG_EXT_CNT(c) (((c) & MCG_EXT_CNT_MASK) >> MCG_EXT_CNT_SHIFT)
-#define MCG_SER_P (1ULL<<24) /* MCA recovery/new status bits */
-
-/* MCG_STATUS register defines */
-#define MCG_STATUS_RIPV (1ULL<<0) /* restart ip valid */
-#define MCG_STATUS_EIPV (1ULL<<1) /* ip points to correct instruction */
-#define MCG_STATUS_MCIP (1ULL<<2) /* machine check in progress */
-
-/* MCi_STATUS register defines */
-#define MCI_STATUS_VAL (1ULL<<63) /* valid error */
-#define MCI_STATUS_OVER (1ULL<<62) /* previous errors lost */
-#define MCI_STATUS_UC (1ULL<<61) /* uncorrected error */
-#define MCI_STATUS_EN (1ULL<<60) /* error enabled */
-#define MCI_STATUS_MISCV (1ULL<<59) /* misc error reg. valid */
-#define MCI_STATUS_ADDRV (1ULL<<58) /* addr reg. valid */
-#define MCI_STATUS_PCC (1ULL<<57) /* processor context corrupt */
-#define MCI_STATUS_S (1ULL<<56) /* Signaled machine check */
-#define MCI_STATUS_AR (1ULL<<55) /* Action required */
-#define MCACOD 0xffff /* MCA Error Code */
-
-/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */
-#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */
-#define MCACOD_SCRUBMSK 0xfff0
-#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */
-#define MCACOD_DATA 0x0134 /* Data Load */
-#define MCACOD_INSTR 0x0150 /* Instruction Fetch */
-
-/* MCi_MISC register defines */
-#define MCI_MISC_ADDR_LSB(m) ((m) & 0x3f)
-#define MCI_MISC_ADDR_MODE(m) (((m) >> 6) & 7)
-#define MCI_MISC_ADDR_SEGOFF 0 /* segment offset */
-#define MCI_MISC_ADDR_LINEAR 1 /* linear address */
-#define MCI_MISC_ADDR_PHYS 2 /* physical address */
-#define MCI_MISC_ADDR_MEM 3 /* memory address */
-#define MCI_MISC_ADDR_GENERIC 7 /* generic */
-
-/* CTL2 register defines */
-#define MCI_CTL2_CMCI_EN (1ULL << 30)
-#define MCI_CTL2_CMCI_THRESHOLD_MASK 0x7fffULL
-
-#define MCJ_CTX_MASK 3
-#define MCJ_CTX(flags) ((flags) & MCJ_CTX_MASK)
-#define MCJ_CTX_RANDOM 0 /* inject context: random */
-#define MCJ_CTX_PROCESS 0x1 /* inject context: process */
-#define MCJ_CTX_IRQ 0x2 /* inject context: IRQ */
-#define MCJ_NMI_BROADCAST 0x4 /* do NMI broadcasting */
-#define MCJ_EXCEPTION 0x8 /* raise as exception */
-#define MCJ_IRQ_BRAODCAST 0x10 /* do IRQ broadcasting */
-
-/* Fields are zero when not available */
-struct mce {
- __u64 status;
- __u64 misc;
- __u64 addr;
- __u64 mcgstatus;
- __u64 ip;
- __u64 tsc; /* cpu time stamp counter */
- __u64 time; /* wall time_t when error was detected */
- __u8 cpuvendor; /* cpu vendor as encoded in system.h */
- __u8 inject_flags; /* software inject flags */
- __u16 pad;
- __u32 cpuid; /* CPUID 1 EAX */
- __u8 cs; /* code segment */
- __u8 bank; /* machine check bank */
- __u8 cpu; /* cpu number; obsolete; use extcpu now */
- __u8 finished; /* entry is valid */
- __u32 extcpu; /* linux cpu number that detected the error */
- __u32 socketid; /* CPU socket ID */
- __u32 apicid; /* CPU initial apic ID */
- __u64 mcgcap; /* MCGCAP MSR: machine check capabilities of CPU */
-};
-
-/*
- * This structure contains all data related to the MCE log. Also
- * carries a signature to make it easier to find from external
- * debugging tools. Each entry is only valid when its finished flag
- * is set.
- */
-
-#define MCE_LOG_LEN 32
-
-struct mce_log {
- char signature[12]; /* "MACHINECHECK" */
- unsigned len; /* = MCE_LOG_LEN */
- unsigned next;
- unsigned flags;
- unsigned recordlen; /* length of struct mce */
- struct mce entry[MCE_LOG_LEN];
-};
-
-#define MCE_OVERFLOW 0 /* bit 0 in flags means overflow */
-
-#define MCE_LOG_SIGNATURE "MACHINECHECK"
-
-#define MCE_GET_RECORD_LEN _IOR('M', 1, int)
-#define MCE_GET_LOG_LEN _IOR('M', 2, int)
-#define MCE_GETCLEAR_FLAGS _IOR('M', 3, int)
-
-/* Software defined banks */
-#define MCE_EXTENDED_BANK 128
-#define MCE_THERMAL_BANK MCE_EXTENDED_BANK + 0
-#define K8_MCE_THRESHOLD_BASE (MCE_EXTENDED_BANK + 1)
-
-#ifdef __KERNEL__
struct mca_config {
bool dont_log_ce;
extern void apei_mce_report_mem_error(int corrected,
struct cper_sec_mem_err *mem_err);
-#endif /* __KERNEL__ */
#endif /* _ASM_X86_MCE_H */
#ifndef _ASM_X86_MSR_H
#define _ASM_X86_MSR_H
-#include <asm/msr-index.h>
+#include <uapi/asm/msr.h>
#ifndef __ASSEMBLY__
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#define X86_IOC_RDMSR_REGS _IOWR('c', 0xA0, __u32[8])
-#define X86_IOC_WRMSR_REGS _IOWR('c', 0xA1, __u32[8])
-
-#ifdef __KERNEL__
-
#include <asm/asm.h>
#include <asm/errno.h>
#include <asm/cpumask.h>
return wrmsr_safe_regs(regs);
}
#endif /* CONFIG_SMP */
-#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
#endif /* _ASM_X86_MSR_H */
#ifndef _ASM_X86_MTRR_H
#define _ASM_X86_MTRR_H
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/errno.h>
+#include <uapi/asm/mtrr.h>
-#define MTRR_IOCTL_BASE 'M'
-
-/* Warning: this structure has a different order from i386
- on x86-64. The 32bit emulation code takes care of that.
- But you need to use this for 64bit, otherwise your X server
- will break. */
-
-#ifdef __i386__
-struct mtrr_sentry {
- unsigned long base; /* Base address */
- unsigned int size; /* Size of region */
- unsigned int type; /* Type of region */
-};
-
-struct mtrr_gentry {
- unsigned int regnum; /* Register number */
- unsigned long base; /* Base address */
- unsigned int size; /* Size of region */
- unsigned int type; /* Type of region */
-};
-
-#else /* __i386__ */
-
-struct mtrr_sentry {
- __u64 base; /* Base address */
- __u32 size; /* Size of region */
- __u32 type; /* Type of region */
-};
-
-struct mtrr_gentry {
- __u64 base; /* Base address */
- __u32 size; /* Size of region */
- __u32 regnum; /* Register number */
- __u32 type; /* Type of region */
- __u32 _pad; /* Unused */
-};
-
-#endif /* !__i386__ */
-
-struct mtrr_var_range {
- __u32 base_lo;
- __u32 base_hi;
- __u32 mask_lo;
- __u32 mask_hi;
-};
-
-/* In the Intel processor's MTRR interface, the MTRR type is always held in
- an 8 bit field: */
-typedef __u8 mtrr_type;
-
-#define MTRR_NUM_FIXED_RANGES 88
-#define MTRR_MAX_VAR_RANGES 256
-
-struct mtrr_state_type {
- struct mtrr_var_range var_ranges[MTRR_MAX_VAR_RANGES];
- mtrr_type fixed_ranges[MTRR_NUM_FIXED_RANGES];
- unsigned char enabled;
- unsigned char have_fixed;
- mtrr_type def_type;
-};
-
-#define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg))
-#define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1)
-
-/* These are the various ioctls */
-#define MTRRIOC_ADD_ENTRY _IOW(MTRR_IOCTL_BASE, 0, struct mtrr_sentry)
-#define MTRRIOC_SET_ENTRY _IOW(MTRR_IOCTL_BASE, 1, struct mtrr_sentry)
-#define MTRRIOC_DEL_ENTRY _IOW(MTRR_IOCTL_BASE, 2, struct mtrr_sentry)
-#define MTRRIOC_GET_ENTRY _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry)
-#define MTRRIOC_KILL_ENTRY _IOW(MTRR_IOCTL_BASE, 4, struct mtrr_sentry)
-#define MTRRIOC_ADD_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 5, struct mtrr_sentry)
-#define MTRRIOC_SET_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 6, struct mtrr_sentry)
-#define MTRRIOC_DEL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 7, struct mtrr_sentry)
-#define MTRRIOC_GET_PAGE_ENTRY _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry)
-#define MTRRIOC_KILL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 9, struct mtrr_sentry)
-
-/* These are the region types */
-#define MTRR_TYPE_UNCACHABLE 0
-#define MTRR_TYPE_WRCOMB 1
-/*#define MTRR_TYPE_ 2*/
-/*#define MTRR_TYPE_ 3*/
-#define MTRR_TYPE_WRTHROUGH 4
-#define MTRR_TYPE_WRPROT 5
-#define MTRR_TYPE_WRBACK 6
-#define MTRR_NUM_TYPES 7
-
-#ifdef __KERNEL__
/* The following functions are for use by other drivers */
# ifdef CONFIG_MTRR
_IOW(MTRR_IOCTL_BASE, 9, struct mtrr_sentry32)
#endif /* CONFIG_COMPAT */
-#endif /* __KERNEL__ */
-
#endif /* _ASM_X86_MTRR_H */
-#ifdef __KERNEL__
# ifdef CONFIG_X86_32
# include <asm/posix_types_32.h>
# else
# include <asm/posix_types_64.h>
# endif
-#else
-# ifdef __i386__
-# include <asm/posix_types_32.h>
-# elif defined(__ILP32__)
-# include <asm/posix_types_x32.h>
-# else
-# include <asm/posix_types_64.h>
-# endif
-#endif
#ifndef _ASM_X86_PROCESSOR_FLAGS_H
#define _ASM_X86_PROCESSOR_FLAGS_H
-/* Various flags defined: can be included from assembler. */
-/*
- * EFLAGS bits
- */
-#define X86_EFLAGS_CF 0x00000001 /* Carry Flag */
-#define X86_EFLAGS_BIT1 0x00000002 /* Bit 1 - always on */
-#define X86_EFLAGS_PF 0x00000004 /* Parity Flag */
-#define X86_EFLAGS_AF 0x00000010 /* Auxiliary carry Flag */
-#define X86_EFLAGS_ZF 0x00000040 /* Zero Flag */
-#define X86_EFLAGS_SF 0x00000080 /* Sign Flag */
-#define X86_EFLAGS_TF 0x00000100 /* Trap Flag */
-#define X86_EFLAGS_IF 0x00000200 /* Interrupt Flag */
-#define X86_EFLAGS_DF 0x00000400 /* Direction Flag */
-#define X86_EFLAGS_OF 0x00000800 /* Overflow Flag */
-#define X86_EFLAGS_IOPL 0x00003000 /* IOPL mask */
-#define X86_EFLAGS_NT 0x00004000 /* Nested Task */
-#define X86_EFLAGS_RF 0x00010000 /* Resume Flag */
-#define X86_EFLAGS_VM 0x00020000 /* Virtual Mode */
-#define X86_EFLAGS_AC 0x00040000 /* Alignment Check */
-#define X86_EFLAGS_VIF 0x00080000 /* Virtual Interrupt Flag */
-#define X86_EFLAGS_VIP 0x00100000 /* Virtual Interrupt Pending */
-#define X86_EFLAGS_ID 0x00200000 /* CPUID detection flag */
+#include <uapi/asm/processor-flags.h>
-/*
- * Basic CPU control in CR0
- */
-#define X86_CR0_PE 0x00000001 /* Protection Enable */
-#define X86_CR0_MP 0x00000002 /* Monitor Coprocessor */
-#define X86_CR0_EM 0x00000004 /* Emulation */
-#define X86_CR0_TS 0x00000008 /* Task Switched */
-#define X86_CR0_ET 0x00000010 /* Extension Type */
-#define X86_CR0_NE 0x00000020 /* Numeric Error */
-#define X86_CR0_WP 0x00010000 /* Write Protect */
-#define X86_CR0_AM 0x00040000 /* Alignment Mask */
-#define X86_CR0_NW 0x20000000 /* Not Write-through */
-#define X86_CR0_CD 0x40000000 /* Cache Disable */
-#define X86_CR0_PG 0x80000000 /* Paging */
-
-/*
- * Paging options in CR3
- */
-#define X86_CR3_PWT 0x00000008 /* Page Write Through */
