SMC91x ETHERNET DRIVER
M: Nicolas Pitre <nico@fluxnic.net>
S: Odd Fixes
-F: drivers/net/smc91x.*
+F: drivers/net/ethernet/smsc/smc91x.*
SMM665 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>
L: netdev@vger.kernel.org
S: Supported
F: include/linux/smsc911x.h
-F: drivers/net/smsc911x.*
+F: drivers/net/ethernet/smsc/smsc911x.*
SMSC9420 PCI ETHERNET DRIVER
M: Steve Glendinning <steve.glendinning@smsc.com>
L: netdev@vger.kernel.org
S: Supported
-F: drivers/net/smsc9420.*
+F: drivers/net/ethernet/smsc/smsc9420.*
SN-IA64 (Itanium) SUB-PLATFORM
M: Jes Sorensen <jes@sgi.com>
help
To support the IEEE 1588 Precision Time Protocol (PTP), select y here
-config SMC9194
- tristate "SMC 9194 support"
- depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
- select CRC32
- ---help---
- This is support for the SMC9xxx based Ethernet cards. Choose this
- option if you have a DELL laptop with the docking station, or
- another SMC9192/9194 based chipset. Say Y if you want it compiled
- into the kernel, and read the file
- <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called smc9194.
-
-config SMC91X
- tristate "SMC 91C9x/91C1xxx support"
- select CRC32
- select MII
- depends on ARM || M32R || SUPERH || \
- MIPS || BLACKFIN || MN10300 || COLDFIRE
- help
- This is a driver for SMC's 91x series of Ethernet chipsets,
- including the SMC91C94 and the SMC91C111. Say Y if you want it
- compiled into the kernel, and read the file
- <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called smc91x. If you want to compile it as a
- module, say M here and read <file:Documentation/kbuild/modules.txt>.
-
config PXA168_ETH
tristate "Marvell pxa168 ethernet support"
depends on CPU_PXA168
help
Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC.
-config SMC911X
- tristate "SMSC LAN911[5678] support"
- select CRC32
- select MII
- depends on ARM || SUPERH || MN10300
- help
- This is a driver for SMSC's LAN911x series of Ethernet chipsets
- including the new LAN9115, LAN9116, LAN9117, and LAN9118.
- Say Y if you want it compiled into the kernel,
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- This driver is also available as a module. The module will be
- called smc911x. If you want to compile it as a module, say M
- here and read <file:Documentation/kbuild/modules.txt>
-
-config SMSC911X
- tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
- depends on ARM || SUPERH || BLACKFIN || MIPS || MN10300
- select CRC32
- select MII
- select PHYLIB
- ---help---
- Say Y here if you want support for SMSC LAN911x and LAN921x families
- of ethernet controllers.
-
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
- will be called smsc911x.
-
-config SMSC911X_ARCH_HOOKS
- def_bool n
- depends on SMSC911X
- help
- If the arch enables this, it allows the arch to implement various
- hooks for more comprehensive interrupt control and also to override
- the source of the MAC address.
-
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
depends on ISA
To compile this driver as a module, choose M here: the module
will be called sis900. This is recommended.
-config EPIC100
- tristate "SMC EtherPower II"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- help
- This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
- which is based on the SMC83c17x (EPIC/100).
- More specific information and updates are available from
- <http://www.scyld.com/network/epic100.html>.
-
-config SMSC9420
- tristate "SMSC LAN9420 PCI ethernet adapter support"
- depends on NET_PCI && PCI
- select CRC32
- select PHYLIB
- select SMSC_PHY
- help
- This is a driver for SMSC's LAN9420 PCI ethernet adapter.
- Say Y if you want it compiled into the kernel,
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- This driver is also available as a module. The module will be
- called smsc9420. If you want to compile it as a module, say M
- here and read <file:Documentation/kbuild/modules.txt>
-
config SUNDANCE
tristate "Sundance Alta support"
depends on NET_PCI && PCI
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
-config NETXEN_NIC
- tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
- depends on PCI
- select FW_LOADER
- help
- This enables the support for NetXen's Gigabit Ethernet card.
-
config NIU
tristate "Sun Neptune 10Gbit Ethernet support"
depends on PCI
obj-$(CONFIG_BMAC) += bmac.o
obj-$(CONFIG_TLAN) += tlan.o
-obj-$(CONFIG_EPIC100) += epic100.o
-obj-$(CONFIG_SMSC9420) += smsc9420.o
obj-$(CONFIG_SIS190) += sis190.o
obj-$(CONFIG_SIS900) += sis900.o
obj-$(CONFIG_R6040) += r6040.o
obj-$(CONFIG_SEEQ8005) += seeq8005.o
obj-$(CONFIG_NET_SB1000) += sb1000.o
obj-$(CONFIG_HP100) += hp100.o
-obj-$(CONFIG_SMC9194) += smc9194.o
obj-$(CONFIG_FEC) += fec.o
obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
obj-$(CONFIG_S2IO) += s2io.o
obj-$(CONFIG_VXGE) += vxge/
obj-$(CONFIG_MYRI10GE) += myri10ge/
-obj-$(CONFIG_SMC91X) += smc91x.o
-obj-$(CONFIG_SMC911X) += smc911x.o
-obj-$(CONFIG_SMSC911X) += smsc911x.o
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
obj-$(CONFIG_FS_ENET) += fs_enet/
-obj-$(CONFIG_NETXEN_NIC) += netxen/
obj-$(CONFIG_NIU) += niu.o
obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
obj-$(CONFIG_SFC) += sfc/
If unsure, say N.
