rtc: kconfig cleanup

Remove double spaces and adds some suggestions.  It also fixes the
descriptions of options that are no more available as modules.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index fe1d7a2..92c2db6 100644 (file)
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -35,8 +35,8 @@ config RTC_HCTOSYS_DEVICE
        default "rtc0"
        help
          The RTC device that will be used to (re)initialize the system
-         clock, usually rtc0.  Initialization is done when the system
-         starts up, and when it resumes from a low power state.  This
+         clock, usually rtc0. Initialization is done when the system
+         starts up, and when it resumes from a low power state. This
          device should record time in UTC, since the kernel won't do
          timezone correction.
 
@@ -44,7 +44,7 @@ config RTC_HCTOSYS_DEVICE
          functions run, so it must usually be statically linked.
 
          This clock should be battery-backed, so that it reads the correct
-         time when the system boots from a power-off state.  Otherwise, your
+         time when the system boots from a power-off state. Otherwise, your
          system will need an external clock source (like an NTP server).
 
          If the clock you specify here is not battery backed, it may still
@@ -69,8 +69,7 @@ config RTC_INTF_SYSFS
          Say yes here if you want to use your RTCs using sysfs interfaces,
          /sys/class/rtc/rtc0 through /sys/.../rtcN.
 
-         This driver can also be built as a module. If so, the module
-         will be called rtc-sysfs.
+         If unsure, say Y.
 
 config RTC_INTF_PROC
        boolean "/proc/driver/rtc (procfs for rtc0)"
@@ -78,11 +77,10 @@ config RTC_INTF_PROC
        default RTC_CLASS
        help
          Say yes here if you want to use your first RTC through the proc
-         interface, /proc/driver/rtc.  Other RTCs will not be available
+         interface, /proc/driver/rtc. Other RTCs will not be available
          through that API.
 
-         This driver can also be built as a module. If so, the module
-         will be called rtc-proc.
+         If unsure, say Y.
 
 config RTC_INTF_DEV
        boolean "/dev/rtcN (character devices)"
@@ -90,12 +88,14 @@ config RTC_INTF_DEV
        help
          Say yes here if you want to use your RTCs using the /dev
          interfaces, which "udev" sets up as /dev/rtc0 through
-         /dev/rtcN.  You may want to set up a symbolic link so one
-         of these can be accessed as /dev/rtc, which is a name
-         expected by "hwclock" and some other programs.
+         /dev/rtcN.
 
-         This driver can also be built as a module. If so, the module
-         will be called rtc-dev.
+         You may want to set up a symbolic link so one of these
+         can be accessed as /dev/rtc, which is a name
+         expected by "hwclock" and some other programs. Recent
+         versions of "udev" are known to set up the symlink for you.
+
+         If unsure, say Y.
 
 config RTC_INTF_DEV_UIE_EMUL
        bool "RTC UIE emulation on dev interface"
@@ -132,14 +132,14 @@ config RTC_DRV_DS1307
        tristate "Dallas/Maxim DS1307/37/38/39/40, ST M41T00"
        help
          If you say yes here you get support for various compatible RTC
-         chips (often with battery backup) connected with I2C.  This driver
+         chips (often with battery backup) connected with I2C. This driver
          should handle DS1307, DS1337, DS1338, DS1339, DS1340, ST M41T00,
-         and probably other chips.  In some cases the RTC must already
+         and probably other chips. In some cases the RTC must already
          have been initialized (by manufacturing or a bootloader).
 
          The first seven registers on these chips hold an RTC, and other
          registers may add features such as NVRAM, a trickle charger for
-         the RTC/NVRAM backup power, and alarms.  NVRAM is visible in
+         the RTC/NVRAM backup power, and alarms. NVRAM is visible in
          sysfs, but other chip features may not be available.
 
          This driver can also be built as a module. If so, the module
@@ -150,10 +150,10 @@ config RTC_DRV_DS1374
        depends on RTC_CLASS && I2C
        help
          If you say yes here you get support for Dallas Semiconductor
-         DS1374 real-time clock chips.  If an interrupt is associated
+         DS1374 real-time clock chips. If an interrupt is associated
          with the device, the alarm functionality is supported.
 
-         This driver can also be built as a module.  If so, the module
+         This driver can also be built as a module. If so, the module
          will be called rtc-ds1374.
 
 config RTC_DRV_DS1672
@@ -247,7 +247,7 @@ config RTC_DRV_TWL92330
        help
          If you say yes here you get support for the RTC on the
          TWL92330 "Menelaus" power management chip, used with OMAP2
-         platforms.  The support is integrated with the rest of
+         platforms. The support is integrated with the rest of
          the Menelaus driver; it's not separate module.
 
 config RTC_DRV_TWL4030
@@ -308,7 +308,7 @@ config RTC_DRV_DS1305
        tristate "Dallas/Maxim DS1305/DS1306"
        help
          Select this driver to get support for the Dallas/Maxim DS1305
-         and DS1306 real time clock chips.  These support a trickle
+         and DS1306 real time clock chips. These support a trickle
          charger, alarms, and NVRAM in addition to the clock.
 
          This driver can also be built as a module. If so, the module
@@ -382,7 +382,7 @@ config RTC_DRV_CMOS
          or LPC bus chips, and so on.
 
          Your system will need to define the platform device used by
-         this driver, otherwise it won't be accessible.  This means
+         this driver, otherwise it won't be accessible. This means
          you can safely enable this driver if you don't know whether
          or not your board has this kind of hardware.
 
@@ -599,7 +599,7 @@ config RTC_DRV_AT91RM9200
        depends on ARCH_AT91RM9200 || ARCH_AT91SAM9RL
        help
          Driver for the internal RTC (Realtime Clock) module found on
-         Atmel AT91RM9200's and AT91SAM9RL chips.  On SAM9RL chips
+         Atmel AT91RM9200's and AT91SAM9RL chips. On SAM9RL chips
          this is powered by the backup power supply.
 
 config RTC_DRV_AT91SAM9
@@ -621,8 +621,8 @@ config RTC_DRV_AT91SAM9_RTT
        prompt "RTT module Number" if ARCH_AT91SAM9263
        depends on RTC_DRV_AT91SAM9
        help
-         More than one RTT module is available.  You can choose which
-         one will be used as an RTC.  The default of zero is normally
+         More than one RTT module is available. You can choose which
+         one will be used as an RTC. The default of zero is normally
          OK to use, though some systems use that for non-RTC purposes.
 
 config RTC_DRV_AT91SAM9_GPBR
@@ -634,8 +634,8 @@ config RTC_DRV_AT91SAM9_GPBR
        depends on RTC_DRV_AT91SAM9
        help
          The RTC driver needs to use one of the General Purpose Backup
-         Registers (GPBRs) as well as the RTT.  You can choose which one
-         will be used.  The default of zero is normally OK to use, but
+         Registers (GPBRs) as well as the RTT. You can choose which one
+         will be used. The default of zero is normally OK to use, but
          on some systems other software needs to use that register.
 
 config RTC_DRV_BFIN