-#define X86_CR3_PCD 0x00000010 /* Page Cache Disable */
-#define X86_CR3_PCID_MASK 0x00000fff /* PCID Mask */
-
-/*
- * Intel CPU features in CR4
- */
-#define X86_CR4_VME 0x00000001 /* enable vm86 extensions */
-#define X86_CR4_PVI 0x00000002 /* virtual interrupts flag enable */
-#define X86_CR4_TSD 0x00000004 /* disable time stamp at ipl 3 */
-#define X86_CR4_DE 0x00000008 /* enable debugging extensions */
-#define X86_CR4_PSE 0x00000010 /* enable page size extensions */
-#define X86_CR4_PAE 0x00000020 /* enable physical address extensions */
-#define X86_CR4_MCE 0x00000040 /* Machine check enable */
-#define X86_CR4_PGE 0x00000080 /* enable global pages */
-#define X86_CR4_PCE 0x00000100 /* enable performance counters at ipl 3 */
-#define X86_CR4_OSFXSR 0x00000200 /* enable fast FPU save and restore */
-#define X86_CR4_OSXMMEXCPT 0x00000400 /* enable unmasked SSE exceptions */
-#define X86_CR4_VMXE 0x00002000 /* enable VMX virtualization */
-#define X86_CR4_RDWRGSFS 0x00010000 /* enable RDWRGSFS support */
-#define X86_CR4_PCIDE 0x00020000 /* enable PCID support */
-#define X86_CR4_OSXSAVE 0x00040000 /* enable xsave and xrestore */
-#define X86_CR4_SMEP 0x00100000 /* enable SMEP support */
-#define X86_CR4_SMAP 0x00200000 /* enable SMAP support */
-
-/*
- * x86-64 Task Priority Register, CR8
- */
-#define X86_CR8_TPR 0x0000000F /* task priority register */
-
-/*
- * AMD and Transmeta use MSRs for configuration; see <asm/msr-index.h>
- */
-
-/*
- * NSC/Cyrix CPU configuration register indexes
- */
-#define CX86_PCR0 0x20
-#define CX86_GCR 0xb8
-#define CX86_CCR0 0xc0
-#define CX86_CCR1 0xc1
-#define CX86_CCR2 0xc2
-#define CX86_CCR3 0xc3
-#define CX86_CCR4 0xe8
-#define CX86_CCR5 0xe9
-#define CX86_CCR6 0xea
-#define CX86_CCR7 0xeb
-#define CX86_PCR1 0xf0
-#define CX86_DIR0 0xfe
-#define CX86_DIR1 0xff
-#define CX86_ARR_BASE 0xc4
-#define CX86_RCR_BASE 0xdc
-
-#ifdef __KERNEL__
#ifdef CONFIG_VM86
#define X86_VM_MASK X86_EFLAGS_VM
#else
#define X86_VM_MASK 0 /* No VM86 support */
#endif
-#endif
-
#endif /* _ASM_X86_PROCESSOR_FLAGS_H */
#ifndef _ASM_X86_PTRACE_H
#define _ASM_X86_PTRACE_H
-#include <linux/compiler.h> /* For __user */
-#include <asm/ptrace-abi.h>
-#include <asm/processor-flags.h>
-
-#ifdef __KERNEL__
#include <asm/segment.h>
#include <asm/page_types.h>
-#endif
+#include <uapi/asm/ptrace.h>
#ifndef __ASSEMBLY__
-
#ifdef __i386__
-/* this struct defines the way the registers are stored on the
- stack during a system call. */
-
-#ifndef __KERNEL__
-
-struct pt_regs {
- long ebx;
- long ecx;
- long edx;
- long esi;
- long edi;
- long ebp;
- long eax;
- int xds;
- int xes;
- int xfs;
- int xgs;
- long orig_eax;
- long eip;
- int xcs;
- long eflags;
- long esp;
- int xss;
-};
-
-#else /* __KERNEL__ */
struct pt_regs {
unsigned long bx;
unsigned long ss;
};
-#endif /* __KERNEL__ */
-
#else /* __i386__ */
-#ifndef __KERNEL__
-
-struct pt_regs {
- unsigned long r15;
- unsigned long r14;
- unsigned long r13;
- unsigned long r12;
- unsigned long rbp;
- unsigned long rbx;
-/* arguments: non interrupts/non tracing syscalls only save up to here*/
- unsigned long r11;
- unsigned long r10;
- unsigned long r9;
- unsigned long r8;
- unsigned long rax;
- unsigned long rcx;
- unsigned long rdx;
- unsigned long rsi;
- unsigned long rdi;
- unsigned long orig_rax;
-/* end of arguments */
-/* cpu exception frame or undefined */
- unsigned long rip;
- unsigned long cs;
- unsigned long eflags;
- unsigned long rsp;
- unsigned long ss;
-/* top of stack page */
-};
-
-#else /* __KERNEL__ */
-
struct pt_regs {
unsigned long r15;
unsigned long r14;
/* top of stack page */
};
-#endif /* __KERNEL__ */
#endif /* !__i386__ */
-
-#ifdef __KERNEL__
-
#include <linux/init.h>
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt_types.h>
extern int do_set_thread_area(struct task_struct *p, int idx,
struct user_desc __user *info, int can_allocate);
-#endif /* __KERNEL__ */
-
#endif /* !__ASSEMBLY__ */
-
#endif /* _ASM_X86_PTRACE_H */
#ifndef _ASM_X86_SETUP_H
#define _ASM_X86_SETUP_H
-#ifdef __KERNEL__
+#include <uapi/asm/setup.h>
+
#define COMMAND_LINE_SIZE 2048
.size .brk.name,.-1b; \
.popsection
#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
#endif /* _ASM_X86_SETUP_H */
#ifndef _ASM_X86_SIGCONTEXT_H
#define _ASM_X86_SIGCONTEXT_H
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-#define FP_XSTATE_MAGIC1 0x46505853U
-#define FP_XSTATE_MAGIC2 0x46505845U
-#define FP_XSTATE_MAGIC2_SIZE sizeof(FP_XSTATE_MAGIC2)
-
-/*
- * bytes 464..511 in the current 512byte layout of fxsave/fxrstor frame
- * are reserved for SW usage. On cpu's supporting xsave/xrstor, these bytes
- * are used to extended the fpstate pointer in the sigcontext, which now
- * includes the extended state information along with fpstate information.
- *
- * Presence of FP_XSTATE_MAGIC1 at the beginning of this SW reserved
- * area and FP_XSTATE_MAGIC2 at the end of memory layout
- * (extended_size - FP_XSTATE_MAGIC2_SIZE) indicates the presence of the
- * extended state information in the memory layout pointed by the fpstate
- * pointer in sigcontext.
- */
-struct _fpx_sw_bytes {
- __u32 magic1; /* FP_XSTATE_MAGIC1 */
- __u32 extended_size; /* total size of the layout referred by
- * fpstate pointer in the sigcontext.
- */
- __u64 xstate_bv;
- /* feature bit mask (including fp/sse/extended
- * state) that is present in the memory
- * layout.
- */
- __u32 xstate_size; /* actual xsave state size, based on the
- * features saved in the layout.
- * 'extended_size' will be greater than
- * 'xstate_size'.
- */
- __u32 padding[7]; /* for future use. */
-};
+#include <uapi/asm/sigcontext.h>
#ifdef __i386__
-/*
- * As documented in the iBCS2 standard..
- *
- * The first part of "struct _fpstate" is just the normal i387
- * hardware setup, the extra "status" word is used to save the
- * coprocessor status word before entering the handler.
- *
- * Pentium III FXSR, SSE support
- * Gareth Hughes <gareth@valinux.com>, May 2000
- *
- * The FPU state data structure has had to grow to accommodate the
- * extended FPU state required by the Streaming SIMD Extensions.
- * There is no documented standard to accomplish this at the moment.
- */
-struct _fpreg {
- unsigned short significand[4];
- unsigned short exponent;
-};
-
-struct _fpxreg {
- unsigned short significand[4];
- unsigned short exponent;
- unsigned short padding[3];
-};
-
-struct _xmmreg {
- unsigned long element[4];
-};
-
-struct _fpstate {
- /* Regular FPU environment */
- unsigned long cw;
- unsigned long sw;
- unsigned long tag;
- unsigned long ipoff;
- unsigned long cssel;
- unsigned long dataoff;
- unsigned long datasel;
- struct _fpreg _st[8];
- unsigned short status;
- unsigned short magic; /* 0xffff = regular FPU data only */
-
- /* FXSR FPU environment */
- unsigned long _fxsr_env[6]; /* FXSR FPU env is ignored */
- unsigned long mxcsr;
- unsigned long reserved;
- struct _fpxreg _fxsr_st[8]; /* FXSR FPU reg data is ignored */
- struct _xmmreg _xmm[8];
- unsigned long padding1[44];
-
- union {
- unsigned long padding2[12];
- struct _fpx_sw_bytes sw_reserved; /* represents the extended
- * state info */
- };
-};
-
-#define X86_FXSR_MAGIC 0x0000
-
-#ifdef __KERNEL__
struct sigcontext {
unsigned short gs, __gsh;
unsigned short fs, __fsh;
unsigned long oldmask;
unsigned long cr2;
};
-#else /* __KERNEL__ */
-/*
- * User-space might still rely on the old definition:
- */
-struct sigcontext {
- unsigned short gs, __gsh;
- unsigned short fs, __fsh;
- unsigned short es, __esh;
- unsigned short ds, __dsh;
- unsigned long edi;
- unsigned long esi;
- unsigned long ebp;
- unsigned long esp;
- unsigned long ebx;
- unsigned long edx;
- unsigned long ecx;
- unsigned long eax;
- unsigned long trapno;
- unsigned long err;
- unsigned long eip;
- unsigned short cs, __csh;
- unsigned long eflags;
- unsigned long esp_at_signal;
- unsigned short ss, __ssh;
- struct _fpstate __user *fpstate;
- unsigned long oldmask;
- unsigned long cr2;
-};
-#endif /* !__KERNEL__ */
-
#else /* __i386__ */
-
-/* FXSAVE frame */
-/* Note: reserved1/2 may someday contain valuable data. Always save/restore
- them when you change signal frames. */
-struct _fpstate {
- __u16 cwd;
- __u16 swd;
- __u16 twd; /* Note this is not the same as the
- 32bit/x87/FSAVE twd */
- __u16 fop;
- __u64 rip;
- __u64 rdp;
- __u32 mxcsr;
- __u32 mxcsr_mask;
- __u32 st_space[32]; /* 8*16 bytes for each FP-reg */
- __u32 xmm_space[64]; /* 16*16 bytes for each XMM-reg */
- __u32 reserved2[12];
- union {
- __u32 reserved3[12];
- struct _fpx_sw_bytes sw_reserved; /* represents the extended
- * state information */
- };
-};
-
-#ifdef __KERNEL__
struct sigcontext {
unsigned long r8;
unsigned long r9;
void __user *fpstate; /* zero when no FPU/extended context */
unsigned long reserved1[8];
};
-#else /* __KERNEL__ */
-/*
- * User-space might still rely on the old definition:
- */
-struct sigcontext {
- __u64 r8;
- __u64 r9;
- __u64 r10;
- __u64 r11;
- __u64 r12;
- __u64 r13;
- __u64 r14;
- __u64 r15;
- __u64 rdi;
- __u64 rsi;
- __u64 rbp;
- __u64 rbx;
- __u64 rdx;
- __u64 rax;
- __u64 rcx;
- __u64 rsp;
- __u64 rip;
- __u64 eflags; /* RFLAGS */
- __u16 cs;
- __u16 gs;
- __u16 fs;
- __u16 __pad0;
- __u64 err;
- __u64 trapno;
- __u64 oldmask;
- __u64 cr2;
- struct _fpstate __user *fpstate; /* zero when no FPU context */
-#ifdef __ILP32__
- __u32 __fpstate_pad;
-#endif
- __u64 reserved1[8];
-};
-#endif /* !__KERNEL__ */
-
#endif /* !__i386__ */
-
-struct _xsave_hdr {
- __u64 xstate_bv;
- __u64 reserved1[2];
- __u64 reserved2[5];
-};
-
-struct _ymmh_state {
- /* 16 * 16 bytes for each YMMH-reg */
- __u32 ymmh_space[64];
-};
-
-/*
- * Extended state pointed by the fpstate pointer in the sigcontext.
- * In addition to the fpstate, information encoded in the xstate_hdr
- * indicates the presence of other extended state information
- * supported by the processor and OS.
- */
-struct _xstate {
- struct _fpstate fpstate;
- struct _xsave_hdr xstate_hdr;
- struct _ymmh_state ymmh;
- /* new processor state extensions go here */
-};
-
#endif /* _ASM_X86_SIGCONTEXT_H */
#define _ASM_X86_SIGNAL_H
#ifndef __ASSEMBLY__
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/compiler.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#ifdef __KERNEL__
#include <linux/linkage.h>
/* Most things should be clean enough to redefine this at will, if care
typedef sigset_t compat_sigset_t;
#endif
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#define NSIG 32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001u
-#define SA_NOCLDWAIT 0x00000002u
-#define SA_SIGINFO 0x00000004u
-#define SA_ONSTACK 0x08000000u
-#define SA_RESTART 0x10000000u
-#define SA_NODEFER 0x40000000u
-#define SA_RESETHAND 0x80000000u
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-#define SA_RESTORER 0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#include <asm-generic/signal-defs.h>
-
+#include <uapi/asm/signal.h>
#ifndef __ASSEMBLY__
-
-# ifdef __KERNEL__
extern void do_notify_resume(struct pt_regs *, void *, __u32);
-# endif /* __KERNEL__ */
-
#ifdef __i386__
-# ifdef __KERNEL__
struct old_sigaction {
__sighandler_t sa_handler;
old_sigset_t sa_mask;
struct sigaction sa;
};
-# else /* __KERNEL__ */
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-# endif /* ! __KERNEL__ */
#else /* __i386__ */
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- __sigrestore_t sa_restorer;
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-
#endif /* !__i386__ */
-
-typedef struct sigaltstack {
- void __user *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
#include <asm/sigcontext.h>
#ifdef __i386__
#endif /* !__i386__ */
-#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
-
#endif /* _ASM_X86_SIGNAL_H */
#ifndef __SVM_H
#define __SVM_H
-#define SVM_EXIT_READ_CR0 0x000
-#define SVM_EXIT_READ_CR3 0x003
-#define SVM_EXIT_READ_CR4 0x004
-#define SVM_EXIT_READ_CR8 0x008
-#define SVM_EXIT_WRITE_CR0 0x010
-#define SVM_EXIT_WRITE_CR3 0x013
-#define SVM_EXIT_WRITE_CR4 0x014
-#define SVM_EXIT_WRITE_CR8 0x018
-#define SVM_EXIT_READ_DR0 0x020
-#define SVM_EXIT_READ_DR1 0x021
-#define SVM_EXIT_READ_DR2 0x022
-#define SVM_EXIT_READ_DR3 0x023
-#define SVM_EXIT_READ_DR4 0x024
-#define SVM_EXIT_READ_DR5 0x025
-#define SVM_EXIT_READ_DR6 0x026
-#define SVM_EXIT_READ_DR7 0x027
-#define SVM_EXIT_WRITE_DR0 0x030
-#define SVM_EXIT_WRITE_DR1 0x031
-#define SVM_EXIT_WRITE_DR2 0x032
-#define SVM_EXIT_WRITE_DR3 0x033
-#define SVM_EXIT_WRITE_DR4 0x034
-#define SVM_EXIT_WRITE_DR5 0x035
-#define SVM_EXIT_WRITE_DR6 0x036
-#define SVM_EXIT_WRITE_DR7 0x037
-#define SVM_EXIT_EXCP_BASE 0x040
-#define SVM_EXIT_INTR 0x060
-#define SVM_EXIT_NMI 0x061
-#define SVM_EXIT_SMI 0x062
-#define SVM_EXIT_INIT 0x063
-#define SVM_EXIT_VINTR 0x064
-#define SVM_EXIT_CR0_SEL_WRITE 0x065
-#define SVM_EXIT_IDTR_READ 0x066
-#define SVM_EXIT_GDTR_READ 0x067
-#define SVM_EXIT_LDTR_READ 0x068
-#define SVM_EXIT_TR_READ 0x069
-#define SVM_EXIT_IDTR_WRITE 0x06a
-#define SVM_EXIT_GDTR_WRITE 0x06b
-#define SVM_EXIT_LDTR_WRITE 0x06c
-#define SVM_EXIT_TR_WRITE 0x06d
-#define SVM_EXIT_RDTSC 0x06e
-#define SVM_EXIT_RDPMC 0x06f
-#define SVM_EXIT_PUSHF 0x070
-#define SVM_EXIT_POPF 0x071
-#define SVM_EXIT_CPUID 0x072
-#define SVM_EXIT_RSM 0x073
-#define SVM_EXIT_IRET 0x074
-#define SVM_EXIT_SWINT 0x075
-#define SVM_EXIT_INVD 0x076
-#define SVM_EXIT_PAUSE 0x077
-#define SVM_EXIT_HLT 0x078
-#define SVM_EXIT_INVLPG 0x079
-#define SVM_EXIT_INVLPGA 0x07a
-#define SVM_EXIT_IOIO 0x07b
-#define SVM_EXIT_MSR 0x07c
-#define SVM_EXIT_TASK_SWITCH 0x07d
-#define SVM_EXIT_FERR_FREEZE 0x07e
-#define SVM_EXIT_SHUTDOWN 0x07f
-#define SVM_EXIT_VMRUN 0x080
-#define SVM_EXIT_VMMCALL 0x081
-#define SVM_EXIT_VMLOAD 0x082
-#define SVM_EXIT_VMSAVE 0x083
-#define SVM_EXIT_STGI 0x084
-#define SVM_EXIT_CLGI 0x085
-#define SVM_EXIT_SKINIT 0x086
-#define SVM_EXIT_RDTSCP 0x087
-#define SVM_EXIT_ICEBP 0x088
-#define SVM_EXIT_WBINVD 0x089
-#define SVM_EXIT_MONITOR 0x08a
-#define SVM_EXIT_MWAIT 0x08b
-#define SVM_EXIT_MWAIT_COND 0x08c
-#define SVM_EXIT_XSETBV 0x08d
-#define SVM_EXIT_NPF 0x400
-
-#define SVM_EXIT_ERR -1
-
-#define SVM_EXIT_REASONS \
- { SVM_EXIT_READ_CR0, "read_cr0" }, \
- { SVM_EXIT_READ_CR3, "read_cr3" }, \
- { SVM_EXIT_READ_CR4, "read_cr4" }, \
- { SVM_EXIT_READ_CR8, "read_cr8" }, \
- { SVM_EXIT_WRITE_CR0, "write_cr0" }, \
- { SVM_EXIT_WRITE_CR3, "write_cr3" }, \
- { SVM_EXIT_WRITE_CR4, "write_cr4" }, \
- { SVM_EXIT_WRITE_CR8, "write_cr8" }, \
- { SVM_EXIT_READ_DR0, "read_dr0" }, \
- { SVM_EXIT_READ_DR1, "read_dr1" }, \
- { SVM_EXIT_READ_DR2, "read_dr2" }, \
- { SVM_EXIT_READ_DR3, "read_dr3" }, \
- { SVM_EXIT_WRITE_DR0, "write_dr0" }, \
- { SVM_EXIT_WRITE_DR1, "write_dr1" }, \
- { SVM_EXIT_WRITE_DR2, "write_dr2" }, \
- { SVM_EXIT_WRITE_DR3, "write_dr3" }, \
- { SVM_EXIT_WRITE_DR5, "write_dr5" }, \
- { SVM_EXIT_WRITE_DR7, "write_dr7" }, \
- { SVM_EXIT_EXCP_BASE + DB_VECTOR, "DB excp" }, \
- { SVM_EXIT_EXCP_BASE + BP_VECTOR, "BP excp" }, \
- { SVM_EXIT_EXCP_BASE + UD_VECTOR, "UD excp" }, \
- { SVM_EXIT_EXCP_BASE + PF_VECTOR, "PF excp" }, \
- { SVM_EXIT_EXCP_BASE + NM_VECTOR, "NM excp" }, \
- { SVM_EXIT_EXCP_BASE + MC_VECTOR, "MC excp" }, \
- { SVM_EXIT_INTR, "interrupt" }, \
- { SVM_EXIT_NMI, "nmi" }, \
- { SVM_EXIT_SMI, "smi" }, \
- { SVM_EXIT_INIT, "init" }, \
- { SVM_EXIT_VINTR, "vintr" }, \
- { SVM_EXIT_CPUID, "cpuid" }, \
- { SVM_EXIT_INVD, "invd" }, \
- { SVM_EXIT_HLT, "hlt" }, \
- { SVM_EXIT_INVLPG, "invlpg" }, \
- { SVM_EXIT_INVLPGA, "invlpga" }, \
- { SVM_EXIT_IOIO, "io" }, \
- { SVM_EXIT_MSR, "msr" }, \
- { SVM_EXIT_TASK_SWITCH, "task_switch" }, \
- { SVM_EXIT_SHUTDOWN, "shutdown" }, \
- { SVM_EXIT_VMRUN, "vmrun" }, \
- { SVM_EXIT_VMMCALL, "hypercall" }, \
- { SVM_EXIT_VMLOAD, "vmload" }, \
- { SVM_EXIT_VMSAVE, "vmsave" }, \
- { SVM_EXIT_STGI, "stgi" }, \
- { SVM_EXIT_CLGI, "clgi" }, \
- { SVM_EXIT_SKINIT, "skinit" }, \
- { SVM_EXIT_WBINVD, "wbinvd" }, \
- { SVM_EXIT_MONITOR, "monitor" }, \
- { SVM_EXIT_MWAIT, "mwait" }, \
- { SVM_EXIT_XSETBV, "xsetbv" }, \
- { SVM_EXIT_NPF, "npf" }
-
-#ifdef __KERNEL__
+#include <uapi/asm/svm.h>
+
enum {
INTERCEPT_INTR,
#define SVM_INVLPGA ".byte 0x0f, 0x01, 0xdf"
#endif
-
-#endif
#ifndef _ASM_X86_UNISTD_H
#define _ASM_X86_UNISTD_H 1
-/* x32 syscall flag bit */
-#define __X32_SYSCALL_BIT 0x40000000
+#include <uapi/asm/unistd.h>
-#ifdef __KERNEL__
# ifdef CONFIG_X86_X32_ABI
# define __SYSCALL_MASK (~(__X32_SYSCALL_BIT))
*/
# define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-#else
-# ifdef __i386__
-# include <asm/unistd_32.h>
-# elif defined(__ILP32__)
-# include <asm/unistd_x32.h>
-# else
-# include <asm/unistd_64.h>
-# endif
-#endif
-
#endif /* _ASM_X86_UNISTD_H */
#ifndef _ASM_X86_VM86_H
#define _ASM_X86_VM86_H
-/*
- * I'm guessing at the VIF/VIP flag usage, but hope that this is how
- * the Pentium uses them. Linux will return from vm86 mode when both
- * VIF and VIP is set.
- *
- * On a Pentium, we could probably optimize the virtual flags directly
- * in the eflags register instead of doing it "by hand" in vflags...
- *
- * Linus
- */
-
-#include <asm/processor-flags.h>
-
-#define BIOSSEG 0x0f000
-
-#define CPU_086 0
-#define CPU_186 1
-#define CPU_286 2
-#define CPU_386 3
-#define CPU_486 4
-#define CPU_586 5
-
-/*
- * Return values for the 'vm86()' system call
- */
-#define VM86_TYPE(retval) ((retval) & 0xff)
-#define VM86_ARG(retval) ((retval) >> 8)
-
-#define VM86_SIGNAL 0 /* return due to signal */
-#define VM86_UNKNOWN 1 /* unhandled GP fault
- - IO-instruction or similar */
-#define VM86_INTx 2 /* int3/int x instruction (ARG = x) */
-#define VM86_STI 3 /* sti/popf/iret instruction enabled
- virtual interrupts */
-
-/*
- * Additional return values when invoking new vm86()
- */
-#define VM86_PICRETURN 4 /* return due to pending PIC request */
-#define VM86_TRAP 6 /* return due to DOS-debugger request */
-
-/*
- * function codes when invoking new vm86()
- */
-#define VM86_PLUS_INSTALL_CHECK 0
-#define VM86_ENTER 1
-#define VM86_ENTER_NO_BYPASS 2
-#define VM86_REQUEST_IRQ 3
-#define VM86_FREE_IRQ 4
-#define VM86_GET_IRQ_BITS 5
-#define VM86_GET_AND_RESET_IRQ 6
-
-/*
- * This is the stack-layout seen by the user space program when we have
- * done a translation of "SAVE_ALL" from vm86 mode. The real kernel layout
- * is 'kernel_vm86_regs' (see below).
- */
-
-struct vm86_regs {
-/*
- * normal regs, with special meaning for the segment descriptors..
- */
- long ebx;
- long ecx;
- long edx;
- long esi;
- long edi;
- long ebp;
- long eax;
- long __null_ds;
- long __null_es;
- long __null_fs;
- long __null_gs;
- long orig_eax;
- long eip;
- unsigned short cs, __csh;
- long eflags;
- long esp;
- unsigned short ss, __ssh;
-/*
- * these are specific to v86 mode:
- */
- unsigned short es, __esh;
- unsigned short ds, __dsh;
- unsigned short fs, __fsh;
- unsigned short gs, __gsh;
-};
-
-struct revectored_struct {
- unsigned long __map[8]; /* 256 bits */
-};
-
-struct vm86_struct {
- struct vm86_regs regs;
- unsigned long flags;
- unsigned long screen_bitmap;
- unsigned long cpu_type;
- struct revectored_struct int_revectored;
- struct revectored_struct int21_revectored;
-};
-
-/*
- * flags masks
- */
-#define VM86_SCREEN_BITMAP 0x0001
-
-struct vm86plus_info_struct {
- unsigned long force_return_for_pic:1;
- unsigned long vm86dbg_active:1; /* for debugger */
- unsigned long vm86dbg_TFpendig:1; /* for debugger */
- unsigned long unused:28;
- unsigned long is_vm86pus:1; /* for vm86 internal use */
- unsigned char vm86dbg_intxxtab[32]; /* for debugger */
-};
-struct vm86plus_struct {
- struct vm86_regs regs;
- unsigned long flags;
- unsigned long screen_bitmap;
- unsigned long cpu_type;
- struct revectored_struct int_revectored;
- struct revectored_struct int21_revectored;
- struct vm86plus_info_struct vm86plus;
-};
-
-#ifdef __KERNEL__
#include <asm/ptrace.h>
+#include <uapi/asm/vm86.h>
/*
* This is the (kernel) stack-layout when we have done a "SAVE_ALL" from vm86
#endif /* CONFIG_VM86 */
-#endif /* __KERNEL__ */
-
#endif /* _ASM_X86_VM86_H */
-#ifndef VMX_H
-#define VMX_H
-
/*
* vmx.h: VMX Architecture related definitions
* Copyright (c) 2004, Intel Corporation.
* Yaniv Kamay <yaniv@qumranet.com>
*
*/
+#ifndef VMX_H
+#define VMX_H
-#define VMX_EXIT_REASONS_FAILED_VMENTRY 0x80000000
-
-#define EXIT_REASON_EXCEPTION_NMI 0
-#define EXIT_REASON_EXTERNAL_INTERRUPT 1
-#define EXIT_REASON_TRIPLE_FAULT 2
-
-#define EXIT_REASON_PENDING_INTERRUPT 7
-#define EXIT_REASON_NMI_WINDOW 8
-#define EXIT_REASON_TASK_SWITCH 9
-#define EXIT_REASON_CPUID 10
-#define EXIT_REASON_HLT 12
-#define EXIT_REASON_INVD 13
-#define EXIT_REASON_INVLPG 14
-#define EXIT_REASON_RDPMC 15
-#define EXIT_REASON_RDTSC 16
-#define EXIT_REASON_VMCALL 18
-#define EXIT_REASON_VMCLEAR 19
-#define EXIT_REASON_VMLAUNCH 20
-#define EXIT_REASON_VMPTRLD 21
-#define EXIT_REASON_VMPTRST 22
-#define EXIT_REASON_VMREAD 23
-#define EXIT_REASON_VMRESUME 24
-#define EXIT_REASON_VMWRITE 25
-#define EXIT_REASON_VMOFF 26
-#define EXIT_REASON_VMON 27
-#define EXIT_REASON_CR_ACCESS 28
-#define EXIT_REASON_DR_ACCESS 29
-#define EXIT_REASON_IO_INSTRUCTION 30
-#define EXIT_REASON_MSR_READ 31
-#define EXIT_REASON_MSR_WRITE 32
-#define EXIT_REASON_INVALID_STATE 33
-#define EXIT_REASON_MWAIT_INSTRUCTION 36
-#define EXIT_REASON_MONITOR_INSTRUCTION 39
-#define EXIT_REASON_PAUSE_INSTRUCTION 40
-#define EXIT_REASON_MCE_DURING_VMENTRY 41
-#define EXIT_REASON_TPR_BELOW_THRESHOLD 43
-#define EXIT_REASON_APIC_ACCESS 44
-#define EXIT_REASON_EPT_VIOLATION 48
-#define EXIT_REASON_EPT_MISCONFIG 49
-#define EXIT_REASON_WBINVD 54
-#define EXIT_REASON_XSETBV 55
-#define EXIT_REASON_INVPCID 58
-
-#define VMX_EXIT_REASONS \
- { EXIT_REASON_EXCEPTION_NMI, "EXCEPTION_NMI" }, \
- { EXIT_REASON_EXTERNAL_INTERRUPT, "EXTERNAL_INTERRUPT" }, \
- { EXIT_REASON_TRIPLE_FAULT, "TRIPLE_FAULT" }, \
- { EXIT_REASON_PENDING_INTERRUPT, "PENDING_INTERRUPT" }, \
- { EXIT_REASON_NMI_WINDOW, "NMI_WINDOW" }, \
- { EXIT_REASON_TASK_SWITCH, "TASK_SWITCH" }, \
- { EXIT_REASON_CPUID, "CPUID" }, \
- { EXIT_REASON_HLT, "HLT" }, \
- { EXIT_REASON_INVLPG, "INVLPG" }, \
- { EXIT_REASON_RDPMC, "RDPMC" }, \
- { EXIT_REASON_RDTSC, "RDTSC" }, \
- { EXIT_REASON_VMCALL, "VMCALL" }, \
- { EXIT_REASON_VMCLEAR, "VMCLEAR" }, \
- { EXIT_REASON_VMLAUNCH, "VMLAUNCH" }, \
- { EXIT_REASON_VMPTRLD, "VMPTRLD" }, \
- { EXIT_REASON_VMPTRST, "VMPTRST" }, \
- { EXIT_REASON_VMREAD, "VMREAD" }, \
- { EXIT_REASON_VMRESUME, "VMRESUME" }, \
- { EXIT_REASON_VMWRITE, "VMWRITE" }, \
- { EXIT_REASON_VMOFF, "VMOFF" }, \
- { EXIT_REASON_VMON, "VMON" }, \
- { EXIT_REASON_CR_ACCESS, "CR_ACCESS" }, \
- { EXIT_REASON_DR_ACCESS, "DR_ACCESS" }, \
- { EXIT_REASON_IO_INSTRUCTION, "IO_INSTRUCTION" }, \
- { EXIT_REASON_MSR_READ, "MSR_READ" }, \
- { EXIT_REASON_MSR_WRITE, "MSR_WRITE" }, \
- { EXIT_REASON_MWAIT_INSTRUCTION, "MWAIT_INSTRUCTION" }, \
- { EXIT_REASON_MONITOR_INSTRUCTION, "MONITOR_INSTRUCTION" }, \
- { EXIT_REASON_PAUSE_INSTRUCTION, "PAUSE_INSTRUCTION" }, \
- { EXIT_REASON_MCE_DURING_VMENTRY, "MCE_DURING_VMENTRY" }, \
- { EXIT_REASON_TPR_BELOW_THRESHOLD, "TPR_BELOW_THRESHOLD" }, \
- { EXIT_REASON_APIC_ACCESS, "APIC_ACCESS" }, \
- { EXIT_REASON_EPT_VIOLATION, "EPT_VIOLATION" }, \
- { EXIT_REASON_EPT_MISCONFIG, "EPT_MISCONFIG" }, \
- { EXIT_REASON_WBINVD, "WBINVD" }
-
-#ifdef __KERNEL__
#include <linux/types.h>
+#include <uapi/asm/vmx.h>
/*
* Definitions of Primary Processor-Based VM-Execution Controls.
};
#endif
-
-#endif
#ifndef _ASM_X86_VSYSCALL_H
#define _ASM_X86_VSYSCALL_H
-enum vsyscall_num {
- __NR_vgettimeofday,
- __NR_vtime,
- __NR_vgetcpu,
-};
-
-#define VSYSCALL_START (-10UL << 20)
-#define VSYSCALL_SIZE 1024
-#define VSYSCALL_END (-2UL << 20)
-#define VSYSCALL_MAPPED_PAGES 1
-#define VSYSCALL_ADDR(vsyscall_nr) (VSYSCALL_START+VSYSCALL_SIZE*(vsyscall_nr))
-
-#ifdef __KERNEL__
#include <linux/seqlock.h>
+#include <uapi/asm/vsyscall.h>
#define VGETCPU_RDTSCP 1
#define VGETCPU_LSL 2
}
#endif /* CONFIG_X86_64 */
-#endif /* __KERNEL__ */
-
#endif /* _ASM_X86_VSYSCALL_H */
genhdr-y += unistd_32.h
genhdr-y += unistd_64.h
genhdr-y += unistd_x32.h
+header-y += a.out.h
+header-y += auxvec.h
+header-y += bitsperlong.h
+header-y += boot.h
+header-y += bootparam.h
+header-y += byteorder.h
+header-y += debugreg.h
+header-y += e820.h
+header-y += errno.h
+header-y += fcntl.h
+header-y += hw_breakpoint.h
+header-y += hyperv.h
+header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += ist.h
+header-y += kvm.h
+header-y += kvm_para.h
+header-y += ldt.h
+header-y += mce.h
+header-y += mman.h
+header-y += msgbuf.h
+header-y += msr-index.h
+header-y += msr.h
+header-y += mtrr.h
+header-y += param.h
+header-y += perf_regs.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += posix_types_32.h
+header-y += posix_types_64.h
+header-y += posix_types_x32.h
+header-y += prctl.h
+header-y += processor-flags.h
+header-y += ptrace-abi.h
+header-y += ptrace.h
+header-y += resource.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += sigcontext.h
+header-y += sigcontext32.h
+header-y += siginfo.h
+header-y += signal.h
+header-y += socket.h
+header-y += sockios.h
+header-y += stat.h
+header-y += statfs.h
+header-y += svm.h
+header-y += swab.h
+header-y += termbits.h
+header-y += termios.h
+header-y += types.h
+header-y += ucontext.h
+header-y += unistd.h
+header-y += vm86.h
+header-y += vmx.h
+header-y += vsyscall.h
--- /dev/null
+#ifndef _UAPI_ASM_X86_BOOT_H
+#define _UAPI_ASM_X86_BOOT_H
+
+/* Internal svga startup constants */
+#define NORMAL_VGA 0xffff /* 80x25 mode */
+#define EXTENDED_VGA 0xfffe /* 80x50 mode */
+#define ASK_VGA 0xfffd /* ask for it at bootup */
+
+
+#endif /* _UAPI_ASM_X86_BOOT_H */
--- /dev/null
+#ifndef _UAPI_ASM_X86_DEBUGREG_H
+#define _UAPI_ASM_X86_DEBUGREG_H
+
+
+/* Indicate the register numbers for a number of the specific
+ debug registers. Registers 0-3 contain the addresses we wish to trap on */
+#define DR_FIRSTADDR 0 /* u_debugreg[DR_FIRSTADDR] */
+#define DR_LASTADDR 3 /* u_debugreg[DR_LASTADDR] */
+
+#define DR_STATUS 6 /* u_debugreg[DR_STATUS] */
+#define DR_CONTROL 7 /* u_debugreg[DR_CONTROL] */
+
+/* Define a few things for the status register. We can use this to determine
+ which debugging register was responsible for the trap. The other bits
+ are either reserved or not of interest to us. */
+
+/* Define reserved bits in DR6 which are always set to 1 */
+#define DR6_RESERVED (0xFFFF0FF0)
+
+#define DR_TRAP0 (0x1) /* db0 */
+#define DR_TRAP1 (0x2) /* db1 */
+#define DR_TRAP2 (0x4) /* db2 */
+#define DR_TRAP3 (0x8) /* db3 */
+#define DR_TRAP_BITS (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)
+
+#define DR_STEP (0x4000) /* single-step */
+#define DR_SWITCH (0x8000) /* task switch */
+
+/* Now define a bunch of things for manipulating the control register.
+ The top two bytes of the control register consist of 4 fields of 4
+ bits - each field corresponds to one of the four debug registers,
+ and indicates what types of access we trap on, and how large the data
+ field is that we are looking at */
+
+#define DR_CONTROL_SHIFT 16 /* Skip this many bits in ctl register */
+#define DR_CONTROL_SIZE 4 /* 4 control bits per register */
+
+#define DR_RW_EXECUTE (0x0) /* Settings for the access types to trap on */
+#define DR_RW_WRITE (0x1)
+#define DR_RW_READ (0x3)
+
+#define DR_LEN_1 (0x0) /* Settings for data length to trap on */
+#define DR_LEN_2 (0x4)
+#define DR_LEN_4 (0xC)
+#define DR_LEN_8 (0x8)
+
+/* The low byte to the control register determine which registers are
+ enabled. There are 4 fields of two bits. One bit is "local", meaning
+ that the processor will reset the bit after a task switch and the other
+ is global meaning that we have to explicitly reset the bit. With linux,
+ you can use either one, since we explicitly zero the register when we enter
+ kernel mode. */
+
+#define DR_LOCAL_ENABLE_SHIFT 0 /* Extra shift to the local enable bit */
+#define DR_GLOBAL_ENABLE_SHIFT 1 /* Extra shift to the global enable bit */
+#define DR_LOCAL_ENABLE (0x1) /* Local enable for reg 0 */
+#define DR_GLOBAL_ENABLE (0x2) /* Global enable for reg 0 */
+#define DR_ENABLE_SIZE 2 /* 2 enable bits per register */
+
+#define DR_LOCAL_ENABLE_MASK (0x55) /* Set local bits for all 4 regs */
+#define DR_GLOBAL_ENABLE_MASK (0xAA) /* Set global bits for all 4 regs */
+
+/* The second byte to the control register has a few special things.
+ We can slow the instruction pipeline for instructions coming via the
+ gdt or the ldt if we want to. I am not sure why this is an advantage */
+
+#ifdef __i386__
+#define DR_CONTROL_RESERVED (0xFC00) /* Reserved by Intel */
+#else
+#define DR_CONTROL_RESERVED (0xFFFFFFFF0000FC00UL) /* Reserved */
+#endif
+
+#define DR_LOCAL_SLOWDOWN (0x100) /* Local slow the pipeline */
+#define DR_GLOBAL_SLOWDOWN (0x200) /* Global slow the pipeline */
+
+/*
+ * HW breakpoint additions
+ */
+
+#endif /* _UAPI_ASM_X86_DEBUGREG_H */
--- /dev/null
+#ifndef _UAPI_ASM_X86_E820_H
+#define _UAPI_ASM_X86_E820_H
+#define E820MAP 0x2d0 /* our map */
+#define E820MAX 128 /* number of entries in E820MAP */
+
+/*
+ * Legacy E820 BIOS limits us to 128 (E820MAX) nodes due to the
+ * constrained space in the zeropage. If we have more nodes than
+ * that, and if we've booted off EFI firmware, then the EFI tables
+ * passed us from the EFI firmware can list more nodes. Size our
+ * internal memory map tables to have room for these additional
+ * nodes, based on up to three entries per node for which the
+ * kernel was built: MAX_NUMNODES == (1 << CONFIG_NODES_SHIFT),
+ * plus E820MAX, allowing space for the possible duplicate E820
+ * entries that might need room in the same arrays, prior to the
+ * call to sanitize_e820_map() to remove duplicates. The allowance
+ * of three memory map entries per node is "enough" entries for
+ * the initial hardware platform motivating this mechanism to make
+ * use of additional EFI map entries. Future platforms may want
+ * to allow more than three entries per node or otherwise refine
+ * this size.
+ */
+
+/*
+ * Odd: 'make headers_check' complains about numa.h if I try
+ * to collapse the next two #ifdef lines to a single line:
+ * #if defined(__KERNEL__) && defined(CONFIG_EFI)
+ */
+#ifndef __KERNEL__
+#define E820_X_MAX E820MAX
+#endif
+
+#define E820NR 0x1e8 /* # entries in E820MAP */
+
+#define E820_RAM 1
+#define E820_RESERVED 2
+#define E820_ACPI 3
+#define E820_NVS 4
+#define E820_UNUSABLE 5
+
+
+/*
+ * reserved RAM used by kernel itself
+ * if CONFIG_INTEL_TXT is enabled, memory of this type will be
+ * included in the S3 integrity calculation and so should not include
+ * any memory that BIOS might alter over the S3 transition
+ */
+#define E820_RESERVED_KERN 128
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+struct e820entry {
+ __u64 addr; /* start of memory segment */
+ __u64 size; /* size of memory segment */
+ __u32 type; /* type of memory segment */
+} __attribute__((packed));
+
+struct e820map {
+ __u32 nr_map;
+ struct e820entry map[E820_X_MAX];
+};
+
+#define ISA_START_ADDRESS 0xa0000
+#define ISA_END_ADDRESS 0x100000
+
+#define BIOS_BEGIN 0x000a0000
+#define BIOS_END 0x00100000
+
+#define BIOS_ROM_BASE 0xffe00000
+#define BIOS_ROM_END 0xffffffff
+
+#endif /* __ASSEMBLY__ */
+
+
+#endif /* _UAPI_ASM_X86_E820_H */
--- /dev/null
+/*
+ * Include file for the interface to IST BIOS
+ * Copyright 2002 Andy Grover <andrew.grover@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef _UAPI_ASM_X86_IST_H
+#define _UAPI_ASM_X86_IST_H
+
+
+
+#include <linux/types.h>
+
+struct ist_info {
+ __u32 signature;
+ __u32 command;
+ __u32 event;
+ __u32 perf_level;
+};
+
+#endif /* _UAPI_ASM_X86_IST_H */
--- /dev/null
+#ifndef _UAPI_ASM_X86_KVM_PARA_H
+#define _UAPI_ASM_X86_KVM_PARA_H
+
+#include <linux/types.h>
+#include <asm/hyperv.h>
+
+/* This CPUID returns the signature 'KVMKVMKVM' in ebx, ecx, and edx. It
+ * should be used to determine that a VM is running under KVM.
+ */
+#define KVM_CPUID_SIGNATURE 0x40000000
+
+/* This CPUID returns a feature bitmap in eax. Before enabling a particular
+ * paravirtualization, the appropriate feature bit should be checked.
+ */
+#define KVM_CPUID_FEATURES 0x40000001
+#define KVM_FEATURE_CLOCKSOURCE 0
+#define KVM_FEATURE_NOP_IO_DELAY 1
+#define KVM_FEATURE_MMU_OP 2
+/* This indicates that the new set of kvmclock msrs
+ * are available. The use of 0x11 and 0x12 is deprecated
+ */
+#define KVM_FEATURE_CLOCKSOURCE2 3
+#define KVM_FEATURE_ASYNC_PF 4
+#define KVM_FEATURE_STEAL_TIME 5
+#define KVM_FEATURE_PV_EOI 6
+
+/* The last 8 bits are used to indicate how to interpret the flags field
+ * in pvclock structure. If no bits are set, all flags are ignored.
+ */
+#define KVM_FEATURE_CLOCKSOURCE_STABLE_BIT 24
+
+#define MSR_KVM_WALL_CLOCK 0x11
+#define MSR_KVM_SYSTEM_TIME 0x12
+
+#define KVM_MSR_ENABLED 1
+/* Custom MSRs falls in the range 0x4b564d00-0x4b564dff */
+#define MSR_KVM_WALL_CLOCK_NEW 0x4b564d00
+#define MSR_KVM_SYSTEM_TIME_NEW 0x4b564d01
+#define MSR_KVM_ASYNC_PF_EN 0x4b564d02
+#define MSR_KVM_STEAL_TIME 0x4b564d03
+#define MSR_KVM_PV_EOI_EN 0x4b564d04
+
+struct kvm_steal_time {
+ __u64 steal;
+ __u32 version;
+ __u32 flags;
+ __u32 pad[12];
+};
+
+#define KVM_STEAL_ALIGNMENT_BITS 5
+#define KVM_STEAL_VALID_BITS ((-1ULL << (KVM_STEAL_ALIGNMENT_BITS + 1)))
+#define KVM_STEAL_RESERVED_MASK (((1 << KVM_STEAL_ALIGNMENT_BITS) - 1 ) << 1)
+
+#define KVM_MAX_MMU_OP_BATCH 32
+
+#define KVM_ASYNC_PF_ENABLED (1 << 0)
+#define KVM_ASYNC_PF_SEND_ALWAYS (1 << 1)
+
+/* Operations for KVM_HC_MMU_OP */
+#define KVM_MMU_OP_WRITE_PTE 1
+#define KVM_MMU_OP_FLUSH_TLB 2
+#define KVM_MMU_OP_RELEASE_PT 3
+
+/* Payload for KVM_HC_MMU_OP */
+struct kvm_mmu_op_header {
+ __u32 op;
+ __u32 pad;
+};
+
+struct kvm_mmu_op_write_pte {
+ struct kvm_mmu_op_header header;
+ __u64 pte_phys;
+ __u64 pte_val;
+};
+
+struct kvm_mmu_op_flush_tlb {
+ struct kvm_mmu_op_header header;
+};
+
+struct kvm_mmu_op_release_pt {
+ struct kvm_mmu_op_header header;
+ __u64 pt_phys;
+};
+
+#define KVM_PV_REASON_PAGE_NOT_PRESENT 1
+#define KVM_PV_REASON_PAGE_READY 2
+
+struct kvm_vcpu_pv_apf_data {
+ __u32 reason;
+ __u8 pad[60];
+ __u32 enabled;
+};
+
+#define KVM_PV_EOI_BIT 0
+#define KVM_PV_EOI_MASK (0x1 << KVM_PV_EOI_BIT)
+#define KVM_PV_EOI_ENABLED KVM_PV_EOI_MASK
+#define KVM_PV_EOI_DISABLED 0x0
+
+
+#endif /* _UAPI_ASM_X86_KVM_PARA_H */
--- /dev/null
+#ifndef _UAPI_ASM_X86_MCE_H
+#define _UAPI_ASM_X86_MCE_H
+
+#include <linux/types.h>
+#include <asm/ioctls.h>
+
+/*
+ * Machine Check support for x86
+ */
+
+/* MCG_CAP register defines */
+#define MCG_BANKCNT_MASK 0xff /* Number of Banks */
+#define MCG_CTL_P (1ULL<<8) /* MCG_CTL register available */
+#define MCG_EXT_P (1ULL<<9) /* Extended registers available */
+#define MCG_CMCI_P (1ULL<<10) /* CMCI supported */
+#define MCG_EXT_CNT_MASK 0xff0000 /* Number of Extended registers */
+#define MCG_EXT_CNT_SHIFT 16
+#define MCG_EXT_CNT(c) (((c) & MCG_EXT_CNT_MASK) >> MCG_EXT_CNT_SHIFT)
+#define MCG_SER_P (1ULL<<24) /* MCA recovery/new status bits */
+
+/* MCG_STATUS register defines */
+#define MCG_STATUS_RIPV (1ULL<<0) /* restart ip valid */
+#define MCG_STATUS_EIPV (1ULL<<1) /* ip points to correct instruction */
+#define MCG_STATUS_MCIP (1ULL<<2) /* machine check in progress */
+
+/* MCi_STATUS register defines */
+#define MCI_STATUS_VAL (1ULL<<63) /* valid error */
+#define MCI_STATUS_OVER (1ULL<<62) /* previous errors lost */
+#define MCI_STATUS_UC (1ULL<<61) /* uncorrected error */
+#define MCI_STATUS_EN (1ULL<<60) /* error enabled */
+#define MCI_STATUS_MISCV (1ULL<<59) /* misc error reg. valid */
+#define MCI_STATUS_ADDRV (1ULL<<58) /* addr reg. valid */
+#define MCI_STATUS_PCC (1ULL<<57) /* processor context corrupt */
+#define MCI_STATUS_S (1ULL<<56) /* Signaled machine check */
+#define MCI_STATUS_AR (1ULL<<55) /* Action required */
+#define MCACOD 0xffff /* MCA Error Code */
+
+/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */
+#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */
+#define MCACOD_SCRUBMSK 0xfff0
+#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */
+#define MCACOD_DATA 0x0134 /* Data Load */
+#define MCACOD_INSTR 0x0150 /* Instruction Fetch */
+
+/* MCi_MISC register defines */
+#define MCI_MISC_ADDR_LSB(m) ((m) & 0x3f)
+#define MCI_MISC_ADDR_MODE(m) (((m) >> 6) & 7)
+#define MCI_MISC_ADDR_SEGOFF 0 /* segment offset */
+#define MCI_MISC_ADDR_LINEAR 1 /* linear address */
+#define MCI_MISC_ADDR_PHYS 2 /* physical address */
+#define MCI_MISC_ADDR_MEM 3 /* memory address */
+#define MCI_MISC_ADDR_GENERIC 7 /* generic */
+
+/* CTL2 register defines */
+#define MCI_CTL2_CMCI_EN (1ULL << 30)
+#define MCI_CTL2_CMCI_THRESHOLD_MASK 0x7fffULL
+
+#define MCJ_CTX_MASK 3
+#define MCJ_CTX(flags) ((flags) & MCJ_CTX_MASK)
+#define MCJ_CTX_RANDOM 0 /* inject context: random */
+#define MCJ_CTX_PROCESS 0x1 /* inject context: process */
+#define MCJ_CTX_IRQ 0x2 /* inject context: IRQ */
+#define MCJ_NMI_BROADCAST 0x4 /* do NMI broadcasting */
+#define MCJ_EXCEPTION 0x8 /* raise as exception */
+#define MCJ_IRQ_BRAODCAST 0x10 /* do IRQ broadcasting */
+
+/* Fields are zero when not available */
+struct mce {
+ __u64 status;
+ __u64 misc;
+ __u64 addr;
+ __u64 mcgstatus;
+ __u64 ip;
+ __u64 tsc; /* cpu time stamp counter */
+ __u64 time; /* wall time_t when error was detected */
+ __u8 cpuvendor; /* cpu vendor as encoded in system.h */
+ __u8 inject_flags; /* software inject flags */
+ __u16 pad;
+ __u32 cpuid; /* CPUID 1 EAX */
+ __u8 cs; /* code segment */
+ __u8 bank; /* machine check bank */
+ __u8 cpu; /* cpu number; obsolete; use extcpu now */
+ __u8 finished; /* entry is valid */
+ __u32 extcpu; /* linux cpu number that detected the error */
+ __u32 socketid; /* CPU socket ID */
+ __u32 apicid; /* CPU initial apic ID */
+ __u64 mcgcap; /* MCGCAP MSR: machine check capabilities of CPU */
+};
+
+/*
+ * This structure contains all data related to the MCE log. Also
+ * carries a signature to make it easier to find from external
+ * debugging tools. Each entry is only valid when its finished flag
+ * is set.
+ */
+
+#define MCE_LOG_LEN 32
+
+struct mce_log {
+ char signature[12]; /* "MACHINECHECK" */
+ unsigned len; /* = MCE_LOG_LEN */
+ unsigned next;
+ unsigned flags;
+ unsigned recordlen; /* length of struct mce */
+ struct mce entry[MCE_LOG_LEN];
+};
+
+#define MCE_OVERFLOW 0 /* bit 0 in flags means overflow */
+
+#define MCE_LOG_SIGNATURE "MACHINECHECK"
+
+#define MCE_GET_RECORD_LEN _IOR('M', 1, int)
+#define MCE_GET_LOG_LEN _IOR('M', 2, int)
+#define MCE_GETCLEAR_FLAGS _IOR('M', 3, int)
+
+/* Software defined banks */
+#define MCE_EXTENDED_BANK 128
+#define MCE_THERMAL_BANK MCE_EXTENDED_BANK + 0
+#define K8_MCE_THRESHOLD_BASE (MCE_EXTENDED_BANK + 1)
+
+#endif /* _UAPI_ASM_X86_MCE_H */
--- /dev/null
+#ifndef _UAPI_ASM_X86_MSR_H
+#define _UAPI_ASM_X86_MSR_H
+
+#include <asm/msr-index.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define X86_IOC_RDMSR_REGS _IOWR('c', 0xA0, __u32[8])
+#define X86_IOC_WRMSR_REGS _IOWR('c', 0xA1, __u32[8])
+
+#endif /* __ASSEMBLY__ */
+#endif /* _UAPI_ASM_X86_MSR_H */
--- /dev/null
+/* Generic MTRR (Memory Type Range Register) ioctls.
+
+ Copyright (C) 1997-1999 Richard Gooch
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Library General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this library; if not, write to the Free
+ Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ Richard Gooch may be reached by email at rgooch@atnf.csiro.au
+ The postal address is:
+ Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia.
+*/
+#ifndef _UAPI_ASM_X86_MTRR_H
+#define _UAPI_ASM_X86_MTRR_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <linux/errno.h>
+
+#define MTRR_IOCTL_BASE 'M'
+
+/* Warning: this structure has a different order from i386
+ on x86-64. The 32bit emulation code takes care of that.
+ But you need to use this for 64bit, otherwise your X server
+ will break. */
+
+#ifdef __i386__
+struct mtrr_sentry {
+ unsigned long base; /* Base address */
+ unsigned int size; /* Size of region */
+ unsigned int type; /* Type of region */
+};
+
+struct mtrr_gentry {
+ unsigned int regnum; /* Register number */
+ unsigned long base; /* Base address */
+ unsigned int size; /* Size of region */
+ unsigned int type; /* Type of region */
+};
+
+#else /* __i386__ */
+
+struct mtrr_sentry {
+ __u64 base; /* Base address */
+ __u32 size; /* Size of region */
+ __u32 type; /* Type of region */
+};
+
+struct mtrr_gentry {
+ __u64 base; /* Base address */
+ __u32 size; /* Size of region */
+ __u32 regnum; /* Register number */
+ __u32 type; /* Type of region */
+ __u32 _pad; /* Unused */
+};
+
+#endif /* !__i386__ */
+
+struct mtrr_var_range {
+ __u32 base_lo;
+ __u32 base_hi;
+ __u32 mask_lo;
+ __u32 mask_hi;
+};
+
+/* In the Intel processor's MTRR interface, the MTRR type is always held in
+ an 8 bit field: */
+typedef __u8 mtrr_type;
+
+#define MTRR_NUM_FIXED_RANGES 88
+#define MTRR_MAX_VAR_RANGES 256
+
+struct mtrr_state_type {
+ struct mtrr_var_range var_ranges[MTRR_MAX_VAR_RANGES];
+ mtrr_type fixed_ranges[MTRR_NUM_FIXED_RANGES];
+ unsigned char enabled;
+ unsigned char have_fixed;
+ mtrr_type def_type;
+};
+
+#define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg))
+#define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1)
+
+/* These are the various ioctls */
+#define MTRRIOC_ADD_ENTRY _IOW(MTRR_IOCTL_BASE, 0, struct mtrr_sentry)
+#define MTRRIOC_SET_ENTRY _IOW(MTRR_IOCTL_BASE, 1, struct mtrr_sentry)
+#define MTRRIOC_DEL_ENTRY _IOW(MTRR_IOCTL_BASE, 2, struct mtrr_sentry)
+#define MTRRIOC_GET_ENTRY _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry)
+#define MTRRIOC_KILL_ENTRY _IOW(MTRR_IOCTL_BASE, 4, struct mtrr_sentry)
+#define MTRRIOC_ADD_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 5, struct mtrr_sentry)
+#define MTRRIOC_SET_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 6, struct mtrr_sentry)
+#define MTRRIOC_DEL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 7, struct mtrr_sentry)
+#define MTRRIOC_GET_PAGE_ENTRY _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry)
+#define MTRRIOC_KILL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 9, struct mtrr_sentry)
+
+/* These are the region types */
+#define MTRR_TYPE_UNCACHABLE 0
+#define MTRR_TYPE_WRCOMB 1
+/*#define MTRR_TYPE_ 2*/
+/*#define MTRR_TYPE_ 3*/
+#define MTRR_TYPE_WRTHROUGH 4
+#define MTRR_TYPE_WRPROT 5
+#define MTRR_TYPE_WRBACK 6
+#define MTRR_NUM_TYPES 7
+
+
+#endif /* _UAPI_ASM_X86_MTRR_H */
--- /dev/null
+#ifndef __KERNEL__
+# ifdef __i386__
+# include <asm/posix_types_32.h>
+# elif defined(__ILP32__)
+# include <asm/posix_types_x32.h>
+# else
+# include <asm/posix_types_64.h>
+# endif
+#endif
--- /dev/null
+#ifndef _UAPI_ASM_X86_PROCESSOR_FLAGS_H
+#define _UAPI_ASM_X86_PROCESSOR_FLAGS_H
+/* Various flags defined: can be included from assembler. */
+
+/*
+ * EFLAGS bits
+ */
+#define X86_EFLAGS_CF 0x00000001 /* Carry Flag */
+#define X86_EFLAGS_BIT1 0x00000002 /* Bit 1 - always on */
+#define X86_EFLAGS_PF 0x00000004 /* Parity Flag */
+#define X86_EFLAGS_AF 0x00000010 /* Auxiliary carry Flag */
+#define X86_EFLAGS_ZF 0x00000040 /* Zero Flag */
+#define X86_EFLAGS_SF 0x00000080 /* Sign Flag */
+#define X86_EFLAGS_TF 0x00000100 /* Trap Flag */
+#define X86_EFLAGS_IF 0x00000200 /* Interrupt Flag */
+#define X86_EFLAGS_DF 0x00000400 /* Direction Flag */
+#define X86_EFLAGS_OF 0x00000800 /* Overflow Flag */
+#define X86_EFLAGS_IOPL 0x00003000 /* IOPL mask */
+#define X86_EFLAGS_NT 0x00004000 /* Nested Task */
+#define X86_EFLAGS_RF 0x00010000 /* Resume Flag */
+#define X86_EFLAGS_VM 0x00020000 /* Virtual Mode */
+#define X86_EFLAGS_AC 0x00040000 /* Alignment Check */
+#define X86_EFLAGS_VIF 0x00080000 /* Virtual Interrupt Flag */
+#define X86_EFLAGS_VIP 0x00100000 /* Virtual Interrupt Pending */
+#define X86_EFLAGS_ID 0x00200000 /* CPUID detection flag */
+
+/*
+ * Basic CPU control in CR0
+ */
+#define X86_CR0_PE 0x00000001 /* Protection Enable */
+#define X86_CR0_MP 0x00000002 /* Monitor Coprocessor */
+#define X86_CR0_EM 0x00000004 /* Emulation */
+#define X86_CR0_TS 0x00000008 /* Task Switched */
+#define X86_CR0_ET 0x00000010 /* Extension Type */
+#define X86_CR0_NE 0x00000020 /* Numeric Error */
+#define X86_CR0_WP 0x00010000 /* Write Protect */
+#define X86_CR0_AM 0x00040000 /* Alignment Mask */
+#define X86_CR0_NW 0x20000000 /* Not Write-through */
+#define X86_CR0_CD 0x40000000 /* Cache Disable */
+#define X86_CR0_PG 0x80000000 /* Paging */
+
+/*
+ * Paging options in CR3
+ */
+#define X86_CR3_PWT 0x00000008 /* Page Write Through */
+#define X86_CR3_PCD 0x00000010 /* Page Cache Disable */
+#define X86_CR3_PCID_MASK 0x00000fff /* PCID Mask */
+
+/*
+ * Intel CPU features in CR4
+ */
+#define X86_CR4_VME 0x00000001 /* enable vm86 extensions */
+#define X86_CR4_PVI 0x00000002 /* virtual interrupts flag enable */
+#define X86_CR4_TSD 0x00000004 /* disable time stamp at ipl 3 */
+#define X86_CR4_DE 0x00000008 /* enable debugging extensions */
+#define X86_CR4_PSE 0x00000010 /* enable page size extensions */
+#define X86_CR4_PAE 0x00000020 /* enable physical address extensions */
+#define X86_CR4_MCE 0x00000040 /* Machine check enable */
+#define X86_CR4_PGE 0x00000080 /* enable global pages */
+#define X86_CR4_PCE 0x00000100 /* enable performance counters at ipl 3 */
+#define X86_CR4_OSFXSR 0x00000200 /* enable fast FPU save and restore */
+#define X86_CR4_OSXMMEXCPT 0x00000400 /* enable unmasked SSE exceptions */
+#define X86_CR4_VMXE 0x00002000 /* enable VMX virtualization */
+#define X86_CR4_RDWRGSFS 0x00010000 /* enable RDWRGSFS support */
+#define X86_CR4_PCIDE 0x00020000 /* enable PCID support */
+#define X86_CR4_OSXSAVE 0x00040000 /* enable xsave and xrestore */
+#define X86_CR4_SMEP 0x00100000 /* enable SMEP support */
+#define X86_CR4_SMAP 0x00200000 /* enable SMAP support */
+
+/*
+ * x86-64 Task Priority Register, CR8
+ */
+#define X86_CR8_TPR 0x0000000F /* task priority register */
+
+/*
+ * AMD and Transmeta use MSRs for configuration; see <asm/msr-index.h>
+ */
+
+/*
+ * NSC/Cyrix CPU configuration register indexes
+ */
+#define CX86_PCR0 0x20
+#define CX86_GCR 0xb8
+#define CX86_CCR0 0xc0
+#define CX86_CCR1 0xc1
+#define CX86_CCR2 0xc2
+#define CX86_CCR3 0xc3
+#define CX86_CCR4 0xe8
+#define CX86_CCR5 0xe9
+#define CX86_CCR6 0xea
+#define CX86_CCR7 0xeb
+#define CX86_PCR1 0xf0
+#define CX86_DIR0 0xfe
+#define CX86_DIR1 0xff
+#define CX86_ARR_BASE 0xc4
+#define CX86_RCR_BASE 0xdc
+
+
+#endif /* _UAPI_ASM_X86_PROCESSOR_FLAGS_H */
--- /dev/null
+#ifndef _UAPI_ASM_X86_PTRACE_H
+#define _UAPI_ASM_X86_PTRACE_H
+
+#include <linux/compiler.h> /* For __user */
+#include <asm/ptrace-abi.h>
+#include <asm/processor-flags.h>
+
+
+#ifndef __ASSEMBLY__
+
+#ifdef __i386__
+/* this struct defines the way the registers are stored on the
+ stack during a system call. */
+
+#ifndef __KERNEL__
+
+struct pt_regs {
+ long ebx;
+ long ecx;
+ long edx;
+ long esi;
+ long edi;
+ long ebp;
+ long eax;
+ int xds;
+ int xes;
+ int xfs;
+ int xgs;
+ long orig_eax;
+ long eip;
+ int xcs;
+ long eflags;
+ long esp;
+ int xss;
+};
+
+#endif /* __KERNEL__ */
+
+#else /* __i386__ */
+
+#ifndef __KERNEL__
+
+struct pt_regs {
+ unsigned long r15;
+ unsigned long r14;
+ unsigned long r13;
+ unsigned long r12;
+ unsigned long rbp;
+ unsigned long rbx;
+/* arguments: non interrupts/non tracing syscalls only save up to here*/
+ unsigned long r11;
+ unsigned long r10;
+ unsigned long r9;
+ unsigned long r8;
+ unsigned long rax;
+ unsigned long rcx;
+ unsigned long rdx;
+ unsigned long rsi;
+ unsigned long rdi;
+ unsigned long orig_rax;
+/* end of arguments */
+/* cpu exception frame or undefined */
+ unsigned long rip;
+ unsigned long cs;
+ unsigned long eflags;
+ unsigned long rsp;
+ unsigned long ss;
+/* top of stack page */
+};
+
+#endif /* __KERNEL__ */
+#endif /* !__i386__ */
+
+
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _UAPI_ASM_X86_PTRACE_H */
--- /dev/null
+#ifndef _UAPI_ASM_X86_SIGCONTEXT_H
+#define _UAPI_ASM_X86_SIGCONTEXT_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#define FP_XSTATE_MAGIC1 0x46505853U
+#define FP_XSTATE_MAGIC2 0x46505845U
+#define FP_XSTATE_MAGIC2_SIZE sizeof(FP_XSTATE_MAGIC2)
+
+/*
+ * bytes 464..511 in the current 512byte layout of fxsave/fxrstor frame
+ * are reserved for SW usage. On cpu's supporting xsave/xrstor, these bytes
+ * are used to extended the fpstate pointer in the sigcontext, which now
+ * includes the extended state information along with fpstate information.
+ *
+ * Presence of FP_XSTATE_MAGIC1 at the beginning of this SW reserved
+ * area and FP_XSTATE_MAGIC2 at the end of memory layout
+ * (extended_size - FP_XSTATE_MAGIC2_SIZE) indicates the presence of the
+ * extended state information in the memory layout pointed by the fpstate
+ * pointer in sigcontext.
+ */
+struct _fpx_sw_bytes {
+ __u32 magic1; /* FP_XSTATE_MAGIC1 */
+ __u32 extended_size; /* total size of the layout referred by
+ * fpstate pointer in the sigcontext.
+ */
+ __u64 xstate_bv;
+ /* feature bit mask (including fp/sse/extended
+ * state) that is present in the memory
+ * layout.
+ */
+ __u32 xstate_size; /* actual xsave state size, based on the
+ * features saved in the layout.
+ * 'extended_size' will be greater than
+ * 'xstate_size'.
+ */
+ __u32 padding[7]; /* for future use. */
+};
+
+#ifdef __i386__
+/*
+ * As documented in the iBCS2 standard..
+ *
+ * The first part of "struct _fpstate" is just the normal i387
+ * hardware setup, the extra "status" word is used to save the
+ * coprocessor status word before entering the handler.
+ *
+ * Pentium III FXSR, SSE support
+ * Gareth Hughes <gareth@valinux.com>, May 2000
+ *
+ * The FPU state data structure has had to grow to accommodate the
+ * extended FPU state required by the Streaming SIMD Extensions.
+ * There is no documented standard to accomplish this at the moment.
+ */
+struct _fpreg {
+ unsigned short significand[4];
+ unsigned short exponent;
+};
+
+struct _fpxreg {
+ unsigned short significand[4];
+ unsigned short exponent;
+ unsigned short padding[3];
+};
+
+struct _xmmreg {
+ unsigned long element[4];
+};
+
+struct _fpstate {
+ /* Regular FPU environment */
+ unsigned long cw;
+ unsigned long sw;
+ unsigned long tag;
+ unsigned long ipoff;
+ unsigned long cssel;
+ unsigned long dataoff;
+ unsigned long datasel;
+ struct _fpreg _st[8];
+ unsigned short status;
+ unsigned short magic; /* 0xffff = regular FPU data only */
+
+ /* FXSR FPU environment */
+ unsigned long _fxsr_env[6]; /* FXSR FPU env is ignored */
+ unsigned long mxcsr;
+ unsigned long reserved;
+ struct _fpxreg _fxsr_st[8]; /* FXSR FPU reg data is ignored */
+ struct _xmmreg _xmm[8];
+ unsigned long padding1[44];
+
+ union {
+ unsigned long padding2[12];
+ struct _fpx_sw_bytes sw_reserved; /* represents the extended
+ * state info */
+ };
+};
+
+#define X86_FXSR_MAGIC 0x0000
+
+#ifndef __KERNEL__
+/*
+ * User-space might still rely on the old definition:
+ */
+struct sigcontext {
+ unsigned short gs, __gsh;
+ unsigned short fs, __fsh;
+ unsigned short es, __esh;
+ unsigned short ds, __dsh;
+ unsigned long edi;
+ unsigned long esi;
+ unsigned long ebp;
+ unsigned long esp;
+ unsigned long ebx;
+ unsigned long edx;
+ unsigned long ecx;
+ unsigned long eax;
+ unsigned long trapno;
+ unsigned long err;
+ unsigned long eip;
+ unsigned short cs, __csh;
+ unsigned long eflags;
+ unsigned long esp_at_signal;
+ unsigned short ss, __ssh;
+ struct _fpstate __user *fpstate;
+ unsigned long oldmask;
+ unsigned long cr2;
+};
+#endif /* !__KERNEL__ */
+
+#else /* __i386__ */
+
+/* FXSAVE frame */
+/* Note: reserved1/2 may someday contain valuable data. Always save/restore
+ them when you change signal frames. */
+struct _fpstate {
+ __u16 cwd;
+ __u16 swd;
+ __u16 twd; /* Note this is not the same as the
+ 32bit/x87/FSAVE twd */
+ __u16 fop;
+ __u64 rip;
+ __u64 rdp;
+ __u32 mxcsr;
+ __u32 mxcsr_mask;
+ __u32 st_space[32]; /* 8*16 bytes for each FP-reg */
+ __u32 xmm_space[64]; /* 16*16 bytes for each XMM-reg */
+ __u32 reserved2[12];
+ union {
+ __u32 reserved3[12];
+ struct _fpx_sw_bytes sw_reserved; /* represents the extended
+ * state information */
+ };
+};
+
+#ifndef __KERNEL__
+/*
+ * User-space might still rely on the old definition:
+ */
+struct sigcontext {
+ __u64 r8;
+ __u64 r9;
+ __u64 r10;
+ __u64 r11;
+ __u64 r12;
+ __u64 r13;
+ __u64 r14;
+ __u64 r15;
+ __u64 rdi;
+ __u64 rsi;
+ __u64 rbp;
+ __u64 rbx;
+ __u64 rdx;
+ __u64 rax;
+ __u64 rcx;
+ __u64 rsp;
+ __u64 rip;
+ __u64 eflags; /* RFLAGS */
+ __u16 cs;
+ __u16 gs;
+ __u16 fs;
+ __u16 __pad0;
+ __u64 err;
+ __u64 trapno;
+ __u64 oldmask;
+ __u64 cr2;
+ struct _fpstate __user *fpstate; /* zero when no FPU context */
+#ifdef __ILP32__
+ __u32 __fpstate_pad;
+#endif
+ __u64 reserved1[8];
+};
+#endif /* !__KERNEL__ */
+
+#endif /* !__i386__ */
+
+struct _xsave_hdr {
+ __u64 xstate_bv;
+ __u64 reserved1[2];
+ __u64 reserved2[5];
+};
+
+struct _ymmh_state {
+ /* 16 * 16 bytes for each YMMH-reg */
+ __u32 ymmh_space[64];
+};
+
+/*
+ * Extended state pointed by the fpstate pointer in the sigcontext.
+ * In addition to the fpstate, information encoded in the xstate_hdr
+ * indicates the presence of other extended state information
+ * supported by the processor and OS.
+ */
+struct _xstate {
+ struct _fpstate fpstate;
+ struct _xsave_hdr xstate_hdr;
+ struct _ymmh_state ymmh;
+ /* new processor state extensions go here */
+};
+
+#endif /* _UAPI_ASM_X86_SIGCONTEXT_H */
--- /dev/null
+#ifndef _UAPI_ASM_X86_SIGNAL_H
+#define _UAPI_ASM_X86_SIGNAL_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/compiler.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#define NSIG 32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001u
+#define SA_NOCLDWAIT 0x00000002u
+#define SA_SIGINFO 0x00000004u
+#define SA_ONSTACK 0x08000000u
+#define SA_RESTART 0x10000000u
+#define SA_NODEFER 0x40000000u
+#define SA_RESETHAND 0x80000000u
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+#define SA_RESTORER 0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal-defs.h>
+
+#ifndef __ASSEMBLY__
+
+
+#ifdef __i386__
+# ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+# endif /* ! __KERNEL__ */
+#else /* __i386__ */
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+
+#endif /* !__i386__ */
+
+typedef struct sigaltstack {
+ void __user *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _UAPI_ASM_X86_SIGNAL_H */
--- /dev/null
+#ifndef _UAPI__SVM_H
+#define _UAPI__SVM_H
+
+#define SVM_EXIT_READ_CR0 0x000
+#define SVM_EXIT_READ_CR3 0x003
+#define SVM_EXIT_READ_CR4 0x004
+#define SVM_EXIT_READ_CR8 0x008
+#define SVM_EXIT_WRITE_CR0 0x010
+#define SVM_EXIT_WRITE_CR3 0x013
+#define SVM_EXIT_WRITE_CR4 0x014
+#define SVM_EXIT_WRITE_CR8 0x018
+#define SVM_EXIT_READ_DR0 0x020
+#define SVM_EXIT_READ_DR1 0x021
+#define SVM_EXIT_READ_DR2 0x022
+#define SVM_EXIT_READ_DR3 0x023
+#define SVM_EXIT_READ_DR4 0x024
+#define SVM_EXIT_READ_DR5 0x025
+#define SVM_EXIT_READ_DR6 0x026
+#define SVM_EXIT_READ_DR7 0x027
+#define SVM_EXIT_WRITE_DR0 0x030
+#define SVM_EXIT_WRITE_DR1 0x031
+#define SVM_EXIT_WRITE_DR2 0x032
+#define SVM_EXIT_WRITE_DR3 0x033
+#define SVM_EXIT_WRITE_DR4 0x034
+#define SVM_EXIT_WRITE_DR5 0x035
+#define SVM_EXIT_WRITE_DR6 0x036
+#define SVM_EXIT_WRITE_DR7 0x037
+#define SVM_EXIT_EXCP_BASE 0x040
+#define SVM_EXIT_INTR 0x060
+#define SVM_EXIT_NMI 0x061
+#define SVM_EXIT_SMI 0x062
+#define SVM_EXIT_INIT 0x063
+#define SVM_EXIT_VINTR 0x064
+#define SVM_EXIT_CR0_SEL_WRITE 0x065
+#define SVM_EXIT_IDTR_READ 0x066
+#define SVM_EXIT_GDTR_READ 0x067
+#define SVM_EXIT_LDTR_READ 0x068
+#define SVM_EXIT_TR_READ 0x069
+#define SVM_EXIT_IDTR_WRITE 0x06a
+#define SVM_EXIT_GDTR_WRITE 0x06b
+#define SVM_EXIT_LDTR_WRITE 0x06c
+#define SVM_EXIT_TR_WRITE 0x06d
+#define SVM_EXIT_RDTSC 0x06e
+#define SVM_EXIT_RDPMC 0x06f
+#define SVM_EXIT_PUSHF 0x070
+#define SVM_EXIT_POPF 0x071
+#define SVM_EXIT_CPUID 0x072
+#define SVM_EXIT_RSM 0x073
+#define SVM_EXIT_IRET 0x074
+#define SVM_EXIT_SWINT 0x075
+#define SVM_EXIT_INVD 0x076
+#define SVM_EXIT_PAUSE 0x077
+#define SVM_EXIT_HLT 0x078
+#define SVM_EXIT_INVLPG 0x079
+#define SVM_EXIT_INVLPGA 0x07a
+#define SVM_EXIT_IOIO 0x07b
+#define SVM_EXIT_MSR 0x07c
+#define SVM_EXIT_TASK_SWITCH 0x07d
+#define SVM_EXIT_FERR_FREEZE 0x07e
+#define SVM_EXIT_SHUTDOWN 0x07f
+#define SVM_EXIT_VMRUN 0x080
+#define SVM_EXIT_VMMCALL 0x081
+#define SVM_EXIT_VMLOAD 0x082
+#define SVM_EXIT_VMSAVE 0x083
+#define SVM_EXIT_STGI 0x084
+#define SVM_EXIT_CLGI 0x085
+#define SVM_EXIT_SKINIT 0x086
+#define SVM_EXIT_RDTSCP 0x087
+#define SVM_EXIT_ICEBP 0x088
+#define SVM_EXIT_WBINVD 0x089
+#define SVM_EXIT_MONITOR 0x08a
+#define SVM_EXIT_MWAIT 0x08b
+#define SVM_EXIT_MWAIT_COND 0x08c
+#define SVM_EXIT_XSETBV 0x08d
+#define SVM_EXIT_NPF 0x400
+
+#define SVM_EXIT_ERR -1
+
+#define SVM_EXIT_REASONS \
+ { SVM_EXIT_READ_CR0, "read_cr0" }, \
+ { SVM_EXIT_READ_CR3, "read_cr3" }, \
+ { SVM_EXIT_READ_CR4, "read_cr4" }, \
+ { SVM_EXIT_READ_CR8, "read_cr8" }, \
+ { SVM_EXIT_WRITE_CR0, "write_cr0" }, \
+ { SVM_EXIT_WRITE_CR3, "write_cr3" }, \
+ { SVM_EXIT_WRITE_CR4, "write_cr4" }, \
+ { SVM_EXIT_WRITE_CR8, "write_cr8" }, \
+ { SVM_EXIT_READ_DR0, "read_dr0" }, \
+ { SVM_EXIT_READ_DR1, "read_dr1" }, \
+ { SVM_EXIT_READ_DR2, "read_dr2" }, \
+ { SVM_EXIT_READ_DR3, "read_dr3" }, \
+ { SVM_EXIT_WRITE_DR0, "write_dr0" }, \
+ { SVM_EXIT_WRITE_DR1, "write_dr1" }, \
+ { SVM_EXIT_WRITE_DR2, "write_dr2" }, \
+ { SVM_EXIT_WRITE_DR3, "write_dr3" }, \
+ { SVM_EXIT_WRITE_DR5, "write_dr5" }, \
+ { SVM_EXIT_WRITE_DR7, "write_dr7" }, \
+ { SVM_EXIT_EXCP_BASE + DB_VECTOR, "DB excp" }, \
+ { SVM_EXIT_EXCP_BASE + BP_VECTOR, "BP excp" }, \
+ { SVM_EXIT_EXCP_BASE + UD_VECTOR, "UD excp" }, \
+ { SVM_EXIT_EXCP_BASE + PF_VECTOR, "PF excp" }, \
+ { SVM_EXIT_EXCP_BASE + NM_VECTOR, "NM excp" }, \
+ { SVM_EXIT_EXCP_BASE + MC_VECTOR, "MC excp" }, \
+ { SVM_EXIT_INTR, "interrupt" }, \
+ { SVM_EXIT_NMI, "nmi" }, \
+ { SVM_EXIT_SMI, "smi" }, \
+ { SVM_EXIT_INIT, "init" }, \
+ { SVM_EXIT_VINTR, "vintr" }, \
+ { SVM_EXIT_CPUID, "cpuid" }, \
+ { SVM_EXIT_INVD, "invd" }, \
+ { SVM_EXIT_HLT, "hlt" }, \
+ { SVM_EXIT_INVLPG, "invlpg" }, \
+ { SVM_EXIT_INVLPGA, "invlpga" }, \
+ { SVM_EXIT_IOIO, "io" }, \
+ { SVM_EXIT_MSR, "msr" }, \
+ { SVM_EXIT_TASK_SWITCH, "task_switch" }, \
+ { SVM_EXIT_SHUTDOWN, "shutdown" }, \
+ { SVM_EXIT_VMRUN, "vmrun" }, \
+ { SVM_EXIT_VMMCALL, "hypercall" }, \
+ { SVM_EXIT_VMLOAD, "vmload" }, \
+ { SVM_EXIT_VMSAVE, "vmsave" }, \
+ { SVM_EXIT_STGI, "stgi" }, \
+ { SVM_EXIT_CLGI, "clgi" }, \
+ { SVM_EXIT_SKINIT, "skinit" }, \
+ { SVM_EXIT_WBINVD, "wbinvd" }, \
+ { SVM_EXIT_MONITOR, "monitor" }, \
+ { SVM_EXIT_MWAIT, "mwait" }, \
+ { SVM_EXIT_XSETBV, "xsetbv" }, \
+ { SVM_EXIT_NPF, "npf" }
+
+
+#endif /* _UAPI__SVM_H */
--- /dev/null
+#ifndef _UAPI_ASM_X86_UNISTD_H
+#define _UAPI_ASM_X86_UNISTD_H
+
+/* x32 syscall flag bit */
+#define __X32_SYSCALL_BIT 0x40000000
+
+#ifndef __KERNEL__
+# ifdef __i386__
+# include <asm/unistd_32.h>
+# elif defined(__ILP32__)
+# include <asm/unistd_x32.h>
+# else
+# include <asm/unistd_64.h>
+# endif
+#endif
+
+#endif /* _UAPI_ASM_X86_UNISTD_H */
--- /dev/null
+#ifndef _UAPI_ASM_X86_VM86_H
+#define _UAPI_ASM_X86_VM86_H
+
+/*
+ * I'm guessing at the VIF/VIP flag usage, but hope that this is how
+ * the Pentium uses them. Linux will return from vm86 mode when both
+ * VIF and VIP is set.
+ *
+ * On a Pentium, we could probably optimize the virtual flags directly
+ * in the eflags register instead of doing it "by hand" in vflags...
+ *
+ * Linus
+ */
+
+#include <asm/processor-flags.h>
+
+#define BIOSSEG 0x0f000
+
+#define CPU_086 0
+#define CPU_186 1
+#define CPU_286 2
+#define CPU_386 3
+#define CPU_486 4
+#define CPU_586 5
+
+/*
+ * Return values for the 'vm86()' system call
+ */
+#define VM86_TYPE(retval) ((retval) & 0xff)
+#define VM86_ARG(retval) ((retval) >> 8)
+
+#define VM86_SIGNAL 0 /* return due to signal */
+#define VM86_UNKNOWN 1 /* unhandled GP fault
+ - IO-instruction or similar */
+#define VM86_INTx 2 /* int3/int x instruction (ARG = x) */
+#define VM86_STI 3 /* sti/popf/iret instruction enabled
+ virtual interrupts */
+
+/*
+ * Additional return values when invoking new vm86()
+ */
+#define VM86_PICRETURN 4 /* return due to pending PIC request */
+#define VM86_TRAP 6 /* return due to DOS-debugger request */
+
+/*
+ * function codes when invoking new vm86()
+ */
+#define VM86_PLUS_INSTALL_CHECK 0
+#define VM86_ENTER 1
+#define VM86_ENTER_NO_BYPASS 2
+#define VM86_REQUEST_IRQ 3
+#define VM86_FREE_IRQ 4
+#define VM86_GET_IRQ_BITS 5
+#define VM86_GET_AND_RESET_IRQ 6
+
+/*
+ * This is the stack-layout seen by the user space program when we have
+ * done a translation of "SAVE_ALL" from vm86 mode. The real kernel layout
+ * is 'kernel_vm86_regs' (see below).
+ */
+
+struct vm86_regs {
+/*
+ * normal regs, with special meaning for the segment descriptors..
+ */
+ long ebx;
+ long ecx;
+ long edx;
+ long esi;
+ long edi;
+ long ebp;
+ long eax;
+ long __null_ds;
+ long __null_es;
+ long __null_fs;
+ long __null_gs;
+ long orig_eax;
+ long eip;
+ unsigned short cs, __csh;
+ long eflags;
+ long esp;
+ unsigned short ss, __ssh;
+/*
+ * these are specific to v86 mode:
+ */
+ unsigned short es, __esh;
+ unsigned short ds, __dsh;
+ unsigned short fs, __fsh;
+ unsigned short gs, __gsh;
+};
+
+struct revectored_struct {
+ unsigned long __map[8]; /* 256 bits */
+};
+
+struct vm86_struct {
+ struct vm86_regs regs;
+ unsigned long flags;
+ unsigned long screen_bitmap;
+ unsigned long cpu_type;
+ struct revectored_struct int_revectored;
+ struct revectored_struct int21_revectored;
+};
+
+/*
+ * flags masks
+ */
+#define VM86_SCREEN_BITMAP 0x0001
+
+struct vm86plus_info_struct {
+ unsigned long force_return_for_pic:1;
+ unsigned long vm86dbg_active:1; /* for debugger */
+ unsigned long vm86dbg_TFpendig:1; /* for debugger */
+ unsigned long unused:28;
+ unsigned long is_vm86pus:1; /* for vm86 internal use */
+ unsigned char vm86dbg_intxxtab[32]; /* for debugger */
+};
+struct vm86plus_struct {
+ struct vm86_regs regs;
+ unsigned long flags;
+ unsigned long screen_bitmap;
+ unsigned long cpu_type;
+ struct revectored_struct int_revectored;
+ struct revectored_struct int21_revectored;
+ struct vm86plus_info_struct vm86plus;
+};
+
+
+#endif /* _UAPI_ASM_X86_VM86_H */
--- /dev/null
+/*
+ * vmx.h: VMX Architecture related definitions
+ * Copyright (c) 2004, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * A few random additions are:
+ * Copyright (C) 2006 Qumranet
+ * Avi Kivity <avi@qumranet.com>
+ * Yaniv Kamay <yaniv@qumranet.com>
+ *
+ */
+#ifndef _UAPIVMX_H
+#define _UAPIVMX_H
+
+
+#define VMX_EXIT_REASONS_FAILED_VMENTRY 0x80000000
+
+#define EXIT_REASON_EXCEPTION_NMI 0
+#define EXIT_REASON_EXTERNAL_INTERRUPT 1
+#define EXIT_REASON_TRIPLE_FAULT 2
+
+#define EXIT_REASON_PENDING_INTERRUPT 7
+#define EXIT_REASON_NMI_WINDOW 8
+#define EXIT_REASON_TASK_SWITCH 9
+#define EXIT_REASON_CPUID 10
+#define EXIT_REASON_HLT 12
+#define EXIT_REASON_INVD 13
+#define EXIT_REASON_INVLPG 14
+#define EXIT_REASON_RDPMC 15
+#define EXIT_REASON_RDTSC 16
+#define EXIT_REASON_VMCALL 18
+#define EXIT_REASON_VMCLEAR 19
+#define EXIT_REASON_VMLAUNCH 20
+#define EXIT_REASON_VMPTRLD 21
+#define EXIT_REASON_VMPTRST 22
+#define EXIT_REASON_VMREAD 23
+#define EXIT_REASON_VMRESUME 24
+#define EXIT_REASON_VMWRITE 25
+#define EXIT_REASON_VMOFF 26
+#define EXIT_REASON_VMON 27
+#define EXIT_REASON_CR_ACCESS 28
+#define EXIT_REASON_DR_ACCESS 29
+#define EXIT_REASON_IO_INSTRUCTION 30
+#define EXIT_REASON_MSR_READ 31
+#define EXIT_REASON_MSR_WRITE 32
+#define EXIT_REASON_INVALID_STATE 33
+#define EXIT_REASON_MWAIT_INSTRUCTION 36
+#define EXIT_REASON_MONITOR_INSTRUCTION 39
+#define EXIT_REASON_PAUSE_INSTRUCTION 40
+#define EXIT_REASON_MCE_DURING_VMENTRY 41
+#define EXIT_REASON_TPR_BELOW_THRESHOLD 43
+#define EXIT_REASON_APIC_ACCESS 44
+#define EXIT_REASON_EPT_VIOLATION 48
+#define EXIT_REASON_EPT_MISCONFIG 49
+#define EXIT_REASON_WBINVD 54
+#define EXIT_REASON_XSETBV 55
+#define EXIT_REASON_INVPCID 58
+
+#define VMX_EXIT_REASONS \
+ { EXIT_REASON_EXCEPTION_NMI, "EXCEPTION_NMI" }, \
+ { EXIT_REASON_EXTERNAL_INTERRUPT, "EXTERNAL_INTERRUPT" }, \
+ { EXIT_REASON_TRIPLE_FAULT, "TRIPLE_FAULT" }, \
+ { EXIT_REASON_PENDING_INTERRUPT, "PENDING_INTERRUPT" }, \
+ { EXIT_REASON_NMI_WINDOW, "NMI_WINDOW" }, \
+ { EXIT_REASON_TASK_SWITCH, "TASK_SWITCH" }, \
+ { EXIT_REASON_CPUID, "CPUID" }, \
+ { EXIT_REASON_HLT, "HLT" }, \
+ { EXIT_REASON_INVLPG, "INVLPG" }, \
+ { EXIT_REASON_RDPMC, "RDPMC" }, \
+ { EXIT_REASON_RDTSC, "RDTSC" }, \
+ { EXIT_REASON_VMCALL, "VMCALL" }, \
+ { EXIT_REASON_VMCLEAR, "VMCLEAR" }, \
+ { EXIT_REASON_VMLAUNCH, "VMLAUNCH" }, \
+ { EXIT_REASON_VMPTRLD, "VMPTRLD" }, \
+ { EXIT_REASON_VMPTRST, "VMPTRST" }, \
+ { EXIT_REASON_VMREAD, "VMREAD" }, \
+ { EXIT_REASON_VMRESUME, "VMRESUME" }, \
+ { EXIT_REASON_VMWRITE, "VMWRITE" }, \
+ { EXIT_REASON_VMOFF, "VMOFF" }, \
+ { EXIT_REASON_VMON, "VMON" }, \
+ { EXIT_REASON_CR_ACCESS, "CR_ACCESS" }, \
+ { EXIT_REASON_DR_ACCESS, "DR_ACCESS" }, \
+ { EXIT_REASON_IO_INSTRUCTION, "IO_INSTRUCTION" }, \
+ { EXIT_REASON_MSR_READ, "MSR_READ" }, \
+ { EXIT_REASON_MSR_WRITE, "MSR_WRITE" }, \
+ { EXIT_REASON_MWAIT_INSTRUCTION, "MWAIT_INSTRUCTION" }, \
+ { EXIT_REASON_MONITOR_INSTRUCTION, "MONITOR_INSTRUCTION" }, \
+ { EXIT_REASON_PAUSE_INSTRUCTION, "PAUSE_INSTRUCTION" }, \
+ { EXIT_REASON_MCE_DURING_VMENTRY, "MCE_DURING_VMENTRY" }, \
+ { EXIT_REASON_TPR_BELOW_THRESHOLD, "TPR_BELOW_THRESHOLD" }, \
+ { EXIT_REASON_APIC_ACCESS, "APIC_ACCESS" }, \
+ { EXIT_REASON_EPT_VIOLATION, "EPT_VIOLATION" }, \
+ { EXIT_REASON_EPT_MISCONFIG, "EPT_MISCONFIG" }, \
+ { EXIT_REASON_WBINVD, "WBINVD" }
+
+
+#endif /* _UAPIVMX_H */
--- /dev/null
+#ifndef _UAPI_ASM_X86_VSYSCALL_H
+#define _UAPI_ASM_X86_VSYSCALL_H
+
+enum vsyscall_num {
+ __NR_vgettimeofday,
+ __NR_vtime,
+ __NR_vgetcpu,
+};
+
+#define VSYSCALL_START (-10UL << 20)
+#define VSYSCALL_SIZE 1024
+#define VSYSCALL_END (-2UL << 20)
+#define VSYSCALL_MAPPED_PAGES 1
+#define VSYSCALL_ADDR(vsyscall_nr) (VSYSCALL_START+VSYSCALL_SIZE*(vsyscall_nr))
+
+
+#endif /* _UAPI_ASM_X86_VSYSCALL_H */
projects / profile / common / kernel-common.git / commitdiff