-config NET_VENDOR_SMC
- bool "Western Digital/SMC cards"
- depends on (ISA || MCA || EISA || MAC)
- ---help---
- If you have a network (Ethernet) card belonging to this class, say Y
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about Western Digital cards. If you say Y, you will be
- asked for your specific card in the following questions.
-
config ULTRAMCA
tristate "SMC Ultra MCA support"
- depends on NET_VENDOR_SMC && MCA
+ depends on MCA
select CRC32
---help---
If you have a network (Ethernet) card of this type and are running
config ULTRA
tristate "SMC Ultra support"
- depends on NET_VENDOR_SMC && ISA
+ depends on ISA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
config ULTRA32
tristate "SMC Ultra32 EISA support"
- depends on NET_VENDOR_SMC && EISA
+ depends on EISA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
config WD80x3
tristate "WD80*3 support"
- depends on NET_VENDOR_SMC && ISA
+ depends on ISA
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
source "drivers/net/ethernet/chelsio/Kconfig"
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
+source "drivers/net/ethernet/smsc/Kconfig"
endif # ETHERNET
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
+obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
--- /dev/null
+#
+# Western Digital/SMC network device configuration
+#
+
+config NET_VENDOR_SMSC
+ bool "SMC (SMSC)/Western Digital devices"
+ depends on ARM || ISA || MAC || ARM || MIPS || M32R || SUPERH || \
+ BLACKFIN || MN10300 || COLDFIRE || PCI || PCMCIA
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about SMC/Western Digital cards. If you say Y, you will
+ be asked for your specific card in the following questions.
+
+if NET_VENDOR_SMSC
+
+config SMC9194
+ tristate "SMC 9194 support"
+ depends on (ISA || MAC && BROKEN)
+ select CRC32
+ ---help---
+ This is support for the SMC9xxx based Ethernet cards. Choose this
+ option if you have a DELL laptop with the docking station, or
+ another SMC9192/9194 based chipset. Say Y if you want it compiled
+ into the kernel, and read the file
+ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called smc9194.
+
+config SMC91X
+ tristate "SMC 91C9x/91C1xxx support"
+ select CRC32
+ select MII
+ depends on (ARM || M32R || SUPERH || MIPS || BLACKFIN || \
+ MN10300 || COLDFIRE)
+ ---help---
+ This is a driver for SMC's 91x series of Ethernet chipsets,
+ including the SMC91C94 and the SMC91C111. Say Y if you want it
+ compiled into the kernel, and read the file
+ <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ This driver is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called smc91x. If you want to compile it as a
+ module, say M here and read <file:Documentation/kbuild/modules.txt>.
+
+config PCMCIA_SMC91C92
+ tristate "SMC 91Cxx PCMCIA support"
+ depends on PCMCIA
+ select CRC32
+ select MII
+ ---help---
+ Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
+ (PC-card) Ethernet or Fast Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called smc91c92_cs. If unsure, say N.
+
+config EPIC100
+ tristate "SMC EtherPower II"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
+ which is based on the SMC83c17x (EPIC/100).
+ More specific information and updates are available from
+ <http://www.scyld.com/network/epic100.html>.
+
+config SMC911X
+ tristate "SMSC LAN911[5678] support"
+ select CRC32
+ select MII
+ depends on (ARM || SUPERH || MN10300)
+ ---help---
+ This is a driver for SMSC's LAN911x series of Ethernet chipsets
+ including the new LAN9115, LAN9116, LAN9117, and LAN9118.
+ Say Y if you want it compiled into the kernel,
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ This driver is also available as a module. The module will be
+ called smc911x. If you want to compile it as a module, say M
+ here and read <file:Documentation/kbuild/modules.txt>
+
+config SMSC911X
+ tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
+ depends on (ARM || SUPERH || BLACKFIN || MIPS || MN10300)
+ select CRC32
+ select MII
+ select PHYLIB
+ ---help---
+ Say Y here if you want support for SMSC LAN911x and LAN921x families
+ of ethernet controllers.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module
+ will be called smsc911x.
+
+config SMSC911X_ARCH_HOOKS
+ def_bool n
+ depends on SMSC911X
+ ---help---
+ If the arch enables this, it allows the arch to implement various
+ hooks for more comprehensive interrupt control and also to override
+ the source of the MAC address.
+
+config SMSC9420
+ tristate "SMSC LAN9420 PCI ethernet adapter support"
+ depends on PCI
+ select CRC32
+ select PHYLIB
+ select SMSC_PHY
+ ---help---
+ This is a driver for SMSC's LAN9420 PCI ethernet adapter.
+ Say Y if you want it compiled into the kernel,
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ This driver is also available as a module. The module will be
+ called smsc9420. If you want to compile it as a module, say M
+ here and read <file:Documentation/kbuild/modules.txt>
+
+endif # NET_VENDOR_SMSC
--- /dev/null
+#
+# Makefile for the SMSC network device drivers.
+#
+
+obj-$(CONFIG_SMC9194) += smc9194.o
+obj-$(CONFIG_SMC91X) += smc91x.o
+obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o
+obj-$(CONFIG_EPIC100) += epic100.o
+obj-$(CONFIG_SMSC9420) += smsc9420.o
+obj-$(CONFIG_SMC911X) += smc911x.o
+obj-$(CONFIG_SMSC911X) += smsc911x.o
To compile this driver as a module, choose M here: the module will be
called fmvj18x_cs. If unsure, say N.
-config PCMCIA_SMC91C92
- tristate "SMC 91Cxx PCMCIA support"
- select CRC32
- select MII
- help
- Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
- (PC-card) Ethernet or Fast Ethernet card to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called smc91c92_cs. If unsure, say N.
-
config PCMCIA_XIRC2PS
tristate "Xircom 16-bit PCMCIA support"
help
# 16-bit client drivers
obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
-obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o
obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o
obